Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 14033-1:2017

    Current The latest, up-to-date edition.

    RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2017

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    National Foreword
    European foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Machine categorization
    5 Rolling stock gauge
    6 Frame
    7 Bogie and running gear
    8 Running safety
    9 Brakes
    10 Buffing and draw gear
    11 Operation of track circuits, axle-counters, treadles for
       level crossings, hot box detectors and unreleased brake
       detectors
    12 Running safety equipment
    13 Warning equipment and lights
    14 Drivers cabs and driving positions
    15 Safety design features
    16 Environmental conditions
    17 Aerodynamic effects
    18 Design for recovery purposes
    19 Machine marking
    20 User information
    Annex A (normative) - Application of technical requirements
            to machines categories
    Annex B (normative) - Special national conditions
    Annex C (normative) - Machine diagram with gauge and
            critical points
    Annex D (normative) - Free space at the end of the machine
    Annex E (informative) - Steps, handrails and door handles
    Annex F (informative) - Identification plate
    Annex G (normative) - Marking
    Annex H (normative) - On board safety equipment
    Annex I (informative) - Structure of European Standards for
            track construction and maintenance machines
    Annex J (informative) - Clause by clause comparison with
            Commission Regulation (EU) No 1302/2014 (Loc&Pas TSI)
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of EU Directive
             2008/57/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Specifies the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
    EN 14198:2016 Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
    EN 15437-1:2009 Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
    EN 15313:2016 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
    EN 15595:2009+A1:2011 RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION
    UIC 527-1 : 3ED 2005 COACHES, VANS AND WAGONS - DIMENSIONS OF BUFFER HEADS - TRACK LAYOUT ON S-CURVES
    EN 15611:2008+A1:2010 Railway applications - Braking - Relay valves
    EN 14363:2016 Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
    EN 62625-1:2013/A11:2017 ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION (IEC 62625-1:2013)
    UIC 520 : 7ED 2003 WAGONS, COACHES AND VANS - DRAW GEAR - STANDARDISATION
    EN 14531-1:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
    EN 15612:2008+A1:2010 Railway applications - Braking - Brake pipe accelerator valve
    EN 15624:2008+A1:2010 Railway applications - Braking - Empty-loaded changeover devices
    UIC 515-1 : 2ED 2003 PASSENGER ROLLING STOCK - TRAILER BOGIES - RUNNING GEAR - GENERAL PROVISIONS APPLICABLE TO THE COMPONENTS OF TRAILERS BOGIES
    EN 14067-4:2013 Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track
    EN 50121-3-2:2016 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
    EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
    UIC 541-5 : 4ED 2005 BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO)
    EN 15551:2017 Railway applications - Railway rolling stock - Buffers
    EN 13715:2006+A1:2010 Railway applications - Wheelsets and bogies - Wheels - Tread profile
    EN 15877-1:2012 Railway applications - Marking on railway vehicles - Part 1: Freight wagons
    EN 50153 : 2014 AMD 1 2017 RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
    EN 15839:2012+A1:2015 Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces
    EN 15153-2:2013 Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns
    EN 14535-2:2011 Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
    EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
    EN 15877-2:2013 Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines
    EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
    EN 15220:2016 (edition 2) Railway applications - Brake indicators
    PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 14535-1:2005+A1:2011 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
    UIC 512 : 1979 AMD 2 ROLLING STOCK - CONDITIONS TO BE FULFILLED IN ORDER TO AVOID DIFFICULTIES IN THE OPERATION OF TRACK CIRCUITS AND TREADLES
    EN 15329:2015 Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
    EN 15273-2:2013+A1:2016 Railway applications - Gauges - Part 2: Rolling stock gauge
    PREN 15746-1 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
    EN 15152:2007 Railway applications - Front windscreens for train cabs
    EN 15273-1:2013+A1:2016/AC:2017 RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK
    ISO 8573-1:2010 Compressed air Part 1: Contaminants and purity classes
    EN 15807:2011 Railway applications - Pneumatic half couplings
    EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
    EN 15179:2007 Railway applications - Braking - Requirements for the brake system of coaches
    EN 15227:2008+A1:2010 Railway applications - Crashworthiness requirements for railway vehicle bodies
    EN 14813-1:2006+A1:2010 Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters
    EN 50125-1:2014 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
    EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling
    EN 14531-2:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles
    EN 14601:2005+A1:2010 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
    EN 16116-2:2013 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
    EN 286-4:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
    EN 13104:2009+A2:2012 Railway applications - Wheelsets and bogies - Powered axles - Design method
    UIC 541-03 : 2ED 2015 BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER
    PREN 15746-4 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
    EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
    EN 50121-3-1:2017 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
    EN 15528:2015 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
    EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
    EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
    EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
    EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
    EN 15153-1 : 2013 COR 2016 RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 1: HEAD, MARKER AND TAIL LAMPS
    EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements
    EN 14067-6:2010 Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
    EN 16404:2016 Railway applications - Re-railing and recovery requirements for railway vehicles
    EN 16207:2014 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
    EN 15663:2017 Railway applications - Vehicle reference masses
    EN 15625:2008+A1:2010 Railway applications - Braking - Automatic variable load sensing devices
    EN 13260:2009+A1:2010 Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
    PREN 15746-3 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 3: TECHNICAL REQUIREMENTS FOR RUNNING
    EN 15806:2010 Railway applications - Braking - Static brake testing
    EN 12663-1:2010+A1:2014 Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
    EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    UIC 651 : 4ED 2002 LAYOUT OF DRIVER'S CABS IN LOCOMOTIVES, RAILCARS, MULTIPLE-UNIT TRAINS AND DRIVING TRAILERS
    EN 50238-1 : 2003 COR 2014 RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL
    EN 13103:2009+A2:2012 Railway applications - Wheelsets and bogies - Non powered axles - Design method
    EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
    EN ISO 7010 : 2012 AMD 7 2017 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
    EN 13979-1:2003+A2:2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels
    EN 12663-2:2010 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
    EN 13749:2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
    UIC 541-1 : 8ED 2013 BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS
    EN 15827:2011 Railway applications - Requirements for bogies and running gears
    EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
    EN 15355:2008+A1:2010 Railway applications - Braking - Distributor valves and distributor-isolating devices
    UIC 544-1 : 6ED 2014 BRAKES - BRAKING PERFORMANCE
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective