Skip to content
Please enter a keyword to search

  • IEC 61000-2-2:2002+AMD1:2017 CSV

    Current The latest, up-to-date edition.

    Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  27-06-2017

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    IEC 61000-2-2:2002+A1:2017 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. It gives compatibility levels for public low voltage a.c. distribution systems having a nominal voltage up to 420 V, single-phase or 690 V, three-phase and a nominal frequency of 50 Hz or 60 Hz. Compatibility levels are specified for electromagnetic disturbances of the types which can be expected in public low voltage power supply systems, for guidance in: - the limits to be set for disturbance emission into public power supply systems; - the immunity limits to be set by product committees and others for the equipment exposed to the conducted disturbances present in public power supply systems. This consolidated version consists of the second edition (2002) and its amendment 1 (2017). Therefore, no need to order amendment in addition to this publication.

    General Product Information - (Show below) - (Hide below)

    Committee TC 77/SC 77A
    Development Note Stability Date: 2018. (05/2018)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    EN 61000-4-30:2015/AC:2017-01 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016)
    CLC/TS 50217:2005 Guide for in situ measurements - In situ measurement of disturbance emission
    12/30266709 DC : 0 BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    95/210789 DC : DRAFT AUG 1995 IEC 61000-5-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5: MITIGATION METHODS AND INSTALLATION GUIDELINES - SECTION 6: MITIGATION OF EXTERNAL INFLUENCES - TECHNICAL REPORT TYPE 2
    BS IEC 62003:2009 Nuclear power plants. Instrumentation and control important to safety. Requirements for electromagnetic compatibility testing
    09/30186728 DC : 0 BS EN 62040-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
    NF EN 60931-1 : 97 AMD 1 2003 SHUNT POWER CAPACITORS OF THE NON-SELF HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    10/30219053 DC : 0 BS EN 50130-4 - ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
    09/30214359 DC : 0 BS EN 50533 - RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
    PD IEC/TR 61000-3-13:2008 Electromagnetic compatibility (EMC) Limits. Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
    BS EN 62040-5-3:2017 Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
    UNE-EN 61000-4-30:2015 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
    12/30262567 DC : 0 BS EN 61000-4-30 ED 3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    BS EN 50091-1:1993 General and safety requirementsSpecification for uninterruptible power systems (UPS)
    BS EN 61000-2-12:2003 Electromagnetic compatibility (EMC). Environment Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
    09/30214220 DC : 0 BS IEC TR 61000-2-5 ED - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
    BS EN 50533 : 2011 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
    IEC TR 61000-2-1:1990 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
    BS EN 61642:1998 Industrial a.c. networks affected by harmonics. Application of filters and shunt capacitors
    14/30298027 DC : 0 BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
    BS EN 60831-1:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V General. Performance, testing and rating. Safety requirements. Guide for installation and operation
    BS EN 61000-4-30:2015 Electromagnetic compatibility (EMC) Testing and measurement techniques. Power quality measurement methods
    97/209093 DC : 0
    08/30183041 DC : DRAFT MAY 2008 BS EN 61000-3-12 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW VOLTAGE SYSTEMS WITH INPUT CURRENT $OG 16 A AND <= 75 A PER PHASE
    PREN 50130-4 : DRAFT 2010 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
    06/30150224 DC : DRAFT MAY 2006 IEC 61000-3-13 TR ED - 1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-13: ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF UNBALANCED INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    PD IEC/TR 61000-2-8:2002 Electromagnetic compatibility (EMC). Environment Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
    CSA C61000.3.7 :2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-7: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF FLUCTUATING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    CSA C61000-3-13 : 2009 : R2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-13: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF UNBALANCED INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    06/30159310 DC : 0 IEC 61000-4-30 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    CSA CEI/IEC 61000.2.4 : 2004 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
    CEI EN 60146-2 : 2001 SEMICONDUCTOR CONVERTERS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTERS INCLUDING DIRECT D.C. CONVERTERS
    CEI EN 61000-3-12 : 2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
    BS EN 62040-1 : 2008 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
    I.S. EN 62040-1-1:2004
    S.R. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    S.R. CLC/TR 50669:2017 INVESTIGATION RESULTS ON ELECTROMAGNETIC INTERFERENCE IN THE FREQUENCY RANGE BELOW 150 KHZ
    I.S. EN 61000-4-13:2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS
    OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
    I.S. EN 61642:1999 INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS
    CEI EN 61000-3-2 : 2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    OIML R 59-1 : 2016 MOISTURE METERS FOR CEREAL GRAINS AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    NF EN 61851-21 : 2002 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY
    NF EN 62310-2 : 2007 STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
    I.S. EN 61000-2-12:2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
    BS EN 61851-21:2002 Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply
    06/30158289 DC : 0 BS EN 62040-1 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
    IEC 62110:2009 Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure
    DEFSTAN 59-411(PT1)/2(2014) : 2014 ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING
    14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
    IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
    IEC 61921:2017 Power capacitors - Low-voltage power factor correction banks
    EN 61000-2-4:2002/AC:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
    EN 61000-4-13:2002/A2:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015)
    CLC/TS 61643-22:2016 Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
    EN 62080:2009/A2:2015 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015)
    EN 61000-3-12:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011)
    EN 60831-1:2014/AC:2014 SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    DIN EN ISO 4064-2:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
    EN 61642:1997 Industrial a.c. networks affected by harmonics - Application of filters and shunt capacitors
    EN 60669-2-5:2016 Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES)
    EN 62310-2:2007 Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements
    EN 61000-2-12:2003 Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
    EN 62040-1-2:2003/corrigendum:2004
    EN 50130-4:2011/A1:2014 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
    EN 50091-2:1995/corrigendum Jan. 1998
    DEFSTAN 59-411(PT1)/1(2007) : 2007 ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING
    NBR IEC 61000-4-30 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENTS TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    I.S. EN 62080:2009 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    CEI EN 61000-2-4 : 2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
    06/30157062 DC : 0 BS EN 62310-3 - STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
    14/30279327 DC : 0 BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
    CSA CEI/IEC 1000.1.1 : 1997(R2018) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1: GENERAL - SECTION 1: APPLICATION AND INTERPRETATION OF FUNDAMENTAL DEFINITIONS AND TERMS
    IEC TR 61000-3-13:2008 Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
    00/244020 DC : DRAFT SEP 2000 IEC 61800-3 ED.2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS
    PD CLC/TS 61643-22:2016 Low-voltage surge protective devices Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
    NF EN 62310-3 : 2008 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
    BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
    CLC/TR 50422:2013 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    PD CLC/TR 50669:2017 Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz
    11/30243422 DC : DRAFT FEB 2011 BS EN 60831-1 - SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    BS EN 61000-4-19:2014 Electromagnetic compatibility (EMC) Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
    DD CLC/TS 50217:2005 Guide for in situ measurements. In situ measurement of disturbance emission
    IEC TR 61000-2-8:2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
    BS IEC 1000-3.6 : 1996 ELECTROMAGNETIC COMPATIBILITY (EMC) - LIMITS - ASSESSMENT OF EMISSION LIMITS FOR DISTORTING LOADS IN MV AND HV POWER SYSTEMS - BASIC EMC PUBLICATION
    BS EN 61800-3 : 2004 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
    NF EN 62040-2 : 2006
    NF EN 61543 : 96 AMD 2 2006 RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY
    BS EN 62040-1-1:2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas
    I.S. EN 61800-3:2005 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
    CEI EN 61851-22 : 2003 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
    IEC TS 62898-1:2017 Microgrids - Part 1: Guidelines for microgrid projects planning and specification
    PD IEC/TS 62257-12-1:2015 Recommendations for renewable energy and hybrid systems for rural electrification Selection of lamps and lighting appliances for off-grid electricity systems
    07/30164322 DC : 0 BS EN 61000-3-6 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: ASSESSMENT OF HARMONIC EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    BS EN 50130-4 : 2011 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
    06/30150602 DC : DRAFT MAY 2006 BS IEC - 61000-4-30 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    CSA IEC 61000-4-7 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
    CAN/CSA-IEC 61000-4-7:13 (R2017) Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Adopted IEC 61000-4-7:2002, edition 2:2002 consolidated with amendment 1:2008) | Compatibilité électromagnétique (CEM) - Partie 4-7: Techniques d\'essai et de mesure - Guide général relatif aux mesures d\'harmoniques et d\'interharmoniques, ainsi qu\'à l\'appareillage de mesure, applicable aux réseaux d\'alimentation et aux appareils qui y sont raccordés (norme CEI 61000-4-7:2002 adoptée, édition 2:2002 consolidée par l\'amendement 1:2008)
    CSA C61000.3.6 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    CEI EN 62040-2 : 2006 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
    CEI EN 61921 : 2004 POWER CAPACITORS - LOW VOLTAGE POWER FACTOR CORRECTION BANKS
    IEC TR 61000-3-6:2008 Electromagnetic compatibility (EMC) - Part 3-6: Limits - Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
    UNE-EN 61000-3-12:2012 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and
    I.S. EN 61000-4-14:1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
    IEC TR 61000-2-5:2017 Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
    IEEE 1453.1-2012 IEEE Guide--Adoption of IEC/TR 61000-3-7:2008, Electromagnetic compatibility (EMC)--Limits--Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
    I.S. EN 61543:1996 RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY
    I.S. EN 62040-5-3:2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
    I.S. CLC TR 50422:2005 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    OIML R 49-2 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    I.S. EN 60831-1:2014 SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    I.S. EN 62110:2009 ELECTRIC AND MAGNETIC FIELD LEVELS GENERATED BY AC POWER SYSTEMS - MEASUREMENT PROCEDURES WITH REGARD TO PUBLIC EXPOSURE
    BIS IS 16242-1 : 2014 AMD 1 2018 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
    IEC 62599-2:2010 Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems
    IEC TR 61000-1-4:2005 Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
    UNE-EN 62080:2010 Sound signalling devices for household and similar purposes
    NF EN 61851-22 : 2002 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C. ELECTRIC VEHICLE CHARGING STATION
    I.S. EN 60146-1-1:2010 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    IEC 62040-2:2016 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    IEC 61643-22:2015 Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
    IEC TR 61000-3-7:2008 Electromagnetic compatibility (EMC) - Part 3-7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
    I.S. EN 62040-1-2:2004
    I.S. EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
    S.R. CLC/TS 50509:2007 USE OF LED SIGNAL HEADS IN ROAD TRAFFIC SIGNAL SYSTEMS
    I.S. EN 62040-1:2008 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008 (EQV))
    17/30354643 DC : 0 BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
    I.S. EN 809:1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    DIN EN 60146-2 : 2001 SEMICONDUCTOR CONVERTORS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTORS INCLUDING DIRECT D.C. CONVERTORS
    VDE 0558-2 : 2001 SEMICONDUCTOR CONVERTORS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTORS INCLUDING DIRECT D.C. CONVERTORS
    ANSI C82.77:2002 American National Standard for Harmonic Emission Limits—Related Power Quality Requirements for Lighting Equipment
    VDE 0560-430 : 1998 INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS
    VDI 3551:2011-01 Electromagnetic compatibility (EMC) in building services
    DIN EN 61642 : 1998 INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS
    11/30217192 DC : 0 BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    97/260469 DC : DRAFT AUG 1997 IEC 61000-3-9 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-9: LIMITS FOR INTERHARMONIC CURRENT EMISSIONS (EQUIPMENT WITH INPUT POWER <= 16 A PER PHASE AND PRONE TO PRODUCE INTERHARMONICS BY DESIGN)
    OIML R 140 : 2007 MEASURING SYSTEMS FOR GASEOUS FUEL
    CSA CEI/IEC 1000.2.1 : 1997(R2018) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2: ENVIRONMENT - SECTION 1: DESCRIPTION OF THE ENVIRONMENT - ELECTROMAGNETIC ENVIRONMENT FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC POWER SUPPLY SYSTEMS
    NF EN 61000-4-13 : 2002 AMD 2 2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS
    BS EN 62110:2009 Electric and magnetic field levels generated by AC power systems. Measurement procedures with regard to public exposure
    06/30150181 DC : DRAFT MAY 2006 IEC 61000-3-7 TR ED.2 - ELECTROMAGNETIC COMPATABILITY (EMC) - PART 3-7: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF FLUCTUATING LOAD INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    BS EN ISO 4064-2:2017 Water meters for cold potable water and hot water Test methods
    BS EN 61000-2-4:2002 Electromagnetic compatibility (EMC). Environment Compatibility levels in industrial plants for low-frequency conducted disturbances
    08/30180966 DC : DRAFT APR 2008 BS EN 50160 - VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC DISTRIBUTION NETWORKS
    CSA CEI/IEC 61000.4.14 : 2001 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
    02/203734 DC : DRAFT MAR 2002 IEC 61000-2-8. ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-8: ENVIRONMENT - VOLTAGE DIPS AND SHORT INTERRUPTIONS ON PUBLIC ELECTRIC POWER SUPPLY SYSTEMS WITH STATISTICAL MEASUREMENT RESULTS
    BS EN 61851-22:2002 Electric vehicle conductive charging system A.C. electric vehicle charging station
    UNI CEI EN ISO 4064-2 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    PD IEC/TR 61000-3-6:2008 Electromagnetic compatibility (EMC) Limits. Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
    EN 61851-21:2002 Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
    03/318812 DC : DRAFT NOV 2003 IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
    DD IEC TS 62257-3 : DRAFT 2004 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
    BS EN 61000-4-7 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
    PD IEC/TS 62257-3:2015 Recommendations for renewable energy and hybrid systems for rural electrification Project development and management
    BS 7484:1991 Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
    IEC 61851-22:2001 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
    BS EN 60146-2:2000 Semiconductor convertors. General requirements and line commutated convertors Self-commutated semiconductor converters including direct d.c. converters
    BS EN 61543:1996 Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
    00/244985 DC : DRAFT OCT 2000 IEC 61000-3-12 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW VOLTAGE SYSTEMS WITH INPUT CURRENT LESS THAN OR EQUAL TO 75 A PER PHASE AND SUBJECT TO RESTRICTED CONNECTION
    NF EN 61000-2-12 : 2004 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
    CSA CEI/IEC 61000.2.8 : 2004 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-8: ENVIRONMENT - VOLTAGE DIPS AND SHORT INTERRUPTIONS ON PUBLIC ELECTRICAL POWER SUPPLY SYSTEMS WITH STATISTICAL MEASUREMENT RESULTS
    CSA C61000-4-30 : 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    16/30332623 DC : 0 BS EN 62920 ED 1.0 - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT APPLYING TO PHOTOVOLTAIC POWER GENERATING SYSTEMS
    00/202085 DC : DRAFT MAY 2000 IEC 60669-2-1. ED. 4 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATION - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
    PD IEC/TR 61000-1-4:2005 Electromagnetic compatibility (EMC) General - Historical rationale for the limitation of power-frequency conducted harmonic current emmissions from equipment, in the frequency range up to 2 kHz
    CSA C61000.3.6 : 2009 : R2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    BS IEC 61000-3.4 : 1998
    EN 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
    DIN EN 50091-1-1 : 1997
    IEEE DRAFT 519.1 : D9A 2004 GUIDE FOR APPLYING HARMONIC LIMITS ON POWER SYSTEMS
    BS EN 50091-2:1996 Specification for uninterruptible power systems (UPS) EMC requirements
    CLC/TS 50509:2007 Use of LED signal heads in road traffic signal systems
    IEC 61000-3-2 : 5.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    EN IEC 62933-2-1:2018 Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
    PD CLC/TR 50422:2013 Guide for the application of the European Standard EN 50160
    I.S. EN 50130-4:2011 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
    BS EN 62040-3:2011 Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
    I.S. CLC/TS 50217:2005 GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
    TR 102 446 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); GENERAL REQUIREMENTS FOR UPS FOR USE IN TELECOMMUNICATION ENVIRONMENT
    PD IEC/TR 61000-2-5:2017 Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments
    I.S. EN IEC 62933-2-1:2018 ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
    S.R. CLC/TS 50549-1:2015 REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 1: CONNECTION TO A LV DISTRIBUTION NETWORK ABOVE 16 A
    I.S. EN 61921:2003 POWER CAPACITORS - LOW VOLTAGE POWER FACTOR CORRECTION BANKS
    OIML R 139 : 2007 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES
    S.R. CLC/TS 61643-22:2016 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 22: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - SELECTION AND APPLICATION PRINCIPLES
    I.S. EN 50091-1:1993 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - GENERAL AND SAFETY REQUIREMENTS
    IEEE 1159-2009 IEEE Recommended Practice for Monitoring Electric Power Quality
    OIML R 126 : 2012 EVIDENTIAL BREATH ANALYZERS
    ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement
    ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
    IEC 60831-1 REDLINE : 3ED 2014 SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    IEC 61921:2017 RLV Power capacitors - Low-voltage power factor correction banks
    IEEE 2030.1.1-2015 IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
    IEC 61000-3-2:2018 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
    IEC 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
    BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    UNE-EN 50160:2011 Voltage characteristics of electricity supplied by public electricity networks
    EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
    UNI EN 809 : 2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    UNE-EN 61000-4-7:2004 Electromagnetic compatibility (EMC) -- Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    03/309760 DC : DRAFT JUNE 2003 IEC 62257-3 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
    08/30175793 DC : DRAFT JAN 2008 BS EN 61000-3-14 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-14: ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTURBING INSTALLATIONS TO LV POWER SYSTEMS
    CEI CLC/TR 50422 : 2015 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    PD IEC/TS 62898-1:2017 Microgrids Guidelines for microgrid projects planning and specification
    08/30185866 DC : DRAFT JULY 2008 BS EN 61000-3-15 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-15: LIMITS - ASSESSMENT OF LOW FREQUENCY ELECTROMAGNETIC IMMUNITY AND EMISSION REQUIREMENTS FOR DISPERSED GENERATION SYSTEMS IN LV NETWORK
    NF EN 50533 : 2012 AMD 1 2018 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
    BS EN 62310-3:2008 Static transfer systems (STS) Method for specifying performance and test requirements
    16/30349357 DC : 0 PD IEC/TS 62898-1 ED1.0 - MICROGRIDS - GUIDELINES FOR MICROGRID PROJECTS PLANNING AND SPECIFICATION
    PD IEC/TR 61000-3-14:2011 Electromagnetic compatibility (EMC) Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems
    96/210385 DC : 0 CLC/BTTF 68-6 (SEC)8 - MEASUREMENT GUIDE FOR VOLTAGE CHARACTERISTICS
    IEC TR 61000-2-5 REDLINE : 3ED 2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - DESCRIPTION AND CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
    BS EN 62310-2:2007 Static transfer systems (STS) Electromagnetic compatibility (EMC) requirements
    PD IEC/TR 61000-3-15:2011 Electromagnetic compatibility (EMC) Limits. Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network
    02/204840 DC : DRAFT APR 2002 PREN 50217 - IN SITU MEASUREMENTS OF DISTURBANCE EMISSION
    NF EN 62080 : 2010 AMD 2 2015 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    14/30292140 DC : 0 BS EN 62040-2 ED3.0 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (EMC)
    16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
    DD CLC/TS 50509:2007 Use of LED signal heads in road traffic signal systems
    UNE-EN ISO 4064-2:2015 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
    BS EN 61921:2003 Power capacitors. Low-voltage power factor correction banks
    UNE-EN 50130-4:2011 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
    97/260470 DC : DRAFT AUG 1997 IEC 61000-4-31 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 31: MEASUREMENTS IN THE FREQUENCY RANGE 2 KHZ TO 9 KHZ - BASIC EMC STANDARD
    I.S. EN 60669-2-5:2016 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
    BS EN 60931-1:1998 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV General. Performance, testing and rating. Safety requirements. Guide for installation and operation
    IEEE 1250-2011 REDLINE IEEE Guide for Identifying and Improving Voltage Quality in Power Systems
    CSA C61000-3-13 : 2009 : R2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-13: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF UNBALANCED INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    CSA C61000-3-13 :2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-13: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF UNBALANCED INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    UNE-EN 61000-4-19:2015 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
    BS ISO 17089-1:2019 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
    BS EN 61000-4-14 : 1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
    I.S. EN 50160:2010 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
    I.S. EN 60146-2:2003 SEMICONDUCTOR CONVERTERS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTERS INCLUDING DIRECT D.C. CONVERTERS
    I.S. EN 62310-2:2007 STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
    I.S. EN 62310-3:2008 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
    I.S. EN ISO 4064-2:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    I.S. EN 50533:2011 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
    DIN EN ISO 4064-2:2016-09 (Draft) WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    BS EN 61000-3-2:2014 Electromagnetic compatibility (EMC) Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
    CSA CEI/IEC 61000.4.30 : 2004 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    I.S. EN 60669-2-1:2004 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
    CEI EN 60146-1-1 : 2013 SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    CEI EN 62310-2 : 2007 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
    IEC 61800-3:2017 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    IEC 62040-1:2017 EXV UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS
    I.S. EN 60931-1:1997 SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AN INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS GUIDE FOR INSTALLATION AND OPERATION
    IEC 62040-2 REDLINE : 3ED 2016 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
    IEC TS 62257-3:2015 Recommendations for renewable energy and hybrid systems for rural electrification - Part 3: Project development and management
    IEC TS 62749:2015 Assessment of power quality - Characteristics of electricity supplied by public networks
    IEC 61921 : 2.0 POWER CAPACITORS - LOW-VOLTAGE POWER FACTOR CORRECTION BANKS
    IEC TR 61000-3-15:2011 Electromagnetic compatibility (EMC) - Part 3-15: Limits - Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network
    IEC 61000-3-2:2018 RLV Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
    IEC TR 61000-3-14:2011 Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems
    IEC 62310-2:2006 Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements
    I.S. EN 62040-2:2006 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
    IEC TS 61000-3-4:1998 Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
    DIN EN 809:2012-10 Pumps and pump units for liquids - Common safety requirements
    12/30266531 DC : 0 BS EN TS 62257-1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 1: GENERAL INTRODUCTION TO RURAL ELECTRIFICATION
    BS EN 50090-2-2 : 1997 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
    IEC 62310-3:2008 Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements
    IEC 62040-1-1:2002 Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas
    IEC 61000-4-30 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    IEC 60831-1:2014 RLV Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
    UNE-EN 62110:2013 Magnetic field levels generated by a.c. power systems - Measurement procedures with regard to public exposure
    00/246907 DC : DRAFT DEC 2000 BS EN 61980-1 - ELECTRICAL - ELECTRIC VEHICLE INDUCTIVE CHARGING SYSTEMS - PART 1: GENERAL REQUIREMENTS
    ISO 4064-2:2014 Water meters for cold potable water and hot water Part 2: Test methods
    IEC 62080:2001+AMD1:2008+AMD2:2015 CSV Sound signalling devices for household and similar purposes
    IEC 62040-5-3:2016 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
    IEC 60146-2:1999 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters
    IEC 61000-3-12:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
    IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 CSV Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
    IEC TR 61869-103:2012 Instrument transformers - The use of instrument transformers for power quality measurement
    IEC 62040-1-2:2002 Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations
    IEC 61000-4-30:2015 RLV Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
    IEC 61000-2-4:2002 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
    IEC 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
    IEC 61000-2-12:2003 Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
    IEC 61000-4-7:2002+AMD1:2008 CSV Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    BS EN 60669-2-1 : 2004 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
    09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
    16/30301661 DC : 0 BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    EN 62310-3:2008 Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements
    EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
    PREN 50539-11 : DRAFT 2010 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    UNE-EN 50533:2012 Railway applications - Three-phase train line voltage characteristics.
    EN 61851-22:2002 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
    08/30195242 DC : 0 BS EN 62599-2 IEC 62599 - ALARM SYSTEMS - GENERAL REQUIREMENTS - PART 2 - ELECTRO-MAGNETIC COMPATIBILITY
    PREN 50533 : DRAFT 2009 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
    09/30200143 DC : 0 BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    06/30156472 DC : DRAFT SEP 2006 BS EN 60146-1-1 - SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
    NF EN 61000-2-4 : 2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
    CSA C61000.3.7 : 2009 : R2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-7: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF FLUCTUATING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    10/30218152 DC : 0 BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    CSA C61000.3.7 : 2009 : R2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-7: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF FLUCTUATING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
    BS EN 61000-3-12:2011 Electromagnetic compatibility (EMC) Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase
    CEI CLC/TS 50509 : 2008 USE OF LED SIGNAL HEADS IN ROAD TRAFFIC SIGNAL SYSTEMS
    PD IEC/TR 61000-3-7:2008 Electromagnetic compatability (EMC) Limits. Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
    BS EN 60146-1-1:2010 Semiconductor converters. General requirements and line commutated converters Specification of basic requirements
    CLC/TS 50549-1:2015 Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network above 16 A
    NF EN 62040-1 : 2009 AMD 1 2013 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
    BS EN 62040-2:2006 Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements
    S.R. CLC/TR 50422:2013 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    BS ISO 17089-1:2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
    CSA C61000-4-30 : 2010 : R2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    I.S. EN 61000-3-12:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011 (EQV))
    ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
    BS EN 62080 : 2009 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    I.S. EN 61000-4-19:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-19: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, DIFFERENTIAL MODE DISTURBANCES AND SIGNALLING IN THE FREQUENCY RANGE 2 KHZ TO 150 KHZ AT A.C. POWER PORTS
    I.S. EN 61000-2-4:2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
    CEI EN 62310-3 : 2010 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
    I.S. EN 61000-3-2:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    I.S. EN 61000-4-7:2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
    BS EN 61000-4-13 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002)
    OVE/ONORM EN 62040-2 : 2006
    BS EN 50160 : 2010 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
    I.S. EN 61000-4-30:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
    IEC 60364-5-51:2005 Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
    CLC/TR 50669:2017 Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz
    IEC 62933-2-1:2017 Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
    EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
    BS EN 809:1998+A1:2009 Pumps and pump units for liquids. Common safety requirements
    I.S. TR 50422:2004 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    IEC TS 62257-12-1:2015 Recommendations for renewable energy and hybrid systems for rural electrification - Part 12-1: Selection of lamps and lighting appliances for off-grid electricity systems
    IEC 62003:2009 Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing
    IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches
    IEC 60669-2-5:2013 Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES)
    EN 62040-1:2008/A1:2013 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013)
    EN 61800-3 : 2004 AMD 1 2012 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
    IEC 62040-2:2016 RLV Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    IEC TR 61000-2-5:2017 RLV Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
    BS EN 62040-1-2:2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations
    11/30203695 DC : 0 BS EN 60669-2-5 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
    IEC 61543:1995 Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
    EN 60931-1:1996/A1:2003 SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION
    EN 62110:2009/AC:2015 ELECTRIC AND MAGNETIC FIELD LEVELS GENERATED BY AC POWER SYSTEMS - MEASUREMENT PROCEDURES WITH REGARD TO PUBLIC EXPOSURE
    EN 61921:2003 Power capacitors - Low-voltage power factor correction banks
    EN 61000-4-14:1999/A2:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
    EN 50090-2-2:1996/A2:2007 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
    EN 61543:1995/A2:2006 RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY
    EN 60146-1-1:2010 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
    EN 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
    EN 62040-1-1:2003/corrigendum:2004
    EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
    EN 62040-2:2006/corrigendum:2006
    EN 50533 : 2011 AMD 1 2016 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
    EN 60146-2:2000 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters
    EN 61000-4-7:2002/A1:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO (IEC 61000-4-7:2002/A1:2008)
    UNE-EN 809:1999 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
    IEC 60038:2009 IEC standard voltages
    IEC 61000-4-15 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
    AS IEC 62040.2:2019 Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements
    IEC 61000-2-4:2002 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
    IEC TR 61000-1-1:1992 Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms
    IEC TS 62578:2015 Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz
    IEC 61037:1990+AMD1:1996+AMD2:1998 CSV Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers
    CISPR 16-1-1:2015 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
    SA TR IEC 61000.2.5:2019 Electromagnetic compatibility (EMC) Environment - Description and classification of electromagnetic environments
    CISPR 16-2-1:2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
    IEC 60050-551:1998 International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics
    IEC 60050-101:1998 International Electrotechnical Vocabulary (IEV) - Part 101: Mathematics
    IEC 61000-3-8:1997 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels
    IEC 61000-4-15:2010 Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
    IEC TR 61000-2-1:1990 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
    IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
    IEC 61000-4-7:2002+AMD1:2008 CSV Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    EN 50065-1:2011 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances
    CLC/TR 50627:2015 Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz
    IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective