Skip to content
Please enter a keyword to search

  • ISO 4302:2016

    Current The latest, up-to-date edition.

    Cranes — Wind load assessment

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  19-09-2016

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4302:2016 specifies the assessment of wind loads on cranes.

    It establishes general methods for calculating wind loads (for in-service and out-of-service conditions), which are included in the load combinations stated in ISO 8686-1 and used for proofs of competence such as those given in ISO 20332 for the structural components of cranes.

    It provides a simplified method of calculation and assumes that

    - the wind may blow horizontally from any direction,

    - the wind blows at a constant speed,

    - there is a static reaction to the wind load applied to the crane structure.

    It includes built-in allowances for the effects of gusting (fluctuation in wind speed) and for dynamic response.

    It gives guidance on when to secure the crane for out-of-service conditions.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 96/SC 10
    Development Note Supersedes ISO/DIS 4302. (09/2016)
    Document Type Standard
    Product Note THIS STANDARD ALSO REFERS TO- ISO 4306
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    17/30325088 DC : 0 BS ISO 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES
    11/30243784 DC : 0 BS ISO 8686-1 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 1: GENERAL
    15/30281554 DC : 0 BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
    BS ISO 10896-2:2016 Rough-terrain trucks. Safety requirements and verification Slewing trucks
    CSA B354.5 : 2007 : R2016 MAST-CLIMBING WORK PLATFORMS
    CSA B354.1:2004 PORTABLE ELEVATING WORK PLATFORMS
    95/540011 DC : DRAFT JAN 1995 PREN 1777 - HIGH-RISE AERIAL APPLIANCES - HYDRAULIC PLATFORMS FOR FIRE SERVICES - SAFETY REQUIREMENTS AND TESTING
    ISO 18758-2:2018 Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
    ISO 8686-2:2004 Cranes Design principles for loads and load combinations Part 2: Mobile cranes
    DIN EN 1459-2 E : 2016 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
    B354.12-17 Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs)
    DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
    DIN EN 1495:2009-12 Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009)
    UNE-EN 12159:2013 Builders hoists for persons and materials with vertically guided cages
    BS EN 14044:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods
    BS EN 280 : 2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    BS EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
    I.S. EN 14043:2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
    UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    EN 16228-1:2014 Drilling and foundation equipment - Safety - Part 1: Common requirements
    DIN EN 791:2010-01 DRILL RIGS - SAFETY
    NF EN 12158-1 : 2000 + A1 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    ISO 8686-4:2005 Cranes Design principles for loads and load combinations Part 4: Jib cranes
    BS EN 45510-6-8:2000 Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes
    17/30341100 DC : 0 BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
    02/708844 DC : DRAFT JULY 2002 ISO/DIS 16368.4 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, SAFETY REQUIREMENTS AND TEST METHODS
    UNI EN 16228-1 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
    93/711895 DC : DRAFT AUG 1993 ISO/DIS 12485-3 - CRANES - STABILITY REQUIREMENTS - PART 3: TOWER CRANES
    04/30108591 DC : DRAFT JAN 2004 ISO 8686-4 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS
    BS 7171:1989 Specification for mobile elevating work platforms
    09/30201429 DC : 0 BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS
    CSA B354.4 : 2002 : R2013 SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS
    CSA B354.4 : 2002 : R2007 : FR SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS
    ISO 12210-1:1998 Cranes Anchoring devices for in-service and out-of-service conditions Part 1: General
    I.S. EN 1459-2:2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
    ISO 10896-2:2016 Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
    ISO 10972-3:2003 Cranes Requirements for mechanisms Part 3: Tower cranes
    B354.9-17 Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs)
    ISO/TR 25599:2005 Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations
    DIN EN 1777:2010-06 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
    DIN EN 12159:2013-03 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    UNE-EN 1777:2011 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
    I.S. EN 12158-2:2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    I.S. EN 12158-1:2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    I.S. EN 1777:2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
    I.S. EN 14044:2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
    I.S. EN 12159:2012 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    I.S. EN 280:2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    I.S. EN 1495:1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    ISO 8686-3:1998 Cranes Design principles for loads and load combinations Part 3: Tower cranes
    PD ISO/TR 19961:2010 Cranes. Safety code on mobile cranes
    00/541673 DC : DRAFT NOV 2000 BS EN 14044 - SEMI-AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS
    14/30318963 DC : DRAFT DEC 2014 BS EN 61057 - LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS
    93/702540 DC : DRAFT FEB 1993 ISO/DIS 12210-4 - CRANES - OUT OF SERVICE ANCHORING DEVICES - PART 4: JIB CRANES
    11/30249027 DC : 0 BS ISO 15442 - CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES
    14/30295634 DC : 0 BS EN 16719 - TRANSPORT PLATFORMS
    BS ISO 4305 : 2014 MOBILE CRANES - DETERMINATION OF STABILITY
    DIN EN 16228-1:2014-10 Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014
    CSA B354.1 : 2004 : R2011 PORTABLE ELEVATING WORK PLATFORMS
    ISO 16369:2007 Elevating work platforms Mast-climbing work platforms
    EN 61057:2017 Live working - Insulating aerial devices for mounting on a chassis
    I.S. EN 61057:2017 LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS
    I.S. EN 16719:2018 TRANSPORT PLATFORMS
    EN 1459-2:2015 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
    ISO 4305:2014 Mobile cranes — Determination of stability
    DIN EN 12158-2:2011-04 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010)
    BS EN 1495 : 1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 1495 : 2009 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 12159 : 2013 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    UNI EN 791 : 2009 DRILL RIGS - SAFETY
    UNI EN 996 : 2009 PILING EQUIPMENT - SAFETY REQUIREMENTS
    UNI EN 1777 : 2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
    EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 14043 : 2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
    UNI EN 12158-2 : 2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    UNI EN 14044 : 2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
    BS ISO 16368:2003 Mobile elevating work platforms. Design calculations, safety requirements and test methods
    BS ISO 15442:2012+A1:2015 Cranes. Safety requirements for loader cranes
    I.S. CEN TS 15398:2006 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS
    ISO 8686-5:2017 Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes
    11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    93/702546 DC : DRAFT FEB 1993 ISO/DIS 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES
    CEI UNI EN 45510-6-8 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES
    BS EN 16228-1:2014 Drilling and foundation equipment. Safety Common requirements
    04/102837 DC : DRAFT JAN 2004 ISO 9926-3 - CRANES - TRAINING OF DRIVERS - PART 3: TOWER CRANES
    BS ISO 9926-3:2016 Cranes. Training of operators Tower cranes
    00/541672 DC : DRAFT NOV 2000 BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS
    14/30313865 DC : 0 BS ISO 9926-3 - CRANES - TRAINING OF OPERATORS - PART 3: TOWER CRANES
    05/30082472 DC : DRAFT AUG 2005 BS 7121-1 - CODE OF PRACTICE FOR SAFE USE OF CRANES - PART 1: GENERAL
    BS EN 61057:1994 Aerial devices with insulating boom used for live working exceeding 1 kV a.c.
    PD ISO/TR 25599:2006 Cranes. Jib cranes. International standards for design, manufacturing, use and maintenance requirements and recommendations
    CSA B354.1 : 2004 : R2016 PORTABLE ELEVATING WORK PLATFORMS
    CSA B354.2 : 2001 : R2013 SELF-PROPELLED ELEVATING WORK PLATFORMS
    CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 MAST-CLIMBING WORK PLATFORMS
    CSA B354.5:2007 MAST-CLIMBING WORK PLATFORMS
    CSA B354.4 : 2002 : R2007 SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS
    CSA B354.4 : 2002 SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS
    I.S. EN 16228-1:2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
    ISO/TR 19961:2010 Cranes — Safety code on mobile cranes
    ISO 8686-1:2012 Cranes — Design principles for loads and load combinations — Part 1: General
    UNE-EN 1459-2:2016 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
    ISO 16368:2010 Mobile elevating work platforms Design, calculations, safety requirements and test methods
    IEC 61057:2017 Live working - Insulating aerial devices for mounting on a chassis
    UNE-EN 280:2014 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
    DIN EN 280:2016-04 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015)
    DIN EN 14044:2014-04 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
    BS EN 12158-2 : 2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    UNE-EN 16228-1:2015 Drilling and foundation equipment - Safety - Part 1: Common requirements
    BS EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
    BS EN 996 : 1996 PILING EQUIPMENT - SAFETY REQUIREMENTS
    UNE-EN 12158-1:2001 Builders hoists for goods. Part 1: Hoists with accessible platforms.
    BS EN 791 : 1996 DRILL RIGS - SAFETY
    UNE-EN 12158-2:2001 Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices.
    EN 14043:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
    EN 996:1995+A3:2009 Piling equipment - Safety requirements
    EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
    EN 14044:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
    EN 791:1995+A1:2009 Drill rigs - Safety
    EN 12158-2:2000+A1:2010 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
    EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
    EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
    04/30108943 DC : 0
    12/30246324 DC : 0 BS ISO 4305 - MOBILE CRANES - DETERMINATION OF STABILITY
    BS ISO 8686-5 : 2017 CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES
    01/716333 DC : DRAFT DEC 2001 BS ISO 8686-2 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 2: MOBILE CRANES
    ISO 9926-3:2016 Cranes Training of operators Part 3: Tower cranes
    94/714451 DC : DRAFT NOV 1994 PREN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - SAFETY, EXAMINATION AND TESTS
    CAN/CSA-B354.6:17 Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations)
    CSA B354.2 : 2001 : R2011 SELF-PROPELLED ELEVATING WORK PLATFORMS
    CSA B354.2 : 2001 SELF-PROPELLED ELEVATING WORK PLATFORMS
    CSA B354.4:2002 SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS
    ISO 12485:1998 Tower cranes Stability requirements
    EN 16719:2018 Transport platforms
    BS EN 1459-2 : 2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
    ISO 15442:2012 Cranes — Safety requirements for loader cranes
    ISO 14829:2002 Freight containers — Straddle carriers for freight container handling — Calculation of stability
    BS EN 14043:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods
    BS EN 12158-1 : 2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    DIN EN 996:2010-02 PILING EQUIPMENT - SAFETY REQUIREMENTS
    EN 12158-1:2000+A1:2010 Builders' hoists for goods - Part 1: Hoists with accessible platforms

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 8686-1:2012 Cranes — Design principles for loads and load combinations — Part 1: General
    ISO 20332:2016 Cranes Proof of competence of steel structures
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective