BS ISO 16245:2009
|
Information and documentation. Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
DIN EN 15425:2015-06 (Draft)
|
ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
15/30329437 DC : 0
|
BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
PREN 14869-1 : DRAFT 2010
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
BS EN 16556:2014
|
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
05/30132008 DC : DRAFT APR 2005
|
BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
BS ISO 16525-1:2014
|
Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
DIN EN 16556 E : 2015
|
DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
I.S. EN 1967:2002
|
STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
PD CEN/TR 14548:2003
|
Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
PREN 1372 : DRAFT 2014
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
10/30231817 DC : 0
|
BS EN 12705 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
10/30231826 DC : 0
|
BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
UNI CEN/TS 14999 : 2013
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST IN STORAGE CONTAINER |
06/30155808 DC : DRAFT SEP 2006
|
BS EN 13999-4 - ADHESIVES - SHORT-TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
DIN ISO 16245:2012-05
|
Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents (ISO 16245:2009) |
11/30253733 DC : 0
|
BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
02/121758 DC : DRAFT APR 2002
|
BS EN ISO 9311-3 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 3: TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE |
15/30296765 DC : 0
|
BS EN 15425 - ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
10/30231838 DC : DRAFT SEP 2010
|
BS EN 1965-1 - STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
14/30296756 DC : 0
|
BS EN 1902 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
03/306598 DC : DRAFT APR 2003
|
EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
09/30206195 DC : 0
|
BS EN ISO 9311-2 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
12/30248096 DC : 0
|
BS ISO 17178 - ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
15/30317333 DC : 0
|
BS EN 205 - ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
PREN 2642 : 200P1
|
AEROSPACE SERIES - STRUCTURAL ADHESIVE SYSTEMS - ADHESIVE FILM - TECHNICAL SPECIFICATION |
UNE-EN 15425:2017
|
Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
I.S. CR 14376:2002
|
ADHESIVES - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DESCRIPTION AND ASSESSMENT OF THE SETTING PROCESS |
PREN 1373 : DRAFT 2014
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
I.S. EN 301:2017
|
ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
CEN/TR 16953:2017
|
Medical gloves for single use - Guidance for selection |
DIN EN 14258 E : 2005
|
STRUCTURAL ADHESIVES - MECHANICAL BEHAVIOUR OF BONDED JOINTS SUBJECTED TO SHORT AND LONG TERMS EXPOSURE AT SPECIFIED CONDITIONS OF TEMPERATURE |
DIN EN 13999-1:2014-03
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
DIN EN 13415:2010-05
|
TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
DIN EN 14256 E : 2007
|
ADHESIVES FOR NON-STRUCTURAL WOOD APPLICATIONS - TEST METHOD AND REQUIREMENTS FOR RESISTANCE TO STATIC LOAD |
DIN EN 14259 E : 2004
|
ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
UNE-EN 1373:2015
|
Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
UNE-EN 301:2014
|
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
BS EN 14869-2:2011
|
Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test |
BS EN 827:2005
|
Adhesives. Determination of conventional solids content and constant mass solids content |
BS EN 1965-2:2011
|
Structural adhesives. Corrosion Determination and classification of corrosion to a brass substrate |
UNE-EN 1372:2015
|
Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
BS EN 1246:1998
|
Adhesives. Determination of ash and sulfated ash |
BS EN 12703:2012
|
Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature |
BS EN ISO 14678:2005
|
Adhesives. Determination of resistance to flow (sagging) |
BS EN 14258:2004
|
Structural adhesives. Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
BS EN 14713:2005
|
Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding |
BS EN 15416-5:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of minimum pressing time under referenced conditions |
BS EN 543:2003
|
Adhesives. Determination of apparent density of powder and granule adhesives |
UNE-EN 205:2016
|
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
UNE-EN 13999-1:2014
|
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
UNE-EN 14680:2016
|
Adhesives for non-pressure thermoplastics piping systems - Specifications |
UNE-EN 14869-1:2011
|
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
BS EN ISO 9311-1:2005
|
Adhesives for thermoplastics piping systems Determination of film properties |
BS EN 1067:2005
|
Adhesives. Examination and preparation of samples for testing |
UNE-EN 14814:2016
|
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
BS EN 1895:2001
|
Adhesives for paper and board, packaging and disposable sanitary products. 180°. \'T\' peel test for a flexible-to-flexible assembly |
DIN EN 1967:2003-02
|
STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
I.S. EN 13999-4:2007
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
DIN EN 1245:2011-07
|
Adhesives - Determination of pH |
EN 13415:2010
|
Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
DIN EN 14173:2002-04
|
STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
UNI CEN ISO/TR 16178 : 2014
|
FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS |
EN 12961:2001/A1:2005
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF OPTIMUM ACTIVATION TEMPERATURES AND MAXIMUM ACTIVATION LIFE OF SOLVENT-BASED AND DISPERSION ADHESIVES |
EN 12705:2011
|
Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
DIN EN 15062:2006-08
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
CEN/TS 14999:2013
|
Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container |
EN 12704:2016
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
EN 1243:2011
|
Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
EN 1246:1998
|
Adhesives - Determination of ash and sulphated ash |
DIN EN 12092:2002-02
|
ADHESIVES - DETERMINATION OF VISCOSITY |
EN 12436:2001
|
Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements |
EN 1241:1998
|
Adhesives - Determination of acid value |
EN 1238:2011
|
Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
EN 12963:2001
|
Adhesives - Determination of free monomer content in adhesives based on synthetic polymers |
DIN EN 14258:2005-02
|
Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
EN 1239:2011
|
Adhesives - Freeze-thaw stability |
EN 12962:2011
|
Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
EN 1245:2011
|
Adhesives - Determination of pH |
EN 12960:2001/AC:2007
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF SHEAR RESISTANCE |
EN 50050:2006
|
Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
EN 1242:2013
|
Adhesives - Determination of isocyanate content |
PREN 302-6 : DRAFT 2011
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
PREN 1238 : DRAFT 2010
|
ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
05/19992419 DC : DRAFT MAY 2005
|
BS EN 14256 - ADHESIVES FOR NON-STRUCTURAL WOOD APPLICATIONS - TEST METHOD AND REQUIREMENTS FOR RESISTANCE TO STATIC LOAD |
DIN 8063-10:2002-06
|
PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 10: WALL BRACKET ELBOWS - DIMENSIONS |
12/30259191 DC : DRAFT JULY 2012
|
BS EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
05/30131014 DC : DRAFT MAR 2005
|
EN 15190 - STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
PREN 15416-5 : DRAFT 2015
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
DIN EN 16556:2015-01
|
DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
11/30247568 DC : 0
|
BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
ISO 19209:2017
|
Adhesives — Classification of thermoplastic wood adhesives for non-structural applications |
PREN 15416-3 : DRAFT 2015
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
BS ISO 19210:2017
|
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
06/30155802 DC : DRAFT SEP 2006
|
BS EN 13999-2 - ADHESIVES - SHORT-TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
15/30296768 DC : 0
|
BS EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
15/30329434 DC : 0
|
BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
11/30245850 DC : 0
|
BS EN 302-7 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
05/30135769 DC : DRAFT JUL 2005
|
EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
14/30296759 DC : 0
|
BS EN 1903 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
10/30231832 DC : 0
|
BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
CR 14376:2002
|
Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process |
08/30180281 DC : DRAFT JUNE 2008
|
BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
11/30247565 DC : 0
|
BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
PREN 15416-4 : DRAFT 2015
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
BS EN 15425:2017
|
Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements |
15/30293506 DC : 0
|
BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
PREN 15275 : DRAFT 2014
|
STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
04/30123591 DC : DRAFT OCT 2004
|
EN 15062 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
PREN 14814 : DRAFT 2015
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
UNE-EN 15416-3:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
ISO 17212:2012
|
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding |
I.S. ENV 302-5:2002
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF THE CONVENTIONAL ASSEMBLY TIME |
I.S. EN 50050:2006
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT |
I.S. EN 15416-1:2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
BS EN 301:2017
|
Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements |
PD CEN/TR 16953:2017
|
Medical gloves for single use. Guidance for selection |
PREN 302-7 : DRAFT 2011
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
DIN EN 15416-3 E : 2010
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
DIN EN 1392:2006-08
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
DIN EN 1242:2013-05
|
ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
DIN EN 13999-2:2014-03
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
DIN EN 12962:2011-07
|
Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
DIN EN 1464:2010-06
|
Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
DIN EN 12705:2011-08
|
Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
DIN EN 12704:2016-10
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
DIN EN 1243:2011-07
|
Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
DIN EN 302-1:2013-06
|
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
DIN EN 14814:2008-03
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
DIN EN 15416-5:2015-06 (Draft)
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
DIN EN ISO 9311-3:2005-06
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 3: TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE |
DIN EN 14294:2010-06
|
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
DIN EN 14713:2016-10
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
DIN EN 15416-4:2015-06 (Draft)
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
BS EN 1238:1999
|
Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball) |
BS EN 14259:2003
|
Adhesives for floor covering. Requirements for mechanical and electrical performance |
BS EN 14814:2016
|
Adhesives for thermoplastic piping systems for fluids under pressure. Specifications |
BS EN 1902:2015
|
Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test |
BS EN 828:2013
|
Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface |
BS EN 13999-3 : 2007
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
DIN EN 15274:2015-06
|
GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
BS EN 1244:1998
|
Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
BS EN 15307:2014
|
Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
BS EN 1720:1999
|
Adhesives for paper and board, packaging and disposable sanitary products. Determination of dispersability |
UNE-EN 14022:2010
|
Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
BS EN 1967:2002
|
Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
I.S. EN 827:2006
|
ADHESIVES - DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT |
I.S. EN 1242:2013
|
ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
DIN EN 1902:2015-07
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
I.S. EN 828:2013
|
ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
I.S. EN 12704:2016
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
I.S. EN 205:2016
|
ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
DIN EN 1240:2011-07
|
Adhesives - Determination of hydroxyl value and/or hydroxyl content |
I.S. EN 302-7:2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
I.S. EN 14259:2004
|
ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
I.S. EN 1238:2011
|
ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
EN 14259 : 2003
|
ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
I.S. EN 1239:2011
|
ADHESIVES - FREEZE-THAW STABILITY |
I.S. EN 13999-2:2013
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
I.S. EN 1240:2011
|
ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
I.S. EN 1067:2006
|
ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
I.S. EN 12962:2011
|
ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
I.S. EN 302-1:2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
I.S. EN 1965-2:2011
|
STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
DIN EN 1239:2011-07
|
Adhesives - Freeze-thaw stability |
DIN EN 1903:2015-07
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
I.S. EN 1392:2006
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
I.S. EN 15307:2014
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
I.S. EN 14680:2015
|
ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
I.S. EN ISO 9311-2:2011
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
I.S. EN 1464:2010
|
ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
I.S. EN 14869-1:2011
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
I.S. EN 1965-1:2011
|
STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
I.S. EN 14869-2:2011
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
I.S. EN 15416-4:2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME FOR ONE COMPONENT POLYURETHANE ADHESIVES |
I.S. EN 1966:2009
|
STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
S.R. CEN/TS 14472-1:2003
|
RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL |
I.S. EN 14294:2010
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
I.S. EN 12765:2016
|
CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
I.S. EN 13999-1:2013
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
I.S. EN 14814:2016
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
I.S. EN 13999-3:2007
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
I.S. EN 14293:2006
|
ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
I.S. EN 302-6:2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
I.S. EN 1245:2011
|
ADHESIVES - DETERMINATION OF PH |
I.S. EN 12703:2016
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
I.S. EN 15274:2015
|
GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
I.S. EN 1902:2015
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
I.S. EN 14713:2016
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
I.S. EN 12705:2011
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
I.S. EN 542:2003
|
ADHESIVES - DETERMINATION OF DENSITY |
I.S. EN 15416-5:2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF CONVENTIONAL PRESSING TIME |
I.S. EN 15275:2015
|
STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
I.S. EN 1243:2011
|
ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
DIN EN 15416-1:2017-05
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
DIN EN 15416-4:2017-05
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
DIN EN 15416-5:2017-05
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
15/30317330 DC : 0
|
BS EN 204 - CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
BS EN 16254 : 2013
|
ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
BS EN 15416-1:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
ISO 19210:2017
|
Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints |
PREN 12703 : DRAFT 2015
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
14/30300568 DC : 0
|
BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
03/306131 DC : DRAFT APR 2003
|
EN 1067 - ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
05/30142457 DC : 0
|
BS EN 15416-1 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: STATIC LOAD TEST OF SINGLE BONDLINE SPECIMENS IN COMPRESSION SHEAR |
14/30296753 DC : 0
|
BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
04/30123559 DC : DRAFT OCT 2004
|
EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS |
03/306130 DC : DRAFT APR 2003
|
EN 827 - ADHESIVES - DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT |
16/30315352 DC : 0
|
BS ISO 19210 - ADHESIVES - THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
15/30326222 DC : 0
|
BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
DIN EN 302-5:2013-06
|
Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
07/30160818 DC : 0
|
BS EN 302-5 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF THE CONVENTIONAL ASSEMBLY TIME |
10/30231811 DC : DRAFT SEP 2010
|
BS EN 1245 - ADHESIVES - DETERMINATION OF PH |
10/30231808 DC : 0
|
BS EN 1243 - ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
DD ENV 13999-1:2001
|
Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
BS ISO 16525-2:2014
|
Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies |
04/30087608 DC : DRAFT OCT 2004
|
BS 6100-7 - BUILDING AND CIVIL ENGINEERING - VOCABULARY - PART 7: CONSTRUCTION PARTS |
13/30281051 DC : 0
|
BS EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
PREN 12704 : DRAFT 2015
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
14/30293503 DC : 0
|
BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
PD CEN ISO/TR 16178:2012
|
Footwear. Critical substances potentially present in footwear and footwear components |
14/30300565 DC : 0
|
BS EN 15275 - STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
03/314567 DC : DRAFT OCT 2003
|
BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
S.R. CEN ISO/TR 16178:2012
|
FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS (ISO/TR 16178:2012) |
I.S. EN 16254:2013
|
ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
I.S. EN 302-8:2017
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
I.S. EN 302-5:2013
|
ADHESIVES FOR LOAD-BEARING STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF MAXIMUM ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
S.R. CEN/TS 14999:2013
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST IN STORAGE CONTAINER |
UNE-EN 15416-1:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
PREN 1240 : DRAFT 2010
|
ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
DIN EN 15425 E : 2008
|
ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
I.S. EN 15425:2017
|
ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
DIN EN 14257 E : 2006
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
NF EN 13415 : 2010
|
TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
DIN EN 1372:2015-06
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
DIN EN 1238:2011-07
|
Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
DIN EN 1373:2015-06
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
DIN EN 1966:2009-07
|
STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
DIN EN 12703:2016-10
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
DIN EN 15062 E : 2006
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
DIN EN 14869-2 E : 2011
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
DIN EN ISO 9311-2:2011-12
|
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
DIN EN 14680 E : 2015
|
ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
DIN EN ISO 14678:2005-11
|
Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
DIN EN 302-6:2013-06
|
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
DIN EN 14869-1:2011-07
|
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
DIN EN 14680:2015-12
|
ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
BS EN 14869-1:2011
|
Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders |
BS EN 1392:2006
|
Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
UNE-EN 1242:2013
|
Adhesives - Determination of isocyanate content |
BS EN 542:2003
|
Adhesives. Determination of density |
UNE-EN 12703:2017
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
BS EN 302-1:2013
|
Adhesives for load-bearing timber structures. Test methods Determination of longitudinal tensile shear strength |
BS EN 1965-1:2011
|
Structural adhesives. Corrosion Determination and classification of corrosion to a copper substrate |
UNE-EN 13415:2010
|
Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
DIN EN 15274 E : 2015
|
GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
DIN EN 15275 E : 2015
|
STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
BS EN 13999-2:2013
|
Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Determination of volatile organic compounds |
UNE-EN ISO 9311-2:2011
|
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
BS EN 12964:2001
|
Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
BS EN 14680:2015
|
Adhesives for non-pressure thermoplastics piping systems. Specifications |
DIN EN 15416-3:2010-06
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
I.S. EN 1841:1999
|
ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
EN 1719:1998
|
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack |
EN 14022:2010
|
Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
EN 14493 : 2002
|
STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
UNI EN ISO 9311-2 : 2011
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
UNI EN 12705 : 2011
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
UNI EN 14869-2 : 2011
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
UNI EN 13999-4 : 2009
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
UNI EN 14869-1 : 2011
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
UNI EN 13999-1 : 2014
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
UNI EN 302-6 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
UNI EN 302-7 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
UNI EN 1240 : 2011
|
ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
UNI EN 1245 : 2011
|
ADHESIVES - DETERMINATION OF PH |
UNI EN 12962 : 2011
|
ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
UNI EN 13999-3 : 2009
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
UNI EN 1965-1 : 2011
|
STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
UNI EN 13999-2 : 2014
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
UNI EN 14256 : 2008
|
ADHESIVES FOR NON-STRUCTURAL WOOD APPLICATIONS - TEST METHOD AND REQUIREMENTS FOR RESISTANCE TO STATIC LOAD |
UNI EN 13415 : 2010
|
TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
EN 13999-1:2013
|
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
UNI EN 1238 : 2011
|
ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
UNI EN 1242 : 2013
|
ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
UNI EN 1243 : 2011
|
ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
UNI EN 1965-2 : 2011
|
STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
UNI EN 1239 : 2011
|
ADHESIVES - FREEZE-THAW STABILITY |
UNI EN 1966 : 2009
|
STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
UNI EN 14294 : 2010
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
UNI EN 302-1 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
UNI EN 1464 : 2010
|
ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
UNI EN 14022 : 2010
|
STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES |
12/30259194 DC : 0
|
BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
S.R. CEN/TR 16953:2017
|
MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION |
ISO 16245:2009
|
Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
DIN EN 15416-5 E : 2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
DIN EN 15416-1 E : 2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
13/30259197 DC : 0
|
BS EN 16556 - ADHESIVES - DETERMINATION OF THE OPEN ASSEMBLY TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
I.S. EN 15062:2006
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
I.S. EN 14022:2010
|
STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES |
BS EN 302-8:2017
|
Adhesives for load-bearing timber structures. Test methods Static load test of multiple bond line specimens in compression shear |
16/30315349 DC : 0
|
BS ISO 19209 - CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
05/30142460 DC : 0
|
BS EN 15416-2 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: STATIC LOAD TEST OF MULTIPLE BONDLINE SPECIMENS IN COMPRESSION SHEAR |
PREN 14869-2 : DRAFT 2010
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
14/30296750 DC : 0
|
BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
PREN 13999-1 : DRAFT 2012
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
UNI ISO 16245 : 2011
|
INFORMATION AND DOCUMENTATION - BOXES, FILE COVERS AND OTHER ENCLOSURES, MADE FROM CELLULOSIC MATERIALS, FOR STORAGE OF PAPER AND PARCHMENT DOCUMENTS |
05/30135775 DC : DRAFT JUL 2005
|
EN 15275 - STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
BS ISO 19209:2017
|
Adhesives. Classification of thermoplastic wood adhesives for non-structural applications |
10/30231805 DC : 0
|
BS EN 1240 - ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
08/30193485 DC : 0
|
BS ISO 17212 - STRUCTURAL ADHESIVES- GUIDELINES FOR THE SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING |
PD CEN/TS 14999:2013
|
Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container |
UNE-EN 302-5:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
15/30296771 DC : 0
|
BS EN 15416-1 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASSHOUSE TEST) |
07/30167352 DC : DRAFT AUG 2007
|
BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
10/30231835 DC : DRAFT SEP 2010
|
BS EN 1965-2 - STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
BS EN 302-5:2013
|
Adhesives for load-bearing structures. Test methods Determination of maximum assembly time under referenced conditions |
UNE-EN 302-8:2017
|
Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
15/30296777 DC : 0
|
BS EN 15416-4 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
PREN 15274 : DRAFT 2014
|
GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
10/30231814 DC : DRAFT SEP 2010
|
BS EN 12962 - ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
03/105232 DC : DRAFT MAR 2003
|
BS EN ISO 19952 - FOOTWEAR - VOCABULARY |
11/30240279 DC : DRAFT MAR 2011
|
BS EN 16254 - ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
12/30259436 DC : DRAFT JULY 2012
|
BS EN 13999-2 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
11/30245847 DC : 0
|
BS EN 302-6 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
05/30131552 DC : DRAFT APR 2005
|
EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
10/30231823 DC : DRAFT SEP 2010
|
BS EN 1239 - ADHESIVES - FREEZE-THAW STABILITY |
15/30296762 DC : 0
|
BS EN 15416-5 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
I.S. EN 16556:2014
|
DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NONSTRUCTURAL APPLICATIONS |
PREN 301 : DRAFT 2015
|
ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
DIN EN 15416-1:2015-06 (Draft)
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
I.S. CEN TR 14548:2003
|
ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES |
ISO 17178:2013
|
Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements |
PREN 15307 : DRAFT 2014
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
PREN 15425 : DRAFT 2015
|
ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
PREN 1903 : DRAFT 2014
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
BS EN 50050:2006
|
Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment |
DIN EN 15416-3:2015-06 (Draft)
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
PREN 12705 : DRAFT 2010
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
EN 15416-3:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
I.S. EN 15416-3:2017+A1:2019
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
DIN EN 13999-4:2009-08
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
DIN EN 1067:2006-03
|
Adhesives - Examination and preparation of samples for testing |
DIN EN 14814 E : 2016
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
DIN EN 302-7:2013-06
|
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
DIN EN 14022:2010-06
|
STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTICOMPONENT ADHESIVES |
CEN ISO/TR 16178:2012
|
FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS (ISO/TR 16178:2012) |
DIN EN 14713 E : 2016
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
DIN EN ISO 9311-1:2005-11
|
Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005) |
DIN EN 1965-2:2011-07
|
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
DIN EN 1965-1:2011-07
|
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
DIN EN 14510 E : 2005
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - DETERMINATION OF SOLE POSITIONING TACK (SPOTTING TACK) |
BS EN 14293:2006
|
Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
UNE-EN 12704:2017
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
BS EN 1841:1999
|
Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
BS EN 13999-4 : 2007
|
ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
BS EN 12960:2001
|
Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance |
ISO 9311-1:2005
|
Adhesives for thermoplastic piping systems — Part 1: Determination of film properties |
UNE-EN 1903:2015
|
Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
BS EN 1241:1998
|
Adhesives. Determination of acid value |
BS EN 1464:2010
|
Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method |
ISO 19952:2005
|
Footwear Vocabulary |
BS EN ISO 15908:2002
|
Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives |
BS EN 1391:1998
|
Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
BS EN 1239:1998
|
Adhesives. Freeze-thaw stability |
BS EN 15275:2015
|
Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
BS EN 15062:2006
|
Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
BS EN 1242:2013
|
Adhesives. Determination of isocyanate content |
DIN EN 15190 E : 2007
|
STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
BS EN 1903:2015
|
Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
DIN EN 15307:2015-04
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
BS EN 1373:2015
|
Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
ISO 9311-3:2005
|
Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure |
BS EN 12961:2001
|
Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
BS EN 1896:2001
|
Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation |
UNE-EN 14294:2010
|
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
BS EN 14493:2002
|
Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method |
BS EN 12436:2002
|
Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements |
BS EN 12704:2012
|
Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives |
UNE-EN 15274:2015
|
General purpose adhesives for structural assembly - Requirements and test methods |
BS EN 12963:2001
|
Adhesives. Determination of free monomer content in adhesives based on synthetic polymers |
BS EN 12702:2000
|
Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers |
UNE-EN 15275:2015
|
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
BS EN 12705:2011
|
Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration |
I.S. EN 1372:2015
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
UNE-EN 15307:2015
|
Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
UNE-EN 302-1:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
ISO 14678:2005
|
Adhesives Determination of resistance to flow (sagging) |
BS EN 522:1998
|
Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
BS EN 1721:1999
|
Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of rolling ball tack |
UNE-EN 1902:2015
|
Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
BS EN 302-7:2013
|
Adhesives for load-bearing timber structures. Test methods Determination of the working life under referenced conditions |
ISO/TR 16178:2012
|
Footwear Critical substances potentially present in footwear and footwear components |
UNE-EN 13999-2:2014
|
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
BS EN 1240:1998
|
Adhesives. Determination of hydroxyl value and/or hydroxyl content |
I.S. EN 13415:2010
|
TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
ISO 9311-2:2011
|
Adhesives for thermoplastic piping systems Part 2: Determination of shear strength |
BS EN ISO 19952:2006
|
Footwear. Vocabulary |
BS EN 14256:2007
|
Adhesives for non-structural wood applications. Test method and requirements for resistance to static load |
BS EN 1372:2015
|
Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
UNE-EN 204:2016
|
Classification of thermoplastic wood adhesives for non-structural applications |
BS EN 15416-3:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
BS EN 1243:1999
|
Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates |
BS EN 14510:2005
|
Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
BS EN 1966:2009
|
Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
UNE-EN 14713:2017
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
UNE-EN 302-7:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
UNE-EN 828:2013
|
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
BS EN 1245:1999
|
Adhesives. Determination of pH. Test method |
BS EN 924:2003
|
Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint |
I.S. EN 1373:2015
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
BS EN 12701:2001
|
Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials |
BS EN 14173:2002
|
Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies |
I.S. EN 1903:2015
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
BS EN 302-6:2013
|
Adhesives for load-bearing timber structures. Test methods Determination of the minimum pressing time under referenced conditions |
UNE-EN 15416-5:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
BS EN 14292:2005
|
Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature |
UNE-EN 12765:2016
|
Classification of thermosetting wood adhesives for non-structural applications |
UNE-EN 302-6:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
DIN EN 15275:2015-06
|
STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
DIN EN 15307 E : 2015
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
BS EN 12962:2001
|
Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index) |
EN 14713:2016
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
EN 13999-3:2007+A1:2009
|
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes |
EN 522 : 1998
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - BOND STRENGTH - MINIMUM REQUIREMENTS AND ADHESIVE CLASSIFICATION |
EN 542:2003
|
Adhesives - Determination of density |
EN 15190:2007
|
Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
EN 14869-1:2011
|
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
EN 14510:2005
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
EN 14292:2005
|
Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature |
EN 15416-1:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
EN 12092:2001
|
Adhesives - Determination of viscosity |
EN 1965-1:2011
|
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
EN 14294:2010
|
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
EN 1896:2001
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation |
EN 1464:2010
|
Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
EN 14814:2016
|
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
EN ISO 14678:2005
|
Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
EN 14869-2:2011
|
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
EN 1965-2:2011
|
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
EN 16254:2013+A1:2016
|
Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
EN 1391 : 1998
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - A METHOD FOR EVALUATING THE BONDABILITY OF MATERIALS - MINIMUM REQUIREMENTS AND MATERIAL CLASSIFICATION |
EN 543:2003
|
Adhesives - Determination of apparent density of powder and granule adhesives |
EN ISO 19952 : 2005
|
Footwear - Vocabulary (ISO 19952:2005) |
EN 15062:2006
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
EN 15416-5:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
EN 302-8:2017
|
Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
EN 1841:1998
|
Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
EN 14256:2007
|
Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
EN ISO 9311-3:2005
|
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005) |
EN 15274:2015
|
General purpose adhesives for structural assembly - Requirements and test methods |
EN ISO 9311-2:2011
|
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
EN 1372:2015
|
Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
EN 14173 : 2002
|
STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
EN 1903:2015
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
EN 1967:2002/AC:2005
|
STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
EN ISO 9311-1:2005
|
Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005) |
EN 827:2005
|
Adhesives - Determination of conventional solids content and constant mass solids content |
EN 16556:2014
|
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
EN 1392:2006
|
Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
EN 1721:1998
|
Adhesives for paper and board, packaging and disposable sanitary products - Track measurement for pressure sensitive adhesives - Determination of rolling ball track |
EN 1895:2001/AC:2007
|
Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" peel test for a flexible-to-flexible assembly |
EN 924:2003
|
Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint |
EN 14258:2004
|
Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
EN 14680:2015
|
Adhesives for non-pressure thermoplastics piping systems - Specifications |
EN 15425:2017
|
Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
EN 1373:2015
|
Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
DIN EN 302-8:2017-05
|
Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
EN 1902:2015
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
EN 302-5:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
EN 204:2016
|
Classification of thermoplastic wood adhesives for non-structural applications |
EN 205:2016
|
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
EN 302-6:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
EN 828:2013
|
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
EN 15307:2014
|
Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
EN 13999-4:2007+A1:2009
|
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates |
EN 13887:2003
|
Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
EN 302-1:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
EN 13999-2:2013
|
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
EN 15275:2015
|
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
EN 1720:1998
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability |
EN 1966:2009
|
Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
EN 14293 : 2006
|
ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
EN ISO 15908:2002
|
Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives (ISO 15908:2002) |
EN 12964:2001
|
Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature |
EN 14257:2006
|
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
EN 15416-4:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
PREN 14680 : DRAFT 2013
|
ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
PREN 828 : DRAFT 2010
|
ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
10/30231820 DC : 0
|
BS EN 1238 - ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
I.S. EN 14493:2002
|
STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
PREN 1902 : DRAFT 2014
|
ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
DD ENV 302-5:2002
|
Adhesives for load-bearing timber structures. Test tethods Determination of the conventional assembly time |
BS ISO 17178:2013
|
Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
05/30136487 DC : DRAFT JUL 2005
|
EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
PREN 12765 : DRAFT 2015
|
CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
15/30296774 DC : 0
|
BS EN 302-8 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
10/30231829 DC : 0
|
BS EN 828 - ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
DIN EN 302-8 E : 2017
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
UNI EN 12960 : 2012
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF SHEAR RESISTANCE |
UNE-CEN/TS 14999:2016 EX
|
Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container |
15/30317336 DC : 0
|
BS EN 12765 - CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
DIN EN 15416-4 E : 2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
06/30145736 DC : 0
|
EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENTS LOADED IN BENDING SHEAR |
PD CR 14376:2002
|
Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process |
PREN 204 : DRAFT 2015
|
CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
PREN 1243 : DRAFT 2010
|
ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
ONORM EN 14257 : 2006
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
NFL 17 021 : 98 PR
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES - CHARACTERISATION BY LIQUID CHROMATOGRAPHY |
DIN EN 302-8:2015-06 (Draft)
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
EN 301:2017
|
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
BS EN 14257:2006
|
Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT \'91) |
PREN 205 : DRAFT 2015
|
ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
ISO 16525-2:2014
|
Adhesives Test methods for isotropic electrically conductive adhesives Part 2: Determination of electrical characteristics for use in electronic assemblies |
I.S. CEN TS 14999:2006
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST OF ADHESIVES |
I.S. EN 14257:2006
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
ISO 16525-1:2014
|
Adhesives Test methods for isotropic electrically conductive adhesives Part 1: General test methods |
EN 302-7:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
DIN EN 14294 E : 2010
|
ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
DIN EN 14292 E : 2005
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF STATIC LOAD RESISTANCE WITH INCREASING TEMPERATURE |
DIN EN 14869-1 E : 2011
|
STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
BS EN 204:2001
|
Classification of thermoplastic wood adhesives for non-structural applications |
UNE-EN 15416-4:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
BS EN 13415:2002
|
Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
BS EN 14294:2004
|
Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes |
BS EN 15274:2015
|
General purpose adhesives for structural assembly. Requirements and test methods |
BS EN 15416-4:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of open assembly time under referenced conditions |
BS EN 13887:2003
|
Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
BS EN 14022:2003
|
Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives |
ISO 15908:2002
|
Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives |
BS EN 12765:2001
|
Classification of thermosetting wood adhesives for non-structural applications |
BS EN 15190:2007
|
Structural adhesives. Test methods for assessing long term durability of bonded metallic structures |
BS EN 12092:2001
|
Adhesives. Determination of viscosity |
BS EN ISO 9311-2:2011
|
Adhesives for thermoplastic piping systems Determination of shear strength |
BS EN 205:2003
|
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
BS EN 1719:1999
|
Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure-sensitive adhesives. Determination of loop tack |
BS EN ISO 9311-3:2005
|
Adhesives for thermoplastic piping systems Test method for the determination of resistance to internal pressure |
BS EN 13999-1:2013
|
Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
DIN EN 14292:2005-09
|
Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature; German version EN 14292:2005 |
CEN/TR 14548:2003
|
Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
CEN/TS 14472-1:2003
|
Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
DIN EN 827:2006-03
|
Adhesives - Determination of conventional solids content and constant mass solids content |
DIN EN 14257:2006-09
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
DIN EN 14510:2005-08
|
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
EN 12765:2016
|
Classification of thermosetting wood adhesives for non-structural applications |
EN 12701:2001
|
Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials |
EN 12703:2016
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
EN 1240:2011
|
Adhesives - Determination of hydroxyl value and/or hydroxyl content |
EN 12702:2000
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers |
DIN EN 14869-2:2011-07
|
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
EN 1244:1998
|
Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
DIN EN 14814:2016-09
|
ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
DIN EN 14256:2007-10
|
Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
DIN EN 15190:2007-10
|
Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
DIN EN 14493:2003-02
|
STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
DIN EN 15425:2008-06
|
ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
DIN EN 543:2003-08
|
ADHESIVES - DETERMINATION OF APPARENT DENSITY OF POWDER AND GRANULE ADHESIVES |
DIN EN 13887:2003-11
|
STRUCTURAL ADHESIVES - GUIDELINES FOR SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING |
EN 1067:2005
|
Adhesives - Examination and preparation of samples for testing |
DIN EN 14259:2004-07
|
Adhesives for floor coverings - Requirements for mechanical and electrical performance |
DIN EN 542:2003-08
|
ADHESIVES - DETERMINATION OF DENSITY |
UNE-EN 16254:2014
|
Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |