Skip to content
Please enter a keyword to search

  • ISO 4126-1:2013

    Current The latest, up-to-date edition.

    Safety devices for protection against excessive pressure — Part 1: Safety valves

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  12-07-2013

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4126-1:2013 specifies general requirements for safety valves irrespective of the fluid for which they are designed.

    It is applicable to safety valves having a flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature.

    ISO 4126-1:2013 is a product standard and is not applicable to applications of safety valves.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 185
    Development Note Supersedes ISO 4126 (04/2001) Supersedes ISO/DIS 4126-1. (07/2013)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    14/30259637 DC : 0 BS EN ISO 21013-3 - CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION
    99/707163 DC : DRAFT APR 99 PREN 13480-6 - METALLIC INDUSTRIAL PIPING - PART 6: SAFETY SYSTEMS
    ISO 4126-9:2008 Safety devices for protection against excessive pressure Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices
    12/30261215 DC : 0 BS EN 13060 - SMALL STEAM STERILIZERS
    BS ISO 21013-1:2008 Cryogenic vessels. Pressure-relief accessories for cryogenic service Reclosable pressure-relief valves
    CSA B625 : 2013 PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS
    EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
    12/30262660 DC : DRAFT APR 2012 BS EN 61010-2-040 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS
    ISO 16923:2016 Natural gas fuelling stations — CNG stations for fuelling vehicles
    10/30234327 DC : DRAFT DEC 2010 BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
    11/30212367 DC : 0 BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
    03/311404 DC : 0 IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    CSA Z10083 : 2008 : R2013 OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    CSA Z10083 : 2008 OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    PREN 13060 : DRAFT 2012 SMALL STEAM STERILIZERS
    I.S. EN ISO 4126-3:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION
    CSA C22.2 No. 61010.2.040 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS
    I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
    I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    BS EN ISO 7396-1:2016 Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum
    ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
    ISO 10083:2006 Oxygen concentrator supply systems for use with medical gas pipeline systems
    UNE-EN ISO 21013-3:2016 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)
    DIN EN ISO 4126-6:2014-10 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO 4126-6:2014)
    DIN EN 13136:2013-12 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
    UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
    BS EN 12561-5:2011 Railway applications. Tank wagons Devices for vapour return while filling or emptying of liquid products
    BS EN 13731:2007 Lifting bag systems for fire and rescue service use. Safety and peformance requirements
    BS EN 13648-3:2002 Cryogenic vessels. Safety devices for protection against excessive pressure Determination of required discharge. Capacity and sizing
    BS EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for refrigerating equipment
    BS EN 13136 : 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
    BS EN 13648-1:2008 Cryogenic vessels. Safety devices for protection against excessive pressure Safety valves for cryogenic service
    BS EN 12416-1:2001 Fixed firefighting systems. Powder systems Requirements and test methods for components
    DIN EN 12828:2003-06 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
    DIN EN 13731:2008-02 Lifting bag systems for fire and rescue service use - Safety and performance requirements
    EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
    EN 12416-1:2001+A2:2007 Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
    EN 12561-5:2011 Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
    UNI EN 13136 : 2014 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
    07/30158997 DC : 0 BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
    BS ISO 4126-10:2010 Safety devices for protection against excessive pressure Sizing of safety valves for gas/liquid two-phase flow
    BS EN ISO 4126-3:2006 Safety devices for protection against excessive pressure Safety valves and bursting disc safety devices in combination
    14/30230935 DC : 0 BS EN ISO 4126-11 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 11: PERFORMANCE TESTING
    06/30154011 DC : DRAFT JULY 2006 ISO 21013-1 - CRYOGENIC VESSELS - PRESSURE RELIEF ACCESSORIES FOR - CRYOGENIC SERVICE - PART 1: RECLOSABLE PRESSURE RELIEF VALVES
    BS ISO 21013-3:2006 Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination
    08/30184286 DC : DRAFT SEP 2008 BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS
    BS EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
    I.S. EN 13060:2014 SMALL STEAM STERILIZERS
    I.S. EN 13136:2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
    EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    ISO 4126-7:2013 Safety devices for protection against excessive pressure — Part 7: Common data
    DIN EN 1012-2:2011-12 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
    DIN EN 1012-1:2011-02 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
    ISO 4126-3:2006 Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination
    BS EN ISO 4126-5 : 2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013)
    UNE-EN 12561-5:2012 Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
    EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)
    I.S. EN 13648-1:2008 CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE
    I.S. EN 1012-1:2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
    I.S. EN 12416-1:2001 FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    DIN EN ISO 4126-6:2004-04 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO 4126-6:2014)
    I.S. EN ISO 4126-5:2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013)
    I.S. EN 14129:2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
    I.S. EN ISO 4126-7:2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013)
    I.S. EN 12828:2012 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
    ONORM EN ISO 4126-3 : 2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION
    I.S. EN 12561-5:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
    I.S. EN ISO 4126-6:2014 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO 4126-6:2014)
    DIN EN ISO 4126-3:2006-06 Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)
    I.S. EN 1012-2:1996 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
    B342-15 Selection and use of UN pressure receptacles, multiple-element gas containers, and other pressure receptacles for the transport of dangerous goods, Class 2
    BS ISO 18154:2017 Ships and marine technology. Safety valve for cargo tanks of LNG carriers. Design and testing requirements
    I.S. EN ISO 21013-3:2016 CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION (ISO 21013-3:2016)
    BS EN ISO 16923:2018 Natural gas fuelling stations. CNG stations for fuelling vehicles
    13/30230940 DC : 0 BS EN ISO 4126-6 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES
    13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    13/30255929 DC : 0 BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM
    PREN ISO 4126-6 : DRAFT 2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO/DIS 4126-6:2013)
    13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    08/30156074 DC : DRAFT APR 2008 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
    BS ISO 4126-9:2008 Safety devices for protection against excessive pressure Application and installation of safety devices excluding stand-alone bursting disc safety devices
    BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
    BS ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
    09/30209618 DC : 0 BS ISO 5149-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    EN 13060:2014 Small steam sterilizers
    ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
    DIN EN ISO 7396-1:2016-09 MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016)
    ISO 21029-1:2018 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests
    ISO 4126-10:2010 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow
    ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
    DIN EN 12828:2014-07 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
    DIN EN 13648-1:2009-02 CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE
    DIN EN 13060:2015-03 SMALL STEAM STERILIZERS
    BS EN ISO 4126-7 : 2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013)
    UNE-EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
    18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
    ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
    CSA C22.2 No. 60335-2-40 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    UNI EN 1012-1 : 2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
    ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
    UNI EN ISO 4126-6 : 2014 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES
    UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
    UNI EN 12561-5 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
    UNI EN 14129 : 2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
    UNI EN 12828 : 2014 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
    UNI EN 1012-2 : 2009 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
    UNI EN 13648-1 : 2009 CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE
    13/30271404 DC : DRAFT DEC 2013 BS ISO 16923 - NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
    11/30240282 DC : DRAFT MAR 2011 BS EN 12828 - HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
    I.S. EN 61010-2-040:2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS
    07/30168572 DC : 0 BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    EEMUA 188 : 2009 GUIDE FOR ESTABLISHING OPERATING PERIODS OF SAFETY VALVES
    BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
    PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
    EN 13136:2013 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
    UNE-EN 13060:2015 Small steam sterilizers
    UNE-EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
    ISO 7396-1:2016 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
    DIN EN 12416-1:2007-09 FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    DIN EN 14129:2014-05 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
    ISO 21013-3:2016 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination
    BS EN 14129:2014 LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels
    IEC 61010-2-011:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
    ISO 4126-6:2014 Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices
    ISO 4126-5:2013 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS)
    IEC 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    UNE-EN ISO 4126-6:2015 Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014)
    11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
    BS EN 13060 : 2014 SMALL STEAM STERILIZERS
    ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
    BS EN 378-2:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
    BS EN ISO 4126-6:2014 Safety devices for protection against excessive pressure Application, selection and installation of bursting disc safety devices
    UNE-EN ISO 4126-5:2014 Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)
    09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
    BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
    BS EN 1012-2 : 1997 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
    EN ISO 4126-7:2013/A1:2016 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013/AMD 1:2016)
    EN 13648-1:2008 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
    EN ISO 4126-6:2014 Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014)
    EN ISO 16923:2018 Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016)
    EN ISO 4126-5:2013/A1:2016 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013/AMD 1:2016)
    EN 13648-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
    EN ISO 21013-3:2016 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)
    EN ISO 13631:2002 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
    EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
    EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
    EN 1012-2:1996+A1:2009 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
    EN 13731:2007 Lifting bag systems for fire and rescue service use - Safety and performance requirements
    DIN ISO 10083:2008-12 OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    04/30112263 DC : 0 PREN ISO 4126-3 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION
    ISO 21013-1:2008 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves
    PREN 13480-6 : DRAFT 99 METALLIC INDUSTRIAL PIPING - PART 6: SAFETY SYSTEM
    06/30155498 DC : DRAFT AUG 2006 ISO 4126-10 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 10: SIZING OF SAFETY VALVES AND CONNECTED INLET AND OUTLET LINES FOR GAS/LIQUID TWO-PHASE FLOW
    I.S. EN ISO 7396-1:2016 MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016)
    BS ISO 14617-8:2002 Graphical symbols for diagrams Valves and dampers
    13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
    17/30358655 DC : 0 BS EN 13136 - REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
    ISO 18154:2017 Ships and marine technology — Safety valve for cargo tanks of LNG carriers — Design and testing requirements
    BS ISO 16923 : 2016 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
    BS EN ISO 21013-3:2016 Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination
    04/30084855 DC : 0 PREN ISO 10083 - OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    UNE-EN 13136:2014 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
    ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
    CSA C22.2 No. 61010-2-011 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT
    I.S. EN ISO 16923:2018 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
    ISO 5149-2:2014 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation
    UNE-EN ISO 4126-7:2014 Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013)
    DIN EN 12561-5:2011-10 Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
    BS ISO 5149-2:2014 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
    BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
    BS EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors
    BS EN 12828 : 2012 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
    ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
    DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
    BS EN 1012-1:2010 Compressors and vacuum pumps. Safety requirements Air compressors
    EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
    I.S. EN 61010-2-011:2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT
    UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
    EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
    EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
    UNE-EN 1012-2:1996 COMPRESSORS AND VACUUM PUMPS. SAFETY REQUIREMENTS. PART 2: VACUUM PUMPS.

    Standards Referencing This Book - (Show below) - (Hide below)

    SA TS 19883:2020 Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD)
    ISO 4126-7:2013 Safety devices for protection against excessive pressure — Part 7: Common data
    ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
    AS 19880.3:2020 Gaseous hydrogen - Fuelling stations Valves (ISO 19880-3:2018, MOD)
    ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
    API 527 : 2014 SEAT TIGHTNESS OF PRESSURE RELIEF VALVES
    1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective