12/30255878 DC : 0
|
BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
PREN 1451-1 : DRAFT 2016
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
08/30184196 DC : DRAFT JUNE 2008
|
BS ISO 29804 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE TENSILE BOND STRENGTH OF THE ADHESIVE AND OF THE BASE COAT TO THE THERMAL INSULATION MATERIAL |
17/30339710 DC : 0
|
BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B |
17/30339707 DC : 0
|
BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A |
BS 7253-5:1990
|
Non-metallic materials for surgical implants Specification for ultra-high molecular mass polyethylene in moulded form |
13/30263803 DC : 0
|
BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
PREN 1519-1 : DRAFT 2017
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
16/30336859 DC : 0
|
BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
08/30184193 DC : DRAFT JUNE 2008
|
BS ISO 29803 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE RESISTANCE TO IMPACT OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) |
PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
I.S. EN ISO 17296-3:2016
|
ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
BS 2782-4 Method 470B:1991
|
Methods of testing plastics. Chemical properties Determination of ash of polyalkylene terephthalates |
09/30192396 DC : DRAFT APR 2009
|
BS ISO 18280 - PLASTICS - EPOXY RESINS - TEST METHODS |
16/30332879 DC : 0
|
BS EN 1451-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
ISO 17738-1:2017
|
Thermal insulation products Exterior insulation and finish systems Part 1: Materials and systems |
BS 3531-20:1986
|
Surgical implants Specification for ultra-high molecular mass polyethylene in powder form |
DIN EN 15345:2008-02
|
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
DD CEN/TS 14541:2007
|
Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials |
BS ISO 5834-3:2005
|
Implants for surgery. Ultra-high-molecular-weight polyethylene Accelerated ageing methods |
16/30337086 DC : DRAFT APR 2016
|
BS EN 1504-4 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
BS 7253-4:1990
|
Non-metallic materials for surgical implants Specification for ultra-high molecular mass polyethylene in powder form |
ISO 5834-1:2005
|
Implants for surgery Ultra-high-molecular-weight polyethylene Part 1: Powder form |
ISO 20557-2:2018
|
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
ISO 28078-2:2009
|
Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ASTM D 5577 : 1994
|
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
ASTM D 6778 : 2014 : REDLINE
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
ASTM D 6865 : 2017 : REDLINE
|
Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
BS EN 13476-3 : 2007
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
DIN EN ISO 15103-2:2007-09
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
BS EN 15347:2007
|
Plastics. Recycled Plastics. Characterization of plastics waste |
BS EN 13495:2002
|
Thermal insulation products for building applications. Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) |
DIN EN 15342 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
ISO 15103-2:2007
|
Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
EN 12080:2017
|
Railway applications - Axleboxes - Rolling bearings |
EN 13498:2002
|
Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) |
DIN EN 13476-2:2007-08
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
EN 13495:2002
|
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test) |
ONORM ONR CEN/TS 14541 : 2013
|
PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS (CEN/TS 14541:2013) |
BS ISO 5834-2:2011
|
Implants for surgery. Ultra-high-molecular-weight polyethylene Moulded forms |
08/30189097 DC : DRAFT SEP 2008
|
BS ISO 12968 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) (FOAM BLOCK TEST) |
14/30304007 DC : 0
|
BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
BS ISO 5834-1:2005
|
Implants for surgery. Ultra-high-molecular-weight polyethylene Powder form |
17/30349217 DC : 0
|
BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 15344:2007
|
Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
12/30256053 DC : 0
|
BS EN 16383 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS) |
16/30314617 DC : 0
|
BS ISO 19469-3 - PLASTIC PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE - SINGLE WALL CORRUGATED PIPING SYSTEMS OF POLYETHYLENE (PE), POLYPROPYLENE (PP) AND UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: PIPES AND FITTINGS FOR DEEP BURIAL INSTALLATIONS |
17/30360679 DC : DRAFT SEP 2017
|
BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC |
BS ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
17/30360578 DC : 0
|
BS ISO 5834-1 - IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE - PART 1: POWDER FORM |
15/30304304 DC : 0
|
BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
BS EN 16383:2016
|
Thermal insulation products for building applications. Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) |
PREN 13476-2 : DRAFT 2015
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
DIN ISO 5834-2:2014-02
|
IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE - PART 2: MOULDED FORMS (ISO 5834-2:2011) |
ISO 29804:2009
|
Thermal insulation products for building applications Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
UNI EN 15345 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
ISO 20558-2:2018
|
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
I.S. EN 13476-3:2007
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
BS EN 15814 : 2011
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
PREN 1852-1 : DRAFT 2016
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
I.S. EN 15814:2011
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
IEC 62899-202:2016
|
Printed electronics - Part 202: Materials - Conductive ink |
SAE J 2642 : 2017
|
RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS |
PREN 12080 : DRAFT 2015
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
(INACTIVE RECORD)ASTM D 5336 : 2015-04
|
CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS |
ASTM D 5857 : 2017 : REDLINE
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
EN 13497:2002
|
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) |
BS EN 13497:2002
|
Thermal insulation products for building applications. Determination of the resistance to impact of external thermal insulation composite systems (ETICS) |
ASTM F 2759 : 2011 : REDLINE
|
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
EN 1852-1:2018
|
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
DIN EN 15347:2008-02
|
Plastics - Recycled Plastics - Characterisation of plastics wastes |
DIN EN 12080:2015-06 (Draft)
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
DIN EN 15347 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
DIN EN 1504-4:2005-02
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding; German version EN 1504-4:2004 |
BS EN ISO 10082:2000
|
Plastics. Phenolic resins. Classification and test methods |
BS EN 12080:2017
|
Railway applications. Axleboxes. Rolling bearings |
ONORM EN 13476-3 : 2015
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B (AMENDMENT) |
I.S. EN 12080:2017
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
I.S. EN ISO 14663-2:2006
|
PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 15103-2:2007
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ONORM EN 13476-2 : 2015
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A (AMENDMENT) |
DIN EN 12080:2017-11
|
Railway applications - Axleboxes - Rolling bearings |
NBR ISO 5834-1 : 2008
|
IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR WEIGHT POLYETHYLENE - PART 1: POWDER FORM |
BS 2782-4:Method 470B:1999
|
Methods of testing plastics. Chemical properties Determination of ash of polyalkylene terephthalates |
BS 3531-21:1986
|
Surgical implants Specification for ultra-high molecular mass polyethylene in moulded form |
15/30327856 DC : 0
|
BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
BS IEC 62899-202:2016
|
Printed electronics Materials. Conductive ink |
EN 13476-3:2018
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
DIN EN 15814 E : 2015
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
PREN 1504-4 : DRAFT 2016
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
S.R. CEN/TS 14541:2013
|
PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS |
PD CEN/TS 14541:2013
|
Plastics pipes and fittings. Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
04/30101822 DC : DRAFT APR 2004
|
ISO 5834-1 - IMPLANTS FOR SURGERY - ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE - PART 1: POWDER FORM |
UNI EN 15347 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
DIN ISO 5834-1:2007-06
|
IMPLANTS FOR SURGERY - ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE - PART 1: POWDER FORM |
BS ISO 17738-1:2017
|
Thermal insulation products. Exterior insulation and finish systems Materials and systems |
BS EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation Methods of test |
15/30328314 DC : 0
|
BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
BS EN ISO 17296-3:2016
|
Additive manufacturing. General principles Main characteristics and corresponding test methods |
08/30165044 DC : DRAFT FEB 2008
|
BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS ISO 28078-2:2009
|
Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties |
UNI EN 15342 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
I.S. EN 1451-1:2017
|
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
I.S. EN 60455-2:2015
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
BS EN 1852-1:2018
|
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system |
EN 1451-1:2017
|
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
ISO 21138-3:2007
|
Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B |
17/30364341 DC : 0
|
BS EN 1519-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
ISO 3451-3:1984
|
Plastics — Determination of ash — Part 3: Unplasticized cellulose acetate |
BS EN 13476-2:2007
|
Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
PREN 13476-3 : DRAFT 2015
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
ASTM D 5138 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
ASTM D 6339 : 2011
|
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
DIN EN 15342:2008-02
|
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
DIN EN 15344:2008-02
|
Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
BS EN 13494:2002
|
Thermal insulation products for building applications. Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
ISO 3451-5:2002
|
Plastics — Determination of ash — Part 5: Poly(vinyl chloride) |
BS EN ISO 3451-5:2002
|
Plastics. Determination of ash Poly(vinyl chloride) |
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
DIN EN 15344 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
EN 13476-2:2018+A1:2020
|
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
EN ISO 14663-2:2006
|
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999) |
BS 2782-4.470D(1991) : 1991 AMD 9149
|
METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF ASH OF POLYAMIDES |
BS ISO 17296-3 : 2014
|
ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
UNI EN 15344 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
04/30031040 DC : 0
|
ISO 5834-3 - IMPLANTS FOR SURGERY - ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE - PART 3: ACCELERATED AGEING METHODS |
BS 2782-4.470E(1991) : 1991 AMD 9420
|
METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF ASH OF POLY(VINYL CHLORIDE) |
ISO 5834-2:2011
|
Implants for surgery Ultra-high-molecular-weight polyethylene Part 2: Moulded forms |
UNI CEN/TS 14541 : 2013
|
PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS |
DIN EN 15345 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
BS ISO 14663-2 : 1999 AMD 16029
|
PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
17/30360581 DC : 0
|
BS ISO 5834-2 - IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE - PART 2: MOULDED FORMS |
13/30242622 DC : 0
|
BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
BS EN 15345:2007
|
Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
UNE-EN 15814:2011
|
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
I.S. EN 1852-1:2018
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
ASTM F 648 : 2014 : REDLINE
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
ASTM F 2695 : 2012 : REDLINE
|
Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
ISO 12968:2010
|
Thermal insulation products for building applications Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) |
ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
I.S. EN 15345:2007
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
ISO 5834-3:2005
|
Implants for surgery Ultra-high-molecular-weight polyethylene Part 3: Accelerated ageing methods |
DIN EN 13476-2:2015-11 (Draft)
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
BS EN 1504-4:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural bonding |
DIN EN 15334 E : 2007
|
SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT |
IEC 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
BS EN 13498:2002
|
Thermal insulation products for building applications. Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) |
ISO 17296-3:2014
|
Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
BS EN 15342:2007
|
Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
BS EN ISO 14663-2:2006
|
Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 3451-4:1998
|
Plastics — Determination of ash — Part 4: Polyamides |
BS EN ISO 3451-4:2000
|
Plastics. Determination of ash Polyamides |
DIN EN 15334:2007-05
|
Sanitary appliances - Methacrylic dispersions of high filler content |
CEN/TS 14541:2013
|
Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
EN 15334:2007
|
Sanitary appliances - Methacrylic dispersions of high filler content |
EN 15342:2007
|
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
EN 1504-4:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding |
EN 15347:2007
|
Plastics - Recycled Plastics - Characterisation of plastics wastes |
EN ISO 3451-5:2002
|
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002) |
EN 15345:2007
|
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
EN 15814:2011+A2:2014
|
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
EN 16383:2016
|
Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) |
EN ISO 17296-3:2016
|
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
EN ISO 15103-2:2007
|
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007) |
EN ISO 3451-4:2000
|
Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998) |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
ISO 23560:2015
|
Woven polypropylene sacks for bulk packaging of foodstuffs |
ASTM D 5630 : 2013 : REDLINE
|
Standard Test Method for Ash Content in Plastics (Withdrawn 2022) |
06/30136263 DC : DRAFT MAR 2006
|
ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2 - PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE - TYPE A |
15/30320410 DC : 0
|
BS EN 16383 - THERMAL INSULATION PRODUCTS FOR BUILDINGS APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS) |
ISO 3451-2:1998
|
Plastics Determination of ash Part 2: Poly(alkylene terephthalate) materials |
13/30271610 DC : 0
|
BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
ISO 21138-2:2007
|
Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A |
I.S. EN 15344:2007
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
DIN EN 15814:2015-03
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
15/30327636 DC : 0
|
BS EN 13476-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
15/30327639 DC : 0
|
BS EN 13476-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
DIN EN 13476-3:2015-11 (Draft)
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
ISO 29803:2010
|
Thermal insulation products for building applications Determination of the resistance to impact of external thermal insulation composite systems (ETICS) |
BS EN 1451-1:2017
|
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Specifications for pipes, fittings and the system |
I.S. EN 13476-2:2007
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
EN 13476-2:2018
|
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
BS ISO 18280:2010
|
Plastics. Epoxy resins. Test methods |
ASTM D 5577 : 1994 : R2010 : EDT 1
|
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019) |
UNE-EN ISO 17296-3:2017
|
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
ASTM D 5577 : 1994 : R2003
|
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
ISO 18280:2010
|
Plastics Epoxy resins Test methods |
DIN EN 1504-4:2016-05 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
BS EN ISO 15103-2:2007
|
Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 14663-2:1999
|
Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN 15334:2007
|
Sanitary appliances. Methacrylic dispersions of high filler content |
BS EN 15344:2007
|
Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates |
DIN EN ISO 14663-2:2006-06
|
PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 13494:2002
|
Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |