14/30266776 DC : 0
|
BS ISO 18187 - SOIL QUALITY - QUALITY OF SOLID SAMPLES - SOLID CONTACT TEST USING THE DEHYDROGENASE ACTIVITY OF ARTHROBACTER GLOBIFORMIS |
ISO 18187:2016
|
Soil quality Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis |
I.S. EN 14522:2005
|
DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
09/30172818 DC : 0
|
BS ISO 15320 - PAPER, BOARD AND PULPS - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
BS ISO 4802-1:2016
|
Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by titration method and classification |
ISO 4802-1:2016
|
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification |
EN ISO 18187:2018
|
Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016) |
UNE-EN ISO 1135-3:2017
|
Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
DIN EN 15519 E : 2008
|
PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT |
DIN EN 993-16:1995-09
|
DENSE SHAPED REFRACTORY PRODUCTS - METHOD OF TEST - PART 16: DETERMINATION OF RESISTANCE TO SULPHURIC ACID |
BS EN ISO 6427:2014
|
Plastics. Determination of matter extractable by organic solvents (conventional methods) |
DIN EN ISO 9562:2005-02
|
WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
BS EN ISO 5377:1994
|
Starch hydrolysis products. Determination of reducing power and dextrose equivalent. Lane and Eynon constant titre method |
EN 12829:2011
|
Surface active agents - Preparation of water with known calcium and magnesium hardness |
DIN EN ISO 6427:1998-10
|
PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
03/305257 DC : DRAFT MAR 2003
|
BS EN ISO 9562 - WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
04/30124059 DC : DRAFT OCT 2004
|
ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
07/30172881 DC : 0
|
BS ISO 10307-2 - PETROLEUM PRODUCTS - TOTAL SEDIMENT IN RESIDUAL FUEL OILS - PART 2: DETERMINATION USING STANDARD PROCEDURES FOR AGEING |
BS 2000-53(1999) : 1999
|
CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
DIN EN 12829:2011-07
|
Surface active agents - Preparation of water with known calcium and magnesium hardness |
14/30303657 DC : 0
|
BS EN ISO 1135-3 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SET FOR SINGLE USE |
BS 2782-4.455A(1993) : 1993 AMD 10347
|
METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) |
09/30199361 DC : 0
|
BS EN 12829 - SURFACE ACTIVE AGENTS - PREPARATION OF WATER WITH KNOWN CALCIUM HARDNESS |
DIN 52027:2003-11
|
TESTING OF CARBONACEOUS MATERIALS - DISTILLATION OF REFINED COAL TARS |
I.S. EN ISO 18187:2018
|
SOIL QUALITY - CONTACT TEST FOR SOLID SAMPLES USING THE DEHYDROGENASE ACTIVITY OF ARTHROBACTER GLOBIFORMIS (ISO 18187:2016) |
ISO 3735:1999
|
Crude petroleum and fuel oils Determination of sediment Extraction method |
BS EN ISO 24450:2005
|
Laboratory glassware. Wide-necked boiling flasks |
I.S. EN 12829:2011
|
SURFACE ACTIVE AGENTS - PREPARATION OF WATER WITH KNOWN CALCIUM AND MAGNESIUM HARDNESS |
DIN 10476:2001-11
|
DETERMINATION OF NITRITE AND NITRATE CONTENT OF MILK PRODUCTS - ENZYMATIC METHOD (COLOR TEST) |
I.S. EN ISO 15320:2011
|
PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
I.S. EN ISO 4797:2015
|
LABORATORY GLASSWARE - BOILING FLASKS WITH CONICAL GROUND JOINTS (ISO 4797:2015) |
I.S. EN ISO 6427:2014
|
PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
DIN EN ISO 1135-3:2017-05
|
TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
PREN 12829 : DRAFT 2009
|
SURFACE ACTIVE AGENTS - PREPARATION OF WATER WITH KNOWN CALCIUM AND MAGNESIUM HARDNESS |
04/301875 DC : DRAFT JAN 2004
|
ISO 24450 - LABORATORY GLASSWARE - WIDE-NECKED BOILING FLASKS |
02/124417 DC : DRAFT DEC 2002
|
BS EN ISO 4797 - LABORATORY GLASSWARE - BOILING FLASKS WITH CONICAL GROUND JOINTS |
14/30283718 DC : 0
|
BS ISO 4797 - LABORATORY GLASSWARE - BOILING FLASKS WITH CONICAL GROUND JOINTS |
UNI EN 15519 : 2008
|
PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT |
02/540610 DC : DRAFT JULY 2002
|
BS EN ISO 14522 - DETERMINATION OF THE MINIMUM IGNITION TEMPERATURE OF GASES AND VAPOURS |
BS ISO 18187 : 2016
|
SOIL QUALITY - CONTACT TEST FOR SOLID SAMPLES USING THE DEHYDROGENASE ACTIVITY OF ARTHROBACTER GLOBIFORMIS |
BIS IS 1448-30 : 2013
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 30: CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
NF EN ISO 105 Z09 : 1998
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z09: DETERMINATION OF COLD WATER SOLUBILITY OF WATERS-SOLUBLE DYES |
ISO 10307-2:2009
|
Petroleum products Total sediment in residual fuel oils Part 2: Determination using standard procedures for ageing |
ISO 1272:2000
|
Essential oils Determination of content of phenols |
ISO 1065:1991
|
Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents Determination of cloud point |
DIN EN ISO 9562 E : 2005
|
WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
DIN EN ISO 24450:2006-02
|
Laboratory glassware - Wide-necked boiling flasks (ISO 24450:2005) |
DIN EN 14522 E : 2005
|
DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
DIN EN ISO 6427:2014-08
|
PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
BS EN ISO 105-Z07:1998
|
Textiles. Tests for colour fastness Determination of application solubility and solution stability of water-soluble dyes |
BS EN 15519:2007
|
Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract |
EN ISO 15320:2011
|
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
UNI EN 12829 : 2011
|
SURFACE ACTIVE AGENTS - PREPARATION OF WATER WITH KNOWN CALCIUM HARDNESS |
BS 1751:1997
|
Laboratory glassware. Specification for straight-bore glass stopcocks for general purposes |
UNI EN ISO 15320 : 2011
|
PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
UNI EN ISO 6427 : 2014
|
PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) |
BS EN ISO 18187:2018
|
Soil quality. Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis |
BS ISO 1272:2000
|
Essential oils. Determination of content of phenols |
BIS IS/ISO 1066 : 1975
|
ANALYSIS OF SOAPS - DETERMINATION OF GLYCEROL CONTENT - TITRIMETRIC METHOD |
DIN EN ISO 1135-3 E : 2017
|
TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
BS ISO 4800:1998
|
Laboratory glassware. Separating funnels and dropping funnels |
BIS IS/ISO 1067 : 1974
|
ANALYSIS OF SOAPS - DETERMINATION OF UNSAPONIFIABLE, UNSAPONIFIED AND UNSAPONIFIED SAPONIFIABLE MATTER |
BS ISO 4798:1997
|
Laboratory glassware. Filter funnels |
NF EN ISO 105 Z08 : 1998
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z08: DETERMINATION OF SOLUBILITY AND SOLUTION STABILITY OF REACTIVE DYES IN THE PRESENCE OF ELECTROLYTES |
BS 6352:1983
|
Specification for flasks with ground glass joints |
I.S. EN ISO 1135-3:2017
|
TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
ISO 719:1985
|
Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
BS EN ISO 105-Z09:1998
|
Textiles. Tests for colour fastness Determination of cold water solubility of water-soluble dyes |
BS EN 14522:2005
|
Determination of the auto ignition temperature of gases and vapours |
ISO 1135-3:2016
|
Transfusion equipment for medical use Part 3: Blood-taking sets for single use |
BS EN ISO 15320:2011
|
Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract |
BS EN ISO 105-Z08:1998
|
Textiles. Tests for colour fastness Determination of solubility and solution stability of reactive dyes in the presence of electrolytes |
UNE-EN ISO 15320:2012
|
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
UNE-EN ISO 6427:2015
|
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013) |
ISO 105-Z08:1995
|
Textiles — Tests for colour fastness — Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes |
ISO 6427:2013
|
Plastics — Determination of matter extractable by organic solvents (conventional methods) |
ISO 9562:2004
|
Water quality — Determination of adsorbable organically bound halogens (AOX) |
ISO 105-Z09:1995
|
Textiles — Tests for colour fastness — Part Z09: Determination of cold water solubility of water-soluble dyes |
BS EN 12829:2011
|
Surface active agents. Preparation of water with known calcium and magnesium hardness |
ISO 24450:2005
|
Laboratory glassware Wide-necked boiling flasks |
ISO 15320:2011
|
Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract |
BS EN ISO 3735:1999
|
Crude petroleum and fuel oils. Determination of sediment. Extraction method |
ISO 4797:2015
|
Laboratory glassware Boiling flasks with conical ground joints |
UNE-EN ISO 4797:2016
|
Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015) |
ISO 105-Z07:1995
|
Textiles — Tests for colour fastness — Part Z07: Determination of application solubility and solution stability of water-soluble dyes |
EN ISO 3735:1999
|
Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
EN 15519:2007
|
Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
EN ISO 1135-3:2017
|
Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
EN ISO 105-Z07 : 1997
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z07: DETERMINATION OF APPLICATION SOLUBILITY AND SOLUTION STABILITY OF WATER-SOLUBLE DYES |
EN ISO 5377 : 1994
|
Starch hydrolysis products - Determination of reducing power and dextrose equivalent - Lane and Eynon constant titre method (ISO 5377:1981) |
EN ISO 105-Z09 : 1997
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z09: DETERMINATION OF COLD WATER SOLUBILITY OF WATER-SOLUBLE DYES |
EN ISO 105-Z08 : 1997
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z08: DETERMINATION OF SOLUBILITY AND SOLUTION STABILITY OF REACTIVE DYES IN THE PRESENCE OF ELECTROLYTES |
EN ISO 9562:2004
|
Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
EN ISO 24450:2005
|
Laboratory glassware - Wide-necked boiling flasks (ISO 24450:2005) |
EN 14522:2005
|
Determination of the auto ignition temperature of gases and vapours |
EN ISO 6427:2014
|
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013) |
EN 993-16:1995
|
Dense shaped refractory products - Methods of test - Part 16: Determination of resistance to sulphuric acid |
EN 647:1993
|
Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract |
EN ISO 4797:2015
|
Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015) |
15/30315525 DC : 0
|
BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
BS EN ISO 1135-3:2017
|
Transfusion equipment for medical use Blood-taking sets for single use |
BS 3473-4:1983
|
Chemical resistance of glass used in the production of laboratory glassware Method for determination of hydrolytic resistance of the interior surfaces of glass containers |
DIN EN ISO 1135-3:2014-12 (Draft)
|
TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
09/30178946 DC : 0
|
BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
BS ISO 10307-2:2009
|
Petroleum products. Total sediment in residual fuel oils Determination using standard procedures for ageing |
BIS IS 2303-1-2 : 2012(R2017)
|
GRADING GLASS - PART 1: METHOD OF TEST AND CLASSIFICATION - SECTION 2: HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 121 DEGREES C |
NF ISO 1272 : 2000
|
ESSENTIALS OILS - DETERMINATION OF CONTENT OF PHENOLS |
ISO 10136-5:1993
|
Glass and glassware Analysis of extract solutions Part 5: Determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry |
BS EN ISO 4797:2015
|
Laboratory glassware. Boiling flasks with conical ground joints |
ISO 5377:1981
|
Starch hydrolysis products Determination of reducing power and dextrose equivalent Lane and Eynon constant titre method |
BS EN ISO 9562:2004
|
Water quality. Determination of adsorbable organically bound halogens (AOX) |
DIN EN ISO 4797:2016-05
|
LABORATORY GLASSWARE - BOILING FLASKS WITH CONICAL GROUND JOINTS (ISO 4797:2015) |
DIN EN ISO 15320:2011-11
|
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
DIN 38409-7:2005-12
|
German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 7: Determination of acid and base-neutralizing capacities (H 7) |
DIN EN 15519:2008-01
|
Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
DIN EN 14522:2005-12
|
Determination of the auto ignition temperature of gases and vapours |