Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 61800-4:2003

    Current The latest, up-to-date edition.

    ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2003

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Definitions
       3.1 System
       3.2 PDS input parameters
       3.3 Converter
       3.4 PDS output parameters
       3.5 Control
       3.6 Tests
       3.7 Symbols
    4 Overview of drive system topologies
       4.1 Topologies classification
       4.2 Converter configuration
       4.3 Motor type
       4.4 By-pass and redundant configurations
       4.5 Regenerative and dynamic braking
    5 Service conditions
       5.1 Installation and operation
       5.2 Transportation
       5.3 Storage of equipment
    6 Ratings
       6.1 Power drive system (PDS)
       6.2 Converter
       6.3 Transformer
       6.4 Motor
    7 Control performance requirements
       7.1 Steady state performance
       7.2 Dynamic performance
       7.3 Process control interface performance
    8 PDS main components
       8.1 Responsibilities
       8.2 Transformer
       8.3 Converter and associated controls
       8.4 Motor
    9 PDS integration requirements
       9.1 General conditions
       9.2 Integration of components with voltages above
            1000 V
       9.3 Protection interface
       9.4 Driven equipment interface
    10 Tests
       10.1 Performance of tests
       10.2 Items of individual PDS component tests
       10.3 Drive system tests
    11 Efficiency determination
       11.1 General
       11.2 Segregated loss method
       11.3 Full load system test
    Annex A (informative) Most commonly used drive system
            topologies
       A.1 Object
       A.2 Drive system topologies with indirect converters
       A.3 Drive system topologies with direct converters
    Annex B (informative) Speed control performance and the
            mechanical system
       B.1 General
       B.2 Basic speed control types
       B.3 Effect of torsion elasticity on speed control
            performance
       B.4 Effects of backlash
       B.5 Selection criteria for the speed control system
       B.6 Specification of the speed control performance
    Annex C (informative) Power semiconductor losses
       C.1 Thyristor
       C.2 GTO/GCT thyristor (gate turn-off, gate commutated
            turn-off)
       C.3 IGBT
       C.4 Snubber losses

    Abstract - (Show below) - (Hide below)

    Applies to adjustable speed a.c. drive systems that include power conversion, control equipment and a motor.

    General Product Information - (Show below) - (Hide below)

    Development Note For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60050-351:2013 International Electrotechnical Vocabulary (IEV) - Part 351: Control technology
    IEC 61800-3:2017 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    IEC 60038:2009 IEC standard voltages
    IEC 61800-2:2015 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
    IEC 60146-1-3:1991 Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
    IEC TR 60146-6:1992 Semiconductor convertors - Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses
    EN 60721-3-1:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 1: Storage
    IEC 61000-2-4:2002 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
    EN 60146-1-1:2010 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
    IEC 60034-9:2003+AMD1:2007 CSV Rotating electrical machines - Part 9: Noise limits
    EN ISO 1680:2013 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
    EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
    EN 60034-18-31 : 2012 ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES (IEC 60034-18-31:2012)
    IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    EN 60076-5:2006 Power transformers - Part 5: Ability to withstand short-circuit
    EN 61000-2-4:2002/AC:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
    HD 625.1 : 200S1 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS
    IEC 60034-2A:1974 Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction vehicles) - Measurement of losses by the calorimetric method
    IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
    EN 60417-1:2002 GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: OVERVIEW AND APPLICATION
    IEC 60076-5:2006 Power transformers - Part 5: Ability to withstand short circuit
    EN 61000-4-7:2002/A1:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO (IEC 61000-4-7:2002/A1:2008)
    EN 60034-7:1993/A1:2001 ROTATING ELECTRICAL MACHINES - PART 7: CLASSIFICATION OF TYPES OF CONSTRUCTION, MOUNTING ARRANGEMENTS AND TERMINAL BOX POSITION (IM CODE)
    IEC 60050-551:1998 International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics
    ISO 1680:2013 Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
    HD 472 S1:1989/AC:2013 NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
    EN 60417-2:1999 Graphical symbols for use on equipment - Part 2: Symbol originals
    IEC 61136-1:1992 Semiconductor power convertors - Adjustable speed electric drive systems - General requirements - Part 1: Rating specifications, particularly for d.c. motor drives
    EN 60034-14:2004/A1:2007 ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY
    EN 60034-9:2005/A1:2007 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
    IEC 60076-8:1997 Power transformers - Part 8: Application guide
    EN 60146-1-3:1993 Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
    EN 61136-1 : 1995 SEMICONDUCTOR POWER CONVECTORS - ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS, PARTICULARLY FOR D.C. MOTOR DRIVES
    IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
    IEC 60076-3:2013 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
    EN 61800-2:2015 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60076-1:2011 Power transformers - Part 1: General
    IEC 60034-14:2003+AMD1:2007 CSV Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
    IEC 60146-2:1999 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters
    IEC 60721-3-2:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
    EN 60146-2:2000 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters
    EN 60076-1:2011 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    IEC 60034-2:1972 Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)
    EN 60204-11:2000/corrigendum:2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
    IEC 61000-4-7:2002+AMD1:2008 CSV Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
    IEC 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
    EN 61800-3 : 2004 AMD 1 2012 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
    IEC 60034-18-31:2012 Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
    IEC 60050-111:1996 International Electrotechnical Vocabulary (IEV) - Part 111: Physics and chemistry
    EN 60034-2:1996/A2:1996 ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES)
    EN 60721-3-2:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    EN 61378-1:2011 Convertor transformers - Part 1: Transformers for industrial applications
    EN 60034-6:1993 Rotating electrical machines - Part 6: Methods of cooling (IC Code)
    EN 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
    EN 60726:2003 Dry-type power transformers
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 61378-1:2011 Converter transformers - Part 1: Transformers for industrial applications
    EN 60034-5:2001/A1:2007 ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
    IEC 60721-3-1:1997 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage
    EN 60721-3-3 : 95 AMD 2 97 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective