ISO 13003:2003
|
Fibre-reinforced plastics Determination of fatigue properties under cyclic loading conditions |
ISO 13373-1:2002
|
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures |
ISO 19901-2:2017
|
Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
API 2A WSD : 2014
|
PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
ISO 19900:2013
|
Petroleum and natural gas industries General requirements for offshore structures |
ISO 11303:2002
|
Corrosion of metals and alloys Guidelines for selection of protection methods against atmospheric corrosion |
ISO 15024:2001
|
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials |
ISO 11403-3:2014
|
Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties |
IEC 60812:2006
|
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
ISO 22965-1:2007
|
Concrete — Part 1: Methods of specifying and guidance for the specifier |
ISO 14688-1:2002
|
Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description |
ISO 19901-7:2013
|
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
ISO 12473:2017
|
General principles of cathodic protection in seawater |
ISO 2394:2015
|
General principles on reliability for structures |
IEC TS 62600-10:2015
|
Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy converters (MECs) |
ISO 11306:1998
|
Corrosion of metals and alloys Guidelines for exposing and evaluating metals and alloys in surface sea water |
ISO 1940-1:2003
|
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
IMO IF110 : 2014 SUPP 2016
|
SOLAS CONSOLIDATED EDITION |
ASCE 7 05 : 2006
|
MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
ISO 19903:2006
|
Petroleum and natural gas industries Fixed concrete offshore structures |
ISO 13373-2:2016
|
Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data |
GL IV-2-1 TO 13 : 2012
|
INDUSTRIAL SERVICES - PART 2: OFFSHORE WIND ENERGY - CHAPTER 1-13: GUIDELINE FOR THE CERTIFICATION OF OFFSHORE WIND TURBINES |
ISO 1052:1982
|
Steels for general engineering purposes |
API 2A : 1986
|
RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS |
ISO 10418:2003
|
Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
ISO 19904-1:2006
|
Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
ISO 19901-4:2016
|
Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
ISO 19901-3:2014
|
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
ISO 11403-2:2012
|
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties |
IEC 60721-2-1:2013
|
Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
IMO IA811 : 2001
|
MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
ISO 19902:2007
|
Petroleum and natural gas industries Fixed steel offshore structures |
ISO 19906:2010
|
Petroleum and natural gas industries Arctic offshore structures |
ISO 19499:2007
|
Mechanical vibration Balancing Guidance on the use and application of balancing standards |
IEC TS 62600-201:2015
|
Marine energy - Wave, tidal and other water current converters - Part 201: Tidal energy resource assessment and characterization |
IEC TS 62600-1:2011
|
Marine energy - Wave, tidal and other water current converters - Part 1: Terminology |
IEC 61400-3:2009
|
Wind turbines - Part 3: Design requirements for offshore wind turbines |
EN 12495 : 2000
|
CATHODIC PROTECTION FOR FIXED STEEL OFFSHORE STRUCTURES |
IEC 61643-11:2011
|
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 14125:1998
|
Fibre-reinforced plastic composites Determination of flexural properties |
IEC 60092-301:1980
|
Electrical installations in ships - Part 301: Equipment - Generators and motors |
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
EN 12696 : 2000
|
CATHODIC PROTECTION OF STEEL IN CONCRETE |
EN 13173 : 2001
|
CATHODIC PROTECTION FOR STEEL OFFSHORE FLOATING STRUCTURES |
ISO 11403-1:2014
|
Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties |
ISO 14130:1997
|
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
ISO 19901-5:2016
|
Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
ISO 19901-1:2015
|
Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
ISO 14126:1999
|
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
EN 1998-1:2004/A1:2013
|
EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS |
ISO 19905-1:2016
|
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups |
IEC 61400-1:2005+AMD1:2010 CSV
|
Wind turbines - Part 1: Design requirements |
IEC 62305-3:2010
|
Protection against lightning - Part 3: Physical damage to structures and life hazard |
BS 6744(2001) : 2001
|
STAINLESS STEEL BARS FOR THE REINFORCEMENT OF AND USE IN CONCRETE - REQUIREMENTS AND TEST METHODS |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
IMO I810 : 2010
|
2009 MODU CODE |
ISO 14129:1997
|
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |