NF EN 1434-2 : 2016
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
17/30363953 DC : 0
|
BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
02/124462 DC : DRAFT DEC 2002
|
BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
BS EN 60068-3-7:2002
|
Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load) |
12/30261215 DC : 0
|
BS EN 13060 - SMALL STEAM STERILIZERS |
15/30291038 DC : 0
|
BS ISO 19291 - TESTING OF LUBRICANTS - TRIBOLOGICAL TEST IN THE TRANSLATORY OSCILLATION APPARATUS - DETERMINATION OF TRIBOLOGICAL QUANTITIES FOR OILS AND GREASES IN THE TRANSLATORY OSCILLATION APPARATUS |
CSA C900.5 : 2013
|
HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
NF EN 1434-4 : 2016
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
16/30312922 DC : 0
|
BS ISO 18888 - GAS TURBINE COMBINED CYCLE POWER PLANTS THERMAL PERFORMANCE TESTS |
14/30291768 DC : 0
|
BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
I.S. EN 61987-1:2007
|
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
PD ISO/TR 9464:2008
|
Guidelines for the use of ISO 5167:2003 |
14/30291756 DC : 0
|
BS EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
BS EN 60068-3-6:2002
|
Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers |
PREN 14180 : DRAFT 2012
|
STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
IEC 60350-2:2017
|
Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
BS ISO 4625-1 : 2004 AMD 16196
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
16/30312501 DC : 0
|
BS ISO 19618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MEASUREMENT METHOD FOR NORMAL SPECTRAL EMISSIVITY USING BLACKBODY REFERENCE WITH AN FTIR SPECTROMETER |
IP 527 : 2015
|
PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF LOW-TEMPERATURE CONE PENETRATION OF LUBRICATING GREASES |
PREN 285 : DRAFT 2013
|
STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
AAMI ISO 11140-4 : 2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
CEI EN 60068-3-7 : 2002
|
ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD) |
BS ISO 13737:2004
|
Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination of low-temperature cone penetration of lubricating greases |
EN 60350-2:2018
|
Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
PREN 13060 : DRAFT 2012
|
SMALL STEAM STERILIZERS |
UNE-EN 12405-1:2006
|
Gas meters - Conversion devices - Part 1: Volume conversion |
IEEE 3004.8-2016
|
IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
ONORM EN ISO 18472 : 2006
|
STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
I.S. EN ISO 15970:2014
|
NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
OIML R 75-1 : 2002
|
HEAT METERS - PART 1: GENERAL REQUIREMENTS |
ISO 6182-1:2014
|
Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers |
NF EN 60947-8 : 2003 AMD 2 2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES |
I.S. EN 1434-4:2015
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
ISO 19291:2016
|
Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus |
BS EN 1434-1 : 2015
|
HEAT METERS - PART 1: GENERAL REQUIREMENTS |
NF EN 60068-3-6 : 2002
|
ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
ASTM D 5771 : 2017 : REDLINE
|
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method) |
EN 285:2015
|
Sterilization - Steam sterilizers - Large sterilizers |
DIN EN ISO 11140-4:2007-07
|
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
BS EN 12952-15:2003
|
Water-tube boilers and auxiliary installations Acceptance tests |
PD CEN/TR 15177:2006
|
Testing the freeze-thaw resistance of concrete. Internal structural damage |
BS EN ISO 4625-1:2006
|
Binders for paint and varnishes. Determination of softening point Ring-and-ball method |
IEC 60068-3-5:2018 RLV
|
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
EN 12953-11:2003
|
Shell boilers - Part 11: Acceptance tests |
IEC 60068-3-6:2018 RLV
|
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
EN 12259-1:1999 + A1:2001/A3:2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 1: SPRINKLERS |
EN 60947-8:2003/A2:2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011) |
EN 12599:2012
|
Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
NF EN 285 : 2016
|
STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
CEN/TR 15177:2006
|
Testing the freeze-thaw resistance of concrete - Internal structural damage |
CEN/TS 12390-9:2016
|
Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
DIN EN 14705:2005-10
|
Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers; German version EN 14705:2005 |
EN 60068-3-6:2002
|
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers |
ASME BPE : 2016
|
BIOPROCESSING EQUIPMENT |
BS EN ISO 2592:2017
|
Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
12/30248648 DC : DRAFT AUG 2012
|
BS EN 16442 - CONTROLLED ENVIRONMENT STORAGE CABINET FOR DISINFECTED THERMOLABILE ENDOSCOPES |
PREN 416 : DRAFT 2017
|
GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
12/30262894 DC : 0
|
BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
16/30339586 DC : 0
|
BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
I.S. EN 11140-4:2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
99/124125 DC : DRAFT NOV 1999
|
BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS |
BS EN 16242:2012
|
Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
02/121895 DC : DRAFT APR 2002
|
BS EN 13060 - SMALL STEAM STERILIZERS |
14/30291759 DC : 0
|
BS EN 1434-5 - HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
PREN 17175 : DRAFT 2017
|
GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
17/30309582 DC : 0
|
BS EN 60350-2 ED 2.0 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
DIN EN ISO 18472:2006-10
|
STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
DIN EN ISO 15970:2014-09
|
NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
06/30160085 DC : 0
|
BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
BS EN 60534-2-3:2016
|
Industrial-process control valves Flow capacity. Test procedures |
BS ISO 17714:2007
|
Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
AAMI ISO 11140-5 : 2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
PREN 12599 : DRAFT 2010
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
17/30363956 DC : 0
|
BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
ASTM E 3137/E3137M : 2017
|
Standard Specification for Heat Meter Instrumentation |
AAMI ISO 11140-4 : 2007 : R2012
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
NF EN 16442 : 2015
|
CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
UNE-EN 12405-3:2016
|
Gas meters - Conversion devices - Part 3: Flow computer |
ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
OIML R 84 : 2003
|
PLATINUM, COPPER, AND NICKEL RESISTANCE THERMOMETERS (FOR INDUSTRIAL AND COMMERCIAL USE) |
I.S. EN ISO 2592:2017
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
BS EN 12405-1 : 2005
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
BS EN 1434-2 : 2015
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
I.S. EN 60068-3-5:2002
|
ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
BS EN ISO 18472:2006
|
Sterilization of health care products. Biological and chemical indicators. Test equipment and methods |
EN ISO 18472:2006
|
Sterilization of health care products - Biological and chemical indicators - Test equipment (ISO 18472:2006) |
I.S. EN 60068-3-7:2002
|
ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND B (WITH LOAD) |
I.S. EN IEC 60068-3-5:2018
|
ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 1434-1:2015
|
HEAT METERS - PART 1: GENERAL REQUIREMENTS |
EN 1434-2:2015
|
Heat meters - Part 2: Constructional requirements |
EN IEC 60068-3-6:2018/AC:2018-05
|
ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
UNE-EN 1434-4:2016
|
Heat meters - Part 4: Pattern approval tests |
AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
OIML R 75-2 : 2002
|
HEAT METERS - PART 2: TYPE APPROVAL TESTS AND INITIAL VERIFICATION TESTS |
IEC 60068-3-5 REDLINE : 2.0
|
ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
BS 2000-34(2016) : 2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
EN ISO 2592:2017
|
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
PREN 17066-1 : DRAFT 2016
|
INSULATED MEANS OF TRANSPORT FOR TEMPERATURE SENSITIVE GOODS - REQUIREMENTS AND TESTING - PART 1: CONTAINER |
IEC 60737:2010
|
Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods |
UNE-EN 1434-2:2016
|
Heat meters - Part 2: Constructional requirements |
IEC PAS 61987-1:2002
|
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
I.S. EN 60947-8:2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV)) |
DIN EN 15758 E : 2010
|
CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
DIN EN 16242:2013-03
|
CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
DIN EN 14597:2015-02
|
TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
DIN EN 15758:2010-12
|
Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects |
BS EN 12599:2012
|
Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
DIN EN 1434-4:2019-08
|
Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
I.S. EN 14597:2012
|
TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
I.S. EN 16242:2012
|
CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
I.S. EN 12599:2012
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
I.S. EN ISO 4892-1:2016
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
DIN EN 14180:2003-10
|
STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
I.S. EN 14180:2014
|
STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
I.S. EN ISO 2719:2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
I.S. EN ISO 3679:2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
DIN EN ISO 4625-1:2006-04
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
VDI 3786 Blatt 3:2012-10
|
Environmental meteorology - Meteorologial measurements - Air temperature |
VDI/VDE 3512 Blatt 2:2017-03
|
Temperature measurement for building automation - Temperature sensors, temperature sensing elements and their measurement parameters |
VDI 3786 Blatt 4:2013-06
|
Environmental meteorology - Meteorological measurements - Air humidity |
VDI/VDE 3512 Blatt 4:2017-03
|
Temperature measurement for building automation - Testing of temperature sensors |
OIML R 140 : 2007
|
MEASURING SYSTEMS FOR GASEOUS FUEL |
BS EN 60350-2 : 2013
|
HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE |
CEI EN 60068-3-5 : 2002
|
ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 285:2015
|
STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
API MPM CH7.3 : 2011(R2016)
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
DIN EN ISO 15970 E : 2014
|
NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
BS ISO 19291:2016
|
Lubricants. Determination of tribological quantities for oils and greases. Tribological test in the translatory oscillation apparatus |
BS IEC 60737:2010
|
Nuclear power plants. Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit). Characteristics and test methods |
ISO 8310:2012
|
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank thermometers on board marine carriers and floating storage |
CEI EN 60068-3-6 : 2002
|
ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
I.S. CEN TR 15177:2006
|
TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE |
BS ISO 19618:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer |
I.S. EN IEC 60068-3-6:2018 COR 2018
|
ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
02/103093 DC : DRAFT APR 2002
|
BS 12390-9 - TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
BS EN ISO 15970:2014
|
Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor |
EN IEC 60068-3-5:2018
|
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
DIN EN 16442 E : 2015
|
CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
NF ISO 14661 : 2000 AMD 1 2004
|
THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
BS 2000-523(2015) : 2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
13/30278676 DC : 0
|
BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
15/30301302 DC : 0
|
BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
07/30170559 DC : DRAFT AUG 2007
|
BS ISO 2314 - GAS TURBINES - ACCEPTANCE TESTS |
04/30124466 DC : DRAFT OCT 2004
|
EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
10/30235574 DC : 0
|
BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
BS ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
BS ISO 11140-5:2007
|
Sterilization of health care products. Chemical indicators Class 2 indicators for Bowie and Dick-type air removal tests |
AAMI ISO 11140-5 : 2007 : R2012
|
STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
BS ISO 15970 : 2008
|
NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
BS EN 60068-3-5:2002
|
Environmental testing. Guidance Confirmation of the performance of temperature chambers |
IEC 60068-3-5:2018
|
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
API MPM CH7.3:2011
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
I.S. EN 12405-3:2015
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
EN 13060:2014
|
Small steam sterilizers |
I.S. EN 12405-1:2005
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
I.S. EN 1434-5:2015
|
HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
PREN 1434-4 : DRAFT 2014
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
AAMI ST15883-1 : 2009
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
NF EN 60068-3-5 : 2002
|
ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
DIN EN 1434-2:2016-02
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
I.S. EN 16442:2015
|
CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
ISO 11140-5:2007
|
Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
API 551 : 2016
|
PROCESS MEASUREMENT |
DIN EN 13060:2015-03
|
SMALL STEAM STERILIZERS |
DIN EN ISO 3679:2015-06
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
DIN EN 12259-1:2006-03
|
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers |
DIN EN 14705 E : 2005
|
HEAT EXCHANGERS - METHOD OF MEASUREMENT AND EVALUATION OF THERMAL PERFORMANCES OF WET COOLING TOWERS |
DIN EN 285:2016-05
|
Sterilization - Steam sterilizers - Large sterilizers |
BS EN 1434-5:2015
|
Heat meters Initial verification tests |
ISO 15883-1:2006
|
Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
IEC 60068-3-7:2001
|
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
EN 60068-3-7:2002
|
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
I.S. EN ISO 4625-1:2006
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
EN ISO 4625-1:2006
|
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
ONORM EN ISO 4625-1 : 2006
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
I.S. EN ISO 15883-1:2009
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
UNI EN 12599 : 2012
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
UNI EN ISO 15883-1 : 2014
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
UNI EN 14597 : 2012
|
TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
UNI EN 14180 : 2014
|
STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
UNI EN 16242 : 2013
|
CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
API MPM CH7.3 SPANISH : 2011
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
12/30244792 DC : 0
|
BS ISO 8310 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK THERMOMETERS ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
BS EN 1434-4 : 2015
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
08/30173520 DC : DRAFT FEB 2008
|
BS EN 15758 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
DIN EN 12405-3:2016-04
|
Gas meters - Conversion devices - Part 3: Flow computer |
PD CEN/TS 12390-9:2016
|
Testing hardened concrete Freeze-thaw resistance with de-icing salts. Scaling |
PREN 17180 : DRAFT 2017
|
STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
BS EN 16442:2015
|
Controlled environment storage cabinet for processed thermolabile endoscopes |
CAN/CSA-ISO 11140-4:18
|
CAN/CSA-ISO 11140-4:18 - Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (Adopted ISO 11140-4:2007, second edition, 2007-03-15) |
CSA C900.2 : 2013
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
BS EN 12405-3:2015
|
Gas meters. Conversion devices Flow computer |
16/30330536 DC : 0
|
BS EN ISO 18472 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
PREN 1434-2 : DRAFT 2014
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
DIN 43735:2011-06
|
PROCESS CONTROL TECHNOLOGY - ELECTRICAL TEMPERATURE SENSORS - REPLACEABLE INSERTS FOR RTDS AND THERMOCOUPLES |
BS EN 60947-8:2003
|
Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines |
04/30112930 DC : DRAFT APR 2004
|
IEC 61987-1 ED.1 - INDUSTRIAL PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
16/30325304 DC : 0
|
BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
14/30295943 DC : 0
|
BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
14/30312597 DC : 0
|
BS EN 62828-3 ED.1 IEC 62828-3 ED.1 - REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 3: SPECIFIC PROCEDURES FOR TEMPERATURE TRANSMITTERS |
PREN 419 : DRAFT 2017
|
GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
BS ISO 2314:2009
|
Gas turbines. Acceptance tests |
UNE-EN ISO 15970:2014
|
Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
EN 1434-4:2015
|
Heat meters - Part 4: Pattern approval tests |
10/30219217 DC : 0
|
BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
DIN EN 12405-3 E : 2016
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
13/30285144 DC : 0
|
BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS EN 61987-1:2007
|
Industrial-process measurement and control. Data structures and elements in process equipment catalogues Measuring equipment with analogue and digital output |
DIN EN 1434-4:2016-02
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
09/30165791 DC : 0
|
BS IEC 60737 - NUCLEAR POWER PLANT - INSTRUMENTATION IMPORTANT TO SAFETY - TEMPERATURE SENSORS (INCORE AND PRIMARY COOLANT CIRCUIT): CHARACTERISTICS AND TEST METHODS |
BS ISO 6487 : 2015
|
ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
DIN EN 16442:2015-05
|
CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
UNI EN 12405-1 : 2010
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
15/30330287 DC : DRAFT AUG 2015
|
BS EN 60068-3-5 - ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 60068-3-6:2002
|
ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
UNE-EN 16442:2015
|
Controlled environment storage cabinet for processed thermolabile endoscopes |
S.R. CEN/TS 12390-9:2016
|
TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE WITH DE-ICING SALTS - SCALING |
ISO 13737:2004
|
Petroleum products and lubricants Determination of low-temperature cone penetration of lubricating greases |
16/30348307 DC : 0
|
BS EN 17066-1 - INSULATED MEANS OF TRANSPORT FOR TEMPERATURE SENSITIVE GOODS - REQUIREMENTS AND TESTING - PART 1: CONTAINER |
17/30363959 DC : 0
|
BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
DIN EN 1434-5:2016-02
|
HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
IEC 60068-3-6 REDLINE : 2.0
|
ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
DIN EN 1434-1:2016-02
|
HEAT METERS - PART 1: GENERAL REQUIREMENTS |
UNE-EN 13060:2015
|
Small steam sterilizers |
ISO/TR 9464:2008
|
Guidelines for the use of ISO 5167:2003 |
ISO 18472:2006
|
Sterilization of health care products Biological and chemical indicators Test equipment |
EN 12405-1:2005+A2:2010
|
Gas meters - Conversion devices - Part 1: Volume conversion |
I.S. EN ISO 18472:2006
|
STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
IEC 60068-3-6:2018
|
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
I.S. CEN TS 12390-9:2006
|
TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
UNE-EN 1434-1:2016
|
Heat meters - Part 1: General requirements |
UNE-EN ISO 15883-1:2009
|
Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
DIN EN 12599:2013-01
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 14597 E : 2015
|
TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
DIN EN 14180:2014-09
|
STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
DIN EN ISO 4892-1:2016-10
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
BS EN ISO 11140-4:2007
|
Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
IEC 61987-1:2006
|
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
IEC 60947-8:2003+AMD1:2006+AMD2:2011 CSV
|
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
BS EN ISO 2719:2002
|
Determination of flash point. Pensky-Martens closed cup method |
BS EN ISO 3679:2015
|
Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
UNE-EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
BS EN 867-4:2001
|
Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
BS EN ISO 4892-1:2016
|
Plastics. Methods of exposure to laboratory light sources General guidance |
ISO 11140-4:2007
|
Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
BS EN 13060 : 2014
|
SMALL STEAM STERILIZERS |
BS EN 285:2015
|
Sterilization. Steam sterilizers. Large sterilizers |
BS EN 14705:2005
|
Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers |
UNE-EN 16242:2014
|
Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
ISO 4625-1:2004
|
Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method |
BS EN 14180:2014
|
Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
ISO 6182-9:2005
|
Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles |
DIN EN 12952-15:2004-01
|
Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
BS EN 14597:2012
|
Temperature control devices and temperature limiters for heat generating systems |
UNE-EN ISO 2719:2017
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 6182-10:2014
|
Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers |
BS EN ISO 15883-1 : 2009
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
BS EN 15758:2010
|
Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
UNE-EN 15758:2011
|
Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method |
UNE-EN ISO 4892-1:2017
|
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
ISO 15970:2008
|
Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor |
EN ISO 4892-1:2016
|
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
EN ISO 15970:2014
|
Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
EN ISO 11140-4:2007
|
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
EN 14597:2012
|
Temperature control devices and temperature limiters for heat generating systems |
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
EN 16242:2012
|
Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
EN 14705:2005
|
Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers |
EN 15758:2010
|
Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
EN 14180:2014
|
Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
EN 16442:2015
|
Controlled environment storage cabinet for processed thermolabile endoscopes |
BS ISO 8310:2012
|
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank thermometers on board marine carriers and floating storage |
PREN 1434-5 : DRAFT 2014
|
HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
DIN ISO 17714:2008-06
|
METEOROLOGY - AIR TEMPERATURE MEASUREMENTS - TEST METHODS FOR COMPARING THE PERFORMANCE OF THERMOMETER SHIELDS/SCREENS AND DEFINING IMPORTANT CHARACTERISTICS |
ISO 18888:2017
|
Gas turbine combined cycle power plants — Thermal performance tests |
DKD-R 5-6 : 2008
|
|
BS 2000-527(2004) : 2004
|
METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-527: PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF LOW-TEMPERATURE CONE PENETRATION OF LUBRICATING GREASES |
I.S. EN 13060:2014
|
SMALL STEAM STERILIZERS |
06/30151216 DC : DRAFT JUN 2006
|
|
07/30127284 DC : 0
|
BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
DD CEN/TS 12390-9:2006
|
Testing hardened concrete Freeze-thaw resistance. Scaling |
BS ISO 18888:2017
|
Gas turbine combined cycle power plants. Thermal performance tests |
CSA C900.4 : 2013
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
ISO 2314:2009
|
Gas turbines — Acceptance tests |
API MPM CH7.5 : 2014
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.5: TEMPERATURE DETERMINATION - AUTOMATIC TANK TEMPERATURE MEASUREMENT ONBOARD MARINE VESSELS CARRYING REFRIGERATED HYDROCARBON AND CHEMICAL GAS FLUIDS |
UNI EN 15758 : 2010
|
CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
UNI EN ISO 15970 : 2014
|
NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
CSA C900.1 : 2013
|
HEAT METERS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 60534-2-3:2016
|
INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES |
ISO 19618:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer |
ISO 17714:2007
|
Meteorology Air temperature measurements Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
EN 1434-1:2015
|
Heat meters - Part 1: General requirements |
AAMI ISO 18472 : 2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
I.S. EN 60350-2:2018
|
HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
I.S. EN 1434-2:2015
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
FD X07 029-1 : 2002 FD
|
METROLOGY - CALIBRATION AND VERIFICATION PROCEDURE FOR THERMOMETERS - PART 1: CALIBRATION AND VERIFICATION PROCEDURE FOR PROBES AND RESISTANCE THERMOMETERS |
CAN/CSA-ISO 11140-5:18
|
CAN/CSA-ISO 11140-5:18 - Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests (Adopted ISO 11140-5:2007, second edition, 2007-03-15) |
EN 1434-5:2015
|
Heat meters - Part 5: Initial verification tests |
UNE-EN 1434-5:2016
|
Heat meters - Part 5: Initial verification tests |
ISO 6487:2015
|
Road vehicles — Measurement techniques in impact tests — Instrumentation |
DIN EN ISO 15883-1:2014-10
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
DIN EN 12405-1:2011-04
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
UNE-EN 285:2016
|
Sterilization - Steam sterilizers - Large sterilizers |
BS EN 12259-1:1999
|
Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers |
BS EN 12953-11:2003
|
Shell boilers Acceptance tests |
UNE-EN 14597:2014
|
Temperature control devices and temperature limiters for heat generating systems |
EN ISO 15883-1:2009/A1:2014
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006/AMD 1:2014) |
NF EN 60068-3-7 : 2002
|
ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND TEST B (WITH LOAD) |
EN 12952-15:2003
|
Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
EN 61987-1:2007
|
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
EN 60068-3-5:2002
|
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
EN 60534-2-3:2016
|
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
EN 12405-3 : 2015
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
DIN EN ISO 4892-1:2001-09
|
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
UNE-EN 60350-2:2014
|
Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |