I.S. EN ISO 15630-3:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
DIN EN ISO 15156-3:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
BS EN 4700-001:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
17/30352150 DC : 0
|
BS ISO 6787 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - ADJUSTABLE WRENCHES |
07/30172770 DC : 0
|
BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT |
UNE-EN ISO 12670:2016
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
10/30196141 DC : 0
|
BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS |
ISO 5743:2004
|
Pliers and nippers General technical requirements |
BS ISO 9656:2004
|
Pliers and nippers for electronics. Test methods |
02/704957 DC : DRAFT NOV 2002
|
ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
12/30257301 DC : 0
|
BS EN ISO 20957-1 - STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
ISO 11749:2014
|
Belt drive — V-ribbed belts for the automotive industry — Fatigue test |
11/30196123 DC : DRAFT MAY 2011
|
BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
BS ISO 289-1:2015
|
Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity |
ISO 404:2013
|
Steel and steel products — General technical delivery requirements |
14/30261090 DC : 0
|
BS EN ISO 17937 - DENTISTRY - OSTEOTOME FOR BONE COMPACTION AND SINUS FLOOR ELEVATION |
ISO 11949:2016
|
Cold-reduced tinmill products Electrolytic tinplate |
UNE-EN ISO 5182:2017
|
Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
17/30357660 DC : DRAFT AUG 2017
|
BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25% |
API 11D3 :2008
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
06/30148182 DC : DRAFT MAY 2006
|
ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
UNI EN ISO 12690 : 2011
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
13/30290101 DC : 0
|
BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
17/30312468 DC : 0
|
BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
17/30337413 DC : 0
|
BS EN ISO 4957 - TOOL STEELS |
I.S. EN ISO 898-2:2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
BS ISO 9448-10:2013
|
Tools for pressing. Guide bushes Form E, gliding bushes, flanged, type 2 |
BS EN ISO 14998:2013
|
Petroleum and natural gas industries. Downhole equipment. Completion accessories |
API 5DP CHINESE : 2009
|
SPECIFICATION FOR DRILL PIPE |
BS ISO 7689:2008
|
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
17/30303088 DC : 0
|
BS EN ISO 7492 - DENTISTRY - DENTAL EXPLORER |
16/30327501 DC : 0
|
BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT) |
API SPEC 11B CHINESE : 2010
|
SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
07/30144587 DC : 0
|
BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
UNI EN 4700-006 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
BS EN ISO 18556:2016
|
Dentistry. Intraoral spatulas |
13/30247437 DC : 0
|
BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
BS ISO 9448-2:2013
|
Tools for pressing. Guide bushes Form A, gliding bushes, plain, type 1 |
15/30323936 DC : 0
|
BS EN 3833 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
13/30255310 DC : 0
|
BS EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
17/30315891 DC : 0
|
BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
16/30297742 DC : DRAFT JUNE 2016
|
BS EN ISO 19490 - DENTISTRY - SINUS MEMBRANE ELEVATOR |
10/30197302 DC : 0
|
BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
DIN 6773:2001-04
|
HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
04/30074927 DC : DRAFT JUN 2004
|
EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
DIN EN ISO 26443 E : 2016
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008) |
UNE-EN ISO 19490:2018
|
Dentistry - Sinus membrane elevator (ISO 19490:2017) |
13/30264474 DC : 0
|
BS ISO 17541 - PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY |
17/30323197 DC : 0
|
BS EN ISO 20570 - DENTISTRY - ORAL SURGICAL SCALPEL HANDLE |
BS ISO 26443 : 2008
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS |
EN 1627:2011
|
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification |
12/30258463 DC : 0
|
BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
BS EN ISO 12670:2015
|
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
BS ISO 9182-4:2013
|
Tools for pressing. Guide pillars Type C, pillars with taper lead and bush |
BS EN 4700-005:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
ISO 5287:2003
|
Belt drives Narrow V-belts for the automotive industry Fatigue test |
BS EN ISO 9809-2:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
15/30314608 DC : 0
|
BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS |
16/30302541 DC : 0
|
BS EN ISO 19715 - DENTISTRY - FILLING INSTRUMENTS WITH CONTRA SET |
BS ISO 4254-13:2012
|
Agricultural machinery. Safety Large rotary mowers |
15/30297745 DC : 0
|
BS EN ISO 9173-1 - DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS |
12/30258615 DC : 0
|
BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
BS ISO 20957-1:2005
|
Stationary training equipment General safety requirements and test methods |
14/30275471 DC : 0
|
BS ISO 18137-1 - LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS |
17/30361645 DC : DRAFT SEP 2017
|
BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
BS ISO 11119-4:2016
|
Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
BS EN ISO 7866:2012
|
Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing |
ISO 16468:2015
|
Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements |
06/30148179 DC : DRAFT SEP 2006
|
ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
12/30251283 DC : 0
|
BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
BS EN ISO 3266 : 2010
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
06/30159843 DC : 0
|
BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
05/30128668 DC : DRAFT FEB 2005
|
ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
API 11D3 : 2008 : R2015
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
PREN 2576 : 200P2
|
AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
BS ISO 13628-10 : 2005 AMD 16775
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
06/30148176 DC : DRAFT SEP 2006
|
ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
ABMA 10A : 2001 : R2008
|
METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES |
08/30190263 DC : DRAFT SEP 2008
|
BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
PREN 3302 : 200P2
|
AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
I.S. EN ISO 17945:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
BIS IS 1586-3 : 2012
|
METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SCALES, A, B, C, D, E, F, G, H, K, N, T) |
PREN 4359 : 200P1
|
AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS - TECHNICAL SPECIFICATION |
I.S. EN 16281:2013
|
CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
ISO 683-1:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
API SPEC 17J : 2014
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
ISO 9448-9:2013
|
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2 |
ISO 10303-214:2010
|
Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
ISO 12753-2:1999
|
Compasses Part 2: Requirements, designation and marking |
I.S. EN ISO 9809-2:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
ISO 9873:2017
|
Dentistry Intra-oral mirrors |
ISO 11951:2016
|
Cold-reduced tinmill products Blackplate |
I.S. EN ISO 17078-4:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
I.S. EN ISO 18556:2016
|
DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
ONORM EN 3685 : 2008
|
AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
ISO 22034-1:2007
|
Steel wire and wire products — Part 1: General test methods |
UNE-EN ISO 16635-2:2015
|
Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
17/30359541 DC : 0
|
BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
ISO 8642:2008
|
Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods |
BS 2000-49(2007) : 2007
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
UNI EN 14399-9 : 2009
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
I.S. EN 4700-007:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
NF EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS |
NF EN 3389 : 2009
|
AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
NF EN ISO 3266 : 2010 AMD 1 2016
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES |
UNI EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
ISO 5857:2008
|
Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa Procurement specification |
NF EN 3299 : A2007
|
AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
API 14L CHINESE : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
ONORM EN 12504-2 : 2013
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
DIN EN ISO 15156-2:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN ISO 6508-2:2015-06
|
METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
DIN EN 10208-1:2009-07
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
DIN EN ISO 6508-3:2015-06
|
METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015) |
BS EN ISO 14310:2008
|
Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
BS EN ISO 13628-2:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
UNE-EN ISO 898-1:2015
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
BS EN 3302:2017
|
Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 °C. Technical specification |
BS EN 12504-2:2012
|
Testing concrete in structures Non-destructive testing. Determination of rebound number |
UNE-EN 12504-2:2013
|
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
BS EN 10089:2002
|
Hot rolled steels for quenched and tempered springs. Technical delivery conditions |
BS EN ISO 7153-1:2016
|
Surgical instruments. Materials Metals |
BS EN ISO 11960:2014
|
Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
BS EN 10205:2016
|
Cold reduced tinmill products. Blackplate |
UNE-EN 12513:2011
|
Founding - Abrasion resistant cast irons |
BS EN ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
BS EN 14616:2004
|
Thermal spraying. Recommendations for thermal spraying |
BS EN 893:2010
|
Mountaineering equipment. Crampons. Safety requirements and test methods |
BS EN 14566 : 2008
|
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
BS EN 14772:2005
|
Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
I.S. EN 10084:2008
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10218-1:2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 10297-1:2003
|
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
EN 10263-1:2017
|
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
CEN/TS 1071-8 : 2004
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 8: ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION |
EN 12080:2017
|
Railway applications - Axleboxes - Rolling bearings |
EN 892:2012+A1:2016
|
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
EN ISO 6508-2:2015
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
DIN EN 10218-1:2012-03
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 10088-4:2009
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
DIN EN 14616:2005-02
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
DIN ISO 10071-2:2006-03
|
TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY |
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
DIN EN 657:2005-06
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
DIN ISO 12844:2006-11
|
Raw optical glass - Grindability with diamond pellets - Test method and classification (ISO 12844:1999) |
DIN ISO 4498:2005-11
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
DIN EN 10205:2017-03
|
COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
EN 62271-202:2014/AC:2014
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014) |
EN 10205:2016
|
Cold reduced tinmill products - Blackplate |
EN 10218-1:2012
|
Steel wire and wire products - General - Part 1: Test methods |
EN 12513:2011
|
Founding - Abrasion resistant cast irons |
EN ISO 6508-3:2015
|
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
EN ISO 26443:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008) |
EN 10083-2:2006
|
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
ONORM EN ISO 898-2 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
ISO 11950:2016
|
Cold-reduced tinmill products Electrolytic chromium/chromium oxide-coated steel |
UNI EN ISO 16635-2 : 2014
|
DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS |
BS EN ISO 16635-2:2014
|
Dentistry. Dental rubber dam instruments Clamp forceps |
05/30136295 DC : DRAFT JUL 2005
|
ISO 4875-2 - METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS |
UNI CEN/TS 16700 : 2014
|
PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
S.R. CEN/TS 16700:2014
|
PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
BS EN 1627:2011
|
Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification |
12/30245297 DC : 0
|
BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS |
DIN EN ISO 16635-1 E : 2014
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
API SPEC 11D1 : 2015
|
PACKERS AND BRIDGE PLUGS |
ISO 898-3:2018
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes |
BS EN ISO 9809-1:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
DIN EN ISO 18556 E : 2016
|
DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
11/30230618 DC : 0
|
BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
BS EN 4700-006:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
BS ISO 9448-4:2013
|
Tools for pressing. Guide bushes Form C, gliding bushes, headed, type 1 |
I.S. EN ISO 9809-1:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ISO 17918:2015
|
Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
I.S. EN 657:2005
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
DIN EN ISO 22068 E : 2014
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
I.S. EN 10208-2:2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
DIN EN ISO 3266:2016-05
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
UNI EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
13/30274822 DC : 0
|
BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
15/30303331 DC : 0
|
BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
14/30248087 DC : 0
|
BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
15/30278527 DC : 0
|
BS EN ISO 18559 - DENTISTRY - EXTRAORAL SPATULAS FOR MIXING DENTAL CEMENTS |
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS |
BS EN ISO 20957-1:2013
|
Stationary training equipment General safety requirements and test methods |
DIN EN 16451:2015-09
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
13/30260404 DC : 0
|
BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT) |
I.S. EN 15311:2007
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
ONORM EN ISO 15630-3 : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
I.S. EN ISO 14917:2017
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
BS EN ISO 19490:2017
|
Dentistry. Sinus membrane elevator |
11/30238890 DC : 0
|
BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
BS ISO 22068 : 2012
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
DIN EN ISO 9873:2016-03 (Draft)
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
BS ISO 10071-2:2005
|
Tools for pressing. Ball-lock punches Ball-lock punches for heavy duty |
BS EN ISO 19715:2017
|
Dentistry. Filling instrument with contra angle |
BS ISO 4498:2005
|
Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
I.S. EN ISO 9809-3:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
08/30168345 DC : DRAFT JULY 2008
|
BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
ISO 683-14:2004
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
10/30216835 DC : 2010
|
BS ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
15/30248084 DC : 0
|
BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE |
07/30107797 DC : 0
|
BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS |
NF EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
EN 4700-002:2016
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
UNI EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
BS ISO 10071-1:2008
|
Tools for pressing. Ball-lock punches Ball-lock punches for light duty |
BS ISO 16635-1 : 2013
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
BS EN 16602-70-46:2014
|
Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
BS EN ISO 14917:2017
|
Thermal spraying. Terminology, classification |
BS ISO 9182-5:2013
|
Tools for pressing. Guide pillars Type D, end-locking pillars with flange |
PREN 1426 : DRAFT 2013
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
DIN EN ISO 17937:2016-01
|
Dentistry - Osteotome (ISO 17937:2015) |
UNI EN ISO 16635-1 : 2014
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
PREN 10088-2 : DRAFT 2011
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 9154:2016
|
Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
BS ISO 26910-1 : 2009
|
SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES |
API 5CRA : 2010 : INC : ERR 1 : 2011
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
BS ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
12/30246071 DC : 0
|
BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS |
13/30252136 DC : 0
|
BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
BS ISO 404:2013
|
Steel and steel products. General technical delivery requirements |
DIN EN ISO 7866:2013-01
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
15/30312459 DC : 0
|
BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
15/30304304 DC : 0
|
BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
05/30136491 DC : DRAFT JUL 2005
|
EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
API 11D1 REDLINE : 2009
|
PACKERS AND BRIDGE PLUGS |
UNE-EN ISO 18556:2016
|
Dentistry - Intraoral spatulas (ISO 18556:2016) |
05/30132585 DC : DRAFT APR 2005
|
EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
ABMA 10A : 2001 : R2015
|
METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES |
12/30250146 DC : 0
|
BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
PREN 12697-31 : DRAFT 2014
|
BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
ISO 11119-3:2013
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
BS 2000-49(2015) : 2015
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
BS EN ISO 17078-3:2009
|
Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
API SPEC 16F : 2017
|
SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
BS EN ISO 12156-1:2016
|
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
API 11B : 2010
|
SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
UNE-EN 14399-1:2016
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements |
ISO 15787:2016
|
Technical product documentation Heat-treated ferrous parts Presentation and indications |
ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
NF EN 3685 : 2008
|
AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
API SPEC 14L : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
PREN 4111 : 200P2
|
AEROSPACE SERIES - WRENCHES, SPLINED, SOCKETS FOR PIPE FITTINGS - TECHNICAL SPECIFICATION |
EN 12504-2:2012
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
BS EN ISO 11961:2008
|
Petroleum and natural gas industries. Steel drill pipe |
I.S. EN ISO 12679:2015
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
I.S. EN 62271-202:2014
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION |
UNI EN 16281 : 2013
|
CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 14998:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
ISO 4875-2:2006
|
Metal-cutting band saw blades — Part 2: Characteristics and dimensions |
PREN ISO 683-17 : DRAFT 2013
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
I.S. EN ISO 9873:2017
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
EN ISO 11961:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
BS ISO 1711-2:2016
|
Assembly tools for screws and nuts. Technical specifications Machine-operated sockets (impact) |
ISO 18137:2015
|
Leaf springs Technical specifications |
DIN EN ISO 19715:2016-03 (Draft)
|
DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
PREN 12797 : DRAFT 2017
|
BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
UNE-ISO 289-1:2018
|
Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity |
EN 3833:2004
|
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification |
ISO 11119-2:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
ISO 16143-1:2014
|
Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
I.S. EN ISO 16635-2:2014
|
DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
PREN 12080 : DRAFT 2015
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
API 19G1 : 2010
|
SIDE-POCKET MANDRELS |
BS EN 3833:2004
|
Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specification |
NF EN ISO 17078-3 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
NF ISO 7331 : 2011
|
SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
UNE-EN 10088-4:2010
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
UNI EN 4700-007 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
UNI EN ISO 17078-3 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
I.S. EN 4700-006:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
EN 10083-1:2006
|
Steels for quenching and tempering - Part 1: General technical delivery conditions |
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
ISO 289-1:2015
|
Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity |
EN 1426:2015
|
Bitumen and bituminous binders - Determination of needle penetration |
I.S. EN 3299:2007
|
AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
DIN EN ISO 3506-3:2010-04
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN 14772 E : 2005
|
FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS |
DIN EN 12080:2015-06 (Draft)
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
DIN EN 14566:2009-10
|
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
DIN EN ISO 4498:2010-11
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
DIN EN 10297-1:2003-06
|
SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
DIN EN 15049:2007-12
|
Railway applications - Suspension components - Torsion bar, steel |
DIN EN ISO 898-5:2012-09
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
BS EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
BS EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
UNE-EN ISO 6508-3:2015
|
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
ISO 18265:2013
|
Metallic materials Conversion of hardness values |
BS EN 12080:2017
|
Railway applications. Axleboxes. Rolling bearings |
UNE-EN ISO 6508-2:2015
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
BS EN 4359:2006
|
Aerospace series. Six lobe recess. Drivers. Technical Specification |
BS EN 14399-1:2015
|
High-strength structural bolting assemblies for preloading General requirements |
I.S. EN ISO 14920:2015
|
THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:2015) |
I.S. EN ISO 6508-2:2015
|
METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
I.S. EN 3302:2017
|
AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
I.S. EN ISO 13628-2:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN 12513:2011-05
|
Founding - Abrasion resistant cast irons |
I.S. EN ISO 6508-3:2015
|
METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3 - CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015) |
I.S. EN ISO 7153-1:2016
|
SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016) |
I.S. EN 12080:2017
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
I.S. EN 892:2012
|
MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 10208-2:2009-07
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
EN 14772:2005
|
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
I.S. EN ISO 15156-2:2015&LC:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
I.S. EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN ISO 7866:2012/AC:2014
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014) |
I.S. EN 1426:2015
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
I.S. EN 10205:2016
|
COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
DIN EN 10208-1:1998-02
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
DIN EN 10088-2:2014-12
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN ISO 15156-2:2015
|
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
I.S. EN ISO 18265:2013
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
I.S. EN ISO 10432:2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
I.S. EN ISO 898-1:2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN 12697-31:2007-06
|
BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
I.S. EN ISO 14310:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
I.S. EN 10083-2:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
I.S. EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
I.S. EN 12513:2011
|
FOUNDING - ABRASION RESISTANT CAST IRONS |
EN ISO 15156-3:2015
|
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
I.S. EN ISO 9173-1:2016
|
DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
I.S. EN ISO 683-17:2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
DIN EN 12080:2017-11
|
Railway applications - Axleboxes - Rolling bearings |
DIN EN 10083-3:2007-01
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
I.S. EN 14566:2008
|
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 898-5:2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
I.S. EN ISO 16070:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
DIN EN 957-1:1999-02
|
STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 12504-2:2012
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
I.S. EN ISO 4498:2010
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
I.S. EN ISO 3506-3:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
I.S. EN 14399-1:2015
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
UNI EN ISO 14998 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
SBAC TS 220 : 1
|
TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
VDI/VDE 2616 Blatt 1:2012-08
|
Hardness testing of metallic materials |
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
DIN EN ISO 16635-2 E : 2014
|
DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
UNE-EN ISO 12690:2011
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
DIN EN 16630:2015-06
|
PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 3389:2009
|
Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification |
09/30214454 DC : 0
|
BS EN 2576 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C TECHNICAL SPECIFICATION |
DIN EN ISO 26443:2016-09
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008) |
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
06/30143291 DC : DRAFT MAY 2006
|
ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT |
NF EN ISO 9809-3 : 2011
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
API SPEC 19OH : 2018
|
OPENHOLE ISOLATION EQUIPMENT |
08/30160607 DC : DRAFT MAY 2008
|
BS ISO 26910-1 - SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES |
14/30278521 DC : 0
|
BS EN ISO 18556 - DENTISTRY - INTRAORAL SPATULAS |
BS ISO 17541:2014
|
Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility |
BS EN ISO 12690:2010
|
Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities |
DIN EN ISO 16635-1:2014-09
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
BS EN 3388:2009
|
Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650°C. Manufacturing method optional. Technical specification |
BS EN 16281:2013
|
Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods |
BS EN 4700-004:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
BS EN 12697-31:2007
|
Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by gyratory compactor |
ISO 10071-1:2008
|
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty |
I.S. EN 957-1:2005
|
STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
BS ISO 17918:2015
|
Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
15/30285035 DC : 0
|
BS EN ISO 14917 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
BS EN ISO 17078-4:2010
|
Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
BS ISO 9154:2016
|
Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
ISO 7241:2014
|
Hydraulic fluid power — Dimensions and requirements of quick-action couplings |
04/30074924 DC : DRAFT JUNE 2004
|
EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T) |
BS ISO 9182-3:2013
|
Tools for pressing. Guide pillars Type B, end-locking pillars |
I.S. EN 843-4:2005
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
DIN EN 10205:1992-01
|
COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
03/114555 DC : DRAFT SEP 2003
|
EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
BS ISO 5287:2003
|
Belt drives. Narrow V-belts for the automotive industry. Fatigue test |
ISO 9448-10:2013
|
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2 |
API 19G1 CHINESE : 2010
|
SIDE-POCKET MANDRELS |
BS EN 16630:2015
|
Permanently installed outdoor fitness equipment. Safety requirements and test methods |
BS ISO 9448-7:2013
|
Tools for pressing. Guide bushes Form F, ball cage bushes, flanged, type 1 |
05/30128683 DC : DRAFT FEB 2005
|
ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION |
API 16A : 2017
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
17/30370705 DC : 0
|
BS EN 3685 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
BS ISO 11749:2014
|
Belt drive. V-ribbed belts for the automotive industry. Fatigue test |
BS EN 4700-002:2016
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
08/30182454 DC : DRAFT JULY 2008
|
BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
UNI EN 4700-005 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
DIN EN ISO 18556:2016-09
|
DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
DIN EN ISO 12670 E : 2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
PREN 14399-9 : DRAFT 2015
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
UNI ISO 9656 : 2011
|
PLIERS AND NIPPERS FOR ELECTRONICS - TEST METHODS |
14/30295082 DC : 0
|
BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
S.R. CWA 17094-3:2016
|
POLICE FIREARMS TECHNOLOGY - PART 3: POLICE SHOTGUN AMMUNITION FEATURES - RECOMMENDATIONS |
I.S. EN 10083-1:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
14/30301841 DC : 0
|
BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
UNI EN 4700-004 : 2011
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
BS ISO 18869:2017
|
Hydraulic fluid power. Test methods for couplings actuated with or without tools |
15/30269176 DC : 0
|
BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
11/30254171 DC : 0
|
BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 16602-70-46:2014
|
SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
12/30245294 DC : 0
|
BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH |
BS EN ISO 9809-3:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
BS ISO 5857:2008
|
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification |
BS ISO 9182-2:2013
|
Tools for pressing. Guide pillars Type A, straight pillars |
DIN EN ISO 17945 E : 2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
UNI EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
05/30133728 DC : DRAFT MAY 2005
|
EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
API 5DP : 2010(R2015)
|
SPECIFICATION FOR DRILL PIPE |
11/30210148 DC : 0
|
BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
BS ISO 9448-8:2013
|
Tools for pressing. Guide bushes Form G, gliding bushes, stepped, type 1 |
S.R. CWA 17094-1:2016
|
POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS |
DIN EN ISO 9809-3:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
17/30352970 DC : 0
|
BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
11/30230615 DC : 0
|
BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
DIN EN ISO 12679 E : 2015
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
17/30359115 DC : 0
|
BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
I.S. EN ISO 19490:2017
|
DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
DIN EN ISO 14917:2015-09 (Draft)
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
BS ISO 18137:2015
|
Leaf springs. Technical specifications |
BS ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
02/106220 DC : 0
|
BS EN 14566 - MECHANICAL FASTENERS FOR PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
05/30132603 DC : DRAFT APR 2005
|
EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
05/30126202 DC : 0
|
EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
BS ISO 5743:2004
|
Pliers and nippers. General technical requirements |
BS EN ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
BS EN 10083-3 : 2006-08
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
API 19G4 : 2011
|
PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
DIN EN ISO 19490 E : 2017
|
DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
I.S. EN ISO 12670:2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
PREN 71-1 : DRAFT 2014
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
ISO 17541:2014
|
Plastics Quantitative evaluation of scratch-induced damage and scratch visibility |
API SPEC 17K : 2017
|
SPECIFICATION FOR BONDED FLEXIBLE PIPE |
BS EN ISO 12679:2015
|
Thermal spraying. Recommendations for thermal spraying |
UNE-EN ISO 12156-1:2016
|
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
DIN EN 14399-9:2016-01 (Draft)
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
API 11D1 CHINESE : 2009
|
PACKERS AND BRIDGE PLUGS |
DIN EN ISO 19490:2016-07 (Draft)
|
DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
I.S. EN 4700-001:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
I.S. EN ISO 16635-1:2014
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
I.S. EN ISO 20957-1:2013
|
STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-1:2013) |
UNI EN 71-1 : 2015
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
I.S. EN 893:2010
|
MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 3833:2005
|
AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION |
ISO 15461:2018
|
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
UNI EN 4700-003 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
ISO 11119-1:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
ISO 13584-511:2006
|
Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
BS ISO 1711-1:2016
|
Assembly tools for screws and nuts. Technical specifications Hand-operated wrenches and sockets |
I.S. EN ISO 7866:2012
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012) |
UNE-EN ISO 16635-1:2014
|
Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
I.S. EN 12697-31:2007
|
BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
UNE-EN ISO 898-2:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
UNE-EN ISO 14917:2017
|
Thermal spraying - Terminology, classification (ISO 14917:2017) |
14/30310358 DC : 0
|
BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
UNE-EN 10205:2017
|
Cold reduced tinmill products - Blackplate |
ISO 11119-4:2016
|
Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
UNI EN ISO 7866 : 2012
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
NF EN 3388 : 2009
|
AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
ISO 1711-1:2016
|
Assembly tools for screws and nuts Technical specifications Part 1: Hand-operated wrenches and sockets |
ISO 9809-4:2014
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
DIN EN 71-1:2015-02
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
UNI EN ISO 11961 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 16936-1:2005
|
Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop |
ISO 9448-3:2013
|
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1 |
I.S. EN ISO 7492:2018
|
DENTISTRY - DENTAL EXPLORER (ISO 7492:2018) |
ISO 7492:2018
|
Dentistry — Dental explorer |
ISO 26910-1:2009
|
Springs — Shot peening — Part 1: General procedures |
I.S. EN ISO 17078-3:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ISO 9448-4:2013
|
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1 |
ISO 9182-4:2013
|
Tools for pressing Guide pillars Part 4: Type C, pillars with taper lead and bush |
UNE-EN 10088-2:2015
|
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
I.S. EN 3388:2009
|
AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
DIN EN 10083-1:2006-10
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
DIN EN 1426:2015-09
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
DIN EN ISO 683-17:2015-02
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
EN ISO 13628-2:2006/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
UNE-EN 10208-1:2011
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
DIN EN 10089:2003-04
|
Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
DIN EN 14566 E : 2009
|
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
ISO 17078-4:2010
|
Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
BS EN 957-1:2005
|
Stationary training equipment General safety requirements and test methods |
UNE-EN 62271-202:2015
|
High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation |
BS EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
BS EN ISO 642:1999
|
Steel hardenability test by end quenching (Jominy test) |
BS EN ISO 14923:2003
|
Thermal spraying. Characterization and testing of thermally sprayed coatings |
UNE-EN 1426:2015
|
Bitumen and bituminous binders - Determination of needle penetration |
BS EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
ISO 16635-1:2013
|
Dentistry — Dental rubber dam technique — Part 1: Hole punch |
BS EN 14059:2002
|
Decorative oil lamps. Safety requirements and test methods |
BS EN ISO 17078-2:2007
|
Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
BS EN 657:2005
|
Thermal spraying. Terminology, classification |
ISO 26443:2008
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings |
ISO 9173-1:2016
|
Dentistry — Extraction forceps — Part 1: General requirements |
UNE-EN ISO 14920:2015
|
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
UNI EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
ONORM EN ISO 13680 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
UNI EN ISO 13680 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
ONORM EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
EN ISO 13680:2010
|
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
EN ISO 12156-1:2016
|
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
UNI EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
UNI EN 12504-2 : 2012
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
ONORM EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
EN ISO 16635-1:2014
|
Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
EN ISO 17937:2015
|
Dentistry - Osteotome (ISO 17937:2015) |
EN ISO 14923:2003
|
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
UNI EN 10208-2 : 2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
UNI EN ISO 17078-2 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNI EN ISO 4498 : 2010
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
UNI EN ISO 683-17 : 2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
UNI EN ISO 17078-1 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
UNI EN 12513 : 2011
|
Founding - Abrasion resistant cast irons |
UNI EN 10083-1 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN ISO 18265 : 2014
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
UNI EN 893 : 2011
|
MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS |
UNI EN 10083-3 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
EN ISO 10432:2004
|
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
UNI EN 10218-1 : 2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
UNI EN 10208-1 : 2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
UNI EN ISO 13628-2 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
UNI EN ISO 898-1 : 2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN ISO 3506-3 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
UNI EN 14566 : 2009
|
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
UNI EN ISO 14310 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
UNI EN 10084 : 2008
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
EN ISO 13628-10:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
UNI EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN ISO 898-5 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI ISO 9657 : 2011
|
PLIERS AND NIPPERS FOR ELECTRONICS - GENERAL TECHNICAL REQUIREMENTS |
10/30165716 DC : 0
|
BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
07/30161097 DC : 0
|
EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
BS ISO 9448-9:2013
|
Tools for pressing. Guide bushes Form B, ball cage bushes, plain, type 2 |
NF EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS ISO 12670 : 2011 COR 2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
16/30302544 DC : 0
|
BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS |
10/30196823 DC : 0
|
BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
I.S. EN ISO 5182:2016
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
API SPEC 5CRA : 2010
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
09/30196832 DC : 0
|
BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
03/302675 DC : DRAFT FEB 2003
|
EN 14616 - THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
BS EN ISO 22068:2014
|
Sintered-metal injection-moulded materials. Specifications |
13/30276463 DC : 0
|
BS ISO 289-1 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY |
DIN EN 10088-4:2010-01
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
13/30264734 DC : 0
|
BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
BS ISO 6787:2001
|
Assembly tools for screws and nuts. Adjustable wrenches |
API 14A : 2015
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
DIN EN ISO 12679:2015-12
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
BS EN ISO 5182:2009
|
Resistance welding. Materials for electrodes and ancillary equipment |
15/30323937 DC : 0
|
BS EN 3302 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
06/30148173 DC : DRAFT SEP 2006
|
ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
BS ISO 7241:2014
|
Hydraulic fluid power. Dimensions and requirements of quick-action couplings |
DIN EN 16630 E : 2015
|
PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
DIN ISO 7331:2011-10
|
Ski-poles for alpine skiing - Requirements and test methods (ISO 7331:2011) |
10/30196135 DC : 0
|
BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
UNI EN ISO 22068 : 2014
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
13/30252560 DC : 0
|
BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS |
I.S. EN 4700-002:2016
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
ISO 10384:2012
|
Hot-rolled carbon steel sheet as defined by chemical composition |
BS ISO 9448-11:2013
|
Tools for pressing. Guide bushes Form F, ball cage bushes, flanged, type 2 |
UNE-EN ISO 12679:2016
|
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
11/30254168 DC : 0
|
BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
17/30323194 DC : 0
|
BS EN ISO 20569 - DENTISTRY - TREPHINE BURS |
BS EN 4700-003:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
BS EN ISO 15156-3:2015
|
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
DIN EN 16281:2013-04
|
CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
13/30248090 DC : 0
|
BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
14/30294825 DC : 0
|
BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
I.S. EN 3389:2009
|
AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
BS ISO 9448-3:2013
|
Tools for pressing. Guide bushes Form B, ball cage bushes, plain, type 1 |
DIN EN ISO 17937 E : 2016
|
DENTISTRY - OSTEOTOME (ISO 17937:2015) |
BS ISO 9809-4:2014
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
11/30253929 DC : 0
|
BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION |
05/30136401 DC : DRAFT JULY 2005
|
ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS |
11/30230612 DC : 0
|
BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
13/30242622 DC : 0
|
BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
API 14L : 2007 : R2012
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
API 6DSS : 2017-08
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
04/30107683 DC : DRAFT DEC 2004
|
BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
04/30103964 DC : DRAFT MAY 2004
|
BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
BS EN ISO 9873:2017
|
Dentistry. Intra-oral mirrors |
ABMA 10A : 2001
|
METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES |
ISO 9448-5:2013
|
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1 |
API 20A : 2017
|
CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
BS EN 10263-1:2017
|
Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
DIN EN ISO 9809-1:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
NF EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
IS 1367 : Part 3 : 2017
|
TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
BS EN 10088-4:2009
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
ISO 6787:2018
|
Assembly tools for screws and nuts — Adjustable wrenches |
API 17J REDLINE : 2008
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
I.S. EN ISO 17937:2015
|
DENTISTRY - OSTEOTOME (ISO 17937:2015) |
API 14A RUSSIAN : 2001
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 19G3 : 2011
|
RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ISO 10432:2004
|
Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
I.S. EN ISO 26443:2016
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008) |
ISO 9448-8:2013
|
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1 |
BS EN ISO 7492:2018
|
Dentistry. Dental explorer |
NF EN ISO 12690 : 2011
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
UNI EN 15638 : 2009
|
ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
ONORM EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
I.S. EN 15638:2009
|
ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
UNI EN 1627 : 2011
|
PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION |
BS ISO 4960:2007
|
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
I.S. EN ISO 3266:2010
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010) |
UNI EN ISO 898-2 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
ONORM EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 2415:2004
|
Forged shackles for general lifting purposes — Dee shackles and bow shackles |
DIN EN ISO 9873 E : 2000
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
DIN EN ISO 15630-3:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
ISO 16936-2:2005
|
Glass in building — Forced-entry security glazing — Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature |
18/30368675 DC : 0
|
BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
UNI EN 4700-001 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
I.S. EN 3685:2008
|
AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
I.S. EN ISO 12156-1:2016
|
DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
EN 10083-3:2006/AC:2008
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
ISO 9182-5:2013
|
Tools for pressing Guide pillars Part 5: Type D, end-locking pillars with flange |
ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
ISO 6932:2014
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
ISO 15601:2000
|
Hammers — Technical specifications concerning steel hammer heads — Test procedures |
ISO 12156-1:2016
|
Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
ISO 11515:2013
|
Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
I.S. EN ISO 12690:2010
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
ISO 1711-2:2016
|
Assembly tools for screws and nuts Technical specifications Part 2: Machine-operated sockets (impact) |
ISO 9182-2:2013
|
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars |
I.S. EN 4700-005:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
ISO 10071-2:2005
|
Tools for pressing Ball-lock punches Part 2: Ball-lock punches for heavy duty |
I.S. EN 71-1:2014
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
ISO 683-11:2012
|
Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
I.S. EN 10263-1:2017
|
STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
ISO 9657:2004
|
Pliers and nippers for electronics — General technical requirements |
ISO 9448-2:2013
|
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1 |
ONORM EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
DIN EN 893:2011-02
|
MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 1097-2:2016-07 (Draft)
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
UNE-EN 10208-2:2011
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
DIN EN 12504-2 E : 2012
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
DIN EN ISO 14920:2015-04
|
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
DIN EN 15049 E : 2007
|
RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
DIN EN 10084:2008-06
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
BS EN ISO 13680:2010
|
Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
BS EN ISO 10432:2004
|
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
ISO 13680:2010
|
Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
ISO 19715:2017
|
Dentistry — Filling instrument with contra angle |
ISO 12679:2011
|
Thermal spraying Recommendations for thermal spraying |
BS EN ISO 13628-10:2006
|
Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
I.S. EN 1097-2:2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN ISO 15156-2:2015
|
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
BS EN 12513:2011
|
Founding. Abrasion resistant cast irons |
UNE-EN ISO 3506-2:2010
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
ISO 17937:2015
|
Dentistry Osteotome |
BS EN 10084 : 2008-06
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
ISO 15156-3:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
ISO 7331:2011
|
Ski-poles for alpine skiing Requirements and test methods |
ISO 12690:2010
|
Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
ISO 7153-1:2016
|
Surgical instruments Materials Part 1: Metals |
ISO 3266:2010
|
Forged steel eyebolts grade 4 for general lifting purposes |
UNE-EN ISO 7153-1:2017
|
Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
BS EN ISO 4498:2010
|
Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
ISO 16070:2005
|
Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
I.S. EN ISO 3506-2:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
BS EN 10083-2:2006
|
Steels for quenching and tempering Technical delivery conditions for non alloy steels |
BS EN ISO 15136-2:2006
|
Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
ISO 17078-2:2007
|
Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
ONORM EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS EN 10218-1:2012
|
Steel wire and wire products. General Test methods |
ISO 14917:2017
|
Thermal spraying — Terminology, classification |
ISO 16635-2:2014
|
Dentistry Dental rubber dam instruments Part 2: Clamp forceps |
BS EN ISO 16070:2005
|
Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
UNI EN 1097-2 : 2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
UNE-EN 893:2011
|
Mountaineering equipment - Crampons - Safety requirements and test methods |
ISO 15136-2:2006
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
BS EN 892 : 2012
|
MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 10083-1:2006
|
Steels for quenching and tempering General technical delivery conditions |
ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
ISO 9809-2:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
BS EN 15311:2007
|
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
ISO 18556:2016
|
Dentistry Intraoral spatulas |
ISO 14923:2003
|
Thermal spraying Characterization and testing of thermally sprayed coatings |
ISO 4498:2010
|
Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
ISO 20957-1:2013
|
Stationary training equipment Part 1: General safety requirements and test methods |
ISO 14920:2015
|
Thermal spraying — Spraying and fusing of self-fluxing alloys |
BS EN ISO 14920:2015
|
Thermal spraying. Spraying and fusing of self-fluxing alloys |
BS EN ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
ISO 7866:2012
|
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
BS EN ISO 9173-1:2016
|
Dentistry. Extraction forceps General requirements |
ISO 9809-3:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
ISO 14998:2013
|
Petroleum and natural gas industries — Downhole equipment — Completion accessories |
ISO 6508-2:2015
|
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
ISO 14310:2008
|
Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
ISO 9809-1:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ISO 13625:2002
|
Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
ISO 6508-3:2015
|
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
IEC 62271-202:2014
|
High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation |
ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
BS EN ISO 17078-1 : 2004
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
BS EN 15049:2007
|
Railway applications. Suspension components. Torsion bar, steel |
BS EN 3299:2007
|
Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification |
ISO 5182:2016
|
Resistance welding Materials for electrodes and ancillary equipment |
UNE-EN ISO 3506-3:2010
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
UNE-EN 892:2013
|
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
BS EN 1426:2015
|
Bitumen and bituminous binders. Determination of needle penetration |
BS EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
UNE-EN ISO 18265:2014
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
ISO 22068:2012
|
Sintered-metal injection-moulded materials — Specifications |
I.S. EN ISO 3506-1:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ISO 19490:2017
|
Dentistry — Sinus membrane elevator |
ISO 17078-3:2009
|
Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
UNE-EN ISO 683-17:2015
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
ISO 12670:2011
|
Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
UNE-EN ISO 898-5:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
UNE-EN 10218-1:2012
|
Steel wire and wire products - General - Part 1: Test methods |
EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
UNE-EN ISO 7866:2013
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
UNE-EN ISO 9873:2017
|
Dentistry - Intra-oral mirrors (ISO 9873:2017) |
ISO 9182-3:2013
|
Tools for pressing Guide pillars Part 3: Type B, end-locking pillars |
ISO 17078-1:2004
|
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
ISO 642:1999
|
Steel — Hardenability test by end quenching (Jominy test) |
UNE 16513:2012
|
Assembly tools for screws and nuts. Single head engineer's wrenches. Characteristics and tests methods. |
EN ISO 22068:2014
|
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
EN 14399-1:2015
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements |
EN 14059:2002
|
Decorative oil lamps - Safety requirements and test methods |
EN ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
EN ISO 12679:2015
|
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
EN ISO 18556:2016
|
Dentistry - Intraoral spatulas (ISO 18556:2016) |
EN 14616:2004
|
Thermal spraying - Recommendations for thermal spraying |
EN ISO 17078-3:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
EN 16630 : 2015
|
PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 4700-005:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
EN ISO 7153-1:2016
|
Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
EN ISO 20957-1:2013
|
Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013) |
EN 15049:2007
|
Railway applications - Suspension components - Torsion bar, steel |
EN ISO 5182:2016
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
EN 14399-9:2018
|
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies |
EN 16451:2015
|
Railway applications - Braking - Brake pad holder |
EN 16602-70-46:2014
|
Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
EN 4700-003:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
EN ISO 19490:2017
|
Dentistry - Sinus membrane elevator (ISO 19490:2017) |
EN ISO 14920:2015
|
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
EN ISO 18265:2013
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
EN 15638:2009
|
Ice skates - Safety requirements and test methods |
EN 843-4 : 2005
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
EN ISO 4498:2010
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
EN ISO 14310:2008
|
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
EN ISO 9809-1:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
EN 657:2005
|
Thermal spraying - Terminology, classification |
EN ISO 9809-3:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
EN ISO 14917:2017
|
Thermal spraying - Terminology, classification (ISO 14917:2017) |
EN 15311:2007
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
EN 4700-007:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
EN 4359:2006
|
Aerospace series - Six lobe recess - Drivers - Technical specification |
EN ISO 3266:2010/A1:2015
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
EN ISO 16635-2:2014
|
Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
EN ISO 9809-2:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
EN ISO 642:1999
|
Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
EN ISO 19715:2017
|
Dentistry - Filling instrument with contra angle (ISO 19715:2017) |
EN ISO 16070:2005
|
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
EN 14566:2008+A1:2009
|
Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods |
EN 16281:2013
|
Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
EN 3299:2007
|
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification |
EN ISO 14998:2013
|
Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
EN ISO 17078-4:2010
|
Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
EN 3685 : 2008
|
AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
EN ISO 15136-2:2006
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
EN 957-1:2005
|
Stationary training equipment - Part 1: General safety requirements and test methods |
EN 3388 : 2009
|
AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
EN ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
EN 4700-004:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
EN 3302:2017
|
Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification |
EN 4700-001:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
EN ISO 13625:2002
|
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
EN ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
EN 4700-006:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
EN ISO 12670:2015
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
EN 3389 : 2009
|
AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
EN 893:2010
|
Mountaineering equipment - Crampons - Safety requirements and test methods |
BIS IS 3660-7 : 2013
|
METHODS OF TEST FOR NATURAL RUBBER - PART 7: DETERMINATION OF MOONEY VISCOSITY |
DIN EN ISO 19715 E : 2017
|
DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
09/30214463 DC : 0
|
BS EN 2582 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C TECHNICAL SPECIFICATION |
BS EN 16451:2015
|
Railway applications. Braking. Brake pad holder |
04/30105010 DC : DRAFT JUL 2004
|
ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
BS ISO 8642:2008
|
Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods |
DIN EN ISO 22068:2014-06
|
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
I.S. EN 10208-1:2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
BS EN ISO 16635-1:2014
|
Dentistry. Dental rubber dam technique Hole punch |
DIN EN 15638 E : 2009
|
ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
PREN 10263-1 : DRAFT 2014
|
STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
DIN EN 1627:2011-09
|
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification |
BS ISO 9448-5:2013
|
Tools for pressing. Guide bushes Form D, ball cage bushes, headed, type 1 |
DIN EN ISO 12670:2015-12
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
BS ISO 9448-6:2013
|
Tools for pressing. Guide bushes Form E, gliding bushes, flanged, type 1 |
EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
08/30146353 DC : DRAFT MAR 2008
|
BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
BS ISO 16468:2015
|
Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
16/30320762 DC : 0
|
BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN ISO 26443:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Rockwell indentation test for evaluation of adhesion of ceramic coatings |
BS EN 15638:2009
|
Ice skates. Safety requirements and test methods |
16/30327498 DC : 0
|
BS ISO 1711-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 1: HAND-OPERATED WRENCHES AND SOCKETS |
API 16A CHINESE : 2004
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
17/30352980 DC : 0
|
BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS |
17/30361675 DC : 0
|
BS EN 3299 - AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER-PLATED - TECHNICAL SPECIFICATION |
I.S. EN 4700-003:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
PREN 10088-3 : DRAFT 2011
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNE-EN ISO 17937:2016
|
Dentistry - Osteotome (ISO 17937:2015) |
DIN ISO 4498 E : 2005
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
BS EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
13/30280533 DC : 0
|
BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
07/30162947 DC : 0
|
BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
03/306713 DC : DRAFT APR 2003
|
EN 657 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
DIN ISO 12844 E : 2006
|
RAW OPTICAL GLASS - GRINDABILITY WITH DIAMOND PELLETS - TEST METHOD AND CLASSIFICATION |
BS EN 4700-007:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
03/311760 DC : DRAFT JULY 2003
|
ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
12/30246399 DC : 0
|
BS ISO 11749 - BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST |
BS ISO 9657:2004
|
Pliers and nippers for electronics. General technical requirements |
ONORM EN ISO 7866 : 2014
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014) |
DIN EN ISO 17945:2015-08
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
DIN EN 16451 E : 2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
API 5CRA CHINESE : 2011
|
SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
PD CEN/TS 16700:2014
|
Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate |
13/30286138 DC : 0
|
BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN ISO 9809-2:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS ISO 16143-1:2014
|
Stainless steels for general purposes Corrosion-resistant flat products |
UNE-EN 16281:2013
|
Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
06/30151815 DC : 0
|
BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
UNE-EN ISO 22068:2014
|
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
BS ISO 12679 : 2011
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
UNE-EN 71-1:2015
|
Safety of toys - Part 1: Mechanical and physical properties |
10/30165712 DC : 0
|
BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
BS ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Strength and quality of materials |
15/30332554 DC : 0
|
BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
17/30344532 DC : 0
|
BS ISO 6502-3 - RUBBER - MEASUREMENT OF VULCANIZATION CHARACTERISTICS USING CUREMETERS - PART 3: ROTORLESS CUREMETER |
08/30182457 DC : DRAFT JULY 2008
|
BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
BS EN ISO 17937:2015
|
Dentistry. Osteotome |
DD CEN/TS 1071-8:2004
|
Advanced technical ceramics. Methods of test for ceramic coatings Rockwell indentation test for evaluation of adhesion |
ABMA ISO 14190 : 1997
|
AEROSPACE - AIRFRAME ROLLING BEARINGS: BALL AND SPHERICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
BS EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel |
BS ISO 11515 : 2013
|
GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
17/30335249 DC : 0
|
BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES |
BS ISO 5182 : 2008
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
BS ISO 6932:2014
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
BS A 363:2000
|
Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
03/313799 DC : DRAFT AUG 2003
|
ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
API 19G2 : 2010
|
FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNE-EN 16630:2015
|
Permanently installed outdoor fitness equipment - Safety requirements and test methods |
BS EN 71-1 : 2014
|
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
BS EN 3685:2008
|
Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa/650 °C. Technical specification |
05/30132598 DC : DRAFT APR 2005
|
EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
03/314809 DC : DRAFT SEP 2003
|
EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
BS 2A 295:2000
|
Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods |
ISO 9448-11:2013
|
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2 |
UNI EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
API SPEC 16C : 2015
|
CHOKE AND KILL EQUIPMENT |
DIN EN ISO 12690:2011-04
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
DIN EN ISO 15630-3 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
I.S. EN ISO 19715:2017
|
DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
API SPEC 19AC : 2016
|
SPECIFICATION FOR COMPLETION ACCESSORIES |
PREN 4700-002 : 200P3
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
I.S. EN 16451:2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
ISO 8124-1:2018
|
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
I.S. EN 1627:2011
|
PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION |
UNE 16559:2000
|
Pipe cutting tools. Plastic and cooper pipe automatic cutters. Specifications and tests. |
I.S. EN ISO 22068:2014
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
ISO 5718:2013
|
Harvesting equipment — Blades for agricultural rotary mowers — Requirements |
I.S. EN 16630:2015
|
PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 15156-3:2015&LC:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
EN 71-1:2014
|
Safety of toys - Part 1: Mechanical and physical properties |
ISO 18869:2017
|
Hydraulic fluid power — Test methods for couplings actuated with or without tools |
EN ISO 7492:2018
|
Dentistry - Dental explorer (ISO 7492:2018) |
ISO 7689:2008
|
Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification |
I.S. EN 4700-004:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
ISO 7481:2000
|
Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods |
BS EN 14399-9:2009
|
High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies |
ISO 9656:2004
|
Pliers and nippers for electronics — Test methods |
UNI EN 10088-4 : 2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
UNI EN ISO 20957-1 : 2013
|
STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ASTM A 1058 : 2014 : REDLINE
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ISO 4254-13:2012
|
Agricultural machinery — Safety — Part 13: Large rotary mowers |
BS ISO 5718:2013
|
Harvesting equipment. Blades for agricultural rotary mowers. Requirements |
EN 12697-31:2007
|
Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
EN ISO 9873:2017
|
Dentistry - Intra-oral mirrors (ISO 9873:2017) |
I.S. EN 10088-4:2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
I.S. EN 10083-3:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
ISO 4960:2007
|
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
ISO 9448-6:2013
|
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1 |
I.S. EN 14399-9:2009
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
EN ISO 17078-2:2007/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN ISO 13533:2001/AC:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
EN ISO 17078-1:2004/A1:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
DIN EN 14399-1:2015-04
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 9173-1 E : 2017
|
DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
DIN EN 957-1:2005-11
|
STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 10083-1 E : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
CSA B51 : 2014
|
BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
DIN EN ISO 9173-1:2015-02 (Draft)
|
DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
BS EN 10297-1:2003
|
Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
BS EN ISO 6508-2:2015
|
Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters |
EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
BS EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
BS EN 10088-2:2014
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
DIN EN 12504-2:2012-12
|
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
ISO 13628-10:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
BS EN ISO 6508-3:2015
|
Metallic materials. Rockwell hardness test Calibration of reference blocks |
BS EN 843-4:2005
|
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness |
BS EN ISO 13533:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
BS EN ISO 18265:2013
|
Metallic materials. Conversion of hardness values |
BS EN ISO 13625:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
BS EN 62271-202:2014
|
High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
BS EN ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
DIN EN 14772:2005-04
|
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
EN 10084:2008
|
Case hardening steels - Technical delivery conditions |
ONORM ISO 7331 : 2012
|
SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS (ISO 7331:2011) |
DIN EN 15311:2007-06
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
DIN EN ISO 9173-1:2017-03
|
DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
DIN EN ISO 9873:2000-07
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
CEN/TS 16700:2014
|
Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate |
EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
DIN EN 15638:2009-07
|
ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 17078-1:2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
EN 10089:2002
|
Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
EN ISO 12690:2010
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
DIN EN 843-4:2005-08
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
DIN ISO 10071-1:2010-11
|
Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty (ISO 10071-1:2008) |
I.S. EN ISO 13533:2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
DIN EN ISO 898-2:2012-08
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
ONORM EN ISO 683-17 : 2015
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |