BS EN 16445:2013
|
Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet |
ISO/TR 9824:2007
|
Hydrometry Measurement of free surface flow in closed conduits |
17/30326671 DC : 0
|
BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT |
DIN EN ISO 18854:2015-08
|
SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
ISO 8178-1:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
BS EN 16211:2015
|
Ventilation for buildings. Measurement of air flows on site. Methods |
PD ISO/TR 9824:2007
|
Hydrometry. Measurement of free surface flow in closed conduits |
CSA C748 : 2013
|
PERFORMANCE OF DIRECT-EXPANSION (DX) GROUND-SOURCE HEAT PUMPS |
I.S. EN ISO 15012-2:2008
|
HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
I.S. EN ISO 14644-3:2006
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
DIN EN ISO 9906 E : 2013
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
DIN EN 14277 E : 2006
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - METHOD FOR AIRFLOW MEASUREMENT BY CALIBRATED SENSORS IN OR CLOSE TO ATD/PLENUM BOXES |
DIN EN 13141-6:2015-02
|
VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
I.S. EN 13141-6:2014
|
VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
ONORM EN 1366-10 : 2011
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
UNI EN 16445 : 2013
|
VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXED FLOW APPLICATION: NON-ISOTHERMAL PROCEDURE FOR COLD JET |
PD ISO/TR 26762:2008
|
Natural gas. Upstream area. Allocation of gas and condensate |
11/30233217 DC : 0
|
BS EN 1751 - VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
16/30334068 DC : 0
|
BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
PD IEC/TS 62282-7-1:2017
|
Fuel cell technologies Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC) |
05/30098143 DC : DRAFT OCT 2005
|
ISO 2186 - FLUID FLOW IN CLOSED CONDUITS - CONNECTIONS FOR PRESSURE SIGNAL TRANSMISSIONS BETWEEN PRIMARY AND SECONDARY ELEMENTS |
08/30188933 DC : DRAFT SEP 2008
|
BS EN 15854 - VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXING FLOW APPLICATION - NON-ISOTHERMAL PROCEDURE FOR A COLD JET |
14/30289271 DC : 0
|
BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
DIN EN 16445 E : 2013
|
VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXED FLOW APPLICATION: NON-ISOTHERMAL PROCEDURE FOR COLD JET |
14/30230935 DC : 0
|
BS EN ISO 4126-11 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 11: PERFORMANCE TESTING |
BS EN ISO 15012-2:2008
|
Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration Determination of the minimum air volume flow rate of captor hoods and nozzles |
BS ISO 2186:2007
|
Fluid flow in closed conduits. Connections for pressure signal transmissions between primary and secondary elements |
DIN 14811:2008-01
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
PREN 1539 : DRAFT 2012
|
DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
I.S. EN ISO 18854:2015
|
SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
ONORM EN 1822-5 : 2011
|
HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
DIN EN 1751:2014-06
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
DIN EN ISO 5167-1:2004-01
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
I.S. EN 1366-1:2014
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
EN 1366-1:2014
|
Fire resistance tests for service installations - Part 1: Ventilation ducts |
I.S. EN ISO 5167-1:2003
|
MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
I.S. EN 1751:2014
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
DIN EN 1366-1:2014-12
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
I.S. EN ISO 9906:2012
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
DIN EN 1751:1999-01
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPERS AND VALVES |
VDI 2048 Blatt 1:2000-10
|
Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals |
VDI 3861 Blatt 2:2008-01
|
Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method |
UNE-EN 16211:2016
|
Ventilation for buildings - Measurement of air flows on site - Methods |
ISO/TR 15377:2018
|
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 |
16/30326493 DC : 0
|
BS EN ISO 14644-3 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
12/30258755 DC : 0
|
BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
BS ISO 8178-1:2017
|
Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions |
UNI EN 14277 : 2008
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - METHOD FOR AIRFLOW MEASUREMENT BY CALIBRATED SENSORS IN OR CLOSE TO ATD/PLENUM BOXES |
11/30253126 DC : 0
|
BS EN 16282-9 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 9: CAPTURE AND CONTAINMENT PERFORMANCE OF EXTRACTION SYSTEMS - TEST METHODS |
UNE-EN ISO 18854:2015
|
Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
02/706744 DC : DRAFT MAY 2002
|
ISO/DIS 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
I.S. EN 1366-12:2014
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
14/30303765 DC : 0
|
BS EN 16282-9 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 9: CAPTURE AND CONTAINMENT PERFORMANCE OF EXTRACTION SYSTEMS - TEST METHODS |
DIN EN 1366-12:2014-12
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
PREN 1751 : DRAFT 2011
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
ONORM EN 1366-12 : 2014
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
ISO 16345:2014
|
Water-cooling towers — Testing and rating of thermal performance |
API 551 : 2016
|
PROCESS MEASUREMENT |
ISO 29463-3:2011
|
High-efficiency filters and filter media for removing particles in air — Part 3: Testing flat sheet filter media |
DIN EN ISO 14644-3:2006-03
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
UNE-EN 1751:2014
|
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
BS EN ISO 9906:2012
|
Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
DIN EN ISO 9906:2013-03
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
UNI EN 1366-1 : 2014
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
ONORM EN 1366-1 : 2014
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
ISO 8178-1:2020
|
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions |
UNI EN 1751 : 2014
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
UNI EN ISO 9906 : 2012
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
DIN EN ISO 18854 E : 2015
|
SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
PD ISO/TR 9464:2008
|
Guidelines for the use of ISO 5167:2003 |
ISO 29463-2:2011
|
High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics |
DIN EN ISO 15012-2:2008-06
|
HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
DIN EN 16445:2013-05
|
VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXED FLOW APPLICATION: NON-ISOTHERMAL PROCEDURE FOR COLD JET |
ISO 2186:2007
|
Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
ISO 8178-4:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
BS ISO 8178-4:2017
|
Reciprocating internal combustion engines. Exhaust emission measurement Steady-state and transient test cycles for different engine applications |
BS EN 1366-12:2014
|
Fire resistance tests for service installations Non-mechanical fire barrier for ventilation ductwork |
DIN EN 16211:2015-09
|
Ventilation for buildings - Measurement of air flows on site - Methods |
I.S. EN 16211:2015
|
VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
PD ISO/TR 12767:2007
|
Measurement of fluid flow by means of pressure differential devices. Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167 |
ISO/TR 9464:2008
|
Guidelines for the use of ISO 5167:2003 |
IEC TS 62282-7-1:2017
|
Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) |
ISO 9906:2012
|
Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
BS EN 1366-1:2014
|
Fire resistance tests for service installations Ventilation ducts |
BS EN 13959:2004
|
Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D |
BS EN ISO 14644-3:2005
|
Cleanrooms and associated controlled environments Test methods |
UNE-EN 1366-1:2016
|
Fire resistance tests for service installations - Part 1: Ventilation ducts |
ISO 18854:2015
|
Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions |
ISO 5167-1:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
ISO 15012-2:2008
|
Health and safety in welding and allied processes Requirements, testing and marking of equipment for air filtration Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles |
UNE-EN 13141-6:2015
|
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
ONORM EN 13053 : 2011
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
BS EN ISO 5167-1:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full General principles and requirements |
BS EN 14277:2006
|
Ventilation for buildings. Air terminal devices. Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
EN 16211:2015
|
Ventilation for buildings - Measurement of air flows on site - Methods |
EN 14277:2006
|
Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
EN 1751:2014
|
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
EN 1366-12:2014
|
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork |
EN ISO 5167-1:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
EN ISO 9906:2012
|
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
EN 13959:2004
|
Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
EN 16445:2013
|
Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet |
EN ISO 18854:2015
|
Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
EN ISO 15012-2:2008
|
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles (ISO 15012-2:2008) |
EN ISO 14644-3:2005
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
UNI EN ISO 15012-2 : 2008
|
HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
10/30240340 DC : 0
|
BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
BS EN ISO 18854:2015
|
Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions |
BS ISO 16345:2014
|
Water-cooling towers. Testing and rating of thermal performance |
UNI EN 1366-12 : 2014
|
FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
16/30334062 DC : 0
|
BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS |
13/30284324 DC : 0
|
BS EN ISO 18854 - SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
UNE-EN 1366-12:2015
|
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork |
I.S. EN 16445:2013
|
VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXED FLOW APPLICATION: NON-ISOTHERMAL PROCEDURE FOR COLD JET |
ISO/TR 26762:2008
|
Natural gas — Upstream area — Allocation of gas and condensate |
ISO 14644-3:2005
|
Cleanrooms and associated controlled environments Part 3: Test methods |
BS EN 13141-6:2014
|
Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust ventilation system packages used in a single dwelling |
BS EN 1751:2014
|
Ventilation for buildings. Air terminal devices. Aerodynamic testing of damper and valves |
EN 13141-6:2014
|
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
DIN EN 13959:2005-01
|
Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004 |
DIN EN 14277:2006-11
|
Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |