|
BS ISO 17268 : 2012
|
GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
|
BS ISO 5892:2013
|
Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification |
|
ISO 9679:2006
|
Aerospace Clamps for fluid systems Test methods |
|
DIN EN ISO 17268:2016-02 (Draft)
|
GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
|
99/123581 DC : DRAFT OCT 1999
|
ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
|
09/30181563 DC : 0
|
BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
|
BS ISO 17324:2014
|
Rubber hoses for automotive turbochargers. Specification |
|
BS ISO 12991:2012
|
Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles |
|
ONORM EN 15807 : 2011
|
RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
|
EN ISO 18797-1:2017
|
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
|
ISO 19003:2006
|
Rubber and rubber products — Guidance on the application of statistics to physical testing |
|
BS ISO 24453:2008
|
Rubber. Acquisition and presentation of comparable single-point data |
|
09/30208429 DC : 0
|
BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
|
01/122577 DC : DRAFT JUNE 2001
|
BS EN 1765 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
|
VDE 0212-2 : 1999
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
|
05/30133330 DC : DRAFT MAY 2005
|
ISO 4665 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO WEATHERING |
|
NF ISO 4141-1 : 2000
|
ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
|
BS ISO 28017:2009
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification |
|
02/204831 DC : DRAFT APR 2002
|
IEC 60505. ED. 3.0 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
|
13/30266235 DC : 0
|
BS ISO 17325-1 - SHIPS AND MARINE TECHNOLOGY - MARINE ENVIRONMENT PROTECTION - OIL BOOMS - PART 1: DESIGN REQUIREMENTS |
|
15/30315879 DC : 0
|
BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
|
15/30278562 DC : 0
|
BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
|
12/30269005 DC : 0
|
BS EN 1844 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
|
BS ISO 24454:2008
|
Rubber. Acquisition and presentation of comparable multi-point data |
|
BS EN 14840:2005
|
Joint fillers and sealants. Test methods for preformed joint seals |
|
BS ISO 4927:2005
|
Road vehicles. Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120°C max.) |
|
99/104927 DC : DRAFT JUN 1999
|
PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS |
|
BS ISO 9631:2018
|
Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
|
CSA NGV1 : 2017
|
COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
|
UNI EN 15649-7 : 2010
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
|
03/312144 DC : DRAFT JULY 2003
|
ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
|
EN 15129:2018 (edition 2)
|
Anti-seismic devices |
|
ISO 28017:2018
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification |
|
BS ISO 13985:2006
|
Liquid hydrogen. Land vehicle fuel tanks |
|
UNE-EN 50467:2012
|
Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
|
ISO 1431-3:2017
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
|
I.S. EN ISO 18797-1:2017
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
|
ISO 12619-2:2014
|
Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods |
|
17/30328799 DC : 0
|
BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
|
ISO 1823:2015
|
Rubber hose and hose assemblies for oil suction and discharge service Specification |
|
I.S. EN 50467:2011
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
|
UNE-EN 15649-7:2010
|
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
|
UNE-EN 16678:2016
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
I.S. EN 14382:2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
ISO 21809-3:2016
|
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
|
DIN EN 14241-1:2013-11
|
CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
|
DIN EN 14382 E : 2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
BS EN 1844:2013
|
Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing |
|
BS EN 12806:2003
|
Automotive liquefied petroleum gas components. Other than containers |
|
BS EN 1765:2004
|
Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
|
BS EN 681-2:2000
|
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
|
BS EN 14241-1:2013
|
Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners |
|
UNE-ISO 4141-1:2016
|
Road vehicles. Multi-core connecting cables. Part 1: Test methods and requirements for basic performance sheathed cables |
|
BS EN 14382 : 2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
BS EN ISO 6807:2003
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications |
|
BS EN 681-1:1996
|
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
|
BS EN 13760:2003
|
Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions |
|
DIN EN ISO 7326:2017-03
|
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
|
EN 60684-2:2011
|
Flexible insulating sleeving - Part 2: Methods of test |
|
I.S. EN 13760:2003
|
AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS |
|
EN 60505:2011/AC:2017-03
|
EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017) |
|
EN 12806:2003
|
Automotive liquefied petroleum gas components - Other than containers |
|
EN 1123-1:1999/A1:2004
|
PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL |
|
DIN EN ISO 17268:2017-03
|
GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
|
NBR 15880 : 2010
|
DUCTILE IRON FITTINGS AND ACCESSORIES FOR PIPES OF PVC 6,3 AND POLIETILENE PE - REQUIREMENTS |
|
NBR 15803 : 2010 ERRATA 2010
|
PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR MECHANICAL JOINT COMPRESSION FITTINGS, BRANCH SADDLES AND TAPPING TEE FOR POLYETHYLENE (PE) PIPES FOR NOMINAL OUTSIDE DIAMETERS BETWEEN 20 MM AND 160 MM, WITH MAXIMUM OPERATION PRESSURE UP TO 1.6 MPA |
|
11/30194638 DC : 0
|
BS ISO 12991 - LIQUEFIED NATURAL GAS (LNG) - TRANSPORTABLE TANKS FOR USE ON BOARD VEHICLES |
|
15/30313602 DC : 0
|
BS ISO 25649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
|
03/308001 DC : DRAFT JUNE 2003
|
ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
|
99/716445 DC : DRAFT NOV 99
|
AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR |
|
BS ISO 4665:2016
|
Rubber, vulcanized or thermoplastic. Resistance to weathering |
|
18/30347942 DC : DRAFT APR 2018
|
BS ISO 20766-9 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 9: PRESSURE RELIEVE DEVICE (PRD) |
|
17/30293100 DC : 0
|
BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
|
BS ISO 18797-1 : 2016 COR 2017
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
|
PREN 681-1 : DRAFT 2016
|
ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
|
17/30347933 DC : 0
|
BS ISO 20766-4 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PART 4: LEVEL INDICATOR |
|
I.S. EN ISO 7326:2016
|
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS |
|
03/301511 DC : DRAFT JAN 2003
|
ISO 4141-1 - ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
|
CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013
|
CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012 |
|
NF ISO 3011 : 2009
|
RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO OZONE CRACKING UNDER STATIC CONDITIONS |
|
14/30266729 DC : 0
|
BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION |
|
BIS IS/ISO 13985 : 2006
|
LIQUID HYDROGEN - LAND VEHICLES FUEL TANKS |
|
17/30347930 DC : 0
|
BS ISO 20766-3 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 3: 80% STOP VALVE |
|
CSA Z62.1 : 2015
|
CHAIN SAWS |
|
14/30301115 DC : 0
|
BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
|
XP D36 112 : 2000 XP
|
HOUSEHOLD ECONOMY - (REINFORCED) FLEXIBLE RUBBER TUBING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING BUTANE OR PROPANE FROM CYLINDERS OR INDIVIDUAL TANKS |
|
17/30334044 DC : 0
|
BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
|
10/30167702 DC : 0
|
BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
|
BS ISO 17357-2:2014
|
Ships and marine technology. Floating pneumatic rubber fenders Low pressure |
|
11/30250546 DC : 0
|
BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
|
CEI EN 50467 : 2013
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
|
PREN 549 : DRAFT 2017
|
RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
|
PREN 50467 : DRAFT 2009
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
|
I.S. EN 15129:2009
|
ANTI-SEISMIC DEVICES |
|
07/30161672 DC : 0
|
BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
|
PREN 14241-1 : DRAFT 2011
|
CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
|
BS ISO 16380 : 2014
|
ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
|
BS ISO 13628-10 : 2005 AMD 16775
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
|
NF EN 61854 : 2001
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
|
DIN EN 15807:2011-05
|
Railway applications - Pneumatic half couplings |
|
API 17L1 : 2013
|
SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
|
NF EN 60684-2 : 2012
|
FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
|
ISO 6916-2:2001
|
Flexible cellular polymeric materials Sponge and expanded cellular rubber products Specification Part 2: Mouldings and extrusions |
|
ISO 3011:1997
|
Rubber- or plastics-coated fabrics Determination of resistance to ozone cracking under static conditions |
|
ISO 17357-2:2014
|
Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure |
|
I.S. EN 60505:2011
|
EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
|
ANSI PRD 1 : 2013(R2018)
|
PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS |
|
ASTM D 4575 : 2009 : R2015
|
Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers |
|
BIS IS 15957 : 2012
|
ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) SPECIFIC EQUIPMENT - GENERAL DESIGN REQUIREMENTS, PERFORMANCE AND TEST METHODS |
|
UNE-EN ISO 7326:2017
|
Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
|
CEI EN 61854 : 2000
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
|
BS ISO 12619-2 : 2014
|
ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
|
ISO 25649-7:2017
|
Floating leisure articles for use on and in the water Part 7: Additional specific safety requirements and test methods for Class E devices |
|
NF EN 15807 : 2011
|
RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
|
ANSI NGV3.1 : 2014
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
|
ISO 9631:2018
|
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
|
ISO 4632-1:1982
|
Rubber, vulcanized Classification Part 1: Description of the classification system |
|
DIN EN 1337-3:2005-07
|
Structural bearings - Part 3: Elastomeric bearings |
|
UNE-EN 421:2010
|
Protective gloves against ionizing radiation and radioactive contamination |
|
UNE-EN 1765:2017
|
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
|
BS EN 421:2010
|
Protective gloves against ionizing radiation and radioactive contamination |
|
EN 61854:1998
|
Overhead lines - Requirements and tests for spacers |
|
DIN EN 681-1:2006-11
|
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
|
EN 15807:2011
|
Railway applications - Pneumatic half couplings |
|
I.S. EN 421:2010
|
PROTECTIVE GLOVES AGAINST IONIZING RADIATION AND RADIOACTIVE CONTAMINATION |
|
I.S. EN 1844:2013
|
FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
|
I.S. EN ISO 6807:2004
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
|
I.S. EN 14241-1:2013
|
CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
|
I.S. EN 13787:2002
|
ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
DIN EN 13760:2003-11
|
Automotive LPG filling system for light and heavy duty vehicles - Nozzle; Test requirements and dimensions |
|
I.S. EN 1765:2016
|
RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
|
DIN EN 681-3:2006-11
|
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber |
|
DIN EN 1844:2013-08
|
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing |
|
DIN EN 681-2:2006-11
|
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
|
I.S. EN 12806:2003
|
AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
|
BS 903-A44:1995
|
Physical testing of rubber Method of determination of resistance to ozone cracking (dynamic strain test) |
|
UNE-EN ISO 28017:2012
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011) |
|
ANSI NGV1 : 2017
|
COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
|
BS EN 15807:2011
|
Railway applications. Pneumatic half couplings |
|
03/118042 DC : DRAFT NOV 2003
|
EN 14840 - JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
|
07/30083514 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
|
ISO 3934:2002
|
Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods |
|
07/30169250 DC : 0
|
BS EN 421 - PROTECTIVE GLOVES AGAINST IONIZING RADIATION AND RADIOACTIVE CONTAMINATION |
|
UNI EN 15807 : 2011
|
RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
|
05/30137842 DC : DRAFT AUG 2005
|
ISO 9679 - AEROSPACE - CLAMPS FOR FLUID SYSTEMS - TEST METHODS |
|
18/30347939 DC : DRAFT APR 2018
|
BS ISO 20766-6 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 6: PRESSURE RELIEF VALVES (PRV) |
|
BS ISO 6446:1994
|
Rubber products. Bridge bearings. Specification for rubber materials |
|
NFD 36 100 : 1999
|
HOUSEHOLD ECONOMY - (WITHOUT FORCED) FLEXIBLE RUBBER TUBING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS DISTRIBUTED BY NETWORKS |
|
12/30235141 DC : 0
|
BS ISO 5892 - RUBBER BUILDING GASKETS - MATERIALS FOR PREFORMED SOLID VULCANIZED STRUCTURAL GASKETS - SPECIFICATION |
|
UNE-EN ISO 17268:2017
|
Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012) |
|
08/30176905 DC : DRAFT JAN 2008
|
BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
|
08/30190043 DC : DRAFT SEP 2008
|
BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
|
BS ISO 14409 : 2013
|
SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS |
|
DD CLC/TS 50467:2008
|
Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
|
04/102832 DC : DRAFT JAN 2004
|
ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS |
|
BS ISO 6916-1:1995
|
Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification Sheeting |
|
BS EN 60684-2:2011
|
Flexible insulating sleeving Methods of test |
|
02/121978 DC : DRAFT APR 2002
|
ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS |
|
07/30161675 DC : 0
|
BS ISO 24454 - PHYSICAL TESTING OF RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE MULTI-POINT DATA |
|
BS ISO 3011:1997
|
Rubber- or plastics-coated fabrics. Determination of resistance to ozone cracking under static conditions |
|
BS 903-4:2003
|
Physical testing of rubber Acquisition and presentation of comparable multi-point data |
|
DIN EN 549:1995-04
|
RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
|
UNE-EN 15807:2011
|
Railway applications - Pneumatic half couplings |
|
NF ISO 14409 : 2011
|
SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS |
|
ISO 4665:2016
|
Rubber, vulcanized or thermoplastic — Resistance to weathering |
|
API SPEC 17K : 2017
|
SPECIFICATION FOR BONDED FLEXIBLE PIPE |
|
I.S. EN ISO 28017:2018
|
RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018) |
|
ANSI HPRD 1 : 2013(R 2018)
|
THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
|
I.S. EN 61854:1999
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
|
ISO 9553:1997
|
Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors |
|
ISO 15500-2:2016
|
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods |
|
ISO 17357:2002
|
Ships and marine technology High-pressure floating pneumatic rubber fenders |
|
I.S. EN ISO 25649-7:2017
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES (ISO 25469-7:2017) |
|
ANSI HGV 3.1 : 2015
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
|
ISO 18797-1:2016
|
Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
|
ASTM D 4575 : 2009
|
Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers |
|
ISO 14409:2011
|
Ships and marine technology — Ship launching air bags |
|
ISO 12991:2012
|
Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles |
|
EN ISO 25649-7:2017
|
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017) |
|
EN ISO 28017:2018
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018) |
|
ISO 4633:2015
|
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
|
ISO 16010:2005
|
Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
|
DIN EN 14188-3:2006-04
|
Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
|
DIN EN ISO 6807:2004-08
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003) |
|
DIN EN 681-1:2016-07 (Draft)
|
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
|
DIN EN 682:2006-10
|
Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
|
DIN EN 1337-3 E : 2005
|
STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
|
DIN EN 14382:2016-05 (Draft)
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
ISO 7326:2016
|
Rubber and plastics hoses Assessment of ozone resistance under static conditions |
|
UNI EN 1844 : 2013
|
FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
|
UNI EN 421 : 2010
|
PROTECTIVE GLOVES AGAINST IONIZING RADIATION AND RADIOACTIVE CONTAMINATION |
|
UNI EN 14241-1 : 2013
|
CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
|
UNI EN 14382 : 2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
EN ISO 13628-10:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
|
I.S. EN 15807:2011
|
RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
|
16/30334092 DC : 0
|
BS ISO 1431-3 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 3: REFERENCE AND ALTERNATIVE METHODS FOR DETERMINING THE OZONE CONCENTRATION IN LABORATORY TEST CHAMBERS |
|
DIN EN ISO 7326:2015-10 (Draft)
|
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
|
12/30250853 DC : 0
|
BS ISO 17357-2 - SHIPS AND MARINE TECHNOLOGY - FLOATING PNEUMATIC RUBBER FENDERS - PART 2: LOW PRESSURE |
|
10/30212877 DC : DRAFT JUNE 2010
|
BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
|
I.S. EN 60684-2:2011
|
FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
|
BS 903-A44:1983
|
Physical testing of rubber Determination of resistance to ozone cracking (dynamic strain test) |
|
ISO/PAS 11154:2006
|
Road vehicles — Roof load carriers |
|
10/30191247 DC : DRAFT APR 2010
|
BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
|
CSA HGV 3.1 : 2013
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
|
BS ISO 9679:2006
|
Aerospace. Clamps for fluid systems. Test methods |
|
17/30320673 DC : 0
|
BS EN ISO 17268 - GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
|
13/30236754 DC : 0
|
BS ISO 16380 - ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
|
BS EN ISO 21809-3:2016
|
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
|
DIN EN 61854 : 1999
|
OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
|
08/30156909 DC : DRAFT APR 2008
|
BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
|
BS 903-A45(2000) : 2000
|
RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 3: REFERENCE AND ALTERNATIVE METHODS FOR DETERMINING THE OZONE CONCENTRATION IN LABORATORY TEST CHAMBERS |
|
13/30227963 DC : 0
|
BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION |
|
10/30214883 DC : 0
|
BS ISO 14409 - SHIPS AND MARINE TECHNOLOGY - SHIPS LAUNCHING AIR BAG |
|
DIN ISO 1431-3:2011-05
|
Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2000) |
|
09/30185951 DC : 0
|
BS EN 15889 - FIREFIGHTING HOSES - TEST METHODS |
|
BS EN 15649-7:2009
|
Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
|
BS EN 60505:2011
|
Evaluation and qualification of electrical insulation systems |
|
DIN EN 14840 E : 2005
|
JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
|
BS ISO 1823:2015
|
Rubber hose and hose assemblies for oil suction and discharge service. Specification |
|
BS ISO 15500-2:2012
|
Road vehicles. Compressed natural gas (CNG) fuel system components Performance and general test methods |
|
BS ISO 1382:2012
|
Rubber. Vocabulary |
|
04/30112025 DC : DRAFT APR 2004
|
ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
|
XP D36 114 : 2000 XP
|
HOUSEHOLD ECONOMY - (REINFORCED) RUBBER TUBING FOR THE EXTERNAL CONNECTION OF APPLIANCES USING BUTANE OR PROPANE |
|
07/30161910 DC : 0
|
BS EN 15649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
|
BS ISO 4141-1:2005
|
Road vehicles. Multi-core connecting cables Test methods and requirements for basic performance sheathed cables |
|
BS ISO 19003:2006
|
Rubber and rubber products. Guidance on the application of statistics to physical testing |
|
01/106321 DC : DRAFT AUG 2001
|
PREN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
|
ISO 17357-1:2014
|
Ships and marine technology — Floating pneumatic rubber fenders — Part 1: High pressure |
|
ISO 10960:2017
|
Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions |
|
PREN 3207 : 1996
|
AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
|
16/30318653 DC : 0
|
BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
|
S.R. CLC/TS 50467:2008
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
|
ISO 13985:2006
|
Liquid hydrogen — Land vehicle fuel tanks |
|
I.S. EN ISO 10960:2018
|
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS (ISO 10960:2017) |
|
CSA 12.3 : 2014
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
|
API STD 17F : 2017
|
SUBSEA PRODUCTION CONTROL SYSTEMS |
|
CEI EN 60505 : 2012
|
EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
|
DIN EN ISO 28017:2015-12
|
RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015) |
|
EN ISO 10960:2018
|
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017) |
|
18/30365845 DC : 0
|
BS EN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
|
BS EN ISO 10960:2018
|
Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions |
|
ISO 24454:2008
|
Rubber Acquisition and presentation of comparable multi-point data |
|
ISO 1382:2012
|
Rubber Vocabulary |
|
ISO 6446:1994
|
Rubber products — Bridge bearings — Specification for rubber materials |
|
ISO 24453:2008
|
Rubber Acquisition and presentation of comparable single-point data |
|
ISO 23711:2003
|
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
|
ISO 17325-1:2014
|
Ships and marine technology Marine environment protection Oil booms Part 1: Design requirements |
|
ISO 17324:2014
|
Rubber hoses for automotive turbochargers — Specification |
|
IEC 61854:1998
|
Overhead lines - Requirements and tests for spacers |
|
DIN EN 421:2010-10
|
Protective gloves against ionizing radiation and radioactive contamination |
|
BS EN ISO 13628-10:2006
|
Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
|
EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
|
BS EN 681-3:2000
|
Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber |
|
IEC 60505:2011
|
Evaluation and qualification of electrical insulation systems |
|
BS EN 14188-3 : 2005
|
JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
|
UNE-EN 1844:2013
|
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing |
|
IEC 60684-2:2011
|
Flexible insulating sleeving - Part 2: Methods of test |
|
BS EN 1337-3:2005
|
Structural bearings Elastomeric bearings |
|
BS EN 682:2002
|
Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
|
ISO 6807:2003
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification |
|
BS EN 13787:2001
|
Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
|
BS EN 3207:1998
|
Rubber compounds. Technical specification |
|
BS EN 1123-1:1999
|
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control |
|
CLC/TS 50467 : 2008 COR 2008
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
|
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
|
EN 14188-3 : 2006
|
JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
|
EN 16678:2015
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
EN 14241-1:2013
|
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
|
EN 14840 : 2005
|
JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
|
EN ISO 6807 : 2003
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
|
EN 681-3:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER |
|
EN 14382:2005+A1:2009/AC:2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
EN 15649-7:2009
|
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
|
EN 1765:2016
|
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
|
EN 682:2002/A1:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
|
EN 421:2010
|
Protective gloves against ionizing radiation and radioactive contamination |
|
EN 13787:2001
|
Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
|
EN 3207 : 1998
|
AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
|
EN ISO 7326:2016
|
Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
|
EN 681-2:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
|
EN 549:1994
|
Rubber materials for seals and diaphragms for gas appliances and gas equipment |
|
EN 1844:2013
|
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing |
|
BS 903-3:2003
|
Physical testing of rubber Acquisition and presentation of comparable single-point data |
|
DIN EN 16678 E : 2016
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
|
BS ISO 1431-3:2017
|
Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
|
96/106381 DC : DRAFT AUG 1996
|
PREN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
|
DD ISO/PAS 11154:2006
|
Road vehicles. Roof load carriers |
|
14/30300605 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
|
ISO 1431-2:1994
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 2: Dynamic strain test |
|
I.S. EN ISO 21809-3:2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
|
PREN 1337-3 : DRAFT 2018
|
STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
|
CEI EN 60684-2 : 2012
|
FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
|
ISO 4141-1:2005
|
Road vehicles Multi-core connecting cables Part 1: Test methods and requirements for basic performance sheathed cables |
|
ISO 6916-1:1995
|
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
|
BS EN ISO 7326:2016
|
Rubber and plastics hoses. Assessment of ozone resistance under static conditions |
|
BS EN 16678:2015
|
Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
BS ISO 17357-1:2014
|
Ships and marine technology. Floating pneumatic rubber fenders High pressure |
|
BS ISO 17325-1:2014
|
Ships and marine technology. Marine environment protection. Oil booms Design requirements |
|
BS EN ISO 25649-7:2017
|
Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
|
BS ISO 22762-1:2005
|
Elastomeric seismic-protection isolators Test methods |
|
BS 903-A55:1989
|
Physical testing of rubber Methods for assessment of changes in properties after exposure to natural weathering or artificial light, for use in determining resistance to weathering |
|
DIN EN 15649-7:2010-04
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
|
08/30165015 DC : DRAFT FEB 2008
|
BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
|
15/30317681 DC : 0
|
BS EN ISO 7326 - RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS |
|
03/118041 DC : DRAFT NOV 2003
|
EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS |
|
BS EN 50467:2011
|
Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
|
BS 903-A53:1989
|
Physical testing of rubber Methods for exposure to natural weathering, for use in determining resistance to weathering |
|
PREN 1844 : DRAFT 2012
|
FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
|
DIN EN ISO 17268 E : 2017
|
GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
|
DIN EN 16678:2016-02
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
ISO 4635:2011
|
Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
|
DIN 53509-1:2001-01
|
TESTING OF RUBBER - DETERMINATION OF RESISTANCE TO OZONE CRACKING - PART 1: STATIC CONDITIONS |
|
ISO 4927:2005
|
Road vehicles Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) |
|
BS EN ISO 18797-1:2017
|
Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
|
UNE-EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
|
ISO 22762-1:2010
|
Elastomeric seismic-protection isolators Part 1: Test methods |
|
I.S. EN ISO 17268:2016
|
GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
|
I.S. EN 15649-7:2009
|
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
|
BS ISO 17357:2002
|
Ships and marine technology. High-pressure floating pneumatic rubber fenders |
|
ISO 23550:2011
|
Safety and control devices for gas burners and gas-burning appliances General requirements |
|
I.S. EN 16678:2015
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
|
XP D36 126 : 1997 AMD 1 2002 XP
|
HOMOGENEOUS INTERNAL DIAMETER 12 MM RUBBER TUBING FOR CONNECTING PIPELINE GAS-FIRED MOBILE APPLIANCES FOR COMMERCIAL AND INDUSTRIAL USE, ESPECIALLY LABORATORY EQUIPMENT IN RESEARCH AND TEACHING |
|
ISO 16380:2014
|
Road vehicles — Blended fuels refuelling connector |
|
I.S. EN 14840:2005
|
JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
|
ISO 5892:2013
|
Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification |
|
IEC 62847:2016
|
Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
|
ISO 17268:2012
|
Gaseous hydrogen land vehicle refuelling connection devices |
|
ISO 13628-10:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
|
DIN EN 14840:2005-12
|
Joint fillers and sealants - Test methods for preformed joint seals |
|
EN 13760:2003
|
Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
|
EN 1337-3:2005
|
Structural bearings - Part 3: Elastomeric bearings |
|
EN 50467 : 2011
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |