DIN 874-1:2003-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 1: STEEL STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS |
BS ISO 3029:1995
|
Photography. 126 size cartridges. Dimensions of cartridge, film and backing paper |
BS ISO 1009:2000
|
Photography. Paper dimensions. Rolls for printers |
DIN EN ISO 1938-1:2016-03
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
I.S. EN ISO 1938-2:2017
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
08/30167582 DC : DRAFT MAY 2008
|
BS ISO 12123 - OPTICS AND PHOTONICS - SPECIFICATION OF RAW OPTICAL GLASS |
BS IEC 62899-301-2:2017
|
Printed electronics Equipment. Contact printing. Rigid master. Measurement method of plate master pattern dimension |
17/30341082 DC : 0
|
BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
DD ENV ISO 14253-2:2001
|
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
ISO 10110-1:2006
|
Optics and photonics Preparation of drawings for optical elements and systems Part 1: General |
BS ISO 14546:2000
|
Photography. Aerial films and spools. Dimensions |
08/30169333 DC : DRAFT MAR 2008
|
BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
ISO/TR 16015:2003
|
Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
ISO 1007:2000
|
Photography 135-size film and magazine Specifications |
ISO 230-1:2012
|
Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
ISO 22514-7:2012
|
Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
UNE-EN ISO 14253-2:2012
|
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011) |
I.S. EN ISO 3665:2013
|
PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS (ISO 3665:2011) |
ANSI PH1.17 : 1990
|
PHOTOGRAPHY (FILM) - MEDICAL RADIOGRAPHIC SHEET AND ROLL FILMS - DIMENSIONS |
UNI ISO 230-3 : 2010
|
TEST CODE FOR MACHINE TOOLS - PART 3: DETERMINATION OF THERMAL EFFECTS |
DIN EN 20898-2:1994-02
|
MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH COARSE PITCH THREAD AND SPECIFIED PROOF LOAD VALUES |
ASME B89.1.7 : 2009 : R2014
|
PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
ASME B89.1.7 : 2009
|
PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
ASME B89.1.14 : 2018
|
CALIPERS |
VDI/VDE 2617 Blatt 6.3:2008-12
|
Accuracy of coordinate measuring machines - Characteristics and their checking - Coordinate measuring machines with multiple probing systems |
VDI/VDE 2617 Blatt 6.1:2007-05
|
Accuracy of coordinate measuring machines - Characteristics and their testing - Coordinate measuring machines with optical probing - Code of practice for the application of DIN EN ISO 10360 to coordinate measuring machines with optical sensors for lateral structures |
DIN EN ISO 3665 E : 2013
|
PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS (ISO 3665:2011) |
BS EN ISO 14253-2:2011
|
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
BS EN ISO 286-1:2010
|
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
BS EN ISO 13225:2012
|
Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics |
UNE-EN ISO 13385-2:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
ISO 1502:1996
|
ISO general-purpose metric screw threads Gauges and gauging |
BS EN ISO 19152:2012
|
Geographic information. Land Administration Domain Model (LADM) |
DIN ISO 10110-1:2007-08
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 1: GENERAL |
ISO 14546:2000
|
Photography Aerial films and spools Dimensions |
DIN EN ISO 8015:2011-09
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
96/704404 DC : 0
|
ISO/DIS 9121 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - INTERNAL MICROMETERS WITH TWO-POINT CONTACT - DESIGN AND METROLOGICAL REQUIREMENTS |
16/30334592 DC : 0
|
BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
BS EN ISO 3665:2013
|
Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications |
DIN ISO 12123:2011-10
|
OPTICS AND PHOTONICS - SPECIFICATION OF RAW OPTICAL GLASS (ISO 12123:2010) |
BS ISO 22514-7:2012
|
Statistical methods in process management. Capability and performance Capability of measurement processes |
DIN EN ISO 13385-1:2011-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
DIN ISO 1012:2000-04
|
PHOTOGRAPHY - FILM IN SHEETS AND ROLLS FOR GENERAL USE - DIMENSIONS |
BS ISO 11312:2000
|
Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements |
DIN 874-2:2003-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 2: KNIFE EDGE STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS |
ISO/TS 15530-4:2008
|
Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
DIN EN ISO 12836:2015-11
|
DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
CGSB 39.21 : 1998
|
DIEMAKERS', MACHINISTS' AND CYLINDER SQUARES |
BS ISO 10959:2016
|
Aerospace. MJ threads. Gauging |
17/30341085 DC : 0
|
BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS |
ISO 14253-2:2011
|
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
UNE-ISO 230-10:2016
|
Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools. |
NF ISO 1132-1 : 2000
|
ROLLING BEARINGS - TOLERANCES - PART 1: TERMS AND DEFINITIONS |
ISO 732:2000
|
Photography 120-size and 220-size films Dimensions |
UNE-EN ISO 286-1:2011
|
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
BS ISO 230-10:2016
|
Test code for machine tools Determination of the measuring performance of probing systems of numerically controlled machine tools |
I.S. EN ISO 13385-1:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS |
ISO 13041-8:2004
|
Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions |
UNI EN ISO 13385-1 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS |
UNI EN ISO 14978 : 2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
ISO 13225:2012
|
Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics |
UNE-ISO 26303:2013
|
Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
VDI/VDE 2617 Blatt 10:2011-01
|
Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers |
VDI/VDE 2631-10 : 2014 COR 2015
|
FORM MEASUREMENT - DETERMINATION OF THE UNCERTAINTY OF FORM MEASUREMENTS |
ASME B89.1.6 : 2002 : R2012
|
MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
VDI/VDE 2617 Blatt 2.1:2014-03
|
Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement |
VDI/VDE 2617 Blatt 12.1:2011-03
|
Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries |
VDI/VDE 2617 Blatt 10.1:2014-05
|
Accuracy of coordinate measuring machines - Characteristics and their checking - Laser trackers with multiple probing systems |
VDI/VDE 2634 Blatt 2:2012-08
|
Optical 3-D measuring systems - Optical systems based on area scanning |
VDI/VDE 2617 Blatt 13; VDI/VDE 2630 Blatt 1.3:2011-12
|
VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors |
ASME B5.57 : 2012
|
METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
ASME B5.57 : 2012 : R2017
|
METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
VDI/VDE 2627 Blatt 1:2015-12
|
Measuring rooms - Classification and characteristics - Planning and execution |
VDI/VDE 2634 Blatt 3:2008-12
|
Optical 3D-measuring systems - Multiple view systems based on area scanning |
ASME B89.1.6 : 2002 : R2007
|
MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
ASME B89.1.6 : 2002
|
MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
ISO 12123:2010
|
Optics and photonics Specification of raw optical glass |
ISO 1012:1998
|
Photography Films in sheets and rolls for general use Dimensions |
ISO 3772:2000
|
Photography Rolls of sensitized material for the pre-press industry Dimensions and related requirements |
DIN EN ISO 13225:2012-08
|
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
ISO 6906:1984
|
Vernier callipers reading to 0,02 mm |
10/30216098 DC : 0
|
BS ISO 3665 - PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
UNI EN ISO 3665 : 2013
|
PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
BS EN ISO 1938-2:2017
|
Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
ONORM EN ISO 14978 : 2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
DD ISO/TS 15530-4:2008
|
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation |
BS ISO 1132-1:2000
|
Rolling bearings. Tolerances Terms and definitions |
BS 4500-1.1(1990) : AMD 7630
|
ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - SPECIFICATION FOR BASES OF TOLERANCES, DEVIATIONS AND FITS |
UNE-ISO 230-1:2014
|
Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
01/709336 DC : DRAFT JUN 2001
|
ISO 732 - PHOTOGRAPHY - 120-SIZE AND 220-SIZE FILMS - DIMENSIONS |
UNI ISO 10791-10 : 2010
|
TEST CONDITIONS FOR MACHINING CENTRES - PART 10: EVALUATION OF THERMAL DISTORTIONS |
ISO 5655:2000
|
Photography Industrial radiographic films (roll and sheet) and metal intensifying screens Dimensions |
16/30338746 DC : DRAFT APR 2016
|
BS ISO 15872 - AEROSPACE - UNJ THREADS - GAUGING |
BS ISO 1012:1998
|
Photography. Films in sheets and rolls for general use. Dimensions |
BS ISO 1008:1992
|
Photography. Paper dimensions. Pictorial sheets |
UNE-ISO 230-3:2010
|
Machine tools. Test code for machine tools. Part 3: Determination of thermal effects. |
BS ISO 3665 : 2011
|
PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
05/30133690 DC : DRAFT MAY 2005
|
IEC 60309-2 - PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES |
BS ISO 26303:2012
|
Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
DIN ISO 1502:1996-12
|
ISO GENERAL PURPOSE METRIC SCREW THREADS - GAUGES AND GAUGING |
PD ISO/TS 17865:2016
|
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems |
BS ISO 6148:2001
|
Photography. Micrographic films, spools and cores. Dimensions |
UNI EN ISO 286-1 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
BS ISO 732:2000
|
Photography. 120-size and 220-size films. Dimensions |
BS ISO 5655:2000
|
Photography. Industrial radiographic films (roll and sheet) and metal intensifying screens. Dimensions |
UNI ISO 22514-7:2014
|
STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
I.S. EN ISO 8015:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
UNE-EN ISO 8015:2012
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
UNE-EN ISO 3665:2013
|
Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011) |
ISO 491:2002
|
Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions |
I.S. EN ISO 14978:2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
ISO 286-1:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
UNI EN ISO 13225 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
ISO 18055-1:2004
|
Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) |
ISO/TR 9274:1991
|
Rolling bearings — Measuring and gauging principles and methods |
DIN EN ISO 14978:2006-09
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
EN ISO 14978:2006/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
I.S. EN ISO 13385-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
EN ISO 13385-2:2011
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
UNI EN 20286-1 : 1995
|
ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS |
BS ISO 10110-1:2006
|
Optics and photonics. Preparation of drawings for optical elements and systems General |
DIN EN ISO 3665:2013-07
|
PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS (ISO 3665:2011) |
BS ISO 14535:2001
|
Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and related requirements |
UNI ISO/TS 15530-4 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION |
04/30086896 DC : DRAFT JUN 2004
|
ISO 10110-1 - OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 1: GENERAL |
BS EN ISO 8015:2011
|
Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
BS IEC 62899-301-1:2017
|
Printed electronics Equipment. Contact printing. Rigid master. Measurement method of plate master external dimension |
95/711611 DC : 0
|
BS 919: PART 5 - GAUGES FOR TRAPEZOIDAL SCREW THREADS |
14/30287632 DC : 0
|
BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY |
BS ISO 230-1:2012
|
Test code for machine tools Geometric accuracy of machines operating under no-load or quasi-static conditions |
BS ISO 10791-10:2007
|
Test conditions for machining centres Evaluation of thermal distortions |
BS ISO 18055-1:2004
|
Photography and imaging. Inkjet media. Classification, nomenclature and dimensions Photo-grade media (paper and film) |
BS ISO 15872:2017
|
Aerospace. UNJ threads. Gauging |
BS ISO 1007:2000
|
Photography. 135-size film and magazine. Specifications |
ISO 10791-10:2007
|
Test conditions for machining centres — Part 10: Evaluation of thermal distortions |
BS ISO 13041-8:2004
|
Test conditions for numerically controlled turning machines and turning centres Evaluation of thermal distortions |
BS EN ISO 13385-1:2011
|
Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics |
DIN ISO 286-1:1990-11
|
ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS |
17/30346164 DC : 0
|
BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
I.S. EN ISO 1938-1:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
ISO 16239:2013
|
Metric series wires for measuring screw threads |
UNE-EN ISO 13225:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
I.S. EN ISO 13225:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012) |
ISO/TR 230-11:2018
|
Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests |
DIN EN ISO 14253-2:2011-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011) |
UNI EN ISO 14253-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
ASTM E 3125 : 2017
|
Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range |
ISO 230-10:2016
|
Test code for machine tools Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools |
ISO 10959:2016
|
Aerospace MJ threads Gauging |
ISO 1009:2000
|
Photography Paper dimensions Rolls for printers |
I.S. EN ISO 14253-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
BS EN 20898-2:1994
|
Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
BS EN 20286-1:1993
|
ISO system of limits and fits ISO system of limits and fits. Bases of tolerances, deviations and fits |
BS EN 28839:1992
|
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals |
ISO 3665:2011
|
Photography Intra-oral dental radiographic film and film packets Manufacturer specifications |
ISO 1938-1:2015
|
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
ISO 13385-1:2011
|
Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics |
ISO/TS 14253-2:1999
|
Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
ISO 8015:2011
|
Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
UNE-EN ISO 13385-1:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
ISO 1132-1:2000
|
Rolling bearings — Tolerances — Part 1: Terms and definitions |
ISO 13385-2:2011
|
Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics |
BS EN ISO 3650:1999
|
Geometrical product specifications (GPS). Length standards. Gauge blocks |
ISO 12836:2015
|
Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy |
EN 28839 : 1991
|
MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS (ISO 8839:1986) |
EN ISO 3665:2013
|
Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011) |
EN 20898-2 : 1993
|
MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
EN ISO 13385-1:2011
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
EN ISO 3650:1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS |
EN ISO 8015:2011
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
EN ISO 12836:2015
|
Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2015) |
EN ISO 286-1:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013) |
EN ISO 13225:2012
|
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
EN ISO 1938-1:2015
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
EN ISO 1938-2:2017
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
EN ISO 19152:2012
|
Geographic information - Land Administration Domain Model (LADM) (ISO 19152:2012) |
BS EN ISO 13385-2:2011
|
Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics |
I.S. EN ISO 286-1:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010) |
DIN EN ISO 1938-2 E : 2017
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
BS ISO 491:2002
|
Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions |
07/30169360 DC : 0
|
BS EN 4649 - AEROSPACE SERIES - HANDHELD FIRE EXTINGUISHERS WITH SYNTHESIS GASES, FOR AIRCRAFT USE - TECHNICAL SPECIFICATION AND QUALIFICATION CONDITIONS |
DIN EN ISO 1938-2:2017-05
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
NF EN ISO 13225 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
UNI ISO 13041-8 : 2010
|
TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 8: EVALUATION OF THERMAL DISTORTIONS |
17/30332220 DC : 0
|
BS ISO 12123 - OPTICS AND PHOTONICS - SPECIFICATION OF RAW OPTICAL GLASS |
BS ISO 16239:2013
|
Metric series wires for measuring screw threads |
11/30231340 DC : 0
|
BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
ENV ISO 14253-2 : DRAFT 2001
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENTS - PART 2: GUIDE TO THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
BS EN ISO 12836:2015
|
Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy |
BS EN ISO 1938-1:2015
|
Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
14/30299349 DC : 0
|
BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
12/30238558 DC : DRAFT SEP 2012
|
BS ISO 16239 - METRIC SERIES WIRES FOR MEASURING SCREW THREADS |
BS ISO 1132-2:2001
|
Rolling bearings. Tolerances Measuring and gauging principles and methods |
UNI EN ISO 8015 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
CSA B97.2 : 0
|
INTERPRETATIONS OF LIMITS AND TOLERANCES |
DIN EN ISO 13385-2:2013-06
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
96/704406 DC : 0
|
ISO/DIS 463 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - DIAL GAUGES - DESIGN AND METROLOGICAL REQUIREMENTS |
DD ISO/TS 23165:2006
|
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
ISO 3650:1998
|
Geometrical Product Specifications (GPS) Length standards Gauge blocks |
BS ISO 3772:2000
|
Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements |
91/78933 DC : DRAFT AUG 1991
|
ISO/DIS 1938-3 - INSPECTION OF PLAIN WORKPIECES - PART 3: GUIDELINES FOR INSPECTION USING WORKSHOP MEASURING INSTRUMENTS |
ISO 3029:1995
|
Photography 126-size cartridges Dimensions of cartridge, film and backing paper |
ISO 230-3:2007
|
Test code for machine tools Part 3: Determination of thermal effects |
I.S. EN ISO 12836:2015
|
DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
UNI EN ISO 13385-2 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
ISO 11312:2000
|
Photography Sheets of sensitized material for the pre-press industry Dimensions and related requirements |
IEC 62899-301-1:2017
|
Printed electronics - Part 301-1: Equipment - Contact printing - Rigid master - Measurement method of plate master external dimension |
ISO 14548:1998
|
Photography Dimensions of glass plates |
ISO 15872:2017
|
Aerospace — UNJ threads — Gauging |
BS EN ISO 14978:2006
|
Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment |
ISO 14978:2006
|
Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment |
ISO 1132-2:2001
|
Rolling bearings Tolerances Part 2: Measuring and gauging principles and methods |
ISO 26303:2012
|
Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
IEC 62899-301-2:2017
|
Printed electronics - Part 301-2: Equipment - Contact printing - Rigid master - Measurement method of plate master pattern dimension |
ISO 1008:1992
|
Photography — Paper dimensions — Pictorial sheets |
ISO 1938-2:2017
|
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
ASME B89.1.9 : 2002 : R2007
|
GAGE BLOCKS |
ASME B89.1.13 : 2013
|
Micrometers |
ASME B89.1.14:2018(R2023)
|
Calipers |
ASME B89.1.9 : 2002 : INC : ERR 1 : 2003 : R2007
|
GAGE BLOCKS |
ASME B89.1.9 : 2002 : INC : ERR 1 : 2002
|
GAGE BLOCKS |
ASME B89.1.5 : 1998 : R2014
|
MEASUREMENT OF PLAIN EXTERNAL DIAMETERS FOR USE AS MASTER DISCS OR CYLINDRICAL PLUG GAGES |
ASME B89.1.5 : 1998 : R2004
|
MEASUREMENT OF PLAIN EXTERNAL DIAMETERS FOR USE AS MASTER DISCS OR CYLINDRICAL PLUG GAGES |
ASME B89.1.9 : 2002 : INC : ERR 1 : 2003-12 : R2012
|
GAGE BLOCKS |