IEC 62368-1 : 2.0

AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS

International Electrotechnical Committee

Withdrawn

Add To Cart

Product Format

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
0 Principles of this product safety standard
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 General requirements
5 Electrically-caused injury
6 Electrically-caused fire
7 Injury caused by hazardous substances
8 Mechanically-caused injury
9 Thermal burn injury
10 Radiation
Annex A (informative) - Examples of equipment within
        the scope of this standard
Annex B (normative) - Normal operating condition tests,
        abnormal operating condition tests and single
        fault condition tests
Annex C (normative) - UV radiation
Annex D (normative) - Test generators
Annex E (normative) - Test conditions for equipment containing
        audio amplifiers
Annex F (normative) - Equipment markings, instructions, and
        instructional safeguards
Annex G (normative) - Components
Annex H (normative) - Criteria for telephone ringing signals
Annex I (informative) - Overvoltage categories
Annex J (normative) - Insulated winding wires for use
        without interleaved insulation
Annex K (normative) - Safety interlocks
Annex L (normative) - Disconnect devices
Annex M (normative) - Equipment containing batteries and
        their protection circuits
Annex N (normative) - Electrochemical potentials (V)
Annex O (normative) - Measurement of creepage distances
        and clearances
Annex P (normative) - Safeguards against conductive objects
Annex Q (normative) - Circuits intended for interconnection
        with building wiring
Annex R (normative) - Limited short-circuit test
Annex S (normative) - Tests for resistance to heat and fire
Annex T (normative) - Mechanical strength tests
Annex U (normative) - Mechanical strength of CRTs and
        protection against the effects Of implosion
Annex V (normative) - Determination of accessible parts
Annex W (informative) - Comparison of terms introduced
        in this standard
Bibliography

Abstract - (Show below) - (Hide below)

Pertains to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Withdrawn
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 108
Superseded By	IEC 62368-1:2018

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN 62368-1 : 2014 COR 2017	Identical
CSA C22.2 No. 62368-1 : 2014(R2019)	Identical
NF EN 62368-1 : 2014	Identical
VDE 0868-1 : 2016 AMD 11 2017	Identical
GOST IEC 62368-1 : 2014	Identical
NEN EN IEC 62368-1: 2014	Identical
SN EN 62368-1 : 2014	Identical
EN 62368-1 : 2014	Identical
PN-EN 62368-1:2015-03	Identical
DS EN 62368-1 : 2014	Identical
PN-EN 62368-1:2015-03	Identical
SN EN 62368-1 : 2014	Identical
NEN EN IEC 62368-1: 2014	Identical
DS INF 62368-1 : 2012	Identical
GOST IEC 62368-1 : 2014	Identical
NBN IEC 62368-1 : 2011	Identical
DS EN 62368-1 : 2014 COR 2017	Identical
CSA C22.2 No. 62368-1 : 2014(R2019)	Identical
SANS 62368-1 : 1ED 2011	Identical
VDE 0868-1 : 2016 AMD 11 2017	Identical
EN 62368-1 : 2014	Identical
DS EN 62368-1 : 2014	Identical
NF EN 62368-1 : 2014	Identical
NEN IEC 62368-1 : 2011	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

15/30321532 DC : 0	BS EN 62368-3 ED. 1.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - PART 3: REMOTE POWER FEEDING
AAMI IEC TIR 60878 : 2003	GRAPHICAL SYMBOLS FOR ELECTRICAL EQUIPMENT IN MEDICAL PRACTICE
UNE EN 62075 : 2013	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
UNE EN 60695-1-10 : 2017	FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
BS EN 62087-6 : 2015	AUDIO, VIDEO AND RELATED EQUIPMENT - DETERMINATION OF POWER CONSUMPTION - PART 6: AUDIO EQUIPMENT
EN 61960-3 : 2017	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 3: PRISMATIC AND CYLINDRICAL LITHIUM SECONDARY CELLS, AND BATTERIES MADE FROM THEM (IEC 61960-3:2017)
13/30287467 DC : 0	BS EN 62040-1 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
EN 62680-1-2 : OCT 2017	UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER - PART 1-2: COMMON COMPONENTS - USB POWER DELIVERY SPECIFICATION (IEC 62680-1-2:2017)
17/30352643 DC : 0	BS IEC 62684 ED2.0 - INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
ISO/IEC GUIDE 51 : 2014	SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
BS PD IEC TR 60878 : 2015	GRAPHICAL SYMBOLS FOR ELECTRICAL EQUIPMENT IN MEDICAL PRACTICE
PREN 50332-2 : DRAFT 2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY
15/30327916 DC : 0	BS EN 63002 ED. 1.0 - DENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNALPOWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES (TA 14)
I.S. EN 62087-6:2015	AUDIO, VIDEO AND RELATED EQUIPMENT - DETERMINATION OF POWER CONSUMPTION - PART 6: AUDIO EQUIPMENT
ECMA 341 : 4ED 2010	ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS
BS EN 61960-3 : 2017	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 3: PRISMATIC AND CYLINDRICAL LITHIUM SECONDARY CELLS, AND BATTERIES MADE FROM THEM (IEC 61960-3:2017)
CLC/TR 50656 : 2016	SPD APPLICATION IN CONJUNCTION WITH CLASS 2 EQUIPMENT
14/30312710 DC : 0	BS EN 62911 ED. 1.0 - AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
BS PD CLC/TR 50656 : 2016	SPD APPLICATION IN CONJUNCTION WITH CLASS 2 EQUIPMENT
EN 63002 : 2017	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES (IEC 63002:2016)
14/30280175 DC : 0	BS EN 61204-7 - LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
CEI EN 62949 : 1ED 2017	PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS
BS PD ISO/IEC GUIDE 50 : 2014	SAFETY ASPECTS - GUIDELINES FOR CHILD SAFETY IN STANDARDS AND OTHER SPECIFICATIONS
11/30246444 DC : 0	BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
DIN 820-12 : 2014	STANDARDIZATION - PART 12: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:2014)
13/30280858 DC : 0	BS EN 60940 - GUIDANCE INFORMATION ON THE APPLICATION OF CAPACITORS, RESISTORS, INDUCTORS AND COMPLETE FILTER UNITS FOR RADIO INTERFERENCE SUPPRESSION - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
13/30281665 DC : 0	BS EN 50332-2 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY
10/30240267 DC : 0	BS EN 60601-2-66 ED.1 - ELECTROACOUSTICS - PART 2-66: HEARING INSTRUMENTS AND HEARING SYSTEMS - GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
IEEE C62.33 : 1982	TEST METHODS AND PERFORMANCE VALUES FOR METAL-OXIDE VARISTOR SURGE PROTECTIVE COMPONENTS
BS EN 63002 : 2017	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES
UNE EN 61938 : 2014	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
I.S. EN 62949:2017	PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS
13/30240399 DC : 0	ISO/IEC GUIDE 51 - SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
EN 50332-3 : 2017	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 3: MEASUREMENT METHOD FOR SOUND DOSE MANAGEMENT
13/30293673 DC : 0	BS EN 61960 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS
16/30351255 DC : 0	BS EN 61960-4 ED 1.0 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - PART 4: COIN TYPE SECONDARY LITHIUM CELLS AND BATTERIES
16/30354071 DC : 0	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
IEC 60950-22 REDLINE : 2ED 2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
NF EN 62949 : 2017	PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS
BS PD ISO/IEC GUIDE 51 : 2014	SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
UNE EN 60065 : 2015	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS EN 62949 : 2017	PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS (IEC 62949:2017)
15/30321536 DC : 0	BS EN 62949 ED. 1.0 - PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO PAIREDCONDUCTOR COMMUNICATION NETWORKS
15/30287154 DC : 0	BS EN 60601-2-40 ED 2.0 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-40: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT - PROPOSED HORIZONTAL STANDARD
16/30338723 DC : 0	BS EN 61643-11:2012/A - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
BS EN 62911 : 2016	AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
DIN 820-12 E : 2014	STANDARDIZATION - PART 12: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:2014)
15/30329267 DC : 0	BS EN 60747-17 - SEMICONDUCTOR DEVICES - PART 17: MAGNETIC AND CAPACITIVE COUPLER FOR BASIC AND REINFORCED ISOLATION
BS EN 50332-3 : 2017	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 3: MEASUREMENT METHOD FOR SOUND DOSE MANAGEMENT
BS EN IEC 63044-3 : 2018	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
BS EN 60940 : 2015	GUIDANCE INFORMATION ON THE APPLICATION OF CAPACITORS, RESISTORS, INDUCTORS AND COMPLETE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION
IEC 62684 REDLINE : 2.0	INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
EN 62949 : 2017	PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS (IEC 62949:2017)
BS EN 62680-1-2 : 2017	UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER - PART 1-2: COMMON COMPONENTS - USB POWER DELIVERY SPECIFICATION (IEC 62680-1-2:2017)
BS EN 50332-2 : 2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDIZED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS
BS EN 50604-1 : 2016	SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
IEC 61938 : 3.0	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
EN IEC 61204-7 : 2018	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS (IEC 61204-7:2016)
BS EN 61938 : 2013	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
BS EN 60950-22 : 2017	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS (IEC 60950-22:2016)
CSA C22.2 No. 60065 : 2016	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
IEC 60990 REDLINE : 3ED 2016	METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
CEI EN 62075 : 2013	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
IEC 60065 : 1970	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
IEC GUIDE 110 : 2.0	HOME CONTROL SYSTEMS - GUIDELINES RELATING TO SAFETY
BS PD IEC TS 60695-1-14 : 2017	FIRE HAZARD TESTING - PART 1-14: GUIDANCE ON THE DIFFERENT LEVELS OF POWER AND ENERGY RELATED TO THE PROBABILITY OF IGNITION AND FIRE IN LOW VOLTAGE ELECTROTECHNICAL PRODUCTS
IEC 61938 REDLINE : 3ED 2018	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
IEC 60335-2-82:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
EN 50131-1 : 2006 AMD 2 2017	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
CEI EN 50332-3 : 1ED 2017	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 3: MEASUREMENT METHOD FOR SOUND DOSE MANAGEMENT
IEC 61204-7 : 2.0	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
BS PD IEC TR 63079 : 2017	CODE OF PRACTICE FOR HEARING-LOOP SYSTEMS (HLS)
UNE EN 50131-1 : 2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
CEI EN 61938 : 2014	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
IEC 63044-3 : 1ED 2017	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
IEC 62949 : 1ED 2017	PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS
IEC TR 63079 : 1ED 2017	CODE OF PRACTICE FOR HEARING-LOOP SYSTEMS (HLS)
BS EN 50131-1 : 2006	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 61960-3:2017	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 3: PRISMATIC AND CYLINDRICAL LITHIUM SECONDARY CELLS, AND BATTERIES MADE FROM THEM
I.S. EN IEC 60728-3:2018	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5)
I.S. EN IEC 62684:2018	INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
I.S. EN 50332-2:2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS
IEC 63002 : 1ED 2016	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES
I.S. EN 62911:2016	AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
I.S. EN IEC 61938:2018	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
I.S. EN 60065:2014&AC:2016&A11:2017...AC:2018	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN 60950-22:2017	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
EN 50174-3 : 2013 AMD 1 2017	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
I.S. EN 61643-11:2012	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
ES 203 474 : 1.1.1	ENVIRONMENTAL ENGINEERING (EE); INTERFACING OF RENEWABLE ENERGY OR DISTRIBUTED POWER SOURCES TO 400 VDC DISTRIBUTION SYSTEMS POWERING INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) EQUIPMENT
BS EN 62075 : 2012	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
I.S. EN 62733:2015	PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS
IEC 61960-3 : 1ED 2017	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 3: PRISMATIC AND CYLINDRICAL LITHIUM SECONDARY CELLS, AND BATTERIES MADE FROM THEM
IEC 61204-3 REDLINE : 3ED 2016	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
I.S. EN 60990:2016	METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
I.S. EN IEC 63044-3:2018	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
I.S. EN 60695-1-10:2017	FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
I.S. EN 50174-3:2013	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
ECMA/TR 106 : 1ED 2013	GUIDANCE AND COMPARISON BETWEEN 60950-1 AND 62368-1
IEC 60695-1-10 REDLINE : 2ED 2016	FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
BS EN 60990 : 2000	METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
CSA C22.2 No. 60601.2.40 : 2017	MEDICAL ELECTRICAL EQUIPMENT - PART 2-40: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT
I.S. EN IEC 61204-7:2018	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
BS EN 60065 : 2014	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
I.S. EN 50332-3:2017	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 3: MEASUREMENT METHOD FOR SOUND DOSE MANAGEMENT
I.S. EN 62680-1-2:2017	UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER - PART 1-2: COMMON COMPONENTS - USB POWER DELIVERY SPECIFICATION
EN IEC 60728-3 : 2018	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5) (IEC 60728-3:2017)
IEC GUIDE 112 : 4.0	GUIDE ON THE SAFETY OF MULTIMEDIA EQUIPMENT
EN IEC 61938 : 2018	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY (IEC 61938:2018)
I.S. EN 60950-1:2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
BS PD IEC TR 60601-4-3 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
CEI EN 63002 : 1ED 2017	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES
EN IEC 63044-3 : 2018	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS (IEC 63044-3:2017)
NF EN 60950-22 : 2017	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
EN IEC 62684 : 2018	INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES (IEC 62684:2018)
IEC TR 60878 : 3.0	GRAPHICAL SYMBOLS FOR ELECTRICAL EQUIPMENT IN MEDICAL PRACTICE
SR CLC/TR 50656:2016	SPD APPLICATION IN CONJUNCTION WITH CLASS 2 EQUIPMENT
IEC 62684 : 2.0	INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
I.S. EN 60940:2015	GUIDANCE INFORMATION ON THE APPLICATION OF CAPACITORS, RESISTORS, INDUCTORS AND COMPLETE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION
I.S. EN 63002:2017	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES
IEC 62040-1 : 2.0	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS
ISO/IEC GUIDE 50 : 2014	SAFETY ASPECTS - GUIDELINES FOR CHILD SAFETY IN STANDARDS AND OTHER SPECIFICATIONS
IEC 60730-1 : 5.1	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61938:2013	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY (IEC 61938:2013 (EQV))
I.S. EN 62075:2012	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV))
IEC 60950-1 : 2.2	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 61204-3 : 3.0	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
IEC 62368-3 : 1ED 2017	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 3: SAFETY ASPECTS FOR DC POWER TRANSFER THROUGH COMMUNICATION CABLES AND PORTS
IEC 60728-3 REDLINE : 5ED 2017	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
IEC TR 63167 : 1ED 2018	ASSESSMENT OF CONTACT CURRENT RELATED TO HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS
IEC TS 60695-1-14 : 1ED 2017	FIRE HAZARD TESTING - PART 1-14: GUIDANCE ON THE DIFFERENT LEVELS OF POWER AND ENERGY RELATED TO THE PROBABILITY OF IGNITION AND FIRE IN LOW VOLTAGE ELECTROTECHNICAL PRODUCTS
IEC 60601-2-40 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-40: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT
IEC TR 60601-4-3 : 1ED 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
I.S. EN 50131-1:2006	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
IEC 62733 : 2015 COR 1 2017	PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS
IEC 60728-3 : 5.0	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60695-11-20 : 2.0	FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHOD
IEC 60950-1 : 2.2	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 60112 : 4.1	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC 60320-1 : 3.0	APPLIANCES COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
ISO 4892-1 : 2016	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
IEC 60906-3 : 1.0	IEC SYSTEM OF PLUGS AND SOCKET OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - SELV PLUGS AND SOCKET OUTLETS, 16 A 6 V, 12 V, 24 V, 48 V, a.c. AND d.c.
IEC 60728-11 : 4.0	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
IEC 61643-321 : 1.0	COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 321: SPECIFICATIONS FOR AVALANCHE BREAKDOWN DIODE (ABD)
IEC 61558-2-1 : 2.0	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 2-1: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS AND POWER SUPPLIES INCORPORATING SEPARATING TRANSFORMERS FOR GENERAL APPLICATIONS
IEC 60825-2 : 3.2	SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
IEC 60065 : 1970	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
IEC 60245-1 : 4.1	RUBBER INSULATED CABLES - RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 1: GENERAL REQUIREMENTS
ISO 7010 : 2011	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
IEC 60998-1 : 2.0	CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
IEC 60738-1 : 3.1	THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
IEC TS 60479-1 : 4.1	EFFECTS OF CURRENT ON HUMAN BEINGS AND LIVESTOCK - PART 1: GENERAL ASPECTS
IEC 60107-1 : 3.0	METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIONS - GENERAL CONSIDERATIONS - MEASUREMENTS AT RADIO AND VIDEO FREQUENCIES
IEC 60664-4 : 2.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS
IEC 61984 : 2.0	CONNECTORS - SAFETY REQUIREMENTS AND TESTS
IEC 60384-14 : 4.1	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
ISO 871 : 2006(R2015)	PLASTICS - DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE
IEC 60896-11 : 1.0	STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES - GENERAL REQUIREMENTS AND METHODS OF TESTS
IEC 61427 : 2.0	SECONDARY CELLS AND BATTERIES FOR PHOTOVOLTAIC ENERGY SYSTEMS (PVES) - GENERAL REQUIREMENTS AND METHODS OF TEST
ISO 3864-2 : 2016	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 2: DESIGN PRINCIPLES FOR PRODUCT SAFETY LABELS
EN 50491-3 : 2009	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
IEC 61558-2-4 : 2.0	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-4: PARTICULAR REQUIREMENTS AND TESTS FOR ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING ISOLATING TRANSFORMERS
IEC 61293 : 1.0	MARKING OF ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS
IEC TS 61201 : 2.0	USE OF CONVENTIONAL TOUCH VOLTAGE LIMITS - APPLICATION GUIDE
IEC TR 60083 : 7.0	PLUGS AND SOCKET-OUTLETS FOR DOMESTIC AND SIMILAR GENERAL USE STANDARDIZED IN MEMBER COUNTRIES OF IEC
ISO 9773 : 1998(R2014)	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR OF FLEXIBLE VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE
IEC 61430 : 1.0	SECONDARY CELLS AND BATTERIES - TEST METHODS FOR CHECKING THE PERFORMANCE OF DEVICES DESIGNED TO REDUCING EXPLOSION HAZARDS - LEAD-ACID STARTER BATTERIES
IEC 60332-1-3 : 1.1	TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES
IEC TR 62471-2 : 1.0	PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 2: GUIDANCE ON MANUFACTURING REQUIREMENTS RELATING TO NON-LASER OPTICAL RADIATION SAFETY
IEC 60169-3 : 1.0	RADIO-FREQUENCY CONNECTORS - TWO-PIN CONNECTOR FOR TWIN BALANCED AERIAL FEEDERS
IEC 60999-2 : 2.0	CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 2: PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS ABOVE 35 MM[2] UP TO 300 MM[2] (INCLUDED)
IEC 60896-21 : 1.0	STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST
IEC 60269-2 : 5.1	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
IEC 62151 : 1.0	SAFETY OF EQUIPMENT ELECTRICALLY CONNECTED TO A TELECOMMUNICATION NETWORK
IEC 61558-2-16 : 2013	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
IEC 60130-9 : 4.0	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
IEC 60068-2-78 : 2.0B+(REDLINE+VERSION)	ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE
IEC 60332-2-2 : 1.0	TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE -PROCEDURE FOR DIFFUSION FLAME
IEC 60825-1 : 3.0	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
CFR 21(PTS800-1299) : 0	FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299
ISO 8256 : 2004(R2017)	PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
IEC 60825-12 : 1.0	SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
IEC 60227-2 : 2.1	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2: TEST METHODS
ITU P.360 : 2006	EFFICIENCY OF DEVICES FOR PREVENTING THE OCCURRENCE OF EXCESSIVE ACOUSTIC PRESSURE BY TELEPHONE RECEIVERS AND ASSESSMENT OF DAILY NOISE EXPOSURE OF TELEPHONE USERS
IEC 61810-1 : 4.0	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
IEC 60950-22 : 2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
IEC 61558-2-6 : 2.0	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS
IEC 60950-23 : 1.0	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
IEC 61643-21 : 1.2	LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS
IEC 60695-10-3 : 2.0	FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
IEC 60027-1 : 6.0	LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL
IEC 60851-6 : 3.0	WINDING WIRES - TEST METHODS - PART 6: THERMAL PROPERTIES
IEC 60851-5 : 4.1	WINDING WIRES - TEST METHODS - PART 5: ELECTRICAL PROPERTIES
IEC 61643-311 : 2.0	COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 311: PERFORMANCE REQUIREMENTS AND TEST CIRCUITS FOR GAS DISCHARGE TUBES (GDT)
IEC 61056-2 : 3.0	GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING
IEC 60227-1 : 2007	POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 1: GENERAL REQUIREMENTS
IEC 60332-1-2 : 1.1	TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME
IEC 60999-1 : 2.0	CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED)
EN 60728-11 : 2017	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY (IEC 60728-11:2016 + COR1:2016)
IEC 60601-2-4 : 3.0	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CARDIAC DEFIBRILLATORS
IEC 60085 : 4.0	ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
IEC TR 62368-2 : 2.0	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 2: EXPLANATORY INFORMATION RELATED TO IEC 62368-1
IEC 60320-2-2 : 2.0	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - INTERCONNECTION COUPLERS FOR HOUSEHOLD AND SIMILAR EQUIPMENT
ISO/IEC GUIDE 51 : 2014	SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
IEC 61558-1 : 3.0	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 50332-1 : 2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
ISO/IEC GUIDE 37 : 2012	INSTRUCTIONS FOR USE OF PRODUCTS BY CONSUMERS
EN 71-1 : 2014	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
IEC 61643-1 : 2.0	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 1: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - REQUIREMENTS AND TESTS
ISO 180 : 2000(R2011)	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
IEC 60906-2 : 3.0	IEC SYSTEM OF PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2: PLUGS AND SOCKET-OUTLETS 15 A 125 V A.C. AND 20 A 125 V A.C.
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
ISO 9772 : 2012(R2017)	CELLULAR PLASTICS - DETERMINATION OF HORIZONTAL BURNING CHARACTERISTICS OF SMALL SPECIMENS SUBJECTED TO A SMALL FLAME
IEC 61058-1 : 4.0	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
IEC 60896-22 : 1.0	STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS
IEC 60364-4-44 : 2.1	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES
IEC 60691 : 4.0	THERMAL-LINKS - REQUIREMENTS AND APPLICATION GUIDE
IEC 60947-1 : 5.2	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
IEC 61056-1 : 3.0	GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST
IEC 60695-11-10 : 2.0	FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS
IEC 61051-2 : 1.0	VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION FOR SURGE SUPPRESSION VARISTORS
IEC 61643-11 : 1.0	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
IEC TS 60695-11-21 : 1.0	FIRE HAZARD TESTING - PART 11-21: TEST FLAMES - 500 W VERTICAL FLAME TEST METHOD FOR TUBULAR POLYMERIC MATERIALS
IEC 60906-1 : 2.0	IEC SYSTEM OF PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: PLUGS AND SOCKET-OUTLETS 16 A 250 V A.C.
EN 50332-2 : 2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS
IEC 60851-3 : 3.1	WINDING WIRES - TEST METHODS - PART 3: MECHANICAL PROPERTIES
IEC 60664-5 : 2.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 5: COMPREHENSIVE METHOD FOR DETERMINING CLEARANCES AND CREEPAGE DISTANCES EQUAL TO OR LESS THAN 2 MM
ISO 4892-4 : 2013(R2018)	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: OPEN-FLAME CARBON-ARC LAMPS
IEC 62471 : 1.0 : 2006	PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS
ISO 179-1 : 2010(R2015)	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
ISO 4892-2 : 2013(R2018)	PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
IEC 61965 : 2.0	MECHANICAL SAFETY OF CATHODE RAY TUBES
IEC 61434 : 1.0	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - GUIDE TO THE DESIGNATION OF CURRENT IN ALKALINE SECONDARY CELL AND BATTERY STANDARDS
IEC 60664-3 : 3.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
IEC 61643-331 : 1.0	COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 331: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR METAL OXIDE VARISTORS (MOV)
ITU K.27 : 2015	BONDING CONFIGURATIONS AND EARTHING INSIDE A TELECOMMUNICATION BUILDING
IEC 60747-5-5 : 1.1	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
IEC 60086-5 : 4.0	PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
IEC 62133 : 2.0EN+(REDLINE+VERSION)	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
IEC 60695-10-2 : 3.0 : 2014	FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
ITU K.44 : 2017	RESISTIBILITY TESTS FOR TELECOMMUNICATION EQUIPMENT EXPOSED TO OVERVOLTAGES AND OVERCURRENTS - BASIC RECOMMENDATION
IEC 61508-1 : 2.0	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEC 60086-4 : 4.0	PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES
ISO 7000 : 2014	GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - REGISTERED SYMBOLS
IEC 60317-43 : 1.1	SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240
IEC 61140 : 4.0	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATIONS AND EQUIPMENT
IEC 61204-7 : 2.0	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
IEC 61032 : 2.0 : 1997	BASIC SAFETY PUBLICATION - PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION
IEC 61959 : 1.0	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES
IEC 60068-2-6 : 0	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
IEC 60695-11-5 : 2.0	FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60309-1 : 4.2	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
AS/NZS 3112:2017	Approval and test specification - Plugs and socket-outlets
ISO 178 : 2010(R2015)	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
IEC 62281 : 3.0	SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT
IEC 60664-1 : 2.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
IEC 61051-1:2007	VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 62485-2 : 1.0	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES
IEC 60990 : 3.0	METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
IEC 60730-1 : 5.1	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS