Skip to content
Please enter a keyword to search

  • IEC 60216-4-1:2006

    Current The latest, up-to-date edition.

    Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  19-01-2006

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Constructional requirements
      4.1 General
      4.2 Mechanical requirements
      4.3 Ventilation
      4.4 Specimen mounting arrangements
      4.5 Temperature control and indicator systems
    5 Performance requirements
      5.1 Temperature
      5.2 Temperature difference and temperature fluctuation
      5.3 Temperature variation
      5.4 Maximum temperature deviation
      5.5 Rate of ventilation
      5.6 Exposure volume
      5.7 Time constant
    6 Test methods and procedure
      6.1 General
      6.2 Exposure volume
      6.3 Temperature and related parameters
      6.4 Rate of ventilation
      6.5 Time constant
    7 Report
    8 Conditions of use and instructions for in-service
      monitoring by the user
      8.1 Conditions of use
      8.2 Procedure
      8.3 In-service monitoring
    Annex A (informative) Test method to determine the rate
                          of ventilation
    Annex B (informative) Examples for calculation of
                          temperature deviation
    Bibliography

    Abstract - (Show below) - (Hide below)

    Covers minimum requirements for ventilated and electrically heated single-chamber ovens, with or without forced gas circulation, for thermal endurance evaluation of electrical insulation. It covers ovens designed to operate over all or part of the temperature range from 20 °C above ambient to 500 °C. It gives acceptance tests and in-service monitoring tests for these ageing ovens.The main changes with regard to the previous edition is that this edition adapts IEC 60216-4-1 to the technical content and the editorial form of IEC 60216-4-2 and IEC 60216-4-3. In addition, errors and omissions in the third edition have been corrected.

    General Product Information - (Show below) - (Hide below)

    Committee TC 112
    Development Note Also numbered as BS 5691-4.1(1995) (08/2005) Stability Date: 2022. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    09/30212082 DC : 0
    13/30292436 DC : 0 BS EN 62631-3-3 - GUIDELINES FOR THE DETERMINATION OF DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE
    BS 2782-1.135(1993) : 1993 AMD 10349 METHODS OF TEST PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
    BS EN 62631-3-3 : 2016 COR 2016 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE (IEC 62631-3-3:2015)
    PREN 62275 : DRAFT 2014 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS (IEC 62275:2013, MODIFIED)
    08/30176298 DC : DRAFT JAN 2008 BS EN 62477-1 - SAFETY REQUIREMENTS FOR POWER SEMICONDUCTOR CONVERTER SYSTEMS - PART 1: GENERAL
    BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties Ageing procedures and evaluation of test results
    08/30186166 DC : DRAFT JULY 2008 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
    03/306455 DC : DRAFT APR 2003 IEC 61857-1 ED.2.0 - ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE
    08/30177750 DC : DRAFT FEB 2008 BS EN 61857-1 - ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE
    BIS IS 8504-5-2 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: AGEING OVENS - SECTION 2: PRECISION OVENS FOR USE UP TO 300 DEGREES C
    I.S. EN 62109-1:2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
    I.S. EN 60034-18-31:2012 ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES (IEC 60034-18-31:2012 (EQV))
    NF EN 62329-2 : 2006 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
    BS EN 60695-10-2:2014 Fire hazard testing Abnormal heat. Ball pressure test method
    I.S. EN 60626-2:2009 COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
    NF EN 62275 : 2015 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
    I.S. EN 62329-2:2006 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
    CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
    BS EN 62477-1 : 2012 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
    EN 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    EN 60626-2:2009 Combined flexible materials for electrical insulation - Part 2: Methods of test
    EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
    EN 60034-18-31 : 2012 ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES (IEC 60034-18-31:2012)
    EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    EN 62631-3-3:2016 Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance
    I.S. EN 62631-3-3:2016 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE
    BIS IS 8504-5-3 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: AGEING OVENS - SECTION 3: MULTI-CHAMBER OVENS
    BS EN 62282-5-1:2012 Fuel cell technologies Portable fuel cell power systems. Safety
    PD IEC/TS 62332-3:2016 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Hermetic motor-compressors
    14/30267388 DC : 0 BS EN 62677-2 ED 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
    DIN IEC 60085 : 1993 THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
    EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
    14/30310323 DC : 0 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
    BS EN 60216-4-3:2000 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties Ageing ovens. Multi-chamber ovens
    05/30102442 DC : DRAFT JAN 2005 ISO 6722 - ROAD VEHICLES - 60 V AND 600 V SINGLE CORE CABLES - DIMENSIONS, TEST METHODS AND REQUIREMENTS
    05/30103531 DC : DRAFT AUG 2005
    BS EN 60216-6:2006 Electrical insulating materials. Thermal endurance properties Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    BS EN 61857-1:2009 Electrical insulation systems. Procedures for thermal evaluation General requirements. Low-voltage
    I.S. EN 62477-1:2012 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL
    NF EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
    CEI EN 60216-4-2 : 2001 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 4-2: AGEING OVENS - PRECISION OVENS FOR USE UP TO 300 DEGREES CELSIUS
    EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods
    I.S. EN 62788-1-5:2016 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS
    I.S. EN IEC 62677-2:2018 HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
    CEI EN 61857-1 : 2010 ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE
    I.S. EN 60695-10-3:2016 FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
    I.S. EN 60212:2011 STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
    CEI EN 60695-10-2 : 2015 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
    UNE-EN 62788-1-5:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions
    NF EN 60950-1 : 2006 AMD 2 2014 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    I.S. EN 62275:2015 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
    I.S. EN 61857-1:2009 ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE
    IEC TS 62332-3:2016 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors
    IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
    03/106712 DC : 0 IEC 62326-3 ED.1.0 - PRINTED BOARDS - PART 3: SAFETY CERTIFICATION OF RIGID PRINTED CIRCUIT BOARDS FOR ELECTRONIC ASSEMBLIES
    IEC 60216-4-2:2000 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
    VDE 0304-24-2 : 2001 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 4-2: AGEING OVENS - PRECISION OVENS FOR USE UP TO 300 DEGREE C
    BIS IS 13252-1 : 2010 AMD 1 2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
    VDE 0304-24-3 : 2001 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 4-3: AGEING OVENS - MULTI-CHAMBER OVENS
    DIN EN 60216-4-2 : 2001 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 4-2: AGEING OVENS - PRECISION OVENS FOR USE UP TO 300 DEGREES C
    BS 5691-1:1995 Guide for the determination of thermal endurance properties of electrical insulating materials General guidelines for ageing procedures and evaluation of test results
    BIS IS 13252 : 2003 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS
    CEI EN 62329-2 : 2007 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
    BS EN 60034-18-31:2012 Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines
    14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
    BS EN 60216-8:2013 Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics using simplified procedures
    UNE-EN 60695-10-3:2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
    08/30176905 DC : DRAFT JAN 2008 BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
    12/30230305 DC : 0 BS EN 60695-10-2 ED 3.0 - FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST
    15/30330425 DC : 0 BS EN 60370 ED 2.0 - TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS
    BS 3G 198-3:1994 Sleeves for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding, insulation and identification
    BS ISO 6722:2006 Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements
    BS EN 60684-2:2011 Flexible insulating sleeving Methods of test
    BS EN 62329-2:2006 Heat shrinkable moulded shapes Methods of test
    BS EN 60695-10-3:2016 Fire hazard testing Abnormal heat. Mould stress relief distortion test
    EN IEC 60370:2018 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods
    UNE-EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
    IEC TS 62332-2:2014 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test
    NF EN 60216-6 : 2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    CEI EN 62275 : 2016 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
    I.S. EN 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
    I.S. EN IEC 62631-2-1:2018 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0,1 HZ TO 10 MHZ) - AC METHODS
    CEI EN 60695-10-3 : 2004 FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
    CEI EN 60626-2 : 2012 COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
    CEI EN 60034-18-31 : 2013 ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES
    ASTM D 5374 : 2013 : REDLINE Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
    BS EN 62275:2015 Cable management systems. Cable ties for electrical installations
    IEC 60034-18-22:2000 Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions
    EN 62275:2015 Cable management systems - Cable ties for electrical installations
    IEC 60076-12:2008 Power transformers - Part 12: Loading guide for dry-type power transformers
    IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods
    IEC 62329-2:2006 Heat-shrinkable moulded shapes - Part 2: Methods of test
    IEC 62631-3-3:2015 Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance
    IEC 60216-8:2013 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures
    UNE-EN 62109-1:2011 Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
    IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
    UNE-EN 62275:2016 Cable management systems - Cable ties for electrical installations
    C22.2 NO. 18.5-13 (R2018) Positioning devices (Bi-national standard, with UL 1565)
    CSA C22.2 No. 18.5:2013 POSITIONING DEVICES
    EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
    I.S. EN 60684-2:2011 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
    BS IEC 60695-10.2 : 1995 FIRE HAZARD TESTING - GUIDANCE AND TEST METHODS FOR THE MINIMIZATION OF THE EFFECTS OF ABNORMAL HEAT ON ELECTROTECHNICAL PRODUCTS INVOLVED IN FIRES - METHOD FOR TESTING PRODUCTS MADE FROM NON-METALLIC MATERIALS FOR RESISTANCE TO HEAT USING THE BALL PRESSURE TEST
    05/30128627 DC : DRAFT FEB 2005 IEC 60216-6 ED.2 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    11/30246689 DC : 0 BS EN 60216-8 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES
    CEI EN 62788-1-5 : 1ED 2017 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS
    07/30175250 DC : DRAFT DEC 2007 BS EN 60626-2 ED.3 - COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
    12/30263544 DC : 0 BS EN 60216-1 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
    BS EN 62788-1-5:2016 Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions
    ISO 6722:2006 Road vehicles 60 V and 600 V single-core cables Dimensions, test methods and requirements
    CEI EN 60216-6 : 2007 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    PD IEC/TS 62332-2:2014 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test
    BS EN 60216-4-2:2001 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties Precision ovens for use up to 300°C
    CSA E61347.1 : 2003 : R2013 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
    IEC TR 62392:2006 Suitability of typical electrical insulating material (EIM) for polymer recycling
    BIS IS 8504-1 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
    BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
    CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
    BS IEC 62275:2006 Cable management systems. Cable ties for electrical installations
    I.S. EN 60216-6:2004 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    CEI EN 60216-1 : 2014 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
    UNE-EN 60034-18-31:2013 Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
    IEC 62677-2:2017 Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test
    IEC 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
    BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
    ISO 2578:1993 Plastics Determination of time-temperature limits after prolonged exposure to heat
    IEC 61857-1:2008 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
    IEC 62477-1:2012+AMD1:2016 CSV Safety requirements for power electronic converter systems and equipment - Part 1: General
    BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems General requirements
    IEC 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
    UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
    IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
    IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
    IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    IEC 60212:2010 Standard conditions for use prior to and during the testing of solid electrical insulating materials
    10/30173705 DC : DRAFT SEP 2010 BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
    IEC 62275:2013 Cable management systems - Cable ties for electrical installations
    IEC 60034-18-31:2012 Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
    IEC 60626-2:2009 Combined flexible materials for electrical insulation - Part 2: Methods of test
    EN 62109-1 : 2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
    EN ISO 2578 : 1998 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
    I.S. EN 60216-1:2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS (IEC 60216-1:2013 (EQV))
    ASTM D 5423 : 2014 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
    09/30211895 DC : 0 BS EN 60212 - STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
    BS EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials
    EN 62788-1-5:2016/AC:2017-11 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS (IEC 62788-1-5:2016/COR1:2017)
    CEI EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
    15/30323694 DC : 0 BS EN 62631-2-1 - DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0.1 HZ - 10 MHZ), AC METHODS
    11/30253944 DC : 0 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
    CEI EN 60212 : 2012 STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
    CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
    CSA E61347.1 :2003 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
    15/30289583 DC : 0 BS EN 62788-1-5 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS
    CSA C22.2 No. 62109-1 : 2016 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
    CEI EN 60216-8 : 2014 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES
    I.S. EN IEC 60370:2018 TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS
    BS EN IEC 60370:2018 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes. Electric breakdown methods
    I.S. EN 60216-8:2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES (IEC 60216-8:2013 (EQV))
    NF EN 61857-1 : 2009 ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE
    I.S. EN 60216-4-2:2000 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 4-2: AGEING OVENS - PRECISION OVENS FOR USE UP TO 300 DEGREE C
    IEC 60370:2017 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods
    EN 62477-1:2012/A1:2017 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016)
    07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
    IEC 62109-1:2010 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
    16/30354067 DC : 0 BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
    03/314451 DC : DRAFT SEP 2003 IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING
    EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
    EN 62329-2:2006 Heat shrinkable moulded shapes - Part 2: Methods of test
    EN 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
    EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials
    EN 60216-8:2013 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures
    EN 61857-1:2009 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
    EN 60216-4-2:2000 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
    EN 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    IEC 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    IEC 60216-4-2:2000 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
    IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
    IEC 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
    IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
    IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective