PREN 14175-3 : DRAFT 2017
|
FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
UNE-EN ISO 4414:2011
|
Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
ISO 13578:2017
|
Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
10/30162951 DC : DRAFT MAY 2010
|
BS EN 61973 - HIGH VOLTAGE DIRECT CURRENT (HVDC) SUBSTATION AUDIBLE NOISE |
I.S. EN 14824:2004
|
SPACE ENGINEERING - TESTING |
08/30165047 DC : DRAFT JUNE 2008
|
BS EN ISO 9906 - ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
I.S. EN ISO 3382-3:2012
|
ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012) |
BS EN ISO 13482:2014
|
Robots and robotic devices. Safety requirements for personal care robots |
03/306044 DC : DRAFT APR 2003
|
BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
BS ISO 10494:1993
|
Gas turbines and gas turbine sets. Measurement of emitted airborne noise. Engineering/survey method |
CSA Z107.58 : 2015
|
NOISE EMISSION DECLARATIONS FOR MACHINERY |
ANSI S12.62 : 2012
|
ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
03/306594 DC : DRAFT APR 2003
|
BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE |
I.S. EN ISO 11553-3:2013
|
SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013) |
IEC TR 61366-3:1998
|
Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3: Guidelines for technical specifications for Pelton turbines |
EN ISO 11202:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
10/30235571 DC : DRAFT DEC 2010
|
BS EN 13418 - PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
ANSI S12.57 : 2011
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
BS EN 15657:2017
|
Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions |
03/313810 DC : 0
|
EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
DIN EN ISO 11553-3:2013-07
|
SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013) |
BS IEC 61366-5:1998
|
Hydraulic turbines, storage pumps, and pump turbines. Tendering documents Guidelines for technical specifications for tubular turbines |
BS 848-2.2(2004) : 2004
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 2: REVERBERANT ROOM METHOD |
I.S. EN 415-9:2009
|
SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3 |
11/30212367 DC : 0
|
BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
DIN EN 15657 E : 2017
|
ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
BS EN ISO 10439-1:2015
|
Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
BS IEC 61366-2:1998
|
Hydraulic turbines, storage pumps, and pump turbines. Tendering documents Guidelines for technical specifications for Francis turbines |
PREN ISO 11200 : DRAFT 2012
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
BS 848-2.1(2004) : 2004
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW |
UNE-EN ISO 4413:2011
|
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
ISO 10494:1993
|
Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method |
DIN EN ISO 13482:2014-11
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
EEMUA 140 : 2014
|
NOISE PROCEDURE SPECIFICATION |
BS ISO 532-1:2017
|
Acoustics. Methods for calculating loudness Zwicker method |
I.S. EN 12102:2013
|
AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
I.S. EN 16603-10-03:2014
|
SPACE ENGINEERING - TESTING |
BS EN ISO 4414:2010
|
Pneumatic fluid power. General rules and safety requirements for systems and their components |
CEI UNI EN 45510-6-4 : 2000
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS |
ISO 8525:2008
|
Airborne noise emitted by machine tools Operating conditions for metal-cutting machines |
PD IEC/TS 61973:2012
|
High voltage direct current (HVDC) substation audible noise |
ANSI S12.23:1989(R2011)
|
METHOD FOR THE DESIGNATION OF SOUND POWER EMITTED BY MACHINERY AND EQUIPMENT |
ANSI/ASA S12.23 : 1989(R2016)
|
METHOD FOR THE DESIGNATION OF SOUND POWER EMITTED BY MACHINERY AND EQUIPMENT |
ANSI/ASA S12.53 PART 2 : 1999(R2015)
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
UNI EN 12102 : 2014
|
AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
I.S. EN ISO 3743-2:2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS |
EN 285:2015
|
Sterilization - Steam sterilizers - Large sterilizers |
DIN EN ISO 9906 E : 2013
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
DIN EN ISO 9902-1 E : 2001
|
TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014) |
DIN EN ISO 11200:2014-10
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
BS EN 12599:2012
|
Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
BS EN ISO 3741:2009
|
Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms |
BS EN ISO 5135:1999
|
Acoustics. Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
UNE-EN ISO 11200:2014
|
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
BS EN 953 : 1998
|
SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
ISO 3746:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
UNE-EN ISO 9614-1:2010
|
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
PD ISO/TR 18569:2004
|
Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
ISO 11203:1995
|
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
BS EN ISO 11957:2009
|
Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements |
BS EN ISO 11201:2010
|
Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
BS EN ISO 11690-2:1997
|
Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures |
BS EN 1035:1999
|
Tannery machines. Moving platen machinery. Safety requirements |
BS EN ISO 15667:2000
|
Acoustics. Guidelines for noise control by enclosures and cabins |
BS EN 15067:2007
|
Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements |
BS EN 12259-4:2000
|
Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms |
I.S. EN ISO 4871:2009
|
ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
DIN EN 15067:2008-03
|
Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
EN 13023:2003+A1:2010
|
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
EN 16228-1:2014
|
Drilling and foundation equipment - Safety - Part 1: Common requirements |
EN 1035:1998/AC:2002
|
TANNERY MACHINES - MOVING PLATEN MACHINERY - SAFETY REQUIREMENTS |
DIN EN ISO 9902-1:2001-07
|
TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014) |
EN 12547:2014
|
Centrifuges - Common safety requirements |
EN 12102:2013
|
Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level |
EN 12354-5:2009/AC:2010
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
EN 12259-4:2000/A1:2001
|
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms |
EN 12599:2012
|
Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
DIN EN ISO 4871:2009-11
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN 61096:1993/A1:1996
|
METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS |
EN 13021:2003+A1:2008
|
Winter service machines - Safety requirements |
EN 45510-6-4 : 1999
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS |
EN 62121:2001
|
Methods of measurement for minidisc recorders/players |
EN 12215:2004+A1:2009
|
Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
EN 13113:2002+A1:2010
|
Tannery machines - Roller coating machines - Safety requirements |
ONORM EN 12354-5 : 2011
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
I.S. EN 12354-5:2009
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
11/30254129 DC : 0
|
BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
13/30279964 DC : 0
|
BS EN ISO 3743-2:1994/AMD 1 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
BS EN 415-9:2009
|
Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
ISO 27327-2:2014
|
Fans Air curtain units Part 2: Laboratory methods of testing for sound power |
BS ISO 9611:1996
|
Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted |
NF EN 61063 : 2003
|
ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY STEAM TURBINES AND DRIVEN MACHINERY |
DD ISO/TS 7849-1:2009
|
Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement Survey method using a fixed radiation factor |
BS EN 45510-6-8:2000
|
Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes |
17/30341100 DC : 0
|
BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
DIN EN ISO 11201:2010-10
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
BS 7140:1995
|
Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines |
12/30257842 DC : 0
|
BS ISO 27327-2 - FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER |
BS 4196-4:1981
|
Sound power levels of noise sources Engineering methods for determination of sound power levels for sources in free-field conditions over a reflecting plane |
BS ISO 27327-2:2014
|
Fans. Air curtain units Laboratory methods of testing for sound power |
BS EN 45510-6-4:2000
|
Guide for the procurement of power station equipment. Turbine auxiliaries Pumps - Pumps |
UNI EN 16228-1 : 2014
|
DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
16/30275393 DC : 0
|
BS ISO 532-2 - ACOUSTICS - METHODS FOR CALCULATING LOUDNESS - PART 2: MOORE-GLASBERG METHOD |
03/306593 DC : DRAFT APR 2003
|
BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
09/30203211 DC : 0
|
BS ISO 3382-3 - ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN SPACES |
12/30271386 DC : 0
|
BS EN 12102 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
BS 848-2.5(2003) : 2003
|
ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
UNI EN ISO 10821 : 2010
|
INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
UNI ISO 13347-1 : 2009
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW |
07/30094858 DC : 0
|
BS ISO 3747 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
PREN 12599 : DRAFT 2010
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
AHRI 530 : 2005
|
RATING OF SOUND AND VIBRATION FOR REFRIGERANT COMPRESSORS |
00/715016 DC : DRAFT OCT 2000
|
PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
DIN EN ISO 4414:2011-04
|
Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
ISO/TR 18569:2004
|
Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
API 610 : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
DIN EN ISO 4413:2011-04
|
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
IEC TR 61366-5:1998
|
Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 5: Guidelines for technical specifications for tubular turbines |
ISO 532-2:2017
|
Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method |
ISO 13347-2:2004
|
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method |
ISO 18758-2:2018
|
Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
BS ISO 13347-1 : 2004
|
INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW |
EN 14175-3:2003
|
FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
ANSI/ASA S12.54/ISO 3744 : 2011(R2016)
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
UNI EN 415-9 : 2010
|
SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3 |
ANSI S12.62 : 2012(R2017)
|
ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
IEC TR 61366-6:1998
|
Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 6: Guidelines for technical specifications for pump-turbines |
EN ISO 3746:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
DIN EN 12215:2010-06
|
COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
DIN EN 13021:2009-04
|
Winter service machines - Safety requirements (includes Amendment A1:2008) |
DIN EN 12354-5:2009-10
|
Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
DIN EN 14681:2010-10
|
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
DIN EN 14656:2010-10
|
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
BS EN ISO 13709:2003
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
BS EN 12215 : 2004
|
COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
ISO 4871:1996
|
Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 5136:2003
|
Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
BS EN ISO 11546-1:1996
|
Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes) |
ISO 11689:1996
|
Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
BS EN ISO 3744:2010
|
Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane |
BS EN 14673 : 2006
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
UNE-EN 12547:2015
|
Centrifuges - Common safety requirements |
I.S. EN 12215:2004
|
COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
I.S. EN ISO 11957:2009
|
ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS |
I.S. EN 14656:2006
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
I.S. EN ISO 12001:2009
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE |
I.S. EN ISO 3747:2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
I.S. EN ISO 5136:2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
I.S. EN 13113:2002
|
TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
I.S. EN ISO 3743-1:2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
I.S. EN ISO 6926:2016
|
ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016) |
I.S. EN ISO 3745:2012
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012) |
I.S. EN ISO 11204:2010
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
DIN EN ISO 11200:1996-07
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
I.S. EN ISO 3741:2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
DIN EN ISO 3382-2:2008-09
|
ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS |
I.S. EN 12599:2012
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
EN ISO 11690-1 : 1996
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES |
I.S. EN 14681:2006
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
I.S. EN ISO 9614-1:2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 1: MEASUREMENT AT DISCRETE POINTS |
I.S. EN ISO 1680:2013
|
ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013) |
EN ISO 6926:2016
|
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
I.S. EN ISO 11546-1:2009
|
ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
I.S. EN ISO 3744:2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
I.S. EN ISO 11546-2:2009
|
ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
I.S. EN ISO 9906:2012
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
DIN EN ISO 10821:2013-02
|
INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009) |
I.S. EN 12547:2014
|
CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
I.S. EN 14673:2006
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
I.S. EN ISO 2151:2008
|
ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
I.S. EN ISO 9614-3:2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
I.S. EN 13021:2003
|
WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
I.S. EN 13023:2003
|
NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
I.S. EN ISO 11202:2010
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
I.S. EN ISO 11201:2010
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS |
I.S. EN ISO 3746:2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
UNI EN ISO 11689 : 1998
|
ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
BS 4196-1:1991
|
Sound power levels of noise sources Precision methods for determination of sound power levels for broad-band sources in reverberation rooms |
BS 4196-2:1991
|
Sound power levels of noise sources Precision methods for determination of sound power levels for discrete-frequency and narrow-band sources in reverberation rooms |
BS 4773-2:1989
|
Methods for testing and rating air terminal devices for air distribution systems Acoustic testing |
UNI EN ISO 3382-3 : 2012
|
ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES |
DIN ISO 8525:2013-01
|
AIRBORNE NOISE EMITTED BY MACHINE TOOLS - OPERATING CONDITIONS FOR METAL-CUTTING MACHINES (ISO 8525:2008) |
DIN EN 415-9:2010-02
|
Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
I.S. EN 285:2015
|
STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
BS ISO 15664:2001
|
Acoustics. Noise control design procedures for open plant |
DIN EN 15657:2016-02 (Draft)
|
ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
10/30231432 DC : 0
|
BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS |
BS EN 14677:2008
|
Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
ANSI S12.53/2 : 1999
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
ISO/TS 22595-1:2006
|
Dentistry Plant area equipment Part 1: Suction systems |
BS 4196-6:1981
|
Sound power levels of noise sources Survey method for determination of sound power levels of noise sources |
14/30302515 DC : 0
|
BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
DIN EN 14677:2008-11
|
SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
09/30175681 DC : 0
|
BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
BS IEC 61366-6:1998
|
Hydraulic turbines, storage pumps, and pump turbines. Tendering documents Guidelines for technical specifications for pump-turbines |
UNI ISO 8525 : 2009
|
Airborne noise emitted by machine tools - Operating conditions of cutting machines |
BS 7458-2:1991
|
Test code for the measurement of airborne noise emitted by rotating electrical machinery Survey method |
BS EN ISO 11553-3:2013
|
Safety of machinery. Laser processing machines Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) |
DIN EN 16228-1:2014-10
|
Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
10/30235574 DC : 0
|
BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
BS EN 16603-10-03:2014
|
Space engineering. Testing |
BS 4196-5:1981
|
Sound power levels of noise sources Precision methods for determination of sound power levels for sources in anechoic and semi-anechoic rooms |
BS 7458-1:1991
|
Test code for the measurement of airborne noise emitted by rotating electrical machinery Engineering method for free-field conditions over a reflecting plane |
BS ISO 13347-2:2004
|
Industrial fans. Determination of fan sound power levels under standardized laboratory conditions Reverberant room method |
BS EN 61243-5:2001
|
Live working. Voltage detectors Voltage detecting systems (VDS) |
API 673 : 2014
|
CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
DIN EN ISO 11204:2010-10
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
I.S. EN 45510-4-5:2002
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
I.S. EN ISO 10439-1:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015) |
ISO 3742:1988
|
Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms |
ISO 3743-2:2018
|
Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms |
BS EN 14175-3:2003
|
Fume cupboards Type test methods |
PREN 12102 : DRAFT 2012
|
AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
IEC TR 61366-4:1998
|
Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines |
IEC TS 61973:2012
|
High voltage direct current (HVDC) substation audible noise |
DIN EN 12547:2014-12
|
CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
DIN EN ISO 6926:2016-08
|
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
DIN EN 13023:2010-08
|
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 (includes Amendment A1:2010) |
DIN EN 13113:2011-05
|
Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010) |
DIN EN ISO 1680:2014-04
|
ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013) |
DIN EN 285:2016-05
|
Sterilization - Steam sterilizers - Large sterilizers |
DIN EN ISO 3747:2011-03
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
DIN EN 15067 E : 2008
|
PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS |
UNI EN ISO 11202 : 2010
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
DIN EN ISO 3741:2011-01
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
DIN EN 14673:2010-10
|
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
ISO 11546-1:1995
|
Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes) |
ISO 6926:2016
|
Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
UNE-EN ISO 11203:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
ISO 3745:2012
|
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
UNE-EN ISO 5136:2010
|
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
BS EN ISO 9906:2012
|
Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
DIN EN ISO 9906:2013-03
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
ISO 3747:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
ISO 3741:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
UNE-EN ISO 6926:2016
|
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
I.S. EN ISO 5135:1999
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE FROM AIR-TERMINAL DEVICES, AIR-TERMINAL UNITS, DAMPERS AND VALVES BY MEASUREMENT IN A REVERBERATION ROOM |
ANSI/ASA S12.23:1989(R2020)
|
METHOD FOR THE DESIGNATION OF SOUND POWER EMITTED BY MACHINERY AND EQUIPMENT |
EN 13487 : 2003
|
HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
EN ISO 11203:2009
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
UNI EN ISO 11203 : 2009
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
EN ISO 5135 : 1998
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE FROM AIR-TERMINAL DEVICES, AIR-TERMINAL UNITS, DAMPERS AND VALVES BY MEASUREMENT IN A REVERBERATION ROOM |
I.S. EN ISO 11203:2009
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
EN 15657:2017
|
Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions |
UNI EN 12599 : 2012
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
UNI EN ISO 3743-2 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
UNI EN 14677 : 2008
|
SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
UNI EN ISO 3744 : 2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
UNI EN 13113 : 2010
|
TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
UNI EN ISO 11204 : 2010
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
UNI EN ISO 9614-3 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
UNI EN 15067 : 2008
|
PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS |
UNI EN ISO 12001 : 2009
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE |
UNI EN ISO 11957 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS |
UNI EN 14673 : 2010
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
UNI EN ISO 4871 : 2009
|
ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
UNI EN 953 : 2009
|
SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
UNI EN ISO 9906 : 2012
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
UNI EN ISO 11201 : 2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
UNI EN ISO 9614-1 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 1: MEASUREMENT AT DISCRETE POINTS |
UNI EN ISO 3746 : 2011
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
UNI EN ISO 5136 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
UNI EN 12547 : 2014
|
CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
UNI EN ISO 9902-1 : 2014
|
TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS |
UNI EN 14656 : 2010
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
UNI EN ISO 3747 : 2011
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
EN 45510-6-4:1999
|
Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps |
UNI EN 13023 : 2010
|
NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
UNI EN ISO 3741 : 2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
UNI EN ISO 2151 : 2008
|
ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
UNI EN ISO 3743-1 : 2010
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
UNI EN 12215 : 2010
|
COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
UNI EN ISO 11546-1 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
UNI EN ISO 11546-2 : 2009
|
ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
CEI EN 61243-5 : 2002
|
LIVE WORKING - VOLTAGE DETECTORS - PART 5: VOLTAGE DETECTING SYSTEMS (VDS) |
UNI EN 12354-5 : 2009
|
BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
UNI EN ISO 1680 : 2014
|
ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES |
UNI EN 14681 : 2010
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
14/30275192 DC : 0
|
BS EN ISO 6926 - ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
UNI ISO 9613-2 : 2006
|
ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
DIN EN ISO 3382-3:2012-05
|
Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012) |
DIN EN ISO 11202:2010-10
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
PREN 13487 : DRAFT 2017
|
HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
PREN 17180 : DRAFT 2017
|
STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
ISO 532-1:2017
|
Acoustics — Methods for calculating loudness — Part 1: Zwicker method |
CEI UNI EN 45510-4-5 : 2006
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
BS EN ISO 3382-3:2012
|
Acoustics. Measurement of room acoustic parameters Open plan offices |
DIN EN ISO 3744:2011-02
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
HI 14.6 : 2016
|
ROTODYNAMIC PUMPS FOR HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
07/30161654 DC : 0
|
BS ISO 8525 - AIRBORNE NOISE EMITTED BY MACHINE TOOLS - OPERATING CONDITIONS FOR METAL-CUTTING MACHINES |
09/30175684 DC : 0
|
BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
11/30216799 DC : 0
|
BS ISO 532-1 - ACOUSTICS - METHOD FOR CALCULATING LOUDNESS - PART 1: STATIONARY SOUNDS |
CEI UNI EN 45510-6-8 : 2000
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES |
BS ISO 8525:2008
|
Airborne noise emitted by machine tools. Operating conditions for metal-cutting machines |
09/30186472 DC : 0
|
BS EN 13023:2003/A1 - NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
UNE-EN ISO 13482:2014
|
Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
17/30356590 DC : DRAFT AUG 2017
|
BS ISO 10494 - TURBINES AND TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD |
16/30275390 DC : 0
|
BS ISO 532-1 - ACOUSTICS - METHODS FOR CALCULATING LOUDNESS - PART 1: ZWICKER METHOD |
BS EN 62121:2001
|
Methods of measurement for minidisc recorders/players |
ANSI S12.54:2011
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
BS EN ISO 3382-2:2008
|
Acoustics. Measurement of room acoustic parameters Reverberation time in ordinary rooms |
ANSI S12-5:2006
|
ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
BS IEC 61366-4:1998
|
Hydraulic turbines, storage pumps, and pump turbines. Tendering documents Guidelines for technical specifications for Kaplan and propeller turbines |
ANSI S12-5 : 2006 : R2011
|
ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
ANSI/ASA S12.53 PART 1 : 2011(R2016)
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
IEC TR 61366-2:1998
|
Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 2: Guidelines for technical specifications for Francis turbines |
ANSI S12.32 : 0
|
PRECISION METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF DISCRETE-FREQUENCY AND NARROW-BAND NOISE SOURCES IN REVERBERATION ROOMS |
API 610 REDLINE : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
UNI EN ISO 3382-2 : 2008
|
ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS |
I.S. EN 16228-1:2014
|
DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
I.S. EN ISO 13482:2014
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
I.S. EN 15657:2017
|
ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
PREN 12547 : DRAFT 2011
|
CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
17/30361327 DC : 0
|
BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
ISO 10843:1997
|
Acoustics — Methods for the description and physical measurement of single impulses or series of impulses |
IEC TR 61366-7:1998
|
Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 7: Guidelines for technical specifications for storage pumps |
EN ISO 3382-2:2008/AC:2009
|
ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS |
EN ISO 11200:2014
|
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
I.S. EN ISO 13709:2009
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
I.S. EN ISO 11200:2014
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
DIN EN 12599:2013-01
|
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 14681 E : 2010
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
DIN EN 14673 E : 2010
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
DIN EN ISO 11689:1997-03
|
ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT |
DIN EN ISO 2151:2009-01
|
ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
DIN EN 14656 E : 2010
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
BS EN ISO 1680:2013
|
Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines |
BS EN ISO 2151:2004
|
Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2) |
UNE-EN ISO 3747:2010
|
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000) |
BS EN 12547:2014
|
Centrifuges. Common safety requirements |
BS EN ISO 11689 : 1997
|
ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
BS EN ISO 10821 : 2005
|
INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
BS EN ISO 5136:2009
|
Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method |
ISO 10821:2005
|
Industrial sewing machines Safety requirements for sewing machines, units and systems |
ISO 9906:2012
|
Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
ISO 3743-1:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
ISO 11553-3:2013
|
Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) |
ISO 9614-3:2002
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
BS EN ISO 6926:2016
|
Acoustics. Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
IEC 61243-5:1997
|
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO 11202:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
BS EN ISO 9614-1:2009
|
Acoustics. Determination of sound power levels of noise sources using sound intensity Measurement at discrete points |
UNE-EN 16228-1:2015
|
Drilling and foundation equipment - Safety - Part 1: Common requirements |
BS EN ISO 11690-1:1997
|
Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies |
BS EN ISO 11546-2:2009
|
Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes) |
BS EN 13023 : 2003
|
NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
UNI EN ISO 11200 : 2014
|
ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
ISO 13482:2014
|
Robots and robotic devices Safety requirements for personal care robots |
ISO 9902-1:2001
|
Textile machinery — Noise test code — Part 1: Common requirements |
ISO 11200:2014
|
Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
UNE-EN ISO 3743-2:2010
|
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
BS EN 13021 : 2003
|
WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
ISO 5135:1997
|
Acoustics Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
ISO 12001:1996
|
Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code |
ISO/TS 7849-1:2009
|
Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor |
BS EN ISO 9902-1 : 2001
|
TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS |
ISO 1680:2013
|
Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines |
ISO 9614-2:1996
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
ISO 15667:2000
|
Acoustics Guidelines for noise control by enclosures and cabins |
ISO 9614-1:1993
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
ISO 11957:1996
|
Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements |
UNE-EN ISO 3744:2011
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
BS EN 12354-5:2009
|
Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
ISO 4413:2010
|
Hydraulic fluid power General rules and safety requirements for systems and their components |
UNE-EN ISO 9614-3:2010
|
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
BS EN 285:2015
|
Sterilization. Steam sterilizers. Large sterilizers |
UNE-EN ISO 12001:2010
|
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
UNE-EN ISO 11546-2:2010
|
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
ISO 10439-1:2015
|
Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
ISO 3382-3:2012
|
Acoustics Measurement of room acoustic parameters Part 3: Open plan offices |
BS EN 13487:2003
|
Heat exchangers. Forced convection air cooled refrigerant condensers and dry coolers. Sound measurement |
BS EN ISO 3746:2009
|
Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane |
BS EN ISO 3743-1:2009
|
Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Comparison method for hard-walled test rooms |
IEC 62121:2001
|
Methods of measurement for minidisc recorders/players |
UNE-EN ISO 3743-1:2011
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
ISO 3382-2:2008
|
Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms |
UNE-EN ISO 3746:2010
|
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995) |
BS EN ISO 3747:2010
|
Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment |
BS EN ISO 11204:2010
|
Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
BS EN 13113 : 2002
|
TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
BS EN ISO 11200:2014
|
Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
ISO 11546-2:1995
|
Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes) |
BS EN ISO 4871:2009
|
Acoustics. Declaration and verification of noise emission values of machinery and equipment |
BS EN ISO 12001:2009
|
Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code |
UNE-EN ISO 3741:2011
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
UNE-EN 13113:2002
|
Tannery machines - Roller coating machines - Safety requirements. |
UNE-EN ISO 4871:2010
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
DIN EN ISO 9902-1:2014-10
|
TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014) |
IEC 61063:1991
|
Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery |
EN ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
EN 15067:2007
|
Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
EN ISO 11957:2009
|
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
EN ISO 15667 : 2000
|
ACOUSTICS - GUIDELINES FOR NOISE CONTROL BY ENCLOSURES AND CABINS |
EN ISO 9614-2 : 1996
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING |
EN 14656:2006+A1:2010
|
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
EN ISO 3745:2012/A1:2017
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017) |
EN ISO 2151:2008
|
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) |
EN ISO 3743-1:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
EN ISO 3743-2:2009
|
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
UNI EN 13021 : 2009
|
WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
EN ISO 12001:2009
|
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
EN ISO 11689:1996/AC:2009
|
Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007) |
EN ISO 10821:2005/A1:2009
|
Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01) |
EN 14824:2003
|
Space engineering - Testing |
EN ISO 9902-1:2001/A2:2014
|
TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001/AMD 2:2014) |
EN ISO 11201:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 10439-1:2015
|
Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
EN ISO 9614-1:2009
|
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
EN ISO 13482:2014
|
Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
EN ISO 4414:2010
|
Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
EN ISO 9906:2012
|
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
EN ISO 11553-3:2013
|
Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) |
EN 14681:2006+A1:2010
|
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
EN ISO 9614-3:2009
|
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
EN ISO 3741:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
EN ISO 4413:2010
|
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
EN ISO 1680:2013
|
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013) |
EN ISO 11546-1:2009
|
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
EN 14673:2006+A1:2010
|
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
EN ISO 5136:2009
|
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
EN ISO 11546-2:2009
|
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
EN ISO 3744:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 14677:2008
|
Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
EN 415-9:2009
|
Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
EN 16603-10-03:2014
|
Space engineering - Testing |
EN ISO 3747:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
EN ISO 4871:2009
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN 45510-4-5:2002
|
Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant |
EN ISO 11204:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
ISO 11204:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
10/30094845 DC : 0
|
BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS |
DIN EN 23742:1991-11
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS |
UNI EN ISO 13482 : 2014
|
ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS |
BS IEC 61366-7:1998
|
Hydraulic turbines, storage pumps, and pump turbines. Tendering documents Guidelines for technical specifications for storage pumps |
12/30240135 DC : 0
|
BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
BS EN 12102:2013
|
Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level |
DIN EN 23741:1991-11
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROAD-BAND SOURCES IN REVERBERATION ROOMS |
BS ISO 532-2:2017
|
Acoustics. Methods for calculating loudness Moore-Glasberg method |
ANSI S12.23 : 1989 : R2006
|
METHOD FOR THE DESIGNATION OF SOUND POWER EMITTED BY MACHINERY AND EQUIPMENT |
DIN EN ISO 11203:2010-01
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
BS IEC 61366-3:1998
|
Hydraulic turbines, storage pumps, and pump turbines. Tendering documents Guidelines for technical specifications for Pelton turbines |
BS EN 16228-1:2014
|
Drilling and foundation equipment. Safety Common requirements |
BS EN 45510-4-5:2002
|
Guide for the procurement of power station equipment. Boiler auxiliaries Coal handling and bulk storage plant |
03/306595 DC : 0
|
BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
BS EN ISO 4413:2010
|
Hydraulic fluid power. General rules and safety requirements for systems and their components |
DIN EN ISO 3745:2012-07
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
UNI EN ISO 11553-3 : 2013
|
SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) |
BS 4196-7:1988
|
Sound power levels of noise sources Survey method for determination of sound power levels of noise sources using a reference sound source |
02/123878 DC : DRAFT OCT 2002
|
BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
UNE-EN 415-9:2010
|
Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
17/30365068 DC : 0
|
BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
16/30333609 DC : 0
|
BS EN 15657 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
I.S. EN 12102-1:2017
|
AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS, PROCESS CHILLERS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 1: AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS FOR SPACE HEATING AND COOLING, DEHUMIDIFIERS AND PROCESS CHILLERS |
ISO 1680-2:1986
|
Acoustics Test code for the measurement of airborne noise emitted by rotating electrical machinery Part 2: Survey method |
DIN EN ISO 3746:2011-03
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
DIN EN 14677 E : 2008
|
SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
ANSI S12.53/1 : 2011
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM |
I.S. EN ISO 3382-2:2008
|
ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS |
I.S. EN 61096:1993
|
METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS |
I.S. EN 45510-6-4:2000
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS |
I.S. EN 14677:2008
|
SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
ANSI S12.53/2 : 1999 : R2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
ANSI S12.51:2012
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
ANSI/ASA S12.57 : 2011(R2016)
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT |
ANSI S12.51 : 2012 : R2017
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS |
ANSI S12.55 : 2012
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
ANSI/ASA S12.56/ISO 3746 : 2011(R2016)
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
ANSI S12.56 : 2011
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
EN 12102-1:2017
|
Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers |
ISO 13347-1:2004
|
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview |
DIN EN ISO 3743-1:2011-01
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
UNE-EN ISO 11201:2010
|
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) |
NF EN ISO 5135 : 1999
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE FROM AIR-TERMINAL DEVICES, AIR-TERMINAL UNITS, DAMPERS AND VALVES BY MEASUREMENT IN REVERBERATION ROOM |
DIN EN ISO 9614-1:2009-11
|
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
DIN EN ISO 3743-2:2009-11
|
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
BS EN 14824:2003
|
Space engineering. Testing |
BS EN ISO 11202:2010
|
Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
UNE-EN 285:2016
|
Sterilization - Steam sterilizers - Large sterilizers |
ISO/TS 7849-2:2009
|
Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor |
ISO 11690-1:1996
|
Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies |
ISO 2151:2004
|
Acoustics Noise test code for compressors and vacuum pumps Engineering method (Grade 2) |
BS EN 14656 : 2006
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
UNE-EN ISO 11957:2010
|
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
BS EN ISO 3745 : 2012
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
BS EN ISO 9614-2:1997
|
Acoustics. Determination of sound power levels of noise sources using sound intensity Measurement by scanning |
BS EN ISO 9614-3:2009
|
Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning |
ISO 4414:2010
|
Pneumatic fluid power General rules and safety requirements for systems and their components |
ISO 11201:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
BS EN 14681 : 2006
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
BS EN ISO 3743-2:1997
|
Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms |
DIN EN 12102:2013-10
|
AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
DIN EN 953:1997-11
|
SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
EN 61243-5:2001
|
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
DIN EN ISO 3745:2017-10
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
EN ISO 3382-3:2012
|
Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012) |
DIN EN ISO 12001:2010-01
|
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
DIN EN 15657:2017-10
|
ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS |
DIN EN 45510-4-5:2002-11
|
Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant |
DIN EN 953:2009-07
|
SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
DIN EN ISO 5136:2009-11
|
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
DIN EN ISO 11546-2:2010-01
|
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
UNE-EN ISO 11204:2010 V2
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
UNE-EN ISO 11202:2010 V2
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
BS 4196-3:1991
|
Sound power levels of noise sources Engineering methods for determination of sound power levels for sources in special reverberation test rooms |
UNE-EN 13023:2004
|
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |