Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 12566-3:2016

    Current The latest, up-to-date edition.

    SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  19-09-2016

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    1 Scope
    2 Normative references
    3 Terms, definitions, symbols and abbreviated terms
    4 Product characteristics
    5 Testing, assessment and sampling methods
    6 Assessment and verification of constancy of performance – AVCP
    7 Classification and designation (Nominal designation)
    8 Marking, labelling and packaging
    Annex A (normative) Watertightness test
    Annex B (normative) Treatment efficiency test procedure
    Annex C (normative) Test methods for structural behaviour
    Annex D (normative) Mechanical characteristics used for structural behaviour calculation
    Annex E (informative) Analysis method
    Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 165
    Document Type Test Method
    Product Note NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
    Publisher National Standards Authority of Ireland
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    S.R. 66:2015 STANDARD RECOMMENDATION PROVIDING GUIDANCE TO WASTEWATER TREATMENT PRODUCTS IN COMPLIANCE WITH THE EN 12566 SERIES OF STANDARDS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 5664:1984 Water quality — Determination of ammonium — Distillation and titration method
    EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
    EN 14150:2006 Geosynthetic barriers - Determination of permeability to liquids
    ISO 6778:1984 Water quality — Determination of ammonium — Potentiometric method
    ISO 13229:2010 Thermoplastics piping systems for non-pressure applications Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings Determination of the viscosity number and K-value
    ISO 5663:1984 Water quality — Determination of Kjeldahl nitrogen — Method after mineralization with selenium
    EN ISO 11885:2009 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
    EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
    EN 978:1997 Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
    ISO 5815:1989 Water quality Determination of biochemical oxygen demand after 5 days (BOD 5) Dilution and seeding method
    EN 1899-1 : 1998 WATER QUALITY - DETERMINATION OF BIOCHEMICAL OXYGEN DEMAND AFTER N DAYS (BODN) - DILUTION AND SEEDING METHOD WITH ALLYTHIOUREA ADDITION
    ISO 1133-1:2011 Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
    EN 872:2005 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
    EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
    EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
    EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
    EN 25663 : 1993 WATER QUALITY - DETERMINATION OF KJELDAHL NITROGEN - METHOD AFTER MINERALIZATION WITH SELENIUM
    EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
    ISO 11732:2005 Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection
    EN ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
    EN ISO 11905-1 : 1998 WATER QUALITY - DETERMINATION OF NITROGEN - METHOD USING OXIDATIVE DIGESTION WITH PEROXODISULFATE
    EN 12311-2:2013 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
    ISO 11905-1:1997 Water quality — Determination of nitrogen — Part 1: Method using oxidative digestion with peroxodisulfate
    ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
    EN 16323:2014 Glossary of wastewater engineering terms
    ISO 6060:1989 Water quality — Determination of the chemical oxygen demand
    ISO 11885:2007 Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
    EN 12260:2003 Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
    ISO 15681-2:2003 Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA)
    ISO 10304-1:2007 Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
    EN ISO 15681-2:2004 Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2003)
    ISO 2555:1989 Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method
    EN 476:2011 General requirements for components used in drains and sewers
    EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
    ISO 13395:1996 Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    ISO 899-2:2003 Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading
    EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
    ISO 15705:2002 Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method
    EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
    EN ISO 6878:2004 Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004)
    EN ISO 14125:1998/A1:2011 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
    ISO 9001:2015 Quality management systems — Requirements
    EN 580:2003 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)
    ISO 14125:1998 Fibre-reinforced plastic composites Determination of flexural properties
    EN 858-1:2002/A1:2004 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    ISO 9967:2016 Thermoplastics pipes Determination of creep ratio
    ISO 6878:2004 Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method
    EN 1905:1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
    ISO 1133-2:2011 Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to time-temperature history and/or moisture
    EN ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
    EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    ISO 7150-1:1984 Water quality — Determination of ammonium — Part 1: Manual spectrometric method
    EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
    ISO 178:2010 Plastics Determination of flexural properties
    ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
    EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
    EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity
    EN ISO 14911 : 1999 WATER QUALITY - DETERMINATION OF DISSOLVED LI+, NA+, NH4+, K+, MN2+, CA2+, MG2+, SR2+ AND BA2+ USING ION CHROMATOGRAPHY - METHOD FOR WATER AND WASTE WATER
    EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    ISO 14911:1998 Water quality Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography Method for water and waste water
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
    EN ISO 13395 : 1996 WATER QUALITY - DETERMINATION OF NITRITE NITROGEN AND NITRATE NITROGEN AND THE SUM OF BOTH BY FLOW ANALYSIS (CFA AND FIA) AND SPECTROMETRIC DETECTION
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective