13/30269763 DC : 0
|
BS ISO 4250-1 - EARTH-MOVER TYRES AND RIMS - PART 1: TYRE DESIGNATION AND DIMENSIONS |
BS 3M 45-1:1994
|
Aircraft tyres and rims Specifications |
BS AU50-1.6.1A(1995) : AMD 10594
|
TYRES AND WHEELS - TYRES - MOTORCYCLE TYRES - SPECIFICATION FOR GENERAL REQUIREMENTS AND DESIGN GUIDE FOR DESIGNATIONS, DIMENSIONS AND LOAD RATINGS FOR METRIC SERIES TYRES |
BS AU 50-1.6.2c:2002
|
Tyres and wheels. Tyres. Motorcycle tyres Specification for designations, dimensions and load ratings for metric series 100, 90, 80, 70, 60, 55 and 50 tyres |
ISO 4251-4:2010
|
Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 4: Tyre classification and nomenclature |
03/318840 DC : DRAFT NOV 2003
|
ISO 7867-1 - TYRES AND RIMS (METRIC SERIES) FOR AGRICULTURAL TRACTORS AND MACHINES - PART 1: TYRES DESIGNATION, DIMENSIONS, MARKING AND TYRE AND RIM COORDINATION |
03/317272 DC : DRAFT OCT 2003
|
ISO 4251-1 - TYRES (PLY RATING MARKED SERIES) AND RIMS FOR AGRICULTURAL TRACTORS AND MACHINES - PART 1: TYRE DESIGNATION AND DIMENSIONS AND APPROVED RIM CONTOURS |
BS AU 50-1.0.1:1999
|
Tyres and wheels. Tyres. General Method of test for measuring tyre uniformity |
BS 3558-1:1997
|
Glossary of rubber terms International terms |
BS 4M 45-1:1998
|
Aircraft tyres and rims Specifications |
17/30357723 DC : 0
|
BS ISO 8664 - TYRES FOR AGRICULTURAL TRACTORS AND MACHINES - CODE-DESIGNATED AND SERVICE-DESCRIPTION MARKED RADIAL DRIVE-WHEEL TYRES |
BS ISO 4250-2:2017
|
Earth-mover tyres and rims Loads and inflation pressures |
16/30325028 DC : 0
|
BS ISO 29802 - ALL TERRAIN (AT) TYRES AND RIMS - SYMBOL MARKED PNEUMATIC TYRES ON 5 DEGREES TAPERED RIMS - DESIGNATION, DIMENSION, MARKING AND LOAD RATINGS |
S.R. CEN/TS 17045:2017
|
MATERIALS OBTAINED FROM END OF LIFE TYRES - QUALITY CRITERIA FOR THE SELECTION OF WHOLE TYRES, FOR RECOVERY AND RECYCLING PROCESSES |
BS ISO 5775-1:2014
|
Bicycle tyres and rims Tyre designations and dimensions |
13/30269760 DC : 0
|
BS ISO 4250-2 - EARTH-MOVER TYRES AND RIMS - PART 2: LOADS AND INFLATION PRESSURES |
BS AU 50-1.3.3:1996
|
Specification for tyres and wheels. Tyres. Off-the-road tyres Specification for tyres for mobile cranes and similar specialized machines |
BS AU 50-1.2.4:1994
|
Tyres and wheels. Tyres. Commercial vehicle tyres Method of test for verifying tyre capabilities |
BS AU 50-1.4.4b:1992
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for ply rating marked series tyres for log skidders - Agricultural tractor and machine tyres Specification for ply rating marked series tyres for logging and forestry service |
BS ISO 10571:2016
|
Tyres for mobile cranes and similar specialized machines |
BS AU 50-1.5.2:1994
|
Tyres and wheels. Tyres. Industrial vehicle tyres Specification for pneumatic tyres (metric series) on 5° tapered or flat base rims: designation, dimensions and marking |
03/317273 DC : DRAFT OCT 2003
|
ISO 4251-2 - TYRES (PLY RATING MARKED SERIES) AND RIMS FOR AGRICULTURAL TRACTORS AND MACHINES - PART 2: TYRE LOAD RATINGS |
17/30357689 DC : 0
|
BS ISO 7867-1 - METRIC SERIES FOR AGRICULTURAL, FORESTRY MACHINES AND CONSTRUCTION TYRES - PART 1: TYRE DESIGNATION, DIMENSIONS AND MARKING, AND TYRE/RIM COORDINATION |
03/317271 DC : DRAFT OCT 2003
|
BS ISO 8664 - AGRICULTURAL TRACTOR DRIVE-WHEEL TYRES - SERVICE DESCRIPTION (LOAD INDEX, SPEED SYMBOL) MARKING |
03/318841 DC : DRAFT NOV 2003
|
ISO 7867-2 - TYRES AND RIMS (METRIC SERIES) FOR AGRICULTURAL TRACTORS AND MACHINES - PART 2: SERVICE DESCRIPTION AND LOAD RATINGS |
ISO 13442:2004
|
Tyres and rims for construction machines |
ISO 13327:1998
|
Motorcycle tyres Method of measuring rolling resistance |
ISO 5751-1:2010
|
Motorcycle tyres and rims (metric series) — Part 1: Design guides |
ISO 13325:2003
|
Tyres Coast-by methods for measurement of tyre-to-road sound emission |
NF ISO 28580 : 2009
|
PASSENGER CAR, TRUCK AND BUS TYRES - METHODS OF MEASURING ROLLING RESISTANCE - SINGLE POINT TEST AND CORRELATION OF MEASUREMENT RESULTS |
ISO 7867-2:2005
|
Tyres and rims (metric series) for agricultural tractors and machines Part 2: Service description and load ratings |
BS ISO 10231 : 2003
|
MOTORCYCLE TYRES - TEST METHODS FOR VERIFYING TYRE CAPABILITIES |
13/30289446 DC : 0
|
BS ISO 18805 - TYRE CLASSIFICATION |
BS AU 50-1.6.1c:2002
|
Tyres and wheels. Tyres. Motorcycle tyres Specification of general requirements and design guide for designations, dimensions and load ratings for metric series tyres - Section 6: Motorcycle tyres Subsection 6.1c: Specification for general requirements and design guide for designations, dimensions and load-carrying capacity for metric series tyres |
BS AU 50-1.4.3a:1992
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for classification codes and nomenclature for ply rating marked series tyres |
17/30310686 DC : 0
|
BS ISO 19940 - TYRE STIFFNESS INDEX TESTING PROCEDURE FOR PASSENGER EXTENDED MOBILITY AND RUN FLAT TYRES |
17/30343012 DC : 0
|
BS ISO 4250-2 - EARTH-MOVER TYRES AND RIM - PART 2: LOADS AND INFLATION PRESSURES |
BS AU 50-1.4.5:1992
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for designations, dimensions and marking for metric series tyres |
11/30246871 DC : DRAFT MAY 2011
|
BS ISO 4000-1 - PASSENGER CAR TYRES AND RIMS - PART 1: TYRES (METRIC SERIES) |
11/30218005 DC : 0
|
BS ISO 3324-2 - AIRCRAFT TYRES AND RIMS - PART 2: TEST METHODS FOR TYRES |
BS ISO 29802:2017
|
All-terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5° tapered rims. Designation, dimension, marking and load ratings |
BS AU 50-1.3.1a:1991
|
Specification for tyres and wheels. Tyres. Off-the-road tyres Specification for narrow and wide base tyre designations and dimensions |
BS ISO 5751-2:2010
|
Motorcycle tyres and rims (metric series) Tyre dimensions and load-carrying capacities |
BS AU 50-1.6.2:1989
|
Tyres and wheels. Tyres. Motorcycle tyres Specification for designations, dimensions and load ratings for metric series 100, 90, 80, 70 and 60 tyres |
14/30295079 DC : 0
|
BS ISO 23671 - PASSENGER CAR TYRES - METHOD FOR MEASURING RELATIVE WET GRIP PERFORMANCE - LOADED NEW TYRES |
BS AU 50-1.4.1b:1998
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for designation and dimensions for ply rating marked series tyres |
BS ISO 3324-2:2013
|
Aircraft tyres and rims Test methods for tyres |
BS ISO 9112:2008
|
Truck and bus tyres. Methods of measuring tyre rolling circumference. Loaded new tyres |
BS ISO 16833:2006
|
Road vehicles. Wheels. Measurement of radial and lateral run-out |
08/30182686 DC : DRAFT MAY 2008
|
BS ISO 4251-4 - TYRES (PLY RATING MARKED SERIES) AND RIMS FOR AGRICULTURAL TRACTORS AND MACHINES - PART 4: TYRE CLASSIFICATION AND NOMENCLATURE |
16/30343009 DC : 0
|
BS ISO 4250-1 - EARTH-MOVER TYRES AND RIMS - PART 1: TYRE DESIGNATION AND DIMENSIONS |
BS AU 50-1.4.6:1996
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for service description and load ratings for metric series tyres |
ISO 3324-1:2013
|
Aircraft tyres and rims Part 1: Specifications |
ISO 7867-1:2005
|
Tyres and rims (metric series) for agricultural tractors and machines Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination |
ISO 5775-1:2014
|
Bicycle tyres and rims — Part 1: Tyre designations and dimensions |
ISO 3739-1:2007
|
Industrial tyres and rims — Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and marking |
ISO 4000-1:2015
|
Passenger car tyres and rims Part 1: Tyres (metric series) |
NF ISO 8664 : 2005 AMD 1 2010
|
TYRES FOR AGRICULTURAL TRACTORS AND MACHINES - CODE-DESIGNATED AND SERVICE DESCRIPTION MARKED, RADIAL DRIVE-WHEEL TYRES |
NF ISO 7867-1 : 2005
|
TYRES AND RIMS (METRIC SERIES) FOR AGRICULTURAL TRACTORS AND MACHINES - PART 1: TYRE DESIGNATION, DIMENSIONS, MARKING AND TYRE/RIM COORDINATION |
ISO 4251-2:2017
|
Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 2: Tyre load ratings |
BS AU 50-1.1.1c:2001
|
Tyres and wheels. Tyres. Car tyres Tyres (metric series) |
NF ISO 4209-1 : 2007
|
TRUCK AND BUS TYRES AND RIMS (METRIC SERIES) - PART 1: TYRES |
ISO 29802:2017
|
All-terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degree tapered rims — Designation, dimension, marking and load ratings |
ISO 23671:2015
|
Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres |
BS 6102-5:1998
|
Cycles Specification for bicycle tyre designations and dimensions |
BS 6102-5:1996
|
Cycles Specification for bicycle tyre designations and dimensions |
BS ISO 5751-1:2010
|
Motorcycle tyres and rims (metric series) Design guides |
BS ISO 15222:2011
|
Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres |
NF ISO 5751-1 : 2011
|
MOTORCYCLES TYRES AND RIMS (METRIC SERIES) - PART 1: DESIGN GUIDES |
17/30318200 DC : 0
|
BS ISO 28580 - TYRE ROLLING RESISTANCE MEASUREMENT METHOD - SINGLE POINT TEST AND MEASUREMENT RESULT CORRELATION - DESIGNED TO FACILITATE INTERNATIONAL COOPERATION AND, POSSIBLY, REGULATION BUILDING |
BS AU 50-1.6.6b:1998
|
Tyres and wheels. Tyres. Motorcycle tyres Method of test for verifying tyre capabilities |
BS AU50-1.6.2A(1995) : AMD 9987
|
TYRES AND WHEELS - TYRES - MOTORCYCLE TYRES - SPECIFICATION FOR DESIGNATIONS, DIMENSIONS AND LOAD RATINGS FOR METRIC SERIES 100, 90, 80, 70, 60, 55 AND 50 TYRES |
BS AU50-1.4A(1996) : AMD 10362
|
TYRES AND WHEELS - TYRES - CAR TYRES - METHOD OF TEST FOR VERIFYING TYRE CAPABILITIES |
ISO 4209-1:2001
|
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
BS AU 50-1.4.5a:1996
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for designations, dimensions, marking and tyre/rim coordination for metric series tyres |
BS AU 50-1.4.2a:1993
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for load ratings for ply rating marked series tyres |
ISO 4250-1:2017
|
Earth-mover tyres and rims — Part 1: Tyre designation and dimensions |
ISO 3739-2:1992
|
Industrial tyres and rims — Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings |
BS ISO 23671:2015
|
Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres |
BS AU 50-1.4.1a:1993
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for designations and dimensions for ply rating marked series tyres |
15/30315430 DC : 0
|
BS ISO 10571 - TYRES FOR MOBILE CRANES AND SIMILAR SPECIALIZED MACHINES |
BS ISO 18805:2017
|
Tyre classification. Agricultural, forestry and construction machines |
BS ISO 4251-4:2010
|
Tyres (ply rating marked series) and rims for agricultural tractors and machines Tyre classification and nomenclature |
NF ISO 5751-2 : 2011
|
MOTORCYCLES TYRES AND RIMS (METRIC SERIES) - PART 2: TYRE DIMENSIONS AND LOAD CARRYING CAPACITIES |
04/30084609 DC : DRAFT APR 2004
|
ISO 18164 - TRUCK, BUS, PASSENGER-CAR AND MOTORCYCLE TYRES - METHODS OF MEASURING ROLLING RESISTANCE |
BS ISO 13988:2008
|
Passenger vehicle wheels. Clip balance weight and rim flange nomenclature, test procedures and performance requirements |
17/30357692 DC : 0
|
BS ISO 7867-2 - METRIC SERIES FOR AGRICULTURAL, FORESTRY MACHINES AND CONSTRUCTION TYRES - PART 2: LOAD RATINGS FOR AGRICULTURAL TYRES |
BS ISO 4000-1:2015
|
Passenger car tyres and rims Tyres (metric series) |
BS AU 50-1.6.2b:1995
|
Tyres and wheels. Tyres. Motorcycle tyres Specification for designations, dimensions and load ratings for metric series 100, 90, 80, 70, 60, 55 and 50 tyres |
BS AU 50-1.6.8:2000
|
Tyres and wheels. Tyres. Motorcycle tyres Method of measuring tyre rolling circumference for new tyres under loaded conditions - Section 6: Motorcycle tyres Subsection 6.8: Method for measuring tyre rolling circumference for new tyres under loaded conditions |
ISO 5751-2:2010
|
Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities |
BS AU 50-1.6.7:1998
|
Tyres and wheels. Tyres. Motorcycle tyres Method of test for measuring rolling resistance |
ISO 10191:2010
|
Passenger car tyres Verifying tyre capabilities Laboratory test methods |
ISO 18164:2005
|
Passenger car, truck, bus and motorcycle tyres — Methods of measuring rolling resistance |
ISO 13988:2008
|
Passenger vehicle wheels — Clip balance weight and rim flange nomenclature, test procedures and performance requirements |
ISO 10571:2016
|
Tyres for mobile cranes and similar specialized machines |
NF ISO 29802 : 2010
|
ALL TERRAIN (AT) TYRES AND RIMS - SYMBOL MARKED PNEUMATIC TYRES ON 5 DEGREES TAPERED RIMS - DESIGNATION, DIMENSION, MARKING AND LOAD RATINGS |
CEN/TS 17045:2017
|
Materials obtained from end of life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes |
BS ISO 7867-2 : 2005
|
TYRES AND RIMS (METRIC SERIES) FOR AGRICULTURAL TRACTORS AND MACHINES - PART 2: SERVICE DESCRIPTION AND LOAD RATINGS |
BS AU 50-1.2.1b:2001
|
Tyres and wheels. Tyres. Commercial vehicle tyres Tyres |
PD CEN/TS 17045:2017
|
Materials obtained from end of life tyres. Quality criteria for the selection of whole tyres, for recovery and recycling processes |
BS ISO 7867-1:2005
|
Tyres and rims (metric series) for agricultural tractors and machines Tyre designation, dimensions and marking, and tyre/rim coordination |
14/30292935 DC : 0
|
BS ISO 4000-1 - PASSENGER CAR TYRES AND RIMS - PART 1: TYRES (METRIC SERIES) |
BS ISO 3739-1:2007
|
Industrial tyres and rims Pneumatic tyres (metric series) on 5° tapered on flat base rims. Designation, dimensions and marking |
09/30202633 DC : 0
|
BS ISO 5751-1 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 1: DESIGN GUIDES |
BS AU 50-1.4.2b:1999
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for load ratings for ply rating marked series tyres |
ISO 18805:2017
|
Tyre classification — Agricultural, forestry and construction machines |
04/30117547 DC : DRAFT AUG 2004
|
ISO 3739-1 - INDUSTRIAL TYRES AND RIMS - PART 1 - PNEUMATIC TYRES (METRIC SERIES) ON 5 DEGREES TAPERED OR FLAT-BASED RIMS - DESIGNATION, DIMENSIONS AND MARKING |
BS AU50-1.4.4A(1992) : AMD 10363
|
TYRES AND WHEELS - TYRES - AGRICULTURAL TRACTOR AND MACHINE TYRES - SPECIFICATION FOR PLY RATING MARKED SERIES TYRES FOR LOG SKIDDERS |
13/30289449 DC : 0
|
BS ISO 18807 - TYRES AND RIMS FOR LOGGING AND FORESTRY SERVICE |
BS AU 50-1.6.3a:1995
|
Tyres and wheels. Tyres. Motorcycle tyres Specifications for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres |
07/30162393 DC : 0
|
BS ISO 9112 - TRUCK AND BUS TYRES - METHODS OF MEASURING TYRE ROLLING CIRCUMFERENCE - LOADED NEW TYRES |
ISO 3324-2:2013
|
Aircraft tyres and rims Part 2: Test methods for tyres |
BS AU50-1.4(1994) : 1994
|
TYRES AND WHEELS - TYRES - CAR TYRES - METHOD OF TEST FOR VERIFYING TYRE CAPABILITIES |
BS 6102-5:1990
|
Cycles Specification for bicycle tyre designations and dimensions |
BS AU50-1.6.6A(1998) : AMD 10832
|
TYRES AND WHEELS - TYRES - MOTORCYCLE TYRES - METHOD OF TEST FOR VERIFYING TYRE CAPABILITIES |
05/30115160 DC : DRAFT APR 2005
|
ISO 23671 - PASSENGER CAR TYRES - METHOD FOR MEASURING RELATIVE WET GRIP PERFORMANCE - LOADED NEW TYRES |
BS AU 50-1.4.4:1989
|
Tyres and wheels. Tyres. Agricultural tractor and machine tyres Specification for existing (inch) series of diagonal tyres for log skidders |
13/30279389 DC : 0
|
BS ISO 4251-2 - TYRES (PLY RATING MARKED SERIES) AND RIMS FOR AGRICULTURAL TRACTORS AND MACHINES - PART 2: TYRE LOAD RATINGS |
07/30174665 DC : DRAFT DEC 2007
|
BS ISO 29802 - ALL TERRAIN (AT) TYRES AND RIMS - SYMBOL MARKED PNEUMATIC TYRES ON 5 DEGREES TAPERED RIMS - DESIGNATION, DIMENSION, MARKING AND LOAD RATINGS |
BS ISO 1382:2012
|
Rubber. Vocabulary |
03/312563 DC : DRAFT JULY 2003
|
ISO 5751-1 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 1: DESIGN GUIDES |
NF ISO 10191 : 2010
|
PASSENGER CAR TYRES - VERIFYING TYRE CAPABILITIES - LABORATORY TEST METHODS |
09/30191615 DC : 0
|
BS ISO 4000-1 - PASSENGER CAR TYRES AND RIMS - PART 1: TYRES (METRIC SERIES) |
BS ISO 4251-2:2017
|
Tyres (ply rating marked series) and rims for agricultural tractors and machines Tyre load ratings |
ISO 13328:2000
|
Motorcycle tyres — Measurement of tyre rolling circumference — Loaded new tyres |
BS ISO 28580:2009
|
Passenger car, truck and bus tyres. Methods of measuring rolling resistance. Single point test and correlation of measurement results |
ISO 4251-1:2017
|
Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 1: Tyre designation and dimensions, and approved rim contours |
BS ISO 4251-1:2017
|
Tyres (ply rating marked series) and rims for agricultural tractors and machines Tyre designation and dimensions, and approved rim contours |
ISO 1382:2012
|
Rubber Vocabulary |
ISO 9112:2008
|
Truck and bus tyres Methods of measuring tyre rolling circumference Loaded new tyres |
ISO 28580:2009
|
Passenger car, truck and bus tyres Methods of measuring rolling resistance Single point test and correlation of measurement results |
ISO 8664:2005
|
Tyres for agricultural tractors and machines Code-designated and service-description marked radial drive-wheel tyres |
ISO 15222:2011
|
Truck and bus tyres Method for measuring relative wet grip performance Loaded new tyres |
BS 2M 45-1:1986
|
Aircraft tyres and rims Specification for new tyres, retreads and rims |
BS AU 50.1.1.2(2001) : 2001
|
TYRES AND WHEELS - TYRES - CAR TYRES - METHODS FOR MEASURING ROLLING CIRCUMFERENCE - LOADED NEW TYRES |
09/30202636 DC : 0
|
BS ISO 5751-2 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 2: TYRE DIMENSIONS AND LOAD-CARRYING CAPACITIES |
01/707359 DC : DRAFT APR 2001
|
ISO/DIS 13325 - TYRES - COAST-BY-METHOD FOR MEASUREMENT OF TYRE/ROAD SOUND EMISSION |
BS ISO 8664 : 2005
|
TYRES FOR AGRICULTURAL TRACTORS AND MACHINES - CODE-DESIGNATED AND SERVICE-DESCRIPTION MARKED RADIAL DRIVE-WHEEL TYRES |
BS AU 50-1.5.3:1994
|
Tyres and wheels. Tyres. Industrial vehicle tyres Specification for pneumatic tyres (metric series) on 5° tapered or flat base rims: load ratings |
BS AU 50-1.7.1:1989
|
Tyres and wheels. Tyres. Moped tyres Specification for tyre designations, dimensions and load ratings |
99/717526 DC : DRAFT DEC 1999
|
ISO/DIS 10191 - PASSENGER CAR TYRES - VERIFYING TYRE CAPABILITIES - LABORATORY TEST METHODS |
BS ISO 10191:2010
|
Passenger car tyres. Verifying tyre capabilities. Laboratory test methods |
BS AU 50-1.6.1:1989
|
Tyres and wheels. Tyres. Motorcycle tyres Specification for general requirements for designations, dimensions and load ratings for metric series tyres |
BS ISO 3324-1:2013
|
Aircraft tyres and rims Specifications |
BS AU 50-1.1.4b:1996
|
Tyres and wheels. Tyres. Car tyres Method of test for verifying tyre capabilities |
BS AU 50-1.2.1a:1995
|
Tyres and wheels. Tyres. Commercial vehicle tyres Specification for metric series tyres |
BS ISO 4250-1:2017
|
Earth-mover tyres and rims Tyre designation and dimensions |
11/30218008 DC : 0
|
BS ISO 3324-1 - AIRCRAFT TYRES AND RIMS - PART 1: SPECIFICATIONS |
04/30064834 DC : DRAFT JUL 2004
|
ISO 16833 - ROAD VEHICLES - WHEELS - MEASUREMENT OF RADIAL AND LATERAL RUN-OUT |
BS AU50-1.1A(1995) : 1995
|
TYRES AND WHEELS - TYRES - CAR TYRES - SPECIFICATION FOR METRIC SERIES TYRES |
BS AU 50-1.6.6:1993
|
Tyres and wheels. Tyres. Motorcycle tyres Method of test for verifying tyre capabilities |
03/312564 DC : DRAFT JULY 2003
|
ISO 5751-2 - MOTORCYCLE TYRES AND RIMS (METRIC SERIES) - PART 2: TYRE DIMENSIONS AND LOAD-CARRYING CAPACITIES |
05/30112458 DC : DRAFT MAY 2005
|
ISO 16992 - PASSENGER CAR TYRES - SPARE UNIT SUBSTITUTIVE EQUIPMENT - SUSE |
BS ISO 18164:2005
|
Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance |
GOST R ISO 4000-1 : 2005 AMD 1 2010
|
PASSENGER CAR TYRES AND RIMS - PART 1: TYRES (METRIC SERIES) |
08/30162351 DC : DRAFT JUNE 2008
|
BS ISO 28580 - PASSENGER CAR, TRUCK AND BUS TYRES - METHODS OF MEASURING ROLLING RESISTANCE - SINGLE POINT TEST AND CORRELATION OF MEASUREMENT RESULTS |
SAE J 2047 : 2013
|
TIRE PERFORMANCE TERMINOLOGY |
BS 3M 45-2:1998
|
Aircraft tyres and rims Test methods for tyres |
ISO 6054-1:1994
|
Motorcycle tyres and rims (Code-designated series) Diameter codes 4 to 12 Part 1: Tyres |
ISO 16833:2006
|
Road vehicles Wheels Measurement of radial and lateral run-out |
ISO 4250-2:2017
|
Earth-mover tyres and rims — Part 2: Loads and inflation pressures |
ISO 13326:1998
|
Test methods for measuring tyre uniformity |
NF ISO 4251-4 : 2010
|
TYRES (PLY RATING MARKED SERIES) AND RIMS FOR AGRICULTURAL TRACTORS AND MACHINES - PART 4: TYRE CLASSIFICATION AND NOMENCLATURE |
ISO 10231:2003
|
Motorcycle tyres — Test methods for verifying tyre capabilities |