BS EN 16910-1:2018
|
Railway applications. Rolling stock. Requirements for non-destructive testing on running gear in railway maintenance Wheelsets |
17/30361503 DC : 0
|
BS EN ISO 20769-1 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
DIN EN 16753:2016-09
|
GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES |
PREN 12493 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
17/30346738 DC : 0
|
BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
PREN 1442 : DRAFT 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
16/30348296 DC : DRAFT DEC 2016
|
BS EN 14460 - EXPLOSION RESISTANT EQUIPMENT |
BS EN 16407-2:2014
|
Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Double wall radiographic inspection |
PREN 10225-4 : DRAFT 2017
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
I.S. EN 12681-1:2017
|
FOUNDING - RADIOGRAPHIC TESTING - PART 1: FILM TECHNIQUES |
I.S. EN 16771:2016
|
RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
I.S. EN 16753:2016
|
GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES |
I.S. EN 12493:2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
15/30320416 DC : 0
|
BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
16/30334287 DC : 0
|
BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
18/30369304 DC : DRAFT APR 2018
|
BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
17/30326179 DC : 0
|
BS EN 16729-4 - RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 4: QUALIFICATION OF PERSONNEL FOR NON-DESTRUCTIVE TESTING ON RAILS |
17/30362892 DC : 0
|
BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
I.S. EN 10216-2:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 10228-3:2016
|
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
BS EN 13480-5:2017
|
Metallic industrial piping Inspection and testing |
BS EN 10216-2:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 1371-2:2015-04
|
Founding - Liquid penetrant testing - Part 2: Investment castings; German version EN 1371-2:2015 |
DIN EN 12732:2014-07
|
Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
DIN EN 1473:2016-10
|
Installation and equipment for liquefied natural gas - Design of onshore installations |
BS EN 14141:2013
|
Valves for natural gas transportation in pipelines. Performance requirements and tests |
UNE-EN 14334:2015
|
LPG equipment and accessories - Inspection and testing of LPG road tankers |
BS EN 10228-2:2016
|
Non-destructive testing of steel forgings Penetrant testing |
UNE-EN 15313:2017
|
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance |
BS EN 10305-2:2016
|
Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
DIN EN 14893:2014-09
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
DIN EN 10305-1:2016-08
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
BS EN 14730-1:2017
|
Railway applications. Track. Aluminothermic welding of rails Approval of welding processes |
BS EN 13018:2016
|
Non-destructive testing. Visual testing. General principles |
BS EN 1369:2012
|
Founding. Magnetic particle testing |
DIN EN 1369:2013-01
|
Founding - Magnetic particle testing |
I.S. EN 10305-2:2016
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
I.S. EN 10216-4:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
I.S. EN 1371-2:2015
|
FOUNDING - LIQUID PENETRANT INSPECTION - PART 2: INVESTMENT CASTINGS |
DIN EN 10228-1:1999-07
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION |
EN 50052:2016
|
High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures |
EN 10305-3:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
EN 12681-1:2017
|
Founding - Radiographic testing - Part 1: Film techniques |
EN 10228-2:2016
|
Non-destructive testing of steel forgings - Part 2: Penetrant testing |
EN 13018:2016
|
NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
EN 12681-2:2017
|
Founding - Radiographic testing - Part 2: Techniques with digital detectors |
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
EN 12080:2017
|
Railway applications - Axleboxes - Rolling bearings |
EN 10305-5:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
CEN/TR 16638:2014
|
Non-destructive testing - Penetrant and magnetic particle testing using blue light |
EN 10305-6:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
UNI EN 12732 : 2014
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
EN 13100-1:2017
|
Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination |
EN 13110:2012+A1:2017
|
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
EN 10228-4:2016
|
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
DIN 25435-2:2014-01
|
In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing |
14/30295258 DC : 0
|
BS EN 16714-1 - NON-DESTRUCTIVE TESTING - THERMOGRAPHIC TESTING - PART 1: GENERAL PRINCIPLES |
14/30285793 DC : 0
|
BS EN 16771 - RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
PD CEN/TR 16638:2014
|
Non-destructive testing. Penetrant and magnetic particle testing using blue light |
PREN 1090-3 : DRAFT 2017
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
13/30248693 DC : 0
|
BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
14/30300966 DC : 0
|
BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
PREN 13018 : DRAFT 2015
|
NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
UNI EN 10217-7 : 2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
BS EN 16407-1:2014
|
Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Tangential radiographic inspection |
PREN 12953-4 : DRAFT 2017
|
SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
17/30348961 DC : 0
|
BS EN 12953-4 - SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
BS EN 50052:2016
|
High-voltage switchgear and controlgear. Gas-filled cast aluminium alloy enclosures |
PREN 1090-2 : DRAFT 2015
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
15/30304304 DC : 0
|
BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
14/30302601 DC : 0
|
BS EN ISO 18081 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - LEAK DETECTION BY MEANS OF ACOUSTIC EMISSION |
DIN EN 14893 E : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
I.S. EN 16125:2015
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
UNE-EN 16668:2016
|
Industrial valves - Requirements and testing for metallic valves as pressure accessories |
I.S. EN 15313:2016
|
RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE |
UNI CEN/TR 15589 : 2014
|
NON DESTRUCTIVE TESTING - CODE OF PRACTICE FOR THE APPROVAL OF NDT PERSONNEL BY RECOGNISED THIRD PARTY ORGANISATIONS UNDER THE PROVISIONS OF DIRECTIVE 97/23/EC |
I.S. EN 16668:2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
EN 10228-1:1999
|
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
UNE-EN 13445-5:2015
|
Unfired pressure vessels - Part 5: Inspection and testing |
I.S. EN 13480-5:2017
|
METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING |
PREN 12080 : DRAFT 2015
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
EN 16991:2018
|
Risk-based inspection framework |
UNE-EN 13480-5:2017
|
Metallic industrial piping - Part 5: Inspection and testing |
EN 13480-5:2017
|
Metallic industrial piping - Part 5: Inspection and testing |
I.S. EN 50052:2016
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES |
I.S. EN 14460:2018
|
EXPLOSION RESISTANT EQUIPMENT |
UNE-EN 10228-2:2016
|
Non-destructive testing of steel forgings - Part 2: Penetrant testing |
DIN EN 10216-5:2014-03
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
DIN EN 14730-1:2014-05 (Draft)
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
DIN EN 15085-1:2013-11
|
Railway applications - Welding of railway vehicles and components - Part 1: General (includes Amendment A1:2013) |
DIN EN 1442:2008-04
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
DIN EN 10305-4 E : 2016
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
DIN EN 10305-6:2016-08
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
DIN EN 14334:2015-01
|
LPG equipment and accessories - Inspection and testing of LPG road tankers |
DIN EN 14584:2013-07
|
NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - EXAMINATION OF METALLIC PRESSURE EQUIPMENT DURING PROOF TESTING - PLANAR LOCATION OF AE SOURCES |
DIN EN 12080:2015-06 (Draft)
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
DIN EN 10216-2:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
BS EN 10216-4:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
UNE-EN 10305-3:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
UNE-EN 10305-1:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
UNE-EN 10305-5:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
DIN EN 10305-3:2016-08
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
BS EN 12080:2017
|
Railway applications. Axleboxes. Rolling bearings |
UNE-EN 14141:2014
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
BS EN 1473:2016
|
Installation and equipment for liquefied natural gas. Design of onshore installations |
UNE-EN 10305-4:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
I.S. EN 10216-3:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
DIN EN 1559-2:2014-12
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 10305-5:2016
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
I.S. EN 10216-1:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
I.S. EN 10228-2:2016
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 2: PENETRANT TESTING |
I.S. EN 10305-6:2016
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
I.S. EN 12080:2017
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
I.S. EN 10228-3:2016
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
DIN EN 1473:1997-11
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
I.S. EN 1369:2012
|
FOUNDING - MAGNETIC PARTICLE TESTING |
I.S. EN 10216-5:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
I.S. EN 10217-7:2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
DIN EN 13611:2019-06
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
I.S. EN 14140:2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
I.S. EN 1442:2017
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
I.S. EN 12732:2013
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
I.S. EN 13018:2016
|
NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
I.S. EN 1559-2:2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 14141:2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
I.S. EN 1473:2016
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
DIN EN 13110:2017-05
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
I.S. EN 14893:2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
I.S. EN 14584:2013
|
NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - EXAMINATION OF METALLIC PRESSURE EQUIPMENT DURING PROOF TESTING - PLANAR LOCATION OF AE SOURCES |
I.S. EN 14730-1:2017
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
I.S. EN 10305-4:2016
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
I.S. EN 10305-1:2016
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
DIN EN 10228-2:1998-06
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 2: PENETRANT TESTING |
DIN EN 12080:2017-11
|
Railway applications - Axleboxes - Rolling bearings |
I.S. EN 10305-3:2016
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
I.S. EN 13100-1:2017
|
NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION |
I.S. EN 15085-1:2007
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL |
I.S. EN 14334:2014
|
LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
I.S. EN 10228-4:2016
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
I.S. EN 10228-1:2016
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION |
DIN EN 12732:2000-09
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
DIN EN 12493:2017-01
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
UNI EN 12493 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
VDI 3405 Blatt 1:2013-10
|
Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
KTA 3403 : 2015(R2017)
|
CABLE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL OF NUCLEAR POWER PLANTS |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
DIN EN 16125:2016-03
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
CEN/TR 15589:2014
|
Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC |
17/30364387 DC : 0
|
BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
16/30336507 DC : 0
|
BS EN 12493:2013 AMD 2 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
16/30332608 DC : DRAFT JAN 2016
|
BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
CEI EN 50052 : 1998
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES |
14/30302883 DC : 0
|
BS EN 16714-2 - NON-DESTRUCTIVE TESTING - THERMOGRAPHIC TESTING - PART 2: EQUIPMENT |
PREN 1473 : DRAFT 2018
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
17/30357291 DC : 0
|
BS EN 12819 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND REQUALIFICATION OF LPG PRESSURE VESSELS GREATER THAN 13 M[3] |
DIN EN 15313 E : 2016
|
RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE |
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
13/30266592 DC : 0
|
BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
16/30328759 DC : 0
|
BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
PREN 50069 : DRAFT 2017
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
PREN 12799 : DRAFT 2017
|
BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
DIN EN 16753 E : 2016
|
GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES |
I.S. EN 16910-1:2018
|
RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NON-DESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE - PART 1: WHEELSETS |
UNI EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
EN 1473:2016
|
Installation and equipment for liquefied natural gas - Design of onshore installations |
13/30279798 DC : 0
|
BS EN 15313 - RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE |
BS EN 16714-1:2016
|
Non-destructive testing. Thermographic testing General principles |
16/30342040 DC : 0
|
BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION |
UNE-EN 16714-2:2017
|
Non-destructive testing - Thermographic testing - Part 2: Equipment |
17/30347443 DC : DRAFT JUN 2017
|
BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
15/30303100 DC : 0
|
BS EN 50052 - CAST ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
BS EN 16771:2016
|
Railway applications. Infrastructure. Aluminothermic welding of grooved rails |
UNI EN 16407-2 : 2014
|
NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
I.S. EN 12953-4:2002
|
SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
I.S. EN 16407-2:2014
|
NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
PREN 10210-2 : DRAFT 2016
|
HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
I.S. EN 16991:2018
|
RISK-BASED INSPECTION FRAMEWORK |
I.S. EN 13445-5:2014
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
I.S. EN 13110:2012
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
EN 13445-5 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
DIN EN 1092-1:2016-05 (Draft)
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
BS EN 16125:2015
|
LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
BS EN 12681-1:2017
|
Founding. Radiographic testing Film techniques |
BS EN 16668 : 2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
PREN 12542 : DRAFT 2016
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
UNE-EN 10228-4:2016
|
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
UNE-EN 10228-3:2016
|
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
EN 14025:2013+A1:2016
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
BS EN 14025 : 2013
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
I.S. EN 1092-1:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
UNE-EN 10228-1:2016
|
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
I.S. EN 13611:2015
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 13018:2016-06
|
NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
DIN EN 13110:2012-07
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
DIN EN 10228-1:2016-10
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION |
DIN EN 10216-3:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
DIN EN 14141:2013-08
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
DIN EN 14140:2015-03
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
DIN EN 14584 E : 2013
|
NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - EXAMINATION OF METALLIC PRESSURE EQUIPMENT DURING PROOF TESTING - PLANAR LOCATION OF AE SOURCES |
UNI EN 10216-2 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
UNE-EN 14730-1:2018
|
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
UNE-EN 10216-2:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 10305-2:2016-08
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
BS EN 10305-5:2010
|
Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
BS EN 10217-7:2014
|
Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
UNE-EN 10216-4:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
DIN EN 10305-5:2016-08
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
UNE-EN 1369:2013
|
Founding - Magnetic particle testing |
DIN EN 13100-1:2017-08
|
NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION |
EEMUA 158 : 2014
|
CONSTRUCTION SPECIFICATION FOR FIXED OFFSHORE STRUCTURES |
EN 13094:2015
|
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
I.S. EN 13094:2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
UNE-EN 16125:2016
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
UNI EN 14334 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
UNI EN 15085-1 : 2014
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL |
EN 1559-2:2014
|
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
UNI EN 1559-2 : 2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
UNI EN 14893 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
UNI EN 14141 : 2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
UNI EN 10216-4 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
UNI EN 10216-1 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
UNI EN 14140 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
UNI EN 14584 : 2013
|
NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - EXAMINATION OF METALLIC PRESSURE EQUIPMENT DURING PROOF TESTING - PLANAR LOCATION OF AE SOURCES |
UNI EN 10216-3 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
15/30270299 DC : 0
|
BS EN 16910 - RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NONDESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE |
PD CEN/TR 15589:2014
|
Non destructive testing. Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC |
16/30337806 DC : 0
|
BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF) |
PREN 50052 : DRAFT 2015
|
CAST ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
15/30315663 DC : 0
|
BS EN 13018 - NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
BS EN 12681-2:2017
|
Founding. Radiographic testing Techniques with digital detectors |
PREN 12953-5 : DRAFT 2018
|
SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
17/30361506 DC : 0
|
BS EN ISO 20769-2 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AN DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
16/30336440 DC : DRAFT MAR 2016
|
BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
PREN 13100-1 : DRAFT 2015
|
NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION |
UNE-EN 16753:2016
|
Gas cylinders - Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases |
PREN 10253-4 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
BS EN 16714-2:2016
|
Non-destructive testing. Thermographic testing Equipment |
BS EN 16753:2016
|
Gas cylinders. Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases |
13/30281366 DC : 0
|
BS EN 1371-2 - FOUNDING - LIQUID PENETRANT TESTING - PART 2: INVESTMENT CASTINGS |
15/30331867 DC : 0
|
BS EN ISO 10855-3 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING |
15/30320774 DC : 0
|
BS EN 13100-1 - NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION |
UNE-EN 50052:2017
|
High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures |
I.S. EN 16407-1:2014
|
NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
PREN 1371-2 : DRAFT 2013
|
FOUNDING - LIQUID PENETRANT TESTING - PART 2: INVESTMENT CASTINGS |
S.R. CEN/TR 15589:2014
|
NON DESTRUCTIVE TESTING - CODE OF PRACTICE FOR THE APPROVAL OF NDT PERSONNEL BY RECOGNISED THIRD PARTY ORGANISATIONS UNDER THE PROVISIONS OF DIRECTIVE 97/23/EC |
EN 16910-1:2018
|
Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets |
EN 14460:2018
|
Explosion resistant equipment |
17/30360051 DC : 0
|
BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
KTA 3211.1 : 2015
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
UNE-EN 13611:2016
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
18/30369695 DC : 0
|
BS EN 12953-5 - SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
16/30326248 DC : 0
|
BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
DIN EN 13611:2016-09
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
17/30348949 DC : 0
|
BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
DIN EN 12493:2014-03
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
PREN 14893 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
UNI EN 13445-5 : 2015
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
PREN 16729-4 : DRAFT 2017
|
RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 4: QUALIFICATION OF PERSONNEL FOR NON-DESTRUCTIVE TESTING ON RAILS |
EN 12480:2018
|
Gas meters - Rotary displacement gas meters |
I.S. EN 12480:2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 13094:2015-07
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
DIN EN 10228-4:2016-10
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
DIN EN 10216-4:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
DIN EN 10228-2:2016-10
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 2: PENETRANT TESTING |
DIN EN 10217-7:2015-01
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
DIN EN 10228-3:2016-10
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
BS EN 1559-2:2014
|
Founding. Technical conditions of delivery Additional requirements for steel castings |
UNE-EN 14140:2015
|
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
BS EN 10216-5:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
UNE-EN 10305-6:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
BS EN 14140:2014
|
LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction |
BS EN 10216-3:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
BS EN 10305-6:2016
|
Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
UNE-EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
UNE-EN 13018:2016
|
Non-destructive testing - Visual testing - General principles |
UNE-EN 1371-2:2015
|
Founding - Liquid penetrant testing - Part 2: Investment castings |
BS EN 10228-4:2016
|
Non-destructive testing of steel forgings Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
UNE-EN 14584:2013
|
Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources |
BS EN 10305-3:2016
|
Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
UNE-EN 13110:2012
|
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
UNE-EN 13094:2015
|
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
UNE-EN 1442:2017
|
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
UNE-EN 14025:2014
|
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
BS EN 10305-1:2016
|
Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
UNE-EN 10216-3:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
BS EN 12732 : 2013
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
BS EN 1442 : 2006
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
BS EN 10228-3:2016
|
Non-destructive testing of steel forgings Ultrasonic testing of ferritic or martensitic steel forgings |
UNE-EN 13100-1:2017
|
Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination |
UNE-EN 13110:2012+A1:2017
|
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
UNE-EN 10216-5:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
UNE-EN 12732:2014+A1:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
UNE-EN 10216-1:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
BS EN 14584:2013
|
Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources |
EN 1442:2017
|
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
EN 14893:2014
|
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
EN 16668:2016+A1:2018
|
Industrial valves - Requirements and testing for metallic valves as pressure accessories |
EN 16407-2:2014
|
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection |
EN 15085-1:2007+A1:2013
|
Railway applications - Welding of railway vehicles and components - Part 1: General |
EN 1369:2012
|
Founding - Magnetic particle testing |
EN 1371-2:2015
|
Founding - Liquid penetrant testing - Part 2: Investment castings |
EN 15313:2016
|
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance |
EN 16125:2015
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
EN 16753 : 2016
|
GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES |
EN 16714-1:2016
|
Non-destructive testing - Thermographic testing - Part 1: General principles |
EN 14141:2013
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
EN 16714-2:2016
|
Non-destructive testing - Thermographic testing - Part 2: Equipment |
EN 14584:2013
|
Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources |
EN 14140:2014/AC:2015
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
EN 14334:2014
|
LPG equipment and accessories - Inspection and testing of LPG road tankers |
EN 14730-1:2017
|
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
EN 16407-1:2014
|
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection |
DIN EN 15313:2016-09
|
RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE |
PREN 10253-2 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
UNE-EN 14893:2014
|
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
UNE-EN 16714-1:2017
|
Non-destructive testing - Thermographic testing - Part 1: General principles |
BS EN 12493 : 2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
17/30364380 DC : 0
|
BS EN 50064 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
14/30288835 DC : 0
|
BS EN 16753 - GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES |
17/30346741 DC : 0
|
BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
PD CEN/TS 17108:2017
|
Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice |
17/30346735 DC : 0
|
BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
14/30300118 DC : 0
|
BS EN 14334 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
15/30326251 DC : 0
|
BS EN 13110:2012 AMD 1 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
UNE-EN 15085-1:2008
|
Railway applications - Welding of railway vehicles and components - Part 1: General |
PREN 50064 : DRAFT 2017
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
UNI EN 16407-1 : 2014
|
NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
PREN 10219-2 : DRAFT 2016
|
COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
PREN 12819 : DRAFT 2017
|
LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND REQUALIFICATION OF LPG PRESSURE VESSELS GREATER THAN 13 M[3] |
BS EN 13445-5 : 2014
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
16/30328762 DC : 0
|
BS EN 13814-3 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 3: REQUIREMENTS FOR INSPECTION DURING DESIGN, MANUFACTURE, OPERATION AND USE |
S.R. CEN/TR 16638:2014
|
NON-DESTRUCTIVE TESTING - PENETRANT AND MAGNETIC PARTICLE TESTING USING BLUE LIGHT |
I.S. EN 12681-2:2017
|
FOUNDING - RADIOGRAPHIC TESTING - PART 2: TECHNIQUES WITH DIGITAL DETECTORS |
I.S. EN 14025:2013
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
UNE-EN 12493:2014
|
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
BS EN 13611:2015
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
EN 1092-1:2018
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
UNI EN 1092-1 : 2013
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
17/30359544 DC : 0
|
BS EN 12799 - BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
S.R. CEN/TR 17108:2017
|
NON-DESTRUCTIVE TESTING - LIGHTING IN PENETRANT AND MAGNETIC PARTICLE TESTING, GOOD PRACTICE |
17/30346732 DC : 0
|
BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
EN 12953-4:2018
|
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler |
16/30332614 DC : 0
|
BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
PREN 13611 : DRAFT 2017
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 12493:2013+A1:2014/AC:2015
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
DIN EN 10216-1:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
BS EN 10228-1:1999
|
Non-destructive testing of steel forgings Magnetic particle inspection |
BS EN 10216-1:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
BS EN 14893:2014
|
LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
BS EN 1371-2:2015
|
Founding. Liquid penetrant testing Investment castings |
BS EN 14334:2014
|
LPG equipment and accessories. Inspection and testing of LPG road tankers |
BS EN 15085-1 : 2007
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL |
BS EN 13100-1:2017
|
Non destructive testing of welded joints of thermoplastics semi-finished products Visual examination |
BS EN 10305-4:2016
|
Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
BS EN 13094:2015
|
Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction |
BS EN 13110 : 2012
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
CEN/TR 17108:2017
|
Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice |
EN 10216-4:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
EN 10305-1:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
I.S. EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 10228-3:1998-07
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
DIN EN 10228-4:1999-10
|
NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
EN 10305-4:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
DIN EN 10305-4:2016-08
|
STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
DIN EN 14140:2017-01
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
EN 12732:2013+A1:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
DIN EN 14730-1:2010-12
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
UNE-EN 12732:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
UNE-EN 16125:2020
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |