Skip to content
Please enter a keyword to search

  • EN 932-5:2012/AC:2014

    Current The latest, up-to-date edition.

    TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION

    Available format(s): 

    Language(s): 

    Published date:  28-05-2014

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Common equipment
    5 Calibration and checking
    6 Reagents
    Annex A (normative) - Method for the
            performance check of sieves
    Annex B (normative) - Procedure for the
            manual checking of perforated
            plate test sieve openings
    Annex C (informative) - Balance recommendation
            for various standard test methods
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes general requirements for common equipment, calibration and checking procedures and reagents for the testing of the properties of aggregates.

    General Product Information - (Show below) - (Hide below)

    Committee TC 154
    Development Note Supersedes PREN 932-5. (03/2012)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN 1367-8 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
    02/101929 DC : DRAFT FEB 2002 PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION
    BS EN 1097-11:2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates
    BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates
    07/30165780 DC : DRAFT AUG 2007 BS EN 1097-5 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
    07/30166977 DC : DRAFT AUG 2007 BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
    PREN 13286-54 : DRAFT 2011 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
    BS EN 933-11:2009 Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate
    10/30218648 DC : DRAFT JUNE 2010 BS EN 1744-7 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA AGGREGATE)
    08/30185875 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
    DIN EN 1744-7:2012-05 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
    11/30241878 DC : 0 BS EN 933-6 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
    I.S. EN 16236:2013 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
    06/30153220 DC : 0 BS EN 1367-6 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6 - RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT
    BS EN 1744-7:2012 Tests for chemical properties of aggregates Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
    UNE-EN 1367-8:2015 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
    I.S. EN 1744-7:2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH AGGREGATE (MIBA AGGREGATE)
    08/30188887 DC : 0 BS EN 933-9 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
    I.S. EN 1367-6:2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
    I.S. EN 1744-8:2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
    UNI EN 1744-7 : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH - AGGREGATE (MIBA AGGREGATE)
    PREN 13383-2 : DRAFT 2017 ARMOURSTONE - PART 2: TEST METHODS
    DIN EN 16236:2015-07 (Draft) EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
    EN 13383-1:2002/AC:2004 ARMOURSTONE - PART 1: SPECIFICATION
    DIN EN 1367-2:2010-02 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
    DIN EN 933-8:2015-07 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
    BS EN 1097-4:2008 Tests for mechanical and physical properties of aggregates Determination of the voids of dry compacted filler
    BS EN 1097-9:2014 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test
    BS EN 1097-8:2009 Tests for mechanical and physical properties of aggregates Determination of the polished stone value
    BS EN 12697-38:2004 Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration
    UNE-EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
    BS EN 1744-6:2006 Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement
    BS EN 13450:2013 Aggregates for railway ballast
    BS EN 1097-1:2011 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval)
    BS EN 13242:2013 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
    BS EN 1367-3:2001 Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt
    BS EN 932-1:1997 Tests for general properties of aggregates Methods for sampling
    BS EN 13043:2013 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
    I.S. EN 1097-1:2011 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL)
    EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
    I.S. EN 1367-2:2009 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST
    EN 1097-10:2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
    I.S. EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
    EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
    EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
    EN 1097-4:2008 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
    EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
    EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
    EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
    EN 13450:2002/AC:2004 AGGREGATES FOR RAILWAY BALLAST
    EN 12620:2002+A1:2008 Aggregates for concrete
    EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
    CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
    EN 13055-2:2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
    EN 13383-2:2013 Armourstone - Part 2: Test methods
    EN 13139:2002/AC:2004 AGGREGATES FOR MORTAR
    EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
    EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
    UNI EN 16236 : 2013 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
    04/30077125 DC : 0 EN 933-11 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATES
    I.S. EN 13055-2:2004 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
    PREN 16236 : DRAFT 2015 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
    UNI EN 933-11 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
    11/30246470 DC : 0 BS EN 13286-54 - UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
    DIN EN 1367-7:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
    04/30088151 DC : DRAFT FEB 2004 EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
    00/105661 DC : DRAFT AUG 2000 BS EN 1744-4 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
    16/30320756 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
    12/30256925 DC : 0 BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
    09/30195711 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
    PD CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures Test method for the determination of frost susceptibility. Resistance to freezing and thawing of hydraulically bound mixtures
    09/30195708 DC : 0 BS EN 13383-1 - ARMOURSTONE - PART 1: SPECIFICATION
    DIN 4226-2:2002-02 AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES
    I.S. EN 13055:2016 LIGHTWEIGHT AGGREGATES
    UNI EN 1367-7 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
    I.S. EN 1097-11:2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
    UNI CEN/TS 13286-54 : 2014 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
    NF EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
    DIN EN 1367-1:2007-06 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
    DIN EN 933-6:2014-07 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
    DIN EN 933-9:2013-07 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (includes Amendment A1:2013)
    DIN EN 1367-4:2008-06 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
    DIN EN 1367-5:2011-04 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
    DIN EN 12697-38:2004-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
    BS EN 933-9 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
    UNE-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
    BS EN 13055-2:2004 Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
    BS EN 13286-1:2003 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
    BS EN 933-3:2012 Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index
    BS EN 933-1:2012 Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method
    I.S. EN 933-10:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
    I.S. EN 933-6:2014 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
    I.S. EN 1367-1:2007 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING
    I.S. EN 1097-5:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
    I.S. EN 13179-1:2013 TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST
    I.S. EN 13450:2013 AGGREGATES FOR RAILWAY BALLAST
    I.S. EN 1097-7:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
    I.S. EN 933-3:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX
    I.S. EN 933-1:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
    I.S. EN 1097-6:2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
    I.S. EN 933-8:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
    I.S. EN 933-9:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
    I.S. EN 1097-4:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
    I.S. EN 933-4:2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
    I.S. EN 1367-4:2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
    I.S. EN 1097-9:2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
    I.S. EN 1367-5:2011 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK
    DIN EN 933-6:2002-02 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
    I.S. EN 1744-1:2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
    ONORM EN 1097-7 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
    UNE-EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
    DIN EN 1367-8:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
    DIN EN 1097-11 E : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
    BS EN 13055:2016 Lightweight aggregates
    DIN EN 1097-11:2013-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
    DIN EN 1744-8:2012-11 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
    08/30185872 DC : 0 BS EN 933-10 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
    I.S. EN 13055-1:2002 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
    07/30166974 DC : DRAFT AUG 2007 BS EN 1367-2 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULPHATE TEST
    UNI EN 1097-11 : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
    UNI EN 1367-8 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
    06/30153237 DC : DRAFT JULY 2006 BS ISO 16003 - COMPONENTS FOR GASEOUS MEDIA AND FIRE EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS, SELECTOR VALVES AND THEIR ACTUATORS, NOZZLES, FLEXIBLE CONNECTORS, AND CHECK VALVES AND NON-RETURN VALVES
    10/30218642 DC : DRAFT JUNE 2010 BS EN 1097-6 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
    PREN 933-9 : DRAFT 2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
    BS EN 1367-6:2008 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl)
    PREN 933-10 : DRAFT 2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
    DIN EN 1744-4:2005-10 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
    DIN EN 1744-1:2013-03 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
    DIN EN 1744-5:2006-12 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
    DIN EN 933-3:2012-04 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
    DIN EN 933-1:2012-03 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
    DIN EN 1744-6:2006-12 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
    DIN EN 1097-10:2014-09 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
    DIN EN 1097-4:2008-06 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
    DIN EN 1097-1:2011-04 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
    DIN EN 1097-8:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
    DIN EN 933-10:2009-10 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
    DIN EN 1097-5:2008-06 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
    DIN EN 1097-6:2013-09 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
    EN 1097-8:2009 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
    BS EN 1097-5:2008 Tests for mechanical and physical properties of aggregates Determination of the water content by drying in a ventilated oven
    BS EN 13383-2:2013 Armourstone Test methods
    BS EN 933-6:2014 Tests for geometrical properties of aggregates Assessment of surface characteristics. Flow coefficient of aggregates
    UNI EN 1097-7 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
    UNI EN 1744-1 : 2013 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
    UNI EN 933-3 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX
    UNI EN 1367-2 : 2010 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST
    UNI EN 1367-1 : 2007 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING
    UNI EN 933-6 : 2014 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
    UNI EN 13139 : 2013 AGGREGATES FOR MORTAR
    UNI EN 13242 : 2013 AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION
    UNI EN 1367-4 : 2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
    UNI EN 13179-1 : 2013 TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST
    UNI EN 1097-5 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
    UNI EN 933-1 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
    UNI EN 933-4 : 2008 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
    UNI EN 13383-1 : 2013 ARMOURSTONE - PART 1: SPECIFICATION
    UNI EN 1097-10 : 2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
    UNI EN 1744-6 : 2007 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
    UNI EN 1367-5 : 2011 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK
    I.S. EN 13043:2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
    UNI EN 13043 : 2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
    UNI EN 1097-1 : 2011 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL)
    UNI EN 1097-9 : 2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
    UNI EN 933-10 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
    UNI EN 1097-4 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
    UNI EN 13383-2 : 2013 ARMOURSTONE - PART 2: TEST METHODS
    UNI EN 12620 : 2013 AGGREGATES FOR CONCRETE
    UNI EN 13450 : 2013 AGGREGATES FOR RAILWAY BALLAST
    UNE-EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
    BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates
    I.S. EN 933-11:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
    07/30165777 DC : DRAFT AUG 2007 BS EN 1097-4 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
    DIN EN 1367-7 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
    11/30231793 DC : 0 BS EN 16262 - SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES
    07/30165783 DC : DRAFT AUG 2007 BS EN 1097-7 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
    S.R. CEN/TS 13286-54:2014 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
    14/30303776 DC : 0 BS EN 13285 - UNBOUND MIXTURES - SPECIFICATIONS
    BS EN 1744-8:2012 Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
    07/30165774 DC : DRAFT AUG 2007 BS EN 933-4 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
    DIN EN 933-11:2011-05 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (includes Corrigendum AC:2009)
    PREN 933-6 : DRAFT 2011 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
    15/30311106 DC : 0 BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
    EN 16236:2013 Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control
    18/30368675 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    DIN EN 933-4:2015-01 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
    DIN EN 1097-2:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    DIN EN 1097-7:2008-06 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
    DIN EN 1097-3:1998-06 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS
    DIN EN 1097-9:2014-03 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
    I.S. EN 1097-2:2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    BS EN 1744-1 : 2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
    BS EN 1097-7:2008 Tests for mechanical and physical properties of aggregates Determination of the particle density of filler. Pyknometer method
    BS EN 933-4:2008 Tests for geometrical properties of aggregates Determination of particle shape. Shape index
    BS EN 12620:2013 Aggregates for concrete
    UNE-EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
    BS EN 13383-1:2013 Armourstone Specification
    UNI EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
    BS EN 933-10:2009 Tests for geometrical properties of aggregates Assessment of fines. Grading of filler aggregates (air jet sieving)
    UNI EN 1097-2 : 2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    BS EN 13139:2013 Aggregates for mortar
    UNE-EN 1744-1:2010 Tests for chemical properties of aggregates - Part 1: Chemical analysis
    BS EN 13055-1:2002 Lightweight aggregates Lightweight aggregates for concrete, mortar and grout
    BS EN 1367-2:2009 Tests for thermal and weathering properties of aggregates Magnesium sulfate test
    BS EN 1367-1:2007 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing
    UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
    BS EN 1367-5:2011 Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock
    BS EN 1744-4:2005 Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures
    BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation
    BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption
    UNE-EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
    BS EN 933-8 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
    BS EN 13179-2:2000 Test for filler aggregate used in bituminous mixtures Bitumen number
    I.S. EN 1097-8:2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
    UNE-EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
    BS EN 1367-4:2008 Tests for thermal and weathering properties of aggregates Determination of drying shrinkage
    EN 1367-6:2008 Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
    EN 1367-5:2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
    UNI EN 933-9 : 2013 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
    EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates - Part 1: Chemical analysis
    EN 1367-7:2014 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
    EN 933-11:2009/AC:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
    UNI EN 1097-6 : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
    EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
    EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
    EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
    ONORM EN 1744-4 : 2005 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
    EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
    EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
    EN 1367-2:2009 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
    EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
    EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
    EN 1744-5:2006 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
    EN 933-4:2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
    EN 932-1:1996 Tests for general properties of aggregates - Part 1: Methods for sampling
    EN 933-6:2014 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
    EN 1744-3:2002 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates
    EN 1367-3:2001/AC:2004 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT"
    EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
    EN 933-10:2009 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
    EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
    EN 1744-8:2012 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
    DIN EN 1744-8 E : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
    04/30088146 DC : DRAFT FEB 2004 EN 1744-5 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS
    DIN EN 1367-6:2008-12 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
    DIN 4226-1:2001-07 AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES
    17/30345777 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
    16/30320762 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    UNE-EN 1744-8:2013 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
    I.S. EN 1367-8:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
    PREN 1744-5 : DRAFT 2004 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS
    UNI EN 1367-6 : 2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
    UNE-EN 1367-7:2015 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
    PREN 1097-8 : DRAFT 2016 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
    UNI EN 1744-8 : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
    I.S. EN 1367-7:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
    BS EN 16236:2013 Evaluation of conformity of aggregates. Initial Type Testing and Factory Production Control
    BS EN 1744-3:2002 Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates
    EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
    BS EN 1097-10:2014 Tests for mechanical and physical properties of aggregates Determination of water suction height
    UNE-EN 1367-5:2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
    UNE-EN 1097-10:2015 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
    BS EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures Delta ring and ball test
    BS EN 1744-5:2006 Tests for chemical properties of aggregates Determination of acid soluble chloride salts
    EN 13055 : 2016 LIGHTWEIGHT AGGREGATES
    EN 13179-2:2000 Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number
    I.S. EN 1744-4:2005 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
    DIN EN 13055-2:2004-09 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
    DIN EN 13055-1:2002-08 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
    EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
    EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
    DIN EN 1097-10:2003-03 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
    EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
    I.S. EN 1097-10:2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
    EN 1744-4:2005 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
    UNE-EN 933-9:2010 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO 386:1977 Liquid-in-glass laboratory thermometers Principles of design, construction and use
    ISO 3310-1:2016 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
    EN ISO 3650:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS
    ISO 3310-2:2013 Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
    EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
    ISO 4788:2005 Laboratory glassware Graduated measuring cylinders
    ISO 3650:1998 Geometrical Product Specifications (GPS) Length standards Gauge blocks
    EN 933-2:1995 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures
    ISO 384:2015 Laboratory glass and plastics ware Principles of design and construction of volumetric instruments
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
    ISO 6353-3:1987 Reagents for chemical analysis — Part 3: Specifications — Second series
    EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
    OIML R 76-1 : 2006 NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
    ISO 649-1:1981 Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective