ISO 105-A02:1993

Current

Current The latest, up-to-date edition.

Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s):

Published date: 26-08-1993

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

Describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared. The essential scale (5 steps) consists of pairs of non-glossy grey colour chips (or swatches of grey cloth). In addition, an augmented scale includes four half-steps and, thus, 9 steps.

General Product Information - (Show below) - (Hide below)

Development Note	Also numbered as CGSB 4.2-46 (05/2001) Corrigendum 1 applies to French version only. (02/2002)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	ISO 105-A02:1987 ISO 105-A:1984

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
GOST R ISO 105-A02 : 1999	Identical
NF EN 20105 A02 : 1994	Identical
NEN ISO 105-A02 : 1994	Identical
NS ISO 105.A02 : 2ED 1994	Identical
I.S. EN 20105-A02:1995	Identical
SANS 105-A02 : 1ED 1993(R2012)	Identical
SAC GB 250 : 1995	Identical
SN EN 20105-A02 : 1994	Identical
AS 2001.4.A02-2005	Identical
SN ISO 105-A02:1984	Identical
NF ISO 105-A02 : 1988	Identical
BIS IS/ISO 105-A02 : 1993	Identical
UNE-EN 20105-A02:1998	Identical
BS EN 20105-A02:1995	Identical
EN 20105-A02 : 1994	Identical
DIN EN 20105-A02:1994-10	Identical
UNE 40132:1984	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 15836-2:2010-11	Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
ISO 17076:2006	Leather Physical and mechanical tests Determination of abrasion resistance of automotive leather
DIN EN ISO 19712-2:2013-04	Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
SAE J 1639 : 1995(S2017)	CLASSIFICATION SYSTEM FOR AUTOMOTIVE POLYAMIDE (PA) PLASTICS
DIN EN 13245-3:2010-11	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
05/30129295 DC : DRAFT FEB 2005	EN ISO 105-E05 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING - ACID
BS ISO 105-F04:2001	Textiles. Tests for colour fastness Specification for polyester adjacent fabric
11/30213807 DC : 0	BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION
DIN EN ISO 26082-2 E : 2012	LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD (ISO 26082-2:2012)
15/30322585 DC : 0	BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 14906:2012-08	Leather - Leather for automotive - Test methods and testing parameters
PREN 17142 : DRAFT 2017	MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
I.S. EN ISO 877:1997
BS ISO 11378-1:2000	Textile floor coverings. Laboratory soiling tests Kappasoil test
PREN 438-2 : DRAFT 2014	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
PD CEN/TS 16641:2014	Textile floor coverings. Guidelines for acceptable colour deviations
ISO 14486:2012	Laminate floor coverings — Specification
05/30132721 DC : DRAFT MAY 2005	ISO 20712-2 - WATER SAFETY SIGNS AND BEACH SAFETY FLAGS - PART 2: SPECIFICATIONS FOR BEACH SAFETY FLAGS - COLOUR, SHAPE, MEANING AND PERFORMANCE
06/30156314 DC : 0	BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
03/319410 DC : DRAFT NOV 2003	BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - METHOD OF TEST - ARTIFICIAL WEATHERING
BIS IS/ISO 105-E05 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID
BS ISO 11377:1998	Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation
I.S. EN ISO 105-B10:2011	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
ISO 11640:2012	Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing
DIN EN 15619 E : 2014	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
NF EN ISO 105 E07 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER
NF ISO 105-F05 : 2016	TEXTILES - TESTS FOR COLOUR FASTNESS - PART F05: SPECIFICATION FOR ACRYLIC ADJACENT FABRIC
BS 2782-5 Method 552A:1981	Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
16/30315125 DC : 0	BS EN ISO 15487 - TEXTILES - METHOD FOR ASSESSING APPEARANCE OF APPAREL AND OTHER TEXTILE END PRODUCTS AFTER DOMESTIC WASHING AND DRYING
DIN EN ISO 30023:2012-10	Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010)
DIN EN ISO 19712-2 E : 2013	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007)
DIN EN ISO 105-A11:2013-01	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES (ISO 105-A11:2012)
07/30160984 DC : 0	BS EN ISO 11643 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS OF SMALL SAMPLES TO SOLVENTS
BIS IS 12673-2 : 2014	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN
UNE-EN ISO 19712-2:2013	Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
I.S. EN ISO 17701:2016	FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR MIGRATION (ISO 17701:2016)
BS EN 16732:2015	Slide fasteners (zips). Specification
ISO 3865:2005	Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material
05/30133330 DC : DRAFT MAY 2005	ISO 4665 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO WEATHERING
BS ISO 14486:2012	Laminate floor coverings. Specification
08/30179495 DC : DRAFT MAR 2008	BS EN ISO 105-F09 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART F09: SPECIFICATION FOR COTTON RUBBING CLOTH
12/30262104 DC : 0	BS EN ISO 17228 - LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING
BS EN ISO 30013:2011	Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
10/30196552 DC : 0	BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
BS ISO 11758 : 1995 AMD 9708	RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE
10/30235106 DC : 0	BS EN ISO 11640 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING
BS EN 20105-A01:1993	Textiles. Tests for colour fastness General principles of testing
09/30196489 DC : 0	BS ISO 105-A11 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASNESS GRADES BY DIGITAL IMAGING TECHNIQUES
DIN EN 16732 E : 2016	SLIDE FASTENERS (ZIPS) - SPECIFICATION
10/30229900 DC : 0	BS EN ISO 17076-1 - LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD
BS PAS 66(2009) : 2009	OFFICIAL IDENTIFICATION EARTAGS FOR SHEEP AND GOATS - SPECIFICATION
BS EN ISO 26082-2:2012	Leather. Physical and mechanical test methods for the determination of soiling Tumbling method
13/30291069 DC : 0	BS EN 12608-1 - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
08/30179483 DC : DRAFT MAR 2008	BS EN ISO 105-F02 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART F02: SPECIFICATION FOR COTTON AND VISCOSE ADJACENT FABRICS
UNI EN 15836-2 : 2010	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
12/30212156 DC : 0	BS EN 13138-3:2007 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
BS ISO 105-F03:2001	Textiles. Tests for colour fastness Specification for polyamide adjacent fabric
BS ISO 9405 : 2015	TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
04/30126842 DC : DRAFT DEC 2004	EN ISO 105-B07 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH PERSPIRATION
07/30155372 DC : 0	BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
UNE 56875:2014	Kitchen furniture. Specifications, requirements, and test methods.
BS ISO 5912 : 2003 AMD 15519	CAMPING TENTS
09/30176542 DC : 0	BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
ISO 4665:2016	Rubber, vulcanized or thermoplastic — Resistance to weathering
DIN EN 16732:2016-05	SLIDE FASTENERS (ZIPS) - SPECIFICATION
ISO 20701:2017	Leather — Tests for colour fastness — Colour fastness to saliva
15/30321242 DC : 0	BS EN ISO 12870 - OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS
BIS IS/ISO 105-E06 : 2006	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI
I.S. EN ISO 3175-1:2018	TEXTILES - PROFESSIONAL CARE, DRYCLEANING AND WETCLEANING OF FABRICS AND GARMENTS - PART 1: ASSESSMENT OF PERFORMANCE AFTER CLEANING AND FINISHING (ISO 3175-1:2017)
BS EN 15619:2014	Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures
I.S. EN 15836-2:2010	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
CGSB 4.2-24 : 2002(R2013)	TEXTILE TEST METHODS - COLOURFASTNESS AND DIMENSIONAL CHANGE IN COMMERCIAL LAUNDERING
UNI EN ISO 105-G02 : 1999	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BURNT-GAS FUMES
ISO 105-F06:2000	Textiles Tests for colour fastness Part F06: Specification for silk adjacent fabric
UNE-EN ISO 30013:2012	Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
CGSB 4.2-18.3 : 1997(R2010)	TEXTILE TEST METHODS - TEXTILES - TESTS FOR COLOURFASTNESS - PART B02: COLOURFASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST
EN 14565:2004	Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification
ISO 7617-2:2003	Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
UNE-EN 16732:2016	Slide fasteners (zips) - Specification
ISO 2321:2017	Rubber threads — Methods of test
NF EN ISO 3175-1 : 2010	TEXTILES - PROFESSIONAL CARE, DRYCLEANING AND WETCLEANING OF FABRICS AND GARMENTS - PART 1: ASSESSMENT OF PERFORMANCE AFTER CLEANING AND FINISHING
BIS IS/ISO 105-A01 : 1994	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING
BIS IS/ISO 105-E13 : 1994	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E13: COLOUR FASTNESS TO ACID-FELTING: SEVERE
UNI ISO 2135 : 2011	ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
NF EN ISO 105 C08 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR
I.S. EN 15619:2014	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
UNE-EN 16436-1:2014	Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
EN ISO 20701:2018	Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2017)
EN ISO 105-C09:2003/A1:2007	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR
EN 1269:2015	Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test
I.S. EN ISO 17700:2005	FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING
BS EN ISO 12947-4 : 1999	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE
I.S. EN ISO 787-15:1996	GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 15: COMPARISON OF RESISTANCE TO LIGHT OF COLOURED PIGMENTS OF SIMILAR TYPES
EN ISO 105-B02:2014	Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014)
EN ISO 11378-2:2001/A1:2017	Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)
BS EN 13120 : 2009	INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN ISO 105-B06 E : 2004	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARC FADING LAMP TEST
DIN EN 13567:2007-09	PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS
DIN EN 13138-1:2015-02	Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
DIN EN 15330-2:2015-09 (Draft)	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
DIN EN ISO 105-C08 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR
DIN EN 13561:2015-08	EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN 13138-3:2015-02	Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn
DIN EN ISO 5470-1:2015-04 (Draft)	RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016)
DIN EN 13558:2003-12	SPECIFICATIONS FOR IMPACT MODIFIED EXTRUDED ACRYLIC SHEETS FOR SHOWER TRAYS FOR DOMESTIC PURPOSES
DIN EN ISO 19954 E : 2003	FOOTWEAR - TEST METHODS FOR WHOLE SHOE - WASHABILITY IN A DOMESTIC WASHING MACHINE
DIN EN ISO 12947-3:2007-04	Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998 + Cor. 1:2002) (includes Corrigendum AC:2006)
DIN EN ISO 105-C09 E : 2007	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR
UNE-EN ISO 105-E03:2010	Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010)
UNE-EN 12200-1:2017	Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
BS EN ISO 105-E08:1997	Textiles. Tests for colour fastness Colour fastness to hot water
BS EN 13559:2003	Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
BS EN ISO 105-N02:1995	Textiles. Tests for colour fastness Colour fastness to bleaching: Peroxide
BS EN ISO 105-S01:1996	Textiles. Tests for colour fastness Colour fastness to vulcanization. Hot air
UNE-EN ISO 105-G01:2017	Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016)
BS EN ISO 105-X13:1997	Textiles. Tests for colour fastness Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
UNE-EN 13138-1:2015	Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
BS EN ISO 105-G03:1997	Textiles. Tests for colour fastness Colour fastness to ozone in the atmosphere
BS EN ISO 105-B06:2004	Textiles. Tests for colour fastness Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
BS EN ISO 105-E02:2013	Textiles. Tests for colour fastness Colour fastness to sea water
BS EN ISO 5674:2009	Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
UNE-EN ISO 30023:2012	Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010)
BS EN ISO 105-C10:2007	Textiles. Tests for colour fastness Colour fastness to washing with soap or soap and soda
ISO 105-E01:2013	Textiles — Tests for colour fastness — Part E01: Colour fastness to water
ISO 12947-3:1998	Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss
BS EN 15330-2:2017	Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for needle-punched surfaces for tennis and multi-sport surfaces
BS EN ISO 105-D02:1996	Textiles. Tests for colour fastness Colour fastness to rubbing: Organic solvents
UNE-EN ISO 105-B01:2014	Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014)
ISO 12402-7:2006	Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS EN ISO 105-C06:2010	Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering
BS EN ISO 11758:1997	Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance
BS EN 20105-C04:1993	Textiles. Tests for colour fastness Colour fastness to washing: Test 4
BS EN ISO 105-P01:1995	Textiles. Tests for colour fastness Colour fastness to dry heat (excluding pressing)
UNE-EN ISO 105-E04:2013	Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013)
ISO 105-N01:1993	Textiles Tests for colour fastness Part N01: Colour fastness to bleaching: Hypochlorite
BS EN ISO 105-X05:1997	Textiles. Tests for colour fastness Colour fastness to organic solvents
BS EN ISO 105-E04:2013	Textiles. Tests for colour fastness Colour fastness to perspiration
DIN EN 15200:2007-08	SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
BS EN ISO 5774:2016	Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
BS EN 14465:2003	Textiles. Upholstery fabrics. Specification and methods of test
BS EN ISO 105-X04:1997	Textiles. Tests for colour fastness Colour fastness to mercerizing
UNE-EN ISO 105-D02:2016	Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:2016)
ISO 105-D01:2010	Textiles Tests for colour fastness Part D01: Colour fastness to drycleaning using perchloroethylene solvent
BS EN ISO 105-S03:1996	Textiles. Tests for colour fastness Colour fastness to vulcanization. Open steam
ISO 26082:2007	Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather
BS EN ISO 105-B04:1997	Textiles. Tests for colour fastness Colour fastness to artificial weathering. Xenon arc fading lamp test
BS EN ISO 105-E14:1997	Textiles. Tests for colour fastness Colour fastness to acid-felting. Mild
BS EN 20105-C01:1993	Textiles. Tests for colour fastness Colour fastness to washing: Test 1
BS EN ISO 105-B08 : 1999	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7
I.S. EN 1269:2015	TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST
I.S. EN 15330-1:2013	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
EN 12877-2:1999	Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
CEN/TS 16641:2014	Textile floor coverings - Guidelines for acceptable colour deviations
I.S. EN ISO 105-D02:2016	TEXTILES - TESTS FOR COLOUR FASTNESS - PART D02: COLOUR FASTNESS TO RUBBING: ORGANIC SOLVENTS (ISO 105-D02:2016)
DIN EN ISO 105-C08:2010-08	Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010)
DIN EN 14120:2007-09	PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS
EN 13558:2003	Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
DIN EN ISO 105-C09:2007-10	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR
EN ISO 5674:2009	Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
EN 13561:2015/AC:2016	EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN ISO 105-C06:2010-08	Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010)
EN 124-6:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
EN ISO 16871:2003	Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
DIN EN ISO 105-E16:2007-09	Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006)
UNI EN 13138-3 : 2015	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
EN 60684-2:2011	Flexible insulating sleeving - Part 2: Methods of test
EN 13546:2002+A1:2007	Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods
UNI EN ISO 30023 : 2012	TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED
DIN EN 15115:2007-03	Textile floor coverings - Determination of sensitivity to spilled water
EN 14906:2012	Leather - Leather for automotive - Test methods and testing parameters
DIN EN ISO 105-E09:2010-08	Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010)
DIN EN ISO 105-P02:2005-03	Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating (ISO 105-P02:2002)
DIN EN ISO 105-E06:2006-10	Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali
EN ISO 17700:2005	Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing (ISO 17700:2004)
EN 13516:2001/AC:2003	FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING
DIN EN ISO 5470-1:2017-04	RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016)
EN 1056 : 1996	METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
EN 13245-3:2010	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
EN 13567:2002+A1:2007	Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods
ONORM EN 13200-4 : 2006	SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
I.S. EN 13200-4:2006	SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
BS EN ISO 11640:2012	Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing
09/30194987 DC : 0	BS EN ISO 105-E07 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING BY WATER
12/30276397 DC : 0	BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY)
I.S. EN ISO 105-EO8:1997	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E08: COLOUR FASTNESS TO HOT WATER
05/30137367 DC : DRAFT JUL 2005	ISO 2321 - RUBBER THREADS - METHOD OF TEST
11/30241848 DC : 0	BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
ISO 3934:2002	Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods
14/30292311 DC : 0	BS EN ISO 105-G01 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART G01: COLOUR FASTNESS TO NITROGEN OXIDES
10/30229904 DC : 0	BS EN ISO 26082-1 - LEATHER - PHYSICAL AND MECHANICAL TESTS METHOD FOR DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD
UNE-EN 15836-1:2010	Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
07/30161895 DC : 0	BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
09/30194996 DC : 0	BS EN ISO 105-E03 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER)
I.S. EN 14327:2004	LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER
DIN EN ISO 105-B02 E : 2014	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014)
BS 7825-3.5:1997	Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties
BS ISO 4665:2016	Rubber, vulcanized or thermoplastic. Resistance to weathering
BS EN ISO 105-A11:2012	Textiles. Tests for colour fastness Determination of colour fastness grades by digital imaging techniques
14/30302452 DC : 0	BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
BS EN 14906:2012	Leather. Leather for automotive. Test methods and testing parameters
12/30254411 DC : 0	BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
BS EN ISO 25649-1:2017	Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods
BS 2782-5.550B(1996) : 1996 AMD 9494
DIN EN 12608-1 E : 2016	UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
BS ISO 105-G04:2016	Textiles. Tests for colour fastness Colour fastness to nitrogen oxides in the atmosphere at high humidities
15/30326242 DC : 0	BS EN 15330-2 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES
BS EN ISO 17701:2016	Footwear. Test methods for uppers, lining and insocks. Colour migration
12/30256977 DC : 0	BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
BS EN 15534-1 : 2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
DIN EN 124-6:2015-09	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
BS EN 12608-1:2016	Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods Non-coated PVC-U profiles with light coloured surfaces
08/30193639 DC : 0	BS EN ISO 105-C06 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING
BS EN ISO 105-B07:2009	Textiles. Tests for colour fastness Colour fastness to light of textiles wetted with artificial perspiration
14/30283961 DC : 0	BS ISO 18168 - TEXTILE FLOOR COVERINGS - COLOUR FASTNESS TO SHAMPOOING
BS EN 124-6:2015	Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
BS ISO 2135:2017	Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
08/30179029 DC : DRAFT MAR 2008	BS EN ISO 3758 - TEXTILES - CARE LABELLING CODE USING SYMBOLS
17/30361211 DC : 0	BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
03/103003 DC : DRAFT FEB 2003	ISO 105-C12 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING
09/30196481 DC : 0	BS ISO 105-B02 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST
UNI EN ISO 26082 : 2008	LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SOILING WITH RUBBING FOR AUTOMOTIVE LEATHER
BS ISO 19712-2 : 2007	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
NF ISO 105-F06 : 2016	TEXTILES - TESTS FOR COLOUR FASTNESS - PART F06: SPECIFICATION FOR SILK ADJACENT FABRIC
BS EN ISO 20471 : 2013	HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013)
14/30256340 DC : 0	BS EN ISO 12947-2 - TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN
ISO 105-F01:2001	Textiles — Tests for colour fastness — Part F01: Specification for wool adjacent fabric
06/30147348 DC : DRAFT MAR 2006	ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
06/30160006 DC : 0	BS EN ISO 11644 - LEATHER - TEST FOR ADHESION OF FINISH
I.S. EN ISO 105-G02:1997	TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES
DIN EN 13245-3 E : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
BS ISO 7617-1:2001	Plastics-coated fabrics for upholstery Specification for PVC-coated knitted fabrics
16/30324261 DC : 0	BS EN ISO 20701 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SALIVA
08/30181781 DC : DRAFT JULY 2008	BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
I.S. EN 16732:2015	SLIDE FASTENERS (ZIPS) - SPECIFICATION
08/30181778 DC : DRAFT JULY 2008	BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
IS 14452 : 2014	TEXTILES - CARE LABELLING CODE USING SYMBOLS
ISO 4582:2017	Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
DIN EN ISO 9405 E : 2017	TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015)
UNI CEN/TS 16641 : 2014	TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS
I.S. EN ISO 12870:2014	OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2016)
UNE-EN ISO 105-B10:2012	Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
ISO 26082-1:2012	Leather Physical and mechanical test methods for the determination of soiling Part 1: Rubbing (Martindale) method
I.S. EN 16436-1:2014	RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
ISO 105-F09:2009	Textiles Tests for colour fastness Part F09: Specification for cotton rubbing cloth
BIS IS 12673-3 : 2014	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 3: DETERMINATION OF MASS LOSS
BIS IS/ISO 105-E01 : 2010	TEXTILES - TESTS FOR COLOUR FATNESS - PART E01: COLOUR FASTNESS TO WATER
UNE-EN 124-6:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
UNE-EN ISO 105-A11:2013	Textiles - Tests for colour fastness - Part A11: Determination of colour fasness grades by digital imaging techniques (ISO 105-A11:2012)
ISO 18168:2015	Textile floor coverings Colour fastness to shampooing
DIN EN 438-2:2016-06	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
PREN 15330-1 : DRAFT 2013	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
UNE-EN ISO 3175-1:2010	Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2010)
PREN 513 : DRAFT 2017	PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
UNI EN ISO 11640 : 2013	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING
NFP 28 004 : 95 XP	CURTAIN-WALLING - PERFORMANCE REQUIREMENTS OF THE FINISHED WORK
UNI EN ISO 19712-3 : 2013	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
EN ISO 30023:2012	Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010)
EN ISO 105-G02:1997/AC:2009	TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES
UNI EN ISO 12870 : 2015	OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS
EN ISO 105-A01:2010	Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010)
NF EN ISO 5912 : 2011	CAMPING TENTS
EN ISO 105-E01:2013	Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013)
DIN EN 13200-4:2006-12	Spectator facilities - Part 4: Seats - Product characteristics
DIN EN ISO 105-P02 E : 2005	TEXTILES - TESTS FOR COLOUR FASTNESS - PART P02: COLOUR FASTNESS TO PLEATING: STEAM PLEATING
DIN EN ISO 105-B02:2014-11	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014)
DIN EN ISO 105-B01:2014-12	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT (ISO 105-B01:2014)
DIN EN ISO 105-B06:2004-07	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARC FADING LAMP TEST
DIN EN ISO 5674:2009-06	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
DIN EN 15115 E : 2007	TEXTILE FLOOR COVERINGS - DETERMINATION OF SENSITIVITY TO SPILLED WATER
DIN EN ISO 105-D01 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT
DIN EN 14565:2004-09	RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
DIN EN ISO 11378-2:2003-02	TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST (ISO 11378-2:2001 + AMD 1:2017)
ISO 105-X04:1994	Textiles Tests for colour fastness Part X04: Colour fastness to mercerizing
BS EN ISO 12402-7 : 2007	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 105-E10:1997	Textiles. Tests for colour fastness Colour fastness to decatizing
ISO 105-P01:1993	Textiles Tests for colour fastness Part P01: Colour fastness to dry heat (excluding pressing)
ISO 105-Z01:1993	Textiles Tests for colour fastness Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
BS EN 471 : 2003	HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
UNE-EN ISO 17228:2015	Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2015)
BS EN ISO 105-C08:2010	Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
BS EN 20105-C05:1993	Textiles. Tests for colour fastness Colour fastness to washing: Test 5
UNE-EN ISO 12947-2:2017	Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016)
BS EN ISO 105-B02:2014	Textiles. Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test
BS EN 13138-1:2008	Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn
BS EN 438-2 : 2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO 105-N03:1993	Textiles Tests for colour fastness Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
UNE-EN ISO 105-E01:2013	Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013)
BS EN ISO 5912:2011	Camping tents
BS EN ISO 105-A01:2010	Textiles. Tests for colour fastness General principles of testing
BS EN 13567 : 2002	PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS
ISO 105-Z02:1993	Textiles Tests for colour fastness Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
UNE-EN ISO 11641:2013	Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012)
DIN EN 15187 E : 2006	FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE
I.S. EN 13138-1:2014	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
I.S. EN 13138-2:2014	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
I.S. EN ISO 105-C08:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR
I.S. EN 14877:2013	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
I.S. EN 263:2008	SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
I.S. EN ISO 5470-1:2016	RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016)
I.S. EN ISO 105-C06:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING
I.S. EN ISO 15027-1:2012	IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-1:2012)
I.S. EN 13245-1:2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
I.S. EN ISO 11643:2009	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS OF SMALL SAMPLES TO SOLVENTS
I.S. EN ISO 105-E02:2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013)
I.S. EN 15330-2:2017	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
I.S. EN ISO 5774:2016	PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016)
I.S. EN ISO 105-B01:2014	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT (ISO 105-B01:2014)
I.S. EN 607:2004	EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
I.S. EN ISO 105-E01:2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013)
I.S. EN 13546:2002	PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS, AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 15027-2:2012	IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-2:2012)
I.S. EN ISO 11641:2012	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION (ISO 11641:2012)
I.S. EN ISO 12947-2:2016	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN (ISO 12947-2:2016)
I.S. EN ISO 14113:2013	GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
I.S. EN ISO 105-A01:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING
I.S. EN ISO 105-E09:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING
I.S. EN ISO 105-E12:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING
I.S. EN 12200-1:2016	PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 13138-3:2014	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
I.S. EN ISO 3758:2012	TEXTILES - CARE LABELLING CODE USING SYMBOLS (ISO 3758:2012)
I.S. EN ISO 11642:2012	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER (ISO 11642:2012)
I.S. EN 13567:2002	PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS
I.S. EN 14120:2003	PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 5674:2009	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
I.S. EN ISO 11644:2009	LEATHER - TEST FOR ADHESION OF FINISH
I.S. EN ISO 105-E04:2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION (ISO 105-E04:2013)
DIN EN ISO 26082:2008-03	LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SOILING WITH RUBBING FOR AUTOMOTIVE LEATHER
I.S. EN ISO 105-B02:2014	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014)
I.S. EN 13120:2009	INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
UNI EN ISO 12402-7 : 2011	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 105-E07:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER
I.S. EN 13561:2015	EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
I.S. EN ISO 105-G01:2016	TEXTILES - TESTS FOR COLOUR FASTNESS - PART G01: COLOUR FASTNESS TO NITROGEN OXIDES (ISO 105-G01:2016)
DIN EN ISO 105-E04:2013-08	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION (ISO 105-E04:2013)
DIN EN 1269:2016-02	TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST
I.S. EN ISO 105-E06:2006	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI
I.S. EN ISO 105-E05:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID
BS 2782-5:Method 552A:1999	Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS 903-A33:1985	Physical testing of rubber Methods of test for staining in contact with organic materials
BS 903-A33(1998) : 1998	PHYSICAL TESTING OF RUBBER - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL
ONORM EN ISO 11644 : 2009	LEATHER - TEST FOR ADHESION OF FINISH
CEI EN 62329-2 : 2007	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
DIN EN 15836-1:2010-11	Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
PREN 15330-2 : DRAFT 2015	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES
UNI EN ISO 17076-1 : 2012	LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD
BS ISO 105-F07:2001	Textiles. Tests for colour fastness Specification for secondary acetate adjacent fabric
I.S. EN ISO 20471:2013	HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013, CORRECTED VERSION 2013-06-01)
NF EN ISO 105 A01 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING
BS ISO 105-A08:2001	Textiles. Tests for colour fastness Vocabulary used in colour measurement
I.S. EN ISO 25649-1:2017	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017)
04/30113782 DC : DRAFT MAY 2004	ISO 3865 - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL
I.S. EN ISO 16871:2003	PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
BIS IS/ISO 105-E12 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING
10/30175254 DC : 0	BS ISO 5912 - CAMPING TENTS
PREN 13138-3 : DRAFT 2012	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
DIN EN 16436-1:2016-04	RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
13/30262917 DC : 0	BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
15/30313584 DC : 0	BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
BS ISO 27668-1:2017	Gel ink ball pens and refills General use
BS ISO 20712-2:2007	Water safety signs and beach safety flags Specifications for beach safety flags. Colour, shape, meaning and performance
DIN ISO 5912 E : 2004	CAMPING TENTS
BS ISO 27668-2:2009	Gel ink ball pens and refills Documentary use (DOC)
13/30262920 DC : 0	BS EN 14877 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATIONS
05/30132908 DC : DRAFT APR 2005	EN 15200 - SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
ISO 7617-1:2001	Plastics-coated fabrics for upholstery Part 1: Specification for PVC-coated knitted fabrics
BS ISO 2321:2017	Rubber threads. Methods of test
BIS IS/ISO 105-E16 : 2006	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS
ESPECIFICACION UNE 0059:2017	Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines
UNE-EN 15836-2:2010	Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
08/30176905 DC : DRAFT JAN 2008	BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
BS EN ISO 9405:2017	Textile floor coverings. Assessment of changes in appearance
DIN EN ISO 105-B07 E : 2009	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION
17/30332159 DC : 0	BS ISO 20739 - MARTIAL ARTS - WUSHU TAIJI CLOTHING - REQUIREMENTS AND TEST METHOD
08/30194094 DC : 0	BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
15/30315522 DC : 0	BS ISO 4586-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
06/30158081 DC : 0	BS EN ISO 105-E04 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION
BIS IS/ISO 105-F03 : 2001	TEXTILES - TESTS FOR COLOUR FASTNESS - PART F03: SPECIFICATION FOR POLYAMIDE ADJACENT FABRIC
09/30202125 DC : 0	BS ISO 105-E02 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER
DIN EN ISO 105-B01 E : 2014	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT (ISO 105-B01:2014)
09/30195823 DC : 0	BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT- FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
09/30194984 DC : 0	BS EN ISO 105-E01 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER
DIN EN ISO 30013:2012-03	Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
BS EN 15649-1 : 2009	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
ISO 105-B03:2017	Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposure
UNE-EN ISO 17701:2016	Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)
02/123737 DC : DRAFT OCT 2002	EN 1307 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF PILE CARPETS
DIN EN 124-6 E : 2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
02/121747 DC : DRAFT APR 2002	PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
06/30137509 DC : DRAFT MAR 2006	ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
ISO 12040:1997	Graphic technology Prints and printing inks Assessment of light fastness using filtered xenon arc light
UNE-EN ISO 9405:2017	Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015)
05/30128631 DC : DRAFT FEB 2005	EN ISO 105-E06 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06 - COLOUR FASTNESS TO SPOTTING - ALKALI
09/30194990 DC : 0	BS EN ISO 105-E09 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING
BS ISO 30023 : 2010	TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED
06/30156625 DC : DRAFT OCT 2006	BS EN ISO 105-B10 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON - ARC RADIATION
05/30128222 DC : DRAFT JAN 2005	ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
DIN EN 16436-1 E : 2016	RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
BS EN 60684-2:2011	Flexible insulating sleeving Methods of test
BS EN 20105-C06:1993	Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering
UNE-EN 12608-1:2016	Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
BS EN ISO 26082-1:2012	Leather. Physical and mechanical test methods for the determination of soiling Rubbing (Martindale) method
UNE-EN 15649-1:2010	Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
EN 438-2:2016	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
ISO 14145-2:1998	Roller ball pens and refills Part 2: Documentary use (DOC)
I.S. EN ISO 26082-2:2012	LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD (ISO 26082-2:2012)
I.S. EN ISO 30013:2011	RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
UNI EN ISO 26082-2 : 2012	LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD
I.S. EN ISO 9405:2017	TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015)
ISO 105-F05:2001	Textiles — Tests for colour fastness — Part F05: Specification for acrylic adjacent fabric
CGSB 4.2-29.1 : M89(R1997)	TEXTILE TEST METHODS - COLOURFASTNESS TO DRY CLEANING SOLVENT
EN ISO 3175-1:2018	Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017)
I.S. EN ISO 105-B03:2017	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B03: COLOUR FASTNESS TO WEATHERING: OUTDOOR EXPOSURE (ISO 105-B03:2017)
I.S. EN 124-6:2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
BIS IS/ISO 105-F04 : 2001	TEXTILES - TESTS FOR COLOUR FASTNESS - PART F04: SPECIFICATION FOR POLYESTER ADJACENT FABRIC
DIN EN ISO 12870:2015-07 (Draft)	OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2012)
BS EN ISO 12870:2014	Ophthalmic optics. Spectacle frames. Requirements and test methods
ISO/IEC 18745-1:2014	Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability)
I.S. EN 13245-3:2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
I.S. EN 15836-1:2010	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
17/30359853 DC : 0	BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
SAE J 2642 : 2017	RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
ISO 105-G04:2016	Textiles Tests for colour fastness Part G04: Colour fastness to nitrogen oxides in the atmosphere at high humidities
PREN 1471 : DRAFT 2014	TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
ASTM D 6322 : 2015 : REDLINE	Standard Guide to International Test Methods Associated with Textile Care Procedures
UNI EN 13245-3 : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
SAE J 322 : 2014	NONMETALLIC TRIM MATERIALS - TEST METHOD FOR DETERMINING THE STAINING RESISTANCE TO HYDROGEN SULFIDE GAS
EN ISO 11640:2012	Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012)
UNI ISO 3865 : 2010	RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL
UNI EN 14906 : 2012	LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS
DIN EN ISO 20471:2013-09	HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013, CORRECTED VERSION 2013-06-01 + AMD 1:2016)
DIN EN ISO 17700:2005-12	FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING
UNE-EN ISO 11640:2013	Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012)
ISO 105-F07:2001	Textiles — Tests for colour fastness — Part F07: Specification for secondary acetate adjacent fabric
ISO 105-F04:2001	Textiles — Tests for colour fastness — Part F04: Specification for polyester adjacent fabric
ISO 27668-1:2017	Gel ink ball pens and refills — Part 1: General use
BS EN 1269 : 1997	TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST
ISO 3175-1:2017	Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1: Assessment of performance after cleaning and finishing
ISO 11643:2009	Leather Tests for colour fastness Colour fastness of small samples to solvents
ISO 105-F03:2001	Textiles — Tests for colour fastness — Part F03: Specification for polyamide adjacent fabric
DIN EN 13120:2014-09	INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN 471:2008-03	HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
DIN EN ISO 14113:2014-02	GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
DIN EN 14565 E : 2004	RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
DIN EN ISO 105-E05 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID
DIN EN ISO 105-E12 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING
DIN EN ISO 105-E06 E : 2006	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI (ISO 105-E06:2006)
DIN EN ISO 3758:2013-12	Textiles - Care labelling code using symbols (ISO 3758:2012)
DIN EN 14877 E : 2013	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
EN 13138-3:2014	Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn
BS EN 20105-N01:1995	Textiles. Tests for colour fastness Colour fastness to bleaching: hypochlorite
UNE-EN ISO 15027-1:2013	Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
UNE-EN ISO 105-E02:2013	Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013)
BS EN 12877-4:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by two-roll milling
ISO 105-S03:1993	Textiles Tests for colour fastness Part S03: Colour fastness to vulcanization: Open steam
UNE-EN ISO 105-E07:2010	Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010)
IEC 62329-2:2006	Heat-shrinkable moulded shapes - Part 2: Methods of test
BS EN ISO 105-N04:1995	Textiles. Tests for colour fastness Colour fastness to bleaching: Sodium chlorite (severe)
ISO 105-B07:2009	Textiles Tests for colour fastness Part B07: Colour fastness to light of textiles wetted with artificial perspiration
ISO 105-N05:1993	Textiles Tests for colour fastness Part N05: Colour fastness to stoving
BS EN ISO 105-X06:1997	Textiles. Tests for colour fastness Colour fastness to soda boiling
BS EN ISO 3758:2012	Textiles. Care labelling code using symbols
BS EN ISO 105-N05:1995	Textiles. Tests for colour fastness Colour fastness to stoving
ISO 105-E04:2013	Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration
UNE-EN ISO 105-E12:2010	Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010)
BS EN ISO 105-C12:2006	Textiles. Tests for colour fastness Colour fastness to industrial laundering
BS EN 12608:2003	Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods
BS EN 1471:1997	Textile floor coverings. Assessment of changes in appearance
ISO 105-C12:2004	Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering
ISO 15702:1998	Leather — Tests for colour fastness — Colour fastness to machine washing
BS EN ISO 105-E05:2010	Textiles. Tests for colour fastness Colour fastness to spotting. Acid
ISO 105-E07:2010	Textiles Tests for colour fastness Part E07: Colour fastness to spotting: Water
ISO 877:1994	Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
ISO 5912:2011	Camping tents
BS EN ISO 105-E13:1997	Textiles. Tests for colour fastness Colour fastness to acid-felting. Severe
BS EN ISO 105-D01:2010	Textiles. Tests for colour fastness Colour fastness to dry cleaning using perchloroethylene solvent
DIN EN 14877:2013-12	Synthetic surfaces for outdoor sports areas - Specification
UNE-EN 13138-2:2015	Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
ISO 105-B05:1993	Textiles Tests for colour fastness Part B05: Detection and assessment of photochromism
I.S. EN ISO 12402-7:2006	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN 12608-1 : 2016	UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
EN ISO 105-B06 : 2004	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARC FADING LAMP TEST
EN ISO 12402-7:2006/A1:2011	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN ISO 12947-3:1998/AC:2006	Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998/Cor.1:2002)
EN 20105-C05 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 5
EN ISO 105-E10 : 1996	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E10: COLOUR FASTNESS TO DECATIZING
EN ISO 26082:2007	Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather (ISO 26082:2007)
EN 20105-C03 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 3
EN 15836-1:2010	Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
UNI EN 15187 : 2007	FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE
UNI EN ISO 105-D01 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT
UNI EN 15330-1 : 2013	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
UNI EN ISO 15027-1 : 2012	IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
UNI EN ISO 105-E01 : 2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER
UNI EN ISO 105-E05 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID
UNI EN 471 : 2008	HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
UNI EN ISO 105-E02 : 2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER
UNI EN ISO 105-B02 : 2014	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST
UNI EN 13245-1 : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
UNI EN ISO 11644 : 2009	LEATHER - TEST FOR ADHESION OF FINISH
UNI EN ISO 11642 : 2013	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER
BS 5790-1:1996	Coated fabrics for upholstery Specification for PVC-coated knitted fabrics
UNI EN ISO 5674 : 2009	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE- OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
UNI EN ISO 14113 : 2013	GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA)
EN ISO 19954:2003	Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003)
UNI EN ISO 105-C08 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR
UNI EN ISO 105-B08 : 2009	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7
UNI EN ISO 105-B01 : 2014	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT
UNI EN 13120 : 2014	INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
UNI EN ISO 105-E03 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER)
UNI EN ISO 15027-2 : 2012	IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
UNI EN ISO 11641 : 2013	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION
UNI EN ISO 12947-3 : 2000	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - DETERMINATION OF MASS LOSS
UNI EN 263 : 2008	SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
UNI EN ISO 105-C06 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING
UNI EN ISO 105-E12 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING
UNI EN 14877 : 2013	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
UNI EN ISO 12947-4 : 2000	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - ASSESSMENT OF APPEARANCE CHANGE
UNI EN ISO 105-A01 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING
UNI EN ISO 11643 : 2009	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS OF SMALL SAMPLES TO SOLVENTS
EN ISO 17228:2015	LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING (ISO 17228:2015)
EN 607:2004	Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
UNI EN 15619 : 2014	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
UNI EN ISO 105-E07 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER
UNI EN ISO 105-E04 : 2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION
UNI EN ISO 3758 : 2012	TEXTILES - CARE LABELLING CODE USING SYMBOLS
UNI EN ISO 105-E09 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING
UNI EN 15200 : 2007	SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
UNE-EN ISO 12870:2014	Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2012)
BS EN ISO 19712-2:2013	Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods
BS 903-A54:1989	Physical testing of rubber Methods for exposure to artificial light, for use in determining resistance to weathering
BIS IS/ISO 105-E07 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER
BIS IS/ISO 105-E02 : 1994	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER
ISO 20712-2:2007	Water safety signs and beach safety flags Part 2: Specifications for beach safety flags Colour, shape, meaning and performance
14/30303794 DC : 0	BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS ISO 17228:2005	Leather. Tests for colour fastness. Change in colour with accelerated ageing
15/30317619 DC : 0	BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER
I.S. EN ISO 26082:2007	LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SOILING WITH RUBBING FOR AUTOMOTIVE LEATHER
BS ISO 105-F09:2009	Textiles. Tests for colour fastness Specification for cotton rubbing cloth
BS ISO 105-F06:2000	Textiles. Tests for colour fastness Specification for silk adjacent fabric
BS ISO 105-F02:2009	Textiles. Tests for colour fastness Specification for cotton and viscose adjacent fabrics
I.S. EN ISO 105-BO4:1997	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ARTIFICIAL WEATHERING: XENON ARC FADING LAMP TEST
I.S. EN ISO 17076-1:2012	LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD (ISO 17076-1:2012)
UNI EN 15836-1 : 2010	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
UNI EN ISO 30013 : 2011	RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
BS EN 20105-B02:1993	Textiles. Tests for colour fastness Colour fastness artificial light (xenon arc fading lamp test)
NF EN ISO 105 E03 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER)
NF EN ISO 105 E05 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID
UNI EN ISO 105-B10 : 2012	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION
10/30235110 DC : 0	BS EN ISO 11641 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION
BS EN 15836-1:2010	Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
DIN EN ISO 9405:2016-10 (Draft)	TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015)
I.S. EN 60684-2:2011	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
BS ISO 105-F10 : 1989	TEXTILES - TESTS FOR COLOUR FASTNESS - PART F10: SPECIFICATION FOR ADJACENT FABRIC: MULTIFIBRE
BS EN ISO 30023:2012	Textiles. Qualification symbols for labelling workwear to be industrially laundered
12/30254414 DC : 0	BS EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
BS ISO 105-B06 : 1998 AMD 15161	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES - XENON ARC FADING LAMP TEST
I.S. EN ISO 105-C10:2007	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA
BS ISO 19712-3 : 2007	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
10/30196548 DC : 0	BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
BS EN 13245-3:2010	Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles
PREN 14877 : DRAFT 2013	SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATIONS
BS ISO 105-C09 : 2001 AMD 15184	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING. OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR
BS EN ISO 17076-1:2012	Leather. Determination of abrasion resistance Taber method
DIN EN ISO 17228:2015-06	LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING (ISO 17228:2015)
NF EN ISO 105 B01 : 2014	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT
13/30272871 DC : 0	BS ISO 9405 - TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
07/30137506 DC : 0	BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS
ISO 14145-1:2017	Roller ball pens and refills — Part 1: General use
BS EN 62329-2:2006	Heat shrinkable moulded shapes Methods of test
DIN EN 15649-1:2014-06	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
09/30196680 DC : 0	BS ISO 30023 - TEXTILES - CARE LABELLING CODE USING SYMBOLS FOR WORKWEAR TO BE INDUSTRIALLY LAUNDERED
BS EN 13329 : 2016	LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
BS ISO 12040:1997	Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light
16/30296872 DC : 0	BS ISO 10256-5 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 5: NECK LACERATION PROTECTORS FOR ICE HOCKEY PLAYERS
05/30136339 DC : DRAFT JUL 2005	EN ISO 105-E16 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS
16/30333706 DC : 0	BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
BS PAS 44(2014) : 2014	OFFICIAL IDENTIFICATION EARTAGS FOR CATTLE - SPECIFICATION
DIN EN ISO 20701:2016-10 (Draft)	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SALIVA (ISO/DIS 20701:2016)
08/30176450 DC : DRAFT JAN 2008	BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE
BS ISO 18168:2015	Textile floor coverings. Colour fastness to shampooing
BS EN ISO 17228:2015	Leather. Tests for colour fastness. Change in colour with accelerated ageing
14/30292296 DC : 0	BS ISO 105-G04 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART G04: COLOUR FASTNESS TO NITRIC OXIDE IN THE ATMOSPHERE AT HIGH HUMIDITIES
07/30158827 DC : 0	BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
DIN EN ISO 105-B10:2012-01	Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
10/30235114 DC : 0	BS EN ISO 11642 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER
05/30131435 DC : DRAFT MAR 2005	EN ISO 105-C10 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA
DD CEN/TS 15256:2005	Protective clothing. Hand, arm, leg, genital and neck protectors for use in ice hockey. Protectors for players other than goalkeepers. Requirements and test methods
UNE-EN 438-2:2016	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
02/123818 DC : DRAFT OCT 2002	BS EN 14565 - RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
UNI EN ISO 105-B07 : 2009	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION
06/30154487 DC : 0	EN 263 - SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
BIS IS/ISO 105-E09 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING
BIS IS/ISO 105-F01 : 2001	TEXTILES - TESTS FOR COLOUR FASTNESS - PART F01: SPECIFICATION FOR WOOL ADJACENT FABRIC
BS ISO 3865:2005	Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
UNI EN 15649-1 : 2014	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN ISO 26082-1:2012	LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD (ISO 26082-1:2012)
PREN ISO 15027-1 : DRAFT 2010	IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
EN 16436-1:2014+A1:2015	RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
I.S. EN ISO 105-A08:2002	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A08: VOCABULARY USED IN COLOUR MEASUREMENT
I.S. EN ISO 19712-3:2013	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007)
I.S. EN 438-2:2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
NF EN ISO 105 B10 : 2011	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION
ISO 2135:2017	Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
I.S. EN ISO 105-A11:2012	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES
ISO 21924-1:2017	Protective equipment for martial arts — Part 1: General requirements and test methods
BS ISO/IEC 18745-1:2014	Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability)
CGSB 4.2-31 : 2004(R2013)	TEXTILE TEST METHODS - TEXTILES - TESTS FOR COLOURFASTNESS - PART X11: COLOURFASTNESS TO HOT PRESSING
ISO 12757-2:1998	Ball point pens and refills Part 2: Documentary use (DOC)
EN 13329:2016+A1:2017	Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
I.S. EN ISO 17228:2015	LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING (ISO 17228:2015)
ISO 105-F10:1989	Textiles Tests for colour fastness Part F10: Specification for adjacent fabric: Multifibre
I.S. EN ISO 11640:2012	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING (ISO 11640:2012)
I.S. EN ISO 105-B07:2009	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION
ISO 17076-1:2012	Leather Determination of abrasion resistance Part 1: Taber method
DIN EN ISO 105-E16 E : 2007	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS
DIN EN ISO 15027-2:2013-03	Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
DIN EN ISO 105-E02 E : 2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013)
DIN EN ISO 105-C10 E : 2007	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA
DIN EN 607:2005-02	Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
DIN EN 13546:2007-09	PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS, AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 15027-1:2013-03	Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
DIN EN ISO 105-E03 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER)
DIN EN ISO 105-E01 E : 2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013)
DIN EN ISO 105-E07 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER
BS EN 20105-C03:1993	Textiles. Tests for colour fastness Colour fastness to washing: Test 3
BS EN ISO 105-E07:2010	Textiles. Tests for colour fastness Colour fastness to spotting. Water
UNE-EN ISO 105-C08:2010	Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010)
BS EN ISO 105-C09:2003	Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering. Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
BS EN ISO 105-E06:2006	Textiles. Tests for colour fastness Colour fastness to spotting. Alkali
ISO 105-S02:1993	Textiles Tests for colour fastness Part S02: Colour fastness to vulcanization: Sulfur monochloride
ISO 15700:1998	Leather — Tests for colour fastness — Colour fastness to water spotting
BS EN ISO 105-X02:1996	Textiles. Tests for colour fastness Colour fastness to carbonizing: Sulfuric acid
BS EN 14120 : 2003	PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS
ISO 105-C03:1989	Textiles Tests for colour fastness Part C03: Colour fastness to washing: Test 3
BS EN 607:2004	Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN ISO 105-C07:2001	Textiles. Tests for colour fastness Colour fastness to wet scrubbing of pigment dyed or pigment printed textiles
ISO 19954:2003	Footwear Test methods for whole shoe Washability in a domestic washing machine
ISO 105-Z06:1998	Textiles Tests for colour fastness Part Z06: Evaluation of dye and pigment migration
ISO 105-C08:2010	Textiles Tests for colour fastness Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
ISO 105-C09:2001	Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
EN ISO 5912:2011	Camping tents (ISO 5912:2011)
BS EN ISO 5470-1:2016	Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader
BS EN ISO 105-E12:2010	Textiles. Tests for colour fastness Colour fastness to milling. Alkaline milling
ISO 105-E06:2006	Textiles Tests for colour fastness Part E06: Colour fastness to spotting: Alkali
DIN EN ISO 105-E04:2013-08	Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013)
ISO 105-A11:2012	Textiles — Tests for colour fastness — Part A11: Determination of colour fastness grades by digital imaging techniques
ISO 17701:2016	Footwear Test methods for uppers, lining and insocks Colour migration
BS EN 13558:2003	Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
BS EN 13138-2:2014	Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be held
BS EN 263:2008	Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
UNE-EN 13138-3:2015	Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn
BS EN ISO 105-S02:1996	Textiles. Tests for colour fastness Colour fastness to vulcanization: Sulfur monochloride
BS EN 13277-1:2000	Protective equipment for martial arts General requirements and test methods
BS EN ISO 105-B01:2014	Textiles. Tests for colour fastness Colour fastness to light: Daylight
ISO 787-15:1986	General methods of test for pigments and extenders Part 15: Comparison of resistance to light of coloured pigments of similar types
DIN EN 13245-1 E : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
DIN EN 15334 E : 2007	SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT
ISO 105-B10:2011	Textiles — Tests for colour fastness — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
BS EN 12200-1:2016	Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
DIN EN 15200 E : 2007	SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
BS EN 14565:2004	Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification
BS EN ISO 105-P02:2004	Textiles. Tests for colour fastness Colour fastness to pleating. Steam pleating
UNE-EN ISO 20471:2013	High visibility clothing - Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)
BS EN 12877-2:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by injection moulding
DIN EN 13245-1:2010-11	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
UNE-EN ISO 14113:2013	Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
ISO 105-N04:1993	Textiles Tests for colour fastness Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
BS EN ISO 105-G01:2016	Textiles. Tests for colour fastness Colour fastness to nitrogen oxides
ISO 105-E08:1994	Textiles Tests for colour fastness Part E08: Colour fastness to hot water
ISO 14113:2013	Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
ISO 17228:2015	Leather Tests for colour fastness Change in colour with accelerated ageing
UNE-EN ISO 5912:2012	Camping tents (ISO 5912:2011)
BS EN 15200:2007	Sanitary appliances. Multifunction shower cabinets
ISO 105-E10:1994	Textiles Tests for colour fastness Part E10: Colour fastness to decatizing
BS EN ISO 105-E16:2007	Textiles. Tests for colour fastness Colour fastness to water spotting on upholstery fabrics
ISO 5470-1:2016	Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader
ISO 105-A08:2001	Textiles — Tests for colour fastness — Part A08: Vocabulary used in colour measurement
UNE-EN ISO 105-A01:2010	Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010)
ISO 105-B01:2014	Textiles Tests for colour fastness Part B01: Colour fastness to light: Daylight
ISO 105-E02:2013	Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water
ISO 30023:2010	Textiles Qualification symbols for labelling workwear to be industrially laundered
ISO 15027-2:2012	Immersion suits Part 2: Abandonment suits, requirements including safety
ISO 3758:2012	Textiles — Care labelling code using symbols
IEC 60684-2:2011	Flexible insulating sleeving - Part 2: Methods of test
ISO 16871:2003	Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
BS EN ISO 15703:1999	Leather. Tests for colour fastness. Colour fastness to mild washing
ISO 11642:2012	Leather — Tests for colour fastness — Colour fastness to water
ISO 105-X13:1994	Textiles Tests for colour fastness Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
ISO 105-X05:1994	Textiles Tests for colour fastness Part X05: Colour fastness to organic solvents
ISO 105-S01:1993	Textiles Tests for colour fastness Part S01: Colour fastness to vulcanization: Hot air
ISO 105-X14:1994	Textiles Tests for colour fastness Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
ISO 17700:2004	Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing
ISO 5674:2004	Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria
DIN EN ISO 105-E01:2013-06	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013)
BS EN ISO 105-E03:2010	Textiles. Tests for colour fastness Colour fastness to chlorinated water (swimming-pool water)
BS EN ISO 105-N03:1995	Textiles. Tests for colour fastness Colour fastness to bleaching: Sodium chlorite (mild)
BS EN ISO 19954:2003	Footwear. Test methods for whole shoe. Washability in a domestic washing machine
BS EN 13245-1:2010	Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles
ISO 9405:2015	Textile floor coverings — Assessment of changes in appearance
ISO 105-E16:2006	Textiles Tests for colour fastness Part E16: Colour fastness to water spotting on upholstery fabrics
ISO 105-E03:2010	Textiles Tests for colour fastness Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 20471:2013	High visibility clothing — Test methods and requirements
BS EN 13561:2015	External blinds and awnings. Performance requirements including safety
ISO 105-P02:2002	Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleating
ISO 105-X11:1994	Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing
ISO 105-C10:2006	Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda
BS EN ISO 11644:2009	Leather. Test for adhesion of finish
ISO 105-X06:1994	Textiles Tests for colour fastness Part X06: Colour fastness to soda boiling
BS EN 12877-3:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by oven test
ISO 105-N02:1993	Textiles Tests for colour fastness Part N02: Colour fastness to bleaching: Peroxide
UNE-EN ISO 105-E09:2010	Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010)
ISO 105-B02:2014	Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 12947-2:2016	Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
ISO 15027-1:2012	Immersion suits Part 1: Constant wear suits, requirements including safety
ISO 105-C07:1999	Textiles Tests for colour fastness Part C07: Colour fastness to wet scrubbing of pigment printed textiles
ISO 105-E12:2010	Textiles Tests for colour fastness Part E12: Colour fastness to milling: Alkaline milling
ISO 19712-3:2007	Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes
BS EN ISO 17700:2005	Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing
BS EN 14327:2003	Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather
UNE-EN ISO 105-C06:2010	Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010)
BS EN ISO 15027-1:2012	Immersion suits Constant wear suits, requirements including safety
BS EN 15330-1:2013	Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use
ISO 19712-2:2007	Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods
UNI EN ISO 5912 : 2011	CAMPING TENTS
BS EN ISO 11641:2012	Leather. Tests for colour fastness. Colour fastness to perspiration
BS EN ISO 105-X14:1997	Textiles. Tests for colour fastness Colour fastness to acid chlorination of wool. Sodium dichloroisocyanurate
ISO 105-E09:2010	Textiles Tests for colour fastness Part E09: Colour fastness to potting
UNE-EN 13329:2016	Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
DIN EN ISO 105-E02:2013-06	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013)
BS EN ISO 105-X07:1997	Textiles. Tests for colour fastness Colour fastness to cross-dyeing. Wool
DIN EN ISO 105-D01:2010-10	Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent (ISO 105-D01:2010)
BS EN ISO 12947-2:2016	Textiles. Determination of the abrasion resistance of fabrics by the Martindale method Determination of specimen breakdown
BS EN 20105-C02:1993	Textiles. Tests for colour fastness Colour fastness to washing: Test 2
ISO 105-B04:1994	Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 11641:2012	Leather — Tests for colour fastness — Colour fastness to perspiration
BS EN ISO 15700:1999	Leather. Tests for colour fastness. Colour fastness to water spotting
UNE-EN ISO 5774:2016	Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
ISO 105-E05:2010	Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid
BS EN ISO 105-X09:1996	Textiles. Tests for colour fastness Colour fastness to formaldehyde
UNE-EN ISO 11642:2013	Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012)
BS EN ISO 105-Z01:1996	Textiles. Tests for colour fastness Colour fastness to metals in the dye-bath: chromium salts
ISO 105-C02:1989	Textiles Tests for colour fastness Part C02: Colour fastness to washing: Test 2
UNE-EN ISO 105-B02:2014	Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014)
BS EN ISO 11642:2012	Leather. Tests for colour fastness. Colour fastness to water
ISO 105-G03:1993	Textiles Tests for colour fastness Part G03: Colour fastness to ozone in the atmosphere
ISO 105-C05:1989	Textiles — Tests for colour fastness — Part C05: Colour fastness to washing: Test 5
DIN EN 15334:2007-05	Sanitary appliances - Methacrylic dispersions of high filler content
ISO 105-C04:1989	Textiles Tests for colour fastness Part C04: Colour fastness to washing: Test 4
I.S. EN ISO 105-D01:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRYCLEANING USING PERCHLOROETHYLENE SOLVENT
DIN EN ISO 20471:2017-03	HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013, CORRECTED VERSION 2013-06-01 + AMD 1:2016)
DIN EN ISO 105-E07:2010-08	Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010)
EN ISO 105-N03 : 1995	TEXTILES - TESTS FOR COLOUR - FASTNESS - PART N03: COLOUR FASTNESS TO BLEACHING - SODIUM CHLORITE (MILD) (ISO 105-N03:1993)
EN 15334:2007	Sanitary appliances - Methacrylic dispersions of high filler content
EN 15330-1:2013	Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use
EN 20105-N01 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BLEACHING: HYPOCHLORITE (ISO 105-N01:1993)
EN 20105-C06 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING
EN 15200:2007/AC:2009	SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
EN 14327 : 2003	LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER
EN ISO 105-B01:2014	Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014)
EN ISO 105-E09:2010	Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010)
EN ISO 105-S02 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ANIZATION: SULFUR MONOCHLORIDE
EN ISO 105-X02 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CARBONIZING: SULPHURIC ACID
EN 15330-2:2017	Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces
EN ISO 105-E13 : 1996	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ACID-FELTING: SEVERE
EN ISO 105-P02 : 2004	Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating (ISO 105-P02:2002)
EN ISO 105-Z01 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO METALS IN THE DYE-BATH: CHROMIUM SALTS (ISO 105-Z01:1993)
EN 14120:2003+A1:2007	Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods
EN ISO 26082-2:2012	Leather - Physical and mechanical test methods for the determination of soiling - Part 2: Tumbling method (ISO 26082-2:2012)
EN 20105-C01 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 1
EN ISO 105-X09 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO FORMALDEHYDE
EN ISO 12947-4:1998/AC:2006	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE
EN 15115:2006	Textile floor coverings - Determination of sensitivity to spilled water
EN ISO 105-Z06 : 2000	TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z06: EVALUATION OF DYE AND PIGMENT MIGRATION
EN 14877:2013	Synthetic surfaces for outdoor sports areas - Specification
EN ISO 19712-2:2013	Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
EN ISO 877 : 1996
EN ISO 105-X01 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CARBONIZING - ALUMINIUM CHLORIDE (ISO 105-X01:1993)
EN ISO 105-X08 : 1997	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DEGUMMING
EN ISO 105-E08 : 1996	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E08: COLOUR FASTNESS TO HOT WATER
EN ISO 105-B05 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - DETECTION AND ASSESSMENT OF PHOTOCHROMISM
EN ISO 15700:1999	Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998)
EN ISO 9405:2017	Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015)
EN ISO 11642:2012	Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012)
EN ISO 11644:2009	Leather - Test for adhesion of finish (ISO 11644:2009)
EN ISO 15027-1:2012	Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
EN ISO 105-X14 : 1997	TEXTILES - TESTS FOR COLOUR FASTNESS - PART X14: COLOUR FASTNESS TO ACID CHLORINATION OF WOOL: SODIUM DICHLOROISOCYANURATE
EN ISO 105-G01:2016	Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016)
EN ISO 105-D02:2016	Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:2016)
EN ISO 12947-2:2016	Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016)
EN ISO 787-15:1995	GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 15: COMPARISON OF RESISTANCE TO LIGHT OF COLOURED PIGMENTS OF SIMILAR TYPES
EN ISO 20471:2013/A1:2016	HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013/AMD 1:2016)
EN 1471:1996/A1:2003	TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
EN ISO 105-A11:2012	Textiles - Tests for colour fastness - Part A11: Determination of colour fastness grades by digital imaging techniques (ISO 105-A11:2012)
EN 15619:2014	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
EN ISO 105-N05 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO STOVING (ISO 105-N05:1993)
EN ISO 105-E06:2006/AC:2007	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI
EN ISO 105-X13 : 1997	Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994)
EN 15649-1:2009+A2:2013	Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
EN ISO 30013:2011	Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
EN ISO 105-B04:1997	Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994)
EN ISO 105-C07 : 2001	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C07: COLOUR FASTNESS TO WET SCRUBBING OF PIGMENT PRINTED TEXTILES
EN ISO 19712-3:2013	Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
EN ISO 11641:2012	Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012)
EN 14465:2003/A1:2006	TEXTILES - UPHOLSTERY FABRICS - SPECIFICATION AND METHODS OF TEST
EN ISO 105-P01 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DRY HEAT (EXCLUDING PRESSING)
EN ISO 105-B07:2009	Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration (ISO 105-B07:2009)
EN ISO 15027-2:2012	Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
EN ISO 105-C06:2010	Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010)
EN 15187:2006	FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE
EN ISO 105-D01:2010	Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent (ISO 105-D01:2010)
EN ISO 105-N04 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BLEACHING - SODIUM CHLORITE (SEVERE)
EN 15836-2:2010	Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
EN ISO 11643:2009	Leather - Tests for colour fastness - Colour fastness of small samples to solvents (ISO 11643:2009)
EN ISO 15703:1999	Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998)
EN ISO 105-X05 : 1997	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ORGANIC SOLVENTS
EN 20105-B02 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ARTIFICIAL LIGHT (XENON ARC FADING LAMP TEST)
EN 16732:2015	Slide fasteners (zips) - Specification
EN ISO 105-E16:2007	Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006)
EN ISO 11758:1997/AC:1998	RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE
EN ISO 105-G03 : 1997	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO OZONE IN THE ATMOSPHERE
EN ISO 105-E07:2010	Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010)
EN 20105-C04 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 4
EN ISO 105-X11:1996	Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing (ISO-X11:1994)
EN ISO 105-S01 : 1995	Textiles - Tests for colour fastness - Part S01: Colour fastness to vulcanization: Hot air (ISO 105-S01/1993)
EN ISO 15702:1999	Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998)
EN 471:2003+A1:2007	High-visibility warning clothing for professional use - Test methods and requirements
EN ISO 3758:2012	Textiles - Care labelling code using symbols (ISO 3758:2012)
EN ISO 105-X06 : 1997	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SODA BOILING
EN 263:2008	Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
EN ISO 105-E02:2013	Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013)
EN ISO 105-C08:2010	Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010)
EN ISO 105-S03 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO VULCANIZATION : OPEN STEAM (ISO 105-S03:1993)
EN ISO 105-X07 : 1997	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CROSS-DYEING: WOOL
EN ISO 105-E12:2010	Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010)
EN ISO 105-N02 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - PART N02: COLOUR FASTNESS TO BLEACHING - PEROXIDE (ISO 105-N02:1993)
EN ISO 105-E03:2010	Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010)
EN 20105-A01 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - GENERAL PRINCIPLES OF TESTING
EN ISO 105-B08:1999/A1:2009	Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 - Amendment 1 (ISO 105-B08:1995/Amd 1:2009)
EN ISO 105-E14 : 1996	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ACID-FELTING: MILD
EN ISO 105-E05:2010	Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO 105-E05:2010)
EN ISO 105-C12:2006/AC:2007	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING
EN ISO 105-A08:2002	Textiles - Tests for colour fastness - Part A08: Vocabulary used in colour measurement (ISO 105-A08:2001)
EN ISO 105-X04 : 1997	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MERCERIZING
EN ISO 5470-1:2016	Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
EN ISO 105-E04:2013	Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013)
EN ISO 105-Z02 : 1995	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO METALS IN THE DYE-BATH: IRON AND COPPER
EN ISO 105-B10:2011	Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
EN ISO 5774:2016	Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
EN 20105-C02 : 1992	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 2
EN ISO 14113:2013	Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
EN ISO 105-C10:2007	Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-C10:2006)
BIS IS/ISO 105-E04 : 2008	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION
UNI EN ISO 26082-1 : 2012	LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD
ONORM EN ISO 12402-7 : 2015	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011)
09/30199086 DC : DRAFT JAN 2009	BS EN ISO 105-C08 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR
BS EN ISO 19712-3:2013	Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes
16/30315531 DC : 0	BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES
I.S. EN 15534-1:2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
UNE-EN ISO 17076-1:2012	Leather - Determination of abrasion resistance - Part 1: Taber method (ISO 17076-1:2012)
12/30261644 DC : 0	BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE
DIN EN ISO 105-B10 E : 2012	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
DIN EN ISO 26082-2:2012-10	LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD (ISO 26082-2:2012)
I.S. EN ISO 11758:1998	RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE
BS EN ISO 105-B10:2011	Textiles. Tests for colour fastness Artificial weathering. Exposure to filtered xenon-arc radiation
DIN EN ISO 105-A08 E : 2003	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A08: VOCABULARY USED IN COLOUR MEASUREMENT
CEI EN 60684-2 : 2012	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
DIN EN 15619:2014-07	RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
BS EN 15836-2:2010	Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
I.S. EN ISO 30023:2012	TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED (ISO 30023:2010)
BIS IS 12673-4 : 2014	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE
08/30190352 DC : DRAFT SEP 2008	BS EN ISO 105-D01 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT
NF EN ISO 105 D01 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT
BS 903-A55:1989	Physical testing of rubber Methods for assessment of changes in properties after exposure to natural weathering or artificial light, for use in determining resistance to weathering
UNE-EN ISO 26082-1:2012	Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)
NF EN ISO 105 C06 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING
NF EN ISO 105 E09 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING
UNI EN ISO 19712-2 : 2013	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
UNE-ISO 4582:2014	Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS ISO 105-F05:2001	Textiles. Tests for colour fastness Specification for acrylic adjacent fabric
BS ISO 4582:2017	Plastics. Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
08/30189974 DC : DRAFT DEC 2008	BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
BIS IS/ISO 105-F02 : 2009	TEXTILES - TESTS FOR COLOUR FASTNESS - PART F02: SPECIFICATION FOR COTTON AND VISCOSE ADJACENT FABRICS
ISO 11377:1997	Textile floor coverings Floor soiling Test site set-up and soiling evaluation
10/30200375 DC : 0	BS EN ISO 20471 - HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
BS ISO 105-C08 : 2001 AMD 14165	TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR
BS 903-A53:1989	Physical testing of rubber Methods for exposure to natural weathering, for use in determining resistance to weathering
14/30302995 DC : 0	BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION
PREN ISO 15027-2 : DRAFT 2010	IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
UNE-EN 13245-3:2011	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
PREN 13138-2 : DRAFT 2012	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
I.S. EN 14906:2012	LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS
06/30148736 DC : 0	EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
08/30176454 DC : DRAFT JAN 2008	BS EN ISO 27668-2 - GEL INK BALL PENS AND REFILLS - PART 2: DOCUMENTARY USE (DOC)
ISO 27668-2:2009	Gel ink ball pens and refills Part 2: Documentary use (DOC)
DIN EN ISO 30023 E : 2012	TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED (ISO 30023:2010)
UNI EN ISO 105-A11 : 2013	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES
DIN EN ISO 19712-3:2013-09	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007)
I.S. EN 62329-2:2006	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
DIN ISO 20712-2:2008-08	WATER SAFETY SIGNS AND BEACH SAFETY FLAGS - PART 2: SPECIFICATIONS FOR BEACH SAFETY FLAGS - COLOUR, SHAPE, MEANING AND PERFORMANCE
I.S. CEN TS 15256:2005	PROTECTIVE CLOTHING - HAND, ARM, LEG, GENITAL AND NECK PROTECTORS FOR USE IN ICE HOCKEY - PROTECTORS FOR PLAYERS OTHER THAN GOALKEEPERS - REQUIREMENTS AND TEST METHODS
UNE-EN 14906:2012	Leather - Leather for automotive - Test methods and testing parameters
ISO 11378-1:2000	Textile floor coverings Laboratory soiling tests Part 1: Kappasoil test
ISO 4586-2:2015	High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties
I.S. EN 12608-1:2016	UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
EN ISO 12870:2018	Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2016)
ONORM EN ISO 105-G02 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES
I.S. EN 13329:2016	LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
UNE-EN ISO 19712-3:2013	Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
PREN 13561 : DRAFT 2014	EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
BS EN ISO 105-G02:1997	Textiles. Tests for colour fastness Colour fastness to burnt-gas fumes
I.S. EN 15649-1:2009	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
ISO 12757-1:2017	Ball point pens and refills — Part 1: General use
DIN EN ISO 11640:2013-02	LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING (ISO 11640:2012)
BIS IS/ISO 105-E03 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER)
EN ISO 26082-1:2012	Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)
NF EN ISO 105 E12 : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING
I.S. EN ISO 19712-2:2013	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007)
BS EN 16436-1 : 2014	RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
S.R. CEN/TS 16641:2014	TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS
DIN EN ISO 26082-1:2012-07	LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD (ISO 26082-1:2012)
EN ISO 105-B03:2017	Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017)
ISO 105-F02:2009	Textiles Tests for colour fastness Part F02: Specification for cotton and viscose adjacent fabrics
EN ISO 25649-1:2017	Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)
EN ISO 17076-1:2012	Leather - Determination of abrasion resistance - Part 1: Taber method (ISO 17076-1:2012)
BS EN 13120:2009+A1:2014	Internal blinds. Performance requirements including safety
DIN EN ISO 12402-7:2015-08 (Draft)	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 105-C12 E : 2006	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING
DIN EN ISO 12947-4:2007-04	Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006)
DIN EN 15330-1:2013-12	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
DIN EN 14327 E : 2004	LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER
DIN EN ISO 105-B08 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7
DIN EN 12200-1:2016-10	PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 105-C06 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING
DIN EN 13138-2:2015-02	Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
DIN EN 13559:2003-12	SPECIFICATIONS FOR IMPACT MODIFIED COEXTRUDED ABS/ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
DIN EN ISO 105-E09 E : 2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING
UNE-EN ISO 105-B08:2001	TEXTILES. TESTS FOR COLOUR FASTNESS. PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7. (ISO 105-B08:1995)
ISO 30013:2011	Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties
UNE-EN 13245-1:2011	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
BS EN ISO 105-B05:1996	Textiles. Tests for colour fastness Detection and assessment of photochromism
ISO 105-C01:1989	Textiles Tests for colour fastness Part C01: Colour fastness to washing: Test 1
UNE-EN ISO 105-D01:2010	Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent (ISO 105-D01:2010)
BS EN ISO 105-Z02:1996	Textiles. Tests for colour fastness Colour fastness to metals in the dye-bath. Iron and copper
BS EN 12877-1:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics General introduction
BS EN 13199-3:2000	Packaging. Small load carrier systems Bond Stackable System (BSS)
BS EN ISO 105-X01:1996	Textiles. Tests for colour fastness Colour fastness to carbonizing: Aluminium chloride
BS EN ISO 26082:2007	Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather
ISO 105-A01:2010	Textiles Tests for colour fastness Part A01: General principles of testing
BS EN ISO 11378-2 : 2001	TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST
UNE-EN ISO 5470-1:2017	Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
BS EN 13200-4:2006	Spectator facilities Seats. Product characteristics
BS EN ISO 11643:2009	Leather. Tests for colour fastness. Colour fastness of small samples to solvents
ISO 105-B08:1995	Textiles — Tests for colour fastness — Part B08: Quality control of blue wool reference materials 1 to 7
BS EN ISO 12947-3 : 1999	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 3: DETERMINATION OF MASS LOSS
ISO 105-B06:1998	Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
BS EN 13516:2002	Footwear. Test methods for uppers, lining and insocks. Colour fastness to rubbing
ISO 105-G01:2016	Textiles Tests for colour fastness Part G01: Colour fastness to nitrogen oxides
BS EN ISO 105-X11:1996	Textiles. Tests for colour fastness Colour fastness to hot pressing
ISO 105-X08:1994	Textiles Tests for colour fastness Part X08: Colour fastness to degumming
I.S. EN ISO 5912:2011	CAMPING TENTS (ISO 5912:2011)
BS EN ISO 105-X08:1997	Textiles. Tests for colour fastness Colours fastness to degumming
ISO 105-C06:2010	Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering
ISO 11644:2009	Leather — Test for adhesion of finish
BS EN ISO 105-E09:2010	Textiles. Tests for colour fastness Colour fastness to potting
BS EN ISO 15702:2000	Leather. Tests for colour fastness. Colour fastness to machine washing
ISO 11378-2:2001	Textile floor coverings — Laboratory soiling tests — Part 2: Drum test
BS EN 15334:2007	Sanitary appliances. Methacrylic dispersions of high filler content
BS EN ISO 16871:2003	Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
ISO 5774:2016	Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
BS EN 15115:2006	Textile floor coverings. Determination of sensitivity to spilled water
BS EN ISO 105-E01:2013	Textiles. Tests for colour fastness Colour fastness to water
UNE-EN ISO 15027-2:2013	Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
BS EN ISO 14113:2013	Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
ISO 105-X09:1993	Textiles Tests for colour fastness Part X09: Colour fastness to formaldehyde
ISO 12947-4:1998	Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change
ISO 105-D02:2016	Textiles Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents
BS EN 13546 : 2002	PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS
BS EN ISO 15027-2:2012	Immersion suits Abandonment suits, requirements including safety
BS EN 15187:2006	Furniture. Assessment of the effect of light exposure
BS EN 13138-3:2014	Buoyant aids for swimming instruction Safety requirements and test methods for swim seats to be worn
BS EN 14877:2013	Synthetic surfaces for outdoor sports areas. Specification
ISO 15703:1998	Leather — Tests for colour fastness — Colour fastness to mild washing
ISO 26082-2:2012	Leather — Physical and mechanical test methods for the determination of soiling — Part 2: Tumbling method
EN 12200-1:2016	Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
DIN EN ISO 5912:2013-08	CAMPING TENTS (ISO 5912:2011)
EN 13559:2003	Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
EN 13138-1:2014	Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
DIN EN ISO 105-C12:2006-04	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING
UNI EN 13138-2 : 2015	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
I.S. EN ISO 105-E03:2010	TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER)
EN 13138-2:2014	Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
DIN EN 471:2003-12	HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
DIN EN ISO 9405:2017-09	TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015)
DIN EN ISO 105-E05:2010-12	Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO 105-E05:2010)
DIN EN ISO 11642:2013-02	Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012)
EN 62329-2:2006	Heat shrinkable moulded shapes - Part 2: Methods of test
DIN EN 15187:2006-12	Furniture - Assessment of the effect of light exposure
DIN ISO 5912:2004-05	CAMPING TENTS
EN 12608:2003	Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
EN 13200-4:2006	Spectator facilities - Part 4: Seats - Product characteristics
DIN EN ISO 105-E03:2010-08	Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010)
CEN/TS 15256:2005	Protective clothing - Hand, arm, leg, genital and neck protectors for use in ice hockey - Protectors for players other than goalkeepers - Requirements and test methods
EN ISO 17701:2016	Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)
DIN EN 263:2008-06	Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
DIN EN ISO 105-A01:2010-05	Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010)
I.S. EN ISO 12947-4:1999	TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE
DIN EN ISO 11643:2009-10	Leather - Tests for colour fastness - Colour fastness of small samples to solvents (ISO 11643:2009)
DIN EN ISO 105-B07:2009-10	Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration (ISO 105-B07:2009)
DIN EN ISO 105-E12:2010-08	Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010)
DIN EN ISO 11641:2013-02	Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012)
DIN EN ISO 105-B08:2010-02	Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 (ISO 105-B08:1995 + Amd 1:2009) (includes Amendment A1:2009)
DIN EN 12608-1:2016-08	UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
DIN EN ISO 19954:2003-12	FOOTWEAR - TEST METHODS FOR WHOLE SHOE - WASHABILITY IN A DOMESTIC WASHING MACHINE
DIN EN ISO 17076-1:2012-06	LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD (ISO 17076-1:2012)
DIN EN ISO 105-C10:2007-06	Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-C10:2006)
DIN EN 14327:2004-03	LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER
DIN EN 15330-2:2017-09	SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
UNI EN 13138-1 : 2014	BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
EN 13245-1:2010	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
DIN EN ISO 11644:2009-09	Leather - Test for adhesion of finish (ISO 11644:2009)
DIN EN ISO 105-A08:2003-01	TEXTILES - TESTS FOR COLOUR FASTNESS - PART A08: VOCABULARY USED IN COLOUR MEASUREMENT
BS 7619:2010	Extruded cellular unplasticized white PVC (PVC-UE) profiles. Specification
I.S. EN ISO 105-C12:2006	TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account