|
BS ISO 13053-2:2011
|
Quantitative methods in process improvement. Six Sigma Tools and techniques |
|
CEI EN 62058-11 : 2011
|
ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
|
16/30325183 DC : 0
|
BS EN 689 - WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
|
BS ISO 7870-2:2013
|
Control charts Shewhart control charts |
|
BS ISO 11843-3:2003
|
Capability of detection Methodology for determination of the critical value for the response variable when no calibration data are used |
|
BS EN ISO 80369-20:2015
|
Small-bore connectors for liquids and gases in healthcare applications Common test methods |
|
12/30247200 DC : 0
|
BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
|
BS ISO 28594:2017
|
Combined accept-zero sampling systems and process control procedures for product acceptance |
|
BS ISO 16269-6:2014
|
Statistical interpretation of data Determination of statistical tolerance intervals |
|
CSA ISO/TR 10017 : 2003 : R2013
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
|
ISO 16269-4:2010
|
Statistical interpretation of data Part 4: Detection and treatment of outliers |
|
I.S. EN 689:1995
|
WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
|
ANSI/AAMI/ISO 80369-20:2015
|
SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS |
|
ISO 28594:2017
|
Combined accept-zero sampling systems and process control procedures for product acceptance |
|
NF ISO 11843-4 : 2004
|
CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
|
ISO 16269-6:2014
|
Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
|
ISO 12828-2:2016
|
Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods |
|
ISO 22514-3:2008
|
Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts |
|
ISO 3951-3:2007
|
Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
|
ISO 3951-5:2006
|
Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
|
ISO 6974-1:2012
|
Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
|
10/30215322 DC : 0
|
BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
|
BS ISO 3951-1:2013
|
Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
|
02/400884 DC : DRAFT OCT 2002
|
CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
|
UNI ISO 22514-2 : 2014
|
STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 2: PROCESS CAPABILITY AND PERFORMANCE OF TIME-DEPENDENT PROCESS MODELS |
|
12/30242633 DC : 0
|
BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
|
BS ISO 8423:2008
|
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
|
DIN ISO 3951:1992-08
|
SAMPLING PROCEDURES AND CHARTS FOR INSPECTION BY VARIABLES FOR PERCENT NONCONFORMING |
|
ANSI S12-3 : 1985 : R1996
|
STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
|
I.S. EN 62058-11:2010
|
ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
|
UNE-EN 62058-11:2011
|
Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
|
BS ISO 11843-6:2013
|
Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
|
ISO 22514-4:2016
|
Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
|
ISO 11843-4:2003
|
Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value |
|
ISO/TR 22514-4:2007
|
Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
|
PREN 689 : DRAFT 2016
|
WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
|
DIN EN ISO 6974-1:2012-11
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
|
IEC 62058-11:2008
|
Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
|
I.S. EN ISO 6974-1:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
|
I.S. EN ISO 10723:2012
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
|
DIN EN ISO 10723:2013-04
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
|
UNI ISO/TR 18532 : 2010
|
Guide to the application of statistical methods for quality and standardization in the industrial sector |
|
BS 6002-1:2007
|
Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
|
KTA 3101.1 : 2016(R2017)
|
AUSLEGUNG DER REAKTORKERNE VON DRUCK- UND SIEDEWASS ERREAKTOREN - TEIL 1: GRUNDSAETZE DER THERMOHYDRAULISCHEN AUSLEGUNG |
|
VDI/VDE 2645 Blatt 2:2014-09
|
Capability test for fastening technology - Machine capability test - MCT |
|
NF EN 62058-11 : 2010
|
ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
|
07/30148930 DC : 0
|
BS ISO 11843-5 - CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
|
11/30244661 DC : 0
|
BS EN 60493-1 - GUIDE FOR THE STATISTICAL ANALYSIS OF AGEING TEST DATA - PART 1: METHODS BASED ON MEAN VALUES OF NORMALLY DISTRIBUTED TEST RESULTS |
|
BS EN 62058-11:2010
|
Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
|
02/400873 DC : DRAFT OCT 2002
|
BS 6002-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
|
BS ISO 22514-2:2017
|
Statistical methods in process management. Capability and performance Process capability and performance of time-dependent process models |
|
05/30132248 DC : DRAFT APR 2005
|
EN 14547 - SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES |
|
02/400883 DC : DRAFT OCT 2002
|
CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED |
|
DIN EN ISO 80369-20 E : 2015
|
SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS (ISO 80369-20:2015) |
|
PD ISO/TR 22514-4:2007
|
Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
|
UNI ISO 11462-2 : 2014
|
GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
|
UNI ISO 11843-6 : 2014
|
CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS |
|
UNE-ISO 16269-6:2015
|
Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals |
|
BS ISO 11843-4:2003
|
Capability of detection Methodology for comparing the minimum detectable value with a given value |
|
05/30135474 DC : DRAFT JUNE 2005
|
BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
|
CEN/TR 14547:2005
|
Sampling schemes for third party conformity assessment of fineness in precious metal articles |
|
ISO 21247:2005
|
Combined accept-zero sampling systems and process control procedures for product acceptance |
|
UNI ISO/TR 8550-3 : 2014
|
GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES |
|
ISO/TR 18532:2009
|
Guidance on the application of statistical methods to quality and to industrial standardization |
|
ISO/TR 8550-1:2007
|
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: Acceptance sampling |
|
UNE-EN ISO 6974-1:2013
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
|
UNI EN ISO 6974-1 : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
|
UNI ISO 13053-2 : 2014
|
QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
|
UNI EN ISO 10723 : 2013
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
|
14/30314227 DC : 0
|
BS ISO 22514-4 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
|
08/19974897 DC : DRAFT JULY 2008
|
BS ISO 16269-4 - STATISTICAL INTERPRETATION OF DATA - PART 4: DETECTION AND TREATMENT OF OUTLIERS |
|
13/30282550 DC : 0
|
BS EN ISO 80369-20 - SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS |
|
UNE-ISO 16269-4:2015
|
Statistical interpretation of data -- Part 4: Detection and treatment of outliers |
|
04/30119227 DC : DRAFT SEP 2004
|
BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
|
DIN 55303-2:1984-05
|
STATISTICAL INTERPRETATION OF DATA; TESTS AND CONFIDENCE INTERVALS RELATING TO EXPECTATIONS AND VARIANCES |
|
BS 6002-4.1:1994
|
Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation |
|
UNI ISO 11843-4 : 2014
|
CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
|
UNI ISO 22514-3 : 2010
|
STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 3: MACHINE PERFORMANCE STUDIES FOR MEASURED DATA ON DISCRETE PARTS |
|
NF ISO 11843-3 : 2003
|
CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED |
|
BS ISO 19003:2006
|
Rubber and rubber products. Guidance on the application of statistics to physical testing |
|
PD ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
|
UNE-ISO 3951-1:2012
|
Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
|
BS 6002-4:2006
|
Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
|
ANSI S12-3 : 1985 : R2011
|
STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
|
17/30325386 DC : 0
|
BS ISO 18250-1- CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS - PART 1: GENERAL REQUIREMENTS AND COMMON TEST METHODS |
|
UNE-ISO 7870-2:2017
|
Control charts -- Part 2: Shewhart control charts |
|
GOST R ISO 16269-6 : 2005
|
STATISTICAL METHODS - STATISTICAL INTERPRETATION OF DATA - DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
|
UNI ISO 7870-2 : 2014
|
CONTROL CHARTS - PART 2: SHEWHART CONTROL CHARTS |
|
ISO 39511:2018
|
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
|
I.S. ENV 1006:2003
|
ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
|
ISO 7870-5:2014
|
Control charts — Part 5: Specialized control charts |
|
S.R. ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
|
UNE-EN ISO 80369-20:2015
|
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015) |
|
ISO 11843-6:2013
|
Capability of detection Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
|
ISO 11462-2:2010
|
Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques |
|
ISO 25337:2010
|
Plastics Production quality control Statistical method for using single measurements |
|
ISO/TR 8550-3:2007
|
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables |
|
UNE-EN ISO 10723:2013
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
|
ISO 13053-2:2011
|
Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
|
ISO 10723:2012
|
Natural gas Performance evaluation for analytical systems |
|
UNE-ISO 13053-2:2012
|
Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
|
ISO 80369-20:2015
|
Small-bore connectors for liquids and gases in healthcare applications Part 20: Common test methods |
|
BS EN ISO 6974-1:2012
|
Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
|
BS EN ISO 10723:2012
|
Natural gas. Performance evaluation for analytical systems |
|
UNE-ISO 3951-2:2012
|
Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
|
EN ISO 10723:2012
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
|
EN ISO 80369-20:2015
|
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015) |
|
EN ISO 6974-1:2012/AC:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012/COR 1:2012) |
|
ANSI S12-3 : 1985
|
STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
|
BS ISO 16269-4:2010
|
Statistical interpretation of data Detection and treatment of outliers |
|
UNI ISO/TR 22514-4 : 2010
|
STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
|
DIN 53804-1:2002-04
|
STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
|
ISO 19003:2006
|
Rubber and rubber products — Guidance on the application of statistics to physical testing |
|
I.S. CEN TR 14547:2006
|
SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES |
|
07/30167025 DC : 0
|
BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
|
ISO 8423:2008
|
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
|
11/30213827 DC : 0
|
BS EN ISO 10723 - NATURAL GAS - PERFORMANCE EVALUATION FOR ON-LINE ANALYTICAL SYSTEMS |
|
UNI ISO 3951-1 : 2014
|
SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
|
DIN EN ISO 80369-20:2015-09
|
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015); German version EN ISO 80369-20:2015 |
|
15/30318694 DC : 0
|
BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD |
|
BS ISO 7870-5:2014
|
Control charts Specialized control charts |
|
12/30058092 DC : 0
|
BS ISO 7870-5 - CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
|
I.S. EN ISO 80369-20:2015&LC:2015
|
SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS (ISO 80369-20:2015) |
|
BS ISO 22514-3:2008
|
Statistical methods in process management. Capability and performance Machine performance studies for measured data on discrete parts |
|
17/30349157 DC : 0
|
BS ISO 8559-3 - SIZE DESIGNATION OF CLOTHES - PART 3: METHODOLOGY OF THE CREATION OF THE BODY MEASUREMENT TABLES AND INTERVALS |
|
CSA ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
|
BS ISO 22514-4:2016
|
Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
|
03/102177 DC : DRAFT OCT 2003
|
BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
|
BS ISO 21247:2005
|
Combined accept-zero sampling systems and process control procedures for product acceptance |
|
ANSI S12-3 : 1985 : R2006
|
STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
|
UNI ISO/TR 8550-1 : 2014
|
GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: ACCEPTANCE SAMPLING |
|
UNI ISO 7870-5 : 2014
|
CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
|
ISO 3951-1:2013
|
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
|
ISO 3951:1989
|
Sampling procedures and charts for inspection by variables for percent nonconforming |
|
ISO 11843-3:2003
|
Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
|
EN 689:2018
|
Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values |
|
ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
|
DIN EN ISO 6974-1 E : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
|
EN 62058-11:2010
|
Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |