Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 1090-3:2008

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES

    Available format(s):  Hardcopy, PDF

    Superseded date:  01-05-2019

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Specifications and documentation
       4.1 Execution specification
            4.1.1 General
            4.1.2 Execution classes
            4.1.3 Tolerance types
            4.1.4 Tolerance class for shell structures
            4.1.5 Testing and acceptance criteria for welding
       4.2 Constructor's documentation
            4.2.1 Quality documentation
            4.2.2 Quality plan
            4.2.3 Safety during erection
            4.2.4 Execution documentation
    5 Constituent products
       5.1 General
       5.2 Identification, inspection documents and traceability
       5.3 Parent material
       5.4 Aluminium products
       5.5 Welding consumables
       5.6 Mechanical fasteners
            5.6.1 Bolts, nuts and plain washers
            5.6.2 Studs
            5.6.3 Rivets
            5.6.4 Self-drilling and self-tapping screws
            5.6.5 Bearings
       5.7 Adhesive bonding
    6 Preparation
       6.1 General
       6.2 Identification
       6.3 Handling, storage and transportation
       6.4 Cutting
       6.5 Forming
       6.6 Holing for fasteners
       6.7 Cut outs
       6.8 Full contact bearing surfaces
       6.9 Assemblies
       6.10 Heat treatment
       6.11 Straightening
    7 Welding
       7.1 General
       7.2 Welding plan
            7.2.1 Requirement for a welding plan
            7.2.2 Content of a welding plan
       7.3 Welding process
       7.4 Qualification of welding procedures and welding personnel
            7.4.1 Qualification of welding procedures
            7.4.2 Validity of the welding procedure qualification
            7.4.3 Qualification of welders and welding operators
            7.4.4 Welding coordination personnel
       7.5 Preparation and execution of welding
            7.5.1 General
            7.5.2 Joint preparation
            7.5.3 Weather protection
            7.5.4 Assembly for welding
            7.5.5 Temporary attachments
            7.5.6 Tack welds
            7.5.7 Preheating and interpass temperature
            7.5.8 Butt welds
            7.5.9 Slot and plug welds
            7.5.10 Other welds
       7.6 Acceptance criteria
       7.7 Post-weld heat treatment
    8 Mechanical fastening and adhesive bonding
       8.1 Joint assembly for mechanical fastening
            8.1.1 Preparation of contact surfaces
            8.1.2 Fit-up
            8.1.3 Preparations of contact surfaces in slip-resistant
                  connections
       8.2 Bolted connections
            8.2.1 General
            8.2.2 Bolts
            8.2.3 Fitted bolts
            8.2.4 Countersunk bolts
            8.2.5 Nuts
            8.2.6 Washers
       8.3 Tightening of bolted connections
            8.3.1 Non-preloaded connections
            8.3.2 Preloaded connections
       8.4 Riveting
            8.4.1 General
            8.4.2 Installation of rivets
       8.5 Fastening of cold formed members and sheeting
       8.6 Adhesive bonded connections
    9 Erection
       9.1 General
       9.2 Site conditions
       9.3 Erection method statement
       9.4 Supports
       9.5 Execution on site
            9.5.1 Site survey
            9.5.2 Marking
            9.5.3 Handling and storage at site
            9.5.4 Erection methods
            9.5.5 Alignment and grouting
       9.6 Protection of surfaces, cleaning after erection
    10 Surface treatment
       10.1 General
       10.2 Protection of the structure and components
       10.3 Protection of contact surfaces and fasteners
            10.3.1 General
            10.3.2 Contact surfaces aluminium-to-aluminium and
                   aluminium-to-plastics
            10.3.3 Contact surfaces of aluminium and steel or wood
            10.3.4 Contact surfaces of aluminium and concrete,
                   brickwork and plaster, etc
            10.3.5 Fasteners
            10.3.6 Bonded joints
       10.4 Fire protection
    11 Geometrical tolerances
       11.1 Types of tolerances
       11.2 Essential tolerances
            11.2.1 General
            11.2.2 Manufacturing tolerances
            11.2.3 Erection tolerances
       11.3 Functional tolerances
            11.3.1 General
            11.3.2 Manufacturing tolerances
    12 Inspection, testing and corrections
       12.1 General
       12.2 Constituent products and components
            12.2.1 Constituent products
            12.2.2 Components
       12.3 Preparation
            12.3.1 Forming
            12.3.2 Geometrical dimensions of components
       12.4 Welding
            12.4.1 Inspection stages
            12.4.2 Methods of inspection and personnel qualification
            12.4.3 Extent of inspection
            12.4.4 Acceptance criteria for welds
            12.4.5 Repair welds
            12.4.6 Inspection of temporary attachment locations
                   after removal
       12.5 Mechanical fasteners
            12.5.1 Inspection of connections with non-preloaded bolts
            12.5.2 Inspection of connections with preloaded bolts
            12.5.3 Inspection of riveted connections
       12.6 Adhesive bonding
       12.7 Nonconforming products
            12.7.1 Nonconforming constituent products
            12.7.2 Nonconforming components and structures
    Annex A (normative) Required additional information, options to
            be specified and requirements for execution classes
          A.1 List of required information
          A.2 List of options to be specified
          A.3 Requirements related to execution classes
    Annex B (informative) Checklist for the content of a quality plan
          B.1 Introduction
          B.2 Content
              B.2.1 Management
              B.2.2 Specification review
              B.2.3 Documentation
              B.2.4 Inspection and testing procedures
    Annex C (normative) Cruciform weld test
          C.1 Introduction
          C.2 Test piece
          C.3 Examination and testing
    Annex D (normative) Procedure for determination of slip factor
          D.1 The purpose of testing
          D.2 Significant variables
          D.3 Test specimens
          D.4 Slip test procedure and evaluation of results
          D.5 Extended creep test procedure and evaluation
          D.6 Test results
    Annex E (informative) Fastening of cold formed members and sheeting
          E.1 General
          E.2 Use of self-tapping and self-drilling screws
          E.3 Use of blind rivets
          E.4 Fastening sidelaps
    Annex F (informative) Surface treatment
          F.1 Anodic oxidation
          F.2 Coatings
              F.2.1 General
              F.2.2 Pre-treatment
              F.2.3 Base coat
              F.2.4 Final coat
              F.2.5 Coatings with bitumen or bituminous combinations
              F.2.6 Repair coatings
          F.3 Passivation
    Annex G (normative) Geometrical tolerances - Essential tolerances
          G.1 Manufacturing tolerances
              G.1.1 General
              G.1.2 Welded I-sections
              G.1.3 Welded box sections
              G.1.4 Webs
              G.1.5 Components
              G.1.6 Base plates and end plate connections
              G.1.7 Column splices
              G.1.8 Lattice components
          G.2 Erection tolerances
              G.2.1 Columns
              G.2.2 Beams
              G.2.3 Full contact bearing
    Annex H (normative) Geometrical tolerances - Functional tolerances
          H.1 General
          H.2 Manufacturing tolerances
              H.2.1 Box sections
              H.2.2 Components
              H.2.3 Stiffeners
              H.2.4 Fastener holes, notches and edges
              H.2.5 Lattice components
          H.3 Erection tolerances
              H.3.1 Columns
              H.3.2 Beams, rafters and trusses
          H.4 Bridges
    Annex I (normative) Geometrical tolerances - Shell structures
          I.1 General
          I.2 Out-of roundness tolerances
          I.3 Non-intended eccentricity due to execution
          I.4 Dent tolerances
          I.5 Interface flatness tolerances
    Annex J (informative) Designation of requirements to welds on
            drawings
          J.1 General
          J.2 Global specification
          J.3 Specific designations for welds, part of welds, details
    Annex K (informative) Recommendations for description of site
            conditions and erection in the execution specification
          K.1 Site conditions
          K.2 Erection method statement
    Annex L (informative) Guide for preparation of the execution
            specification for quality requirements of welds
          L.1 General
          L.2 Utilization grades and utilization ranges
              L.2.1 General
              L.2.2 Utilization grade for components and structures
                    in service category SC1
              L.2.3 Utilization grade for components and structures
                    in service category SC2
          L.3 Extent of additional NDT
              L.3.1 Extent of NDT (%) for components/structures in
                    service category SC1
              L.3.2 Extent of additional NDT (%) for
                    components/structures in service category SC2
          L.4 Acceptance criteria for welds
              L.4.1 Acceptance criteria for welds in service
                    category SC1
              L.4.2 Acceptance criteria for welds in service
                    category SC2
    Annex M (informative) Guide for specification of quality
            requirements for components and structures in SC2
    Annex N (informative) Chart for development and use of a
            welding procedure specification (WPS)
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes requirements independent of the type and shape of the aluminium structure, and this is applicable to structures under predominantly static loads as well as structures subject to fatigue. It specifies requirements related to the execution classes that are linked with consequence classes.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 1999-1-1:2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX)
    I.S. EN 1999-1-1 NATIONAL ANNEX:2007 IRISH NATIONAL ANNEX TO EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
    ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)
    ISO 8839:1986 Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals
    EN ISO 15981 : 2002 OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD ALA/ALA (ISO 15981:2002)
    ISO 9018:2015 Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints
    EN 14399-8:2007 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
    ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
    ISO 7090:2000 Plain washers, chamfered Normal series Product grade A
    EN ISO 15481 : 1999 CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15481:1999)
    EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
    EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
    ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
    EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
    EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
    EN ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
    ISO 13918:2008 Welding Studs and ceramic ferrules for arc stud welding
    EN 754-3:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
    ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head AlA/St
    ISO 15480:1999 Hexagon washer head drilling screws with tapping screw thread
    EN ISO 7049:2011 Cross-recessed pan head tapping screws (ISO 7049:2011)
    ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
    EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
    ISO 1479:2011 Hexagon head tapping screws
    EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
    EN ISO 7091 : 2000 PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C
    EN 755-5:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
    EN ISO 6789:2003 Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
    EN ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
    EN 1301-1:2008 Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
    ISO 13920:1996 Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position
    EN ISO 7094:2000/AC:2002 PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C
    EN 14399-3:2015 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
    ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
    EN 12487:2007/AC:2008 CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
    EN ISO 7093-2 : 2000 PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C
    ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12
    ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
    ISO 10042:2005 Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
    ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements
    EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
    EN 573-2:1994 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
    EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
    ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
    ISO 10642:2004 Hexagon socket countersunk head screws
    EN 1011-4:2000/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS
    EN 1321:1996 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
    EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
    EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
    EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
    EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
    EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
    ISO 4016:2011 Hexagon head bolts Product grade C
    EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
    EN ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
    EN ISO 15977 : 2002 OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD ALA/ST
    ISO 4034:2012 Hexagon regular nuts (style 1) Product grade C
    CR ISO 17663 : 2001 WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES
    EN ISO 1481:2011 Slotted pan head tapping screws (ISO 1481:2011)
    EN 485-4:1993 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
    EN 755-3:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
    ISO 2320:2015 Fasteners Prevailing torque steel nuts Functional properties
    EN 1714:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
    EN ISO 7090 : 2000 PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000)
    EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    ISO 17123-7:2005 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 7: Optical plumbing instruments
    ISO 10509:2012 Hexagon flange head tapping screws
    EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
    ISO 14731:2006 Welding coordination Tasks and responsibilities
    EN 1999-1-4:2007/A1:2011 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
    EN ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
    ISO 7049:2011 Cross-recessed pan head tapping screws
    EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
    ISO 7976-2:1989 Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points
    EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
    EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
    EN 755-4:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
    ISO/TR 17663:2001 Welding Guidelines for quality requirements for heat treatment in connection with welding and allied processes
    EN ISO 7093-1 : 2000 PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000)
    ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
    EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
    EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
    EN 20898-2 : 1993 MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992)
    ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
    ISO 18273:2015 Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification
    EN 586-3:2001 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
    ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
    EN 755-7:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
    EN ISO 9018:2015 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015)
    EN 1999-1-5:2007/AC:2009 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES
    EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
    ISO 17123-3:2001 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 3: Theodolites
    ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
    EN 1337-8:2007 Structural bearings - Part 8: Guide Bearings and Restraint Bearings
    EN 12020-2:2016/AC:2017 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
    EN 1301-3:2008 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
    EN 754-6:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
    ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
    EN ISO 4034:2012/AC:2013 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
    EN 755-6:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
    ISO 4762:2004 Hexagon socket head cap screws
    EN 1337-11:1997 Structural bearings - Part 11: Transport, storage and installation
    ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/St
    EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
    ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
    EN ISO 13920:1996 Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996)
    ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head — AIA/St
    ISO 1481:2011 Slotted pan head tapping screws
    EN 12373-1 : 2001 ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM
    ISO 7089:2000 Plain washers Normal series Product grade A
    ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
    EN 1706:2010 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
    EN ISO 15974 : 2000 CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - ALA/ST
    ISO 4463-1:1989 Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria
    ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10
    ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head AlA/St
    ISO 2009:2011 Slotted countersunk flat head screws Product grade A
    EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
    EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
    ISO 7091:2000 Plain washers Normal series Product grade C
    EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
    EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
    EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
    EN ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)
    EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
    ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12
    EN 14399-6:2015 High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
    EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations
    ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10
    EN 754-5:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
    ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10
    EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
    EN ISO 18273:2015 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015)
    EN 1337-3:2005 Structural bearings - Part 3: Elastomeric bearings
    EN ISO 14731:2006 Welding coordination - Tasks and responsibilities (ISO 14731:2006)
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 586-1:1997 Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery
    EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
    EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
    EN ISO 10642:2004/A1:2012 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004/AMD 1:2012)
    EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
    EN 14399-4:2015 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
    EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
    EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    ISO 7976-1:1989 Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments
    ISO 6789:2003 Assembly tools for screws and nuts Hand torque tools Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
    EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
    EN 14399-7:2007 High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
    EN 1999-1-2:2007/AC:2009 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
    ISO 7093-2:2000 Plain washers Large series Part 2: Product grade C
    EN 14399-5:2015 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
    ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
    ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
    EN ISO 15480 : 1999 HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
    EN 1559-4:2015 Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
    ISO 17123-4:2012 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors)
    EN 28839 : 1991 MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS (ISO 8839:1986)
    EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
    EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
    ISO 17123-1:2014 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 1: Theory
    EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
    EN ISO 7089 : 2000 PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A
    ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
    EN 970:1997 Non-destructive examination of fusion welds - Visual examination
    EN 1337-5:2005 Structural bearings - Part 5: Pot bearings
    EN ISO 15973 : 2000 CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - ALA/ST
    ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/AIA
    EN ISO 15978 : 2002 OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD ALA/ST
    EN 754-4:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
    ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
    EN ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)
    EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
    EN ISO 17659:2004 Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)
    ISO 17659:2002 Welding — Multilingual terms for welded joints with illustrations
    EN 573-1:2004 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
    ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements
    EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    EN 1999-1-3:2007/A1:2011 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE
    EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
    EN 12020-1:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
    EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
    ISO 8062:1994 Castings System of dimensional tolerances and machining allowances
    EN ISO 4762:2004 Hexagon socket head cap screws (ISO 4762:2004)
    EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
    ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
    ISO 4014:2011 Hexagon head bolts Product grades A and B
    ISO 4018:2011 Hexagon head screws Product grade C
    EN 1320:1996 Destructive tests on welds in metallic materials - Fracture test
    ISO 7093-1:2000 Plain washers Large series Part 1: Product grade A
    EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective