Skip to content
Please enter a keyword to search

  • EN ISO 9169:2006

    Current The latest, up-to-date edition.

    Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)

    Available format(s): 

    Language(s): 

    Published date:  01-07-2006

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Terms and definitions
      2.1 General terms
      2.2 Performance characteristics
    3 Symbols and abbreviated terms
    4 Terms of reference of the test programme
    5 Performance characteristics
      5.1 Basic requirements
      5.2 Performance characteristics under laboratory
           conditions
      5.3 Performance characteristics under field conditions
    6 Test methods
      6.1 General requirements
      6.2 Requirements on the testing laboratory
      6.3 Response time and minimum averaging time under
           stable laboratory conditions
      6.4 Repeatability, lack of fit and limit of detection
           under stable laboratory conditions
      6.5 Repeatability of the calibration method specified
           in the terms of reference under stable laboratory
           conditions
      6.6 Drift under stable laboratory conditions
      6.7 Sensitivity coefficients of interferent influence
           quantities under stable laboratory conditions
      6.8 Sensitivity to external influence quantities
           under stable laboratory conditions
      6.9 Standard deviation of paired measurements under
           field conditions
      6.10 Drift under field conditions
      6.11 Availability under field conditions
    7 Test report
    Annex A (informative) Examples
    Bibliography

    Abstract - (Show below) - (Hide below)

    ISO 9169:2006 provides definitions and specifies methods to determine performance characteristics of an identified automatic air quality measuring system. Tests are carried out under stable laboratory conditions or field conditions. The automatic measuring system is considered as a black box operated according to specified procedures.ISO 9169:2006 applies to measuring systems for which the following information is available: a description of the automatic measuring system providing the result of measurement in the physical unit of the measurand; operating procedures of the automatic measuring system including, where appropriate, the procedures of routine adjustment, routine verification and calibration; terms of reference for the test program specifying the client requirements and test conditions.ISO 9169:2006 applies to measuring systems for which it is possible to apply several reference materials with accepted values with known uncertainty for the measurand, within the range of application.ISO 9169:2006 does not specify the number of automatic measuring systems to be tested.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 264
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    PD CEN/TR 15983:2010 Stationary source emissions. Guidance on the application of EN 14181:2004
    PD CEN/TS 16980-1:2016 Photocatalysis. Continuous flow test methods Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
    UNE 83321:2017 EX Concrete with photocatalytic activity. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials. Continuous flow test method
    I.S. EN 12619:2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
    EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
    EN 1948-4:2010+A1:2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
    CEN/TR 15983:2010 Stationary source emissions - Guidance on the application of EN 14181:2004
    EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
    I.S. EN 15267-4:2017 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
    DIN EN 15267-4:2015-08 (Draft) AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
    PREN 12619 : DRAFT 2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
    I.S. EN 1948-4:2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    BS EN 15483:2008 Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy
    11/30238654 DC : 0 BS EN 12619 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
    14/30303591 DC : 0 BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS
    UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
    S.R. CEN/TS 16980-1:2016 PHOTOCATALYSIS - CONTINUOUS FLOW TEST METHODS - PART 1: DETERMINATION OF THE DEGRADATION OF NITRIC OXIDE (NO) IN THE AIR BY PHOTOCATALYTIC MATERIALS
    S.R. CEN/TS 15674:2007 AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS
    CEN/TS 16980-1:2016 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
    DIN EN 1076:2010-04 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
    DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
    DIN EN 15267-3:2008-03 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; German version EN 15267-3:2007
    VDI 3478 Blatt 1:2011-03 Biological waste gas purification - Bioscrubbers
    VDI 3786 Blatt 1:2013-08 Environmental meteorology - Meteorological measurements - Fundamentals
    VDI 3783 Blatt 7:2017-05 Environmental meteorology - Prognostic mesoscale wind field models - Evaluation for dynamically and thermally induced flow fields
    VDI 3477:2016-03 Biological waste gas purification - Biofilters
    VDI 3783 Blatt 9:2017-05 Environmental meteorology - Prognostic microscale wind field models - Evaluation for flow around buildings and obstacles
    09/30198710 DC : 0 BS EN 1948-4 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    DIN EN 1948-4:2014-03 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    BS EN 15267-4:2017 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
    UNI EN 15483 : 2009 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
    DD CEN/TS 15674:2007 Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods
    DIN EN 15483 E : 2009 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
    I.S. EN 15483:2008 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
    BS EN 1076:2009 Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods
    UNI EN 1076 : 2010 WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS
    UNI EN 12619 : 2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
    DIN EN 15483:2009-02 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
    15/30318313 DC : 0 BS EN 15267-4 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCE
    UNE-EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
    UNE-CEN/TR 15983:2011 IN Stationary source emissions - Guidance on the application of EN 14181:2004
    BS EN 12619:2013 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method
    UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
    I.S. EN 1076:2009 WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS
    EN 15483:2008 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
    EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
    EN 15267-3:2007 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
    DD CEN/TS 1948-4:2007 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Sampling and analysis of dioxin-like PCBs
    BS EN 1948-4 : 2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    S.R. CEN TS 1948-4:2007 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    S.R. CEN TR 15983:2010 STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN 14181:2004
    UNI EN 1948-4 : 2014 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    BS EN 15267-3:2007 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
    CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
    I.S. EN 15267-3:2007 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO 11843-2:2000 Capability of detection — Part 2: Methodology in the linear calibration case
    ISO 11843-1:1997 Capability of detection Part 1: Terms and definitions
    ISO 11095:1996 Linear calibration using reference materials
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective