EN ISO 15611:2003

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)

Available format(s):

Withdrawn date: 30-06-2004

Language(s):

Published date: 15-12-2003

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preliminary welding procedure specifications (pWPS)
5 Qualification of the welding procedure
6 Existing previous welding experience
7 Range of qualification
8 Validity
9 Welding Procedure Qualification Record (WPQR)
Bibliography

Abstract - (Show below) - (Hide below)

ISO 15611:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on previous welding experience.In addition it gives the range of qualification and the validity.The use of ISO 15611:2003 may be restricted by an application standard or a specification.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 121
Development Note	Supersedes EN 288-6 (12/2003)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Withdrawn
Supersedes	EN 288-6 : 1994

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN ISO 15611:2004-03	Identical
ISO 15611:2003	Identical
UNI EN ISO 15611 : 2005	Identical
UNE-EN ISO 15611:2004	Identical
SN EN ISO 15611 : 2004	Identical
NF EN ISO 15611 : 2004	Identical
NEN EN ISO 15611 : 2003	Identical
I.S. EN ISO 15611:2004	Identical
NS EN ISO 15611 : 1ED 2004	Identical
NBN EN ISO 15611 : 2004	Identical
PN EN ISO 15611 : 2006	Identical
BS EN ISO 15611:2003	Identical
SS-EN ISO 15611 : 2004	Identical
DS EN ISO 15611 : 2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

09/30211880 DC : 0	BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
11/30253745 DC : 0	BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
11/30246678 DC : 0	BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
16/30334287 DC : 0	BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
17/30360051 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 334:2016-05 (Draft)	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN ISO 15607:2004	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
I.S. EN 14382:2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 13445-4:2014	UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
DIN EN 15085-2:2008-01	RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER
DIN EN 12732:2014-07	Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014)
DIN EN 14382 E : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14382 : 2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 14276-1:2006	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 1090-2:2011-10	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 13480-4:2017	Metallic industrial piping - Part 4: Fabrication and installation
UNI EN 12732 : 2014	GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 15085-4:2007	RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
15/30320416 DC : 0	BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 13611:2015	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
10/30219381 DC : 0	BS EN 13084-7 - FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
PREN 12732 : DRAFT 2009	GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
PREN 13480-4 : DRAFT 2011	METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
PREN 1090-2 : DRAFT 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN 1090-2:2011	Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ONORM EN 334 : JUN 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 1090-2 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft)	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 13445-4 : 2014 COR 2017	UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
DIN EN 15085-4:2008-01	Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
BS EN 334 : 2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 1775:2007-10	Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
DIN EN 13611:2019-06	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 13084-1:2007-05	Free-standing chimneys - Part 1: General requirements
I.S. EN 13480-4:2017	METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
I.S. EN 12732:2013	GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 13084-1:2007	FREE-STANDING CHIMNEYS - PART 1: GENERAL REQUIREMENTS
I.S. EN 14394:2006	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
NF EN 14276-1 : 2006 + A1 2011	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN 1775:2007	GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
DIN EN 12732:2000-09	GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
BIS IS 16003 : 2012	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
13/30247837 DC : 0	BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
EN 1090-2:2008+A1:2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 14276-1:2011-05	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 14394 E : 2008	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14394:2008-12	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14382:2016-05 (Draft)	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 15085-2:2007	Railway applications. Welding of railway vehicles and components Quality requirements and certification of welding manufacturer
EN 14276-1:2020	Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
I.S. EN 15085-2:2007	RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER
UNI EN 14276-1 : 2011	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 13094:2015	Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
EN 15085-2:2007	Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer
I.S. EN 13094:2015	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
UNE-EN 13445-4:2015	Unfired pressure vessels - Part 4: Fabrication
EN 15085-4:2007	Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
UNI EN 14394 : 2008	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
UNI EN 1775 : 2007	GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
UNI EN 14382 : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
16/30328759 DC : 0	BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
NF EN 1090-2 : 2009 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 13611:2016-09	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 13094:2015-07	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
BS EN 14394 : 2005	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
ISO 15607:2003	Specification and qualification of welding procedures for metallic materials General rules
BS EN 13480-4:2017	Metallic industrial piping Fabrication and installation
UNE-EN 13480-4:2017	Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.)
BS EN 15085-4:2007	Railway applications. Welding of railway vehicles and components Production requirements
BS EN ISO 15607:2003	Specification and qualification of welding procedures for metallic materials. General rules
EN 14276-1:2006+A1:2011	Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
UNE-EN 13094:2015	Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
BS EN 14276-1 : 2006	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 12732 : 2013	GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
UNE-EN 12732:2014+A1:2014	Gas infrastructure - Welding steel pipework - Functional requirements
BS EN 13084-1:2007	Free-standing chimneys General requirements
EN 1775:2007	Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
EN 14394:2005+A1:2008	Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN 14382:2005+A1:2009/AC:2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN ISO 15607:2003	Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 334:2005+A1:2009	Gas pressure regulators for inlet pressures up to 100 bar
12/30257022 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
17/30351224 DC : 0	BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN 334:2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
04/30125235 DC : DRAFT NOV 2004	EN 15085-2 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER
PREN 14276-1 : DRAFT 2017	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN 1090-2:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 334 : 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 13611:2015	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
UNE-EN 13611:2016	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 13445-4 : 2014	UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
BS EN 1775:2007	Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
BS EN 13094:2015	Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
I.S. EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13084-1:2007	Free-standing chimneys - Part 1: General requirements
DIN EN ISO 15607:2004-03	SPECIFICATION AND QUALIFICATION OF WELDING - PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
EN 12732:2013+A1:2014	Gas infrastructure - Welding steel pipework - Functional requirements
UNE-EN 12732:2014	Gas infrastructure - Welding steel pipework - Functional requirements
UNE-EN 14276-1:2007	Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

Standards Referencing This Book - (Show below) - (Hide below)

EN ISO 15614-11:2002	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
CR ISO 15608 : 2000	WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM
EN ISO 15609-2:2001/A1:2003	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING
PREN ISO 15614-6 : DRAFT 2003	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS
PREN ISO 15614-13 : DRAFT 2010	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING
EN ISO 15614-8:2016	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
EN ISO 15607:2003	Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart