Skip to content
Please enter a keyword to search

  • ISO 13935-1:2014

    Current The latest, up-to-date edition.

    Textiles Seam tensile properties of fabrics and made-up textile articles Part 1: Determination of maximum force to seam rupture using the strip method

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  18-03-2014

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 13935-1:2014 specifies a procedure to determine the seam maximum force of sewn seams when the force is applied perpendicularly to the seam. ISO 13935-1:2014 specifies the method known as the strip test.

    The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment . It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns (see Bibliography).

    The sewn fabrics may be obtained from previously sewn articles or may be prepared from fabric samples, as agreed by the parties interested in the results.

    This method is applicable to straight seams only and not to curved seams.

    The method is restricted to the use of constant rate of extension (CRE) testing machines.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/FDIS 13935-1. (03/2014)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN 4416 : 200P1 AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - WIDE WOVEN FABRICS - TECHNICAL SPECIFICATION
    BS EN ISO 13935-2:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the grab method
    UNE-EN ISO 13934-2:2014 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
    I.S. EN ISO 13935-2:2014 TEXTILES - TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014)
    I.S. EN ISO 13934-2:2014 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014)
    I.S. EN ISO 13934-1:2013 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013)
    06/30130308 DC : 0 ISO 23560 - PLASTICS - FILM AND SHEETING - POLYPROPYLENE WOVEN SACKS FOR BULK PACKAGING OF EDIBLE COMMODITIES
    DIN EN ISO 13934-2:2014-06 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014)
    DIN EN ISO 13934-1:2013-08 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013)
    UNE-EN ISO 13935-2:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
    UNE-EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
    BS EN ISO 13937-4:2000 Textiles. Tear properties of fabrics Determination of tear force of tongue-shaped test specimens (double tear test)
    I.S. EN ISO 14460:1999 PROTECTIVE CLOTHING FOR AUTOMOBILE RACING DRIVERS - PROTECTION AGAINST HEAT AND FLAME - PERFORMANCE REQUIREMENTS AND TEST METHODS
    UNI EN ISO 13934-2 : 2014 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD
    UNI EN ISO 13935-2 : 2014 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD
    UNI EN ISO 13934-1 : 2013 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD
    17/30353382 DC : 0 BS EN 17092-1 - PROTECTIVE GARMENTS FOR MOTORCYCLE RIDERS - PART 1: TEST METHODS
    DIN EN ISO 13935-2:2014-07 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014)
    ISO 13934-2:2014 Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method
    ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
    BS EN ISO 13937-2:2000 Textiles. Tear properties of fabrics Determination of tear force of trouser-shaped test specimens (single tear method)
    ISO 13935-2:2014 Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
    ISO 13937-3:2000 Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
    ISO 14460:1999 Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods
    ISO 13937-4:2000 Textiles — Tear properties of fabrics — Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
    BS EN ISO 13934-2:2014 Textiles. Tensile properties of fabrics Determination of maximum force using the grab method
    BS EN 4416:2006 Aerospace series. Non-metallic materials. Textiles. Wide woven fabrics. Technical specification
    BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics Determination of maximum force and elongation at maximum force using the strip method
    BS EN ISO 14460:1999 Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
    BS EN ISO 13937-3:2000 Textiles. Tear properties of fabrics Determination of tear force of wing-shaped test specimens (single tear method)
    EN ISO 13937-4 : 2000 TEXTILES - TEAR PROPERTIES OF FABRICS - PART 4: DETERMINATION OF TEAR FORCE OF TONGUE-SHAPED TEST SPECIMENS (DOUBLE TEAR TEST) (ISO 13937-4:2000)
    EN 4416:2006 Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification
    EN ISO 13937-2 : 2000 TEXTILES - TEAR PROPERTIES OF FABRICS - PART 2: DETERMINATION OF TEAR FORCE OF TROUSER-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD) (ISO 13937-2:2000)
    EN ISO 13934-2:2014 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
    EN ISO 14460:1999/A1:2002 PROTECTIVE CLOTHING FOR AUTOMOBILE RACING DRIVERS - PROTECTION AGAINST HEAT AND FLAME - PERFORMANCE REQUIREMENTS AND TEST METHODS
    EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
    EN ISO 13937-3 : 2000 TEXTILES - TEAR PROPERTIES OF FABRICS - PART 3: DETERMINATION OF TEAR FORCE OF WING-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD) (ISO 13937-3:2000)
    EN ISO 13935-2:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
    17/30353385 DC : 0 BS EN 17092-2 - PROTECTIVE GARMENTS FOR MOTORCYCLE RIDERS - PART 2: HEAVY-DUTY PROTECTIVE GARMENTS - REQUIREMENTS
    ISO 23560:2015 Woven polypropylene sacks for bulk packaging of foodstuffs
    DIN EN ISO 13935-2:1999-04 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014)
    DIN EN ISO 13934-2:1999-04 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
    ISO 13934-2:2014 Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method
    EN 10002-2 : 1991 METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE
    ISO 13935-2:2014 Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
    ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
    ISO 139:2005 Textiles Standard atmospheres for conditioning and testing
    ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
    AS 4967:2019 Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective