I.S. EN ISO 15630-3:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
11/30239491 DC : 0
|
BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
DIN EN ISO 5832-2 E : 2012
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:1999) |
BS ISO 9364:2017
|
Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
BS ISO 15208:2012
|
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality |
10/30207371 DC : 0
|
BS ISO 4998 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF STRUCTURAL QUALITY |
10/30196141 DC : 0
|
BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS |
ISO 11119-1:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
11/30196123 DC : DRAFT MAY 2011
|
BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
ISO 404:2013
|
Steel and steel products — General technical delivery requirements |
I.S. EN ISO 8491:2004
|
METALLIC MATERIALS - TUBE (IN FULL SECTION) - BEND TEST |
BS ISO 20826:2006
|
Automotive LPG components. Containers |
ISO 13521:2015
|
Austenitic manganese steel castings |
06/30148182 DC : DRAFT MAY 2006
|
ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
UNI EN 15512 : 2009
|
STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
BS ISO 6361-2:2014
|
Wrought aluminium and aluminium alloys. Sheets, strips and plates Mechanical properties |
15/30317351 DC : 0
|
BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
12/30258891 DC : 0
|
BS ISO 5002 - HOT-ROLLED AND COLD-REDUCED ELECTROLYTIC ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
API 5L REDLINE : 2007
|
SPECIFICATION FOR LINE PIPE |
08/30176215 DC : DRAFT JAN 2008
|
BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
13/30280536 DC : 0
|
BS ISO 4998 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF STRUCTURAL QUALITY |
10/30207377 DC : 0
|
BS ISO 5000 - CONTINUOUS HOT-DIP ALUMINIUM-SILICON-COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
DIN 4099-2:2003-08
|
WELDING OF REINFORCING STEEL - PART 2: QUALITY ASSURANCE |
I.S. EN 10349:2009
|
STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
UNI EN 13600 : 2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
17/30357663 DC : 0
|
BS ISO 5000 - STEEL SHEET, ALUMINIUM-SILICON ALLOY-COATED BY THE CONTINUOUS HOT-DIP PROCESS, OF COMMERCIAL AND DRAWING QUALITIES |
14/30292017 DC : 0
|
BS ISO 6361-2 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS, STRIPS AND PLATES - PART 2: MECHANICAL PROPERTIES |
ISO 9330-6:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
BS EN ISO 9809-2:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
10/30207383 DC : 0
|
BS ISO 14788 - CONTINUOUS HOT-DIP ZINC-5% ALUMINIUM ALLOY COATED STEEL SHEET |
01/714474 DC : DRAFT NOV 2001
|
BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
09/30196319 DC : 0
|
BS ISO 6361-2 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS, STRIPS AND PLATES - PART 2: MECHANICAL PROPERTIES |
BS EN ISO 7866:2012
|
Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing |
96/707690 DC : DRAFT JUN 1996
|
ISO/DIS 14590 - COLD-REDUCED STEEL SHEET OF HIGH TENSILE STRENGTH AND LOW YIELD POINT WITH IMPROVED FORMABILITY |
06/30143946 DC : 0
|
EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN ISO 5832-3:2016
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY (ISO 5832-3:2016) |
ISO 15590-2:2003
|
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings |
UNI EN 13601 : 2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
API 5L RUSSIAN : 2012
|
SPECIFICATION FOR LINE PIPE |
BS ISO 6305-2:2007
|
Railway components. Technical delivery requirements Non-alloy carbon steel baseplates |
04/30116297 DC : DRAFT JUL 2004
|
ISO 20826 - ROAD VEHICLES - AUTOMOTIVE LPG COMPONENTS - CONTAINERS |
UNI EN 13605 : 2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
PREN 10208-3 : DRAFT 1997
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
ISO 22991:2004
|
Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction |
UNE-EN ISO 5832-2:2012
|
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999) |
ISO 9330-2:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
I.S. EN ISO 9809-2:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
ISO 21172-1:2015
|
Gas cylinders Welded steel pressure drums up to 3 000 litres capacity for the transport of gases Design and construction Part 1: Capacities up to 1 000 litres |
UNE-EN 15512:2010
|
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
DIN EN ISO 15630-2:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
UNI EN ISO 15630-1 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
BS EN 13480-8:2017
|
Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
BS EN 13480-8:2017+A1:2019
|
Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
DIN EN 13605:2013-09
|
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
DIN EN 13599:2014-12
|
COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
DIN EN 13604:2013-09
|
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
BS EN 13600:2013
|
Copper and copper alloys. Seamless copper tubes for electrical purposes |
BS EN 1301-1:2008
|
Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
BS EN 14286:2008
|
Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods |
I.S. EN 14276-1:2006
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
BS EN ISO 8491:2004
|
Metallic materials. Tube (in full section). Bend test |
UNI EN 508-3 : 2008
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
I.S. EN 13601:2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
I.S. EN 13148:2010
|
COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
I.S. EN 14870-1:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
EN 12805:2002
|
Automotive LPG components - Containers |
EN ISO 8491:2004
|
Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998) |
EN 12797:2000/A1:2003
|
BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
DIN ISO 12844:2006-11
|
Raw optical glass - Grindability with diamond pellets - Test method and classification (ISO 12844:1999) |
EN 508-3:2008
|
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
EN 13600:2013
|
Copper and copper alloys - Seamless copper tubes for electrical purposes |
DIN EN ISO 5832-3:2015-06 (Draft)
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY (ISO 5832-3:2016) |
BIS IS/ISO 3183 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
BS EN ISO 9809-1:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
17/30352962 DC : 0
|
BS EN ISO 15630-1 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
UNI EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
BS ISO 14788:2017
|
Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
BS EN 10349:2009
|
Steel castings. Austenitic manganese steel castings |
BS ISO 4999:2014
|
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
BS EN ISO 9809-3:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
07/30162943 DC : 0
|
BS EN ISO 15630-2 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
11/30239494 DC : 0
|
BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
17/30339115 DC : 0
|
ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
UNI EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
NF EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ONORM EN 15512 : 2010
|
STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
ISO 5832-2:2018
|
Implants for surgery — Metallic materials — Part 2: Unalloyed titanium |
17/30337809 DC : DRAFT JAN 2017
|
BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
07/30168410 DC : DRAFT DEC 2007
|
BS EN 508-3 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
ISO 9330-4:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
BS ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
15/30310220 DC : 0
|
BS ISO 5832-3 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY |
04/30117561 DC : DRAFT OCT 2004
|
ISO 4999 - CONTINUOUS HOT-DIP TERNE (LEAD ALLOY) COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
BS ISO 404:2013
|
Steel and steel products. General technical delivery requirements |
DIN EN ISO 7866:2013-01
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
17/30334103 DC : 0
|
BS ISO 9364 - CONTINUOUS HOT-DIP 55% ALUMINIUM/ZINC ALLOY-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
I.S. EN ISO 3183:2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
05/30091555 DC : DRAFT MAY 2005
|
ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
ISO 11119-3:2013
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
07/30145003 DC : DRAFT JAN 2007
|
EN 1386 - ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS |
ONORM EN 13600 : 2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
I.S. EN ISO 9809-3:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
ISO 9364:2017
|
Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
PREN 10149-2 : DRAFT 2011
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
BIS IS/ISO 5832-3 : 1996
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY |
ISO 6361-1:2011
|
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery |
BS EN ISO 3183 : 2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
PREN 12797 : DRAFT 2017
|
BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
ISO 3183:2012
|
Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
ISO 15590-1:2009
|
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
DIN EN ISO 15630-2 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
ISO 11119-2:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
DIN EN ISO 15630-1:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
ISO 559:1991
|
Steel tubes for water and sewage |
ISO 4998:2014
|
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
DIN EN 508-3:2009-07
|
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
BS EN 1758:1998
|
Copper and copper alloys. Strip for lead frames |
BS EN 12797:2000
|
Brazing. Destructive tests of brazed joints |
ISO 5832-3:2016
|
Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
BS EN 13148:2010
|
Copper and copper alloys. Hot-dip tinned strip |
I.S. EN 1386:2007
|
ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS |
I.S. EN 485-1:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 13600:2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
DIN EN 13148:2010-12
|
Copper and copper alloys - Hot-dip tinned strip |
I.S. EN 1301-1:2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
EN 15512:2009
|
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
EN ISO 7866:2012/AC:2014
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014) |
I.S. EN 13599:2014
|
COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
I.S. EN 13605:2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
I.S. EN 14286:2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
I.S. EN 508-3:2008
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
I.S. EN 10149-1:2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
I.S. EN 13604:2013
|
COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
I.S. EN 502:2013
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
I.S. EN 13480-8:2017&LC:2019
|
METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
UNI EN 14870-1 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
UNI EN 502 : 2013
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
UNI EN 14286 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
BS 7252-3(1997) : 1997
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
UNI EN ISO 5832-2 : 2012
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
12/30260023 DC : 0
|
BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
I.S. EN 15512:2009
|
STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
11/30235499 DC : 0
|
BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
BS ISO 21172-1:2015
|
Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction Capacities up to 1 000 litres |
12/30264373 DC : 0
|
BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
11/30234437 DC : 0
|
BS ISO 9364 - CONTINUOUS HOT-DIP 55% ALUMINIUM/ZINC ALLOY-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
15/30312507 DC : 0
|
BS ISO 3575 - CONTINUOUS HOT-DIP ZINC-COATED AND ZINC-IRON ALLOY-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
BS ISO 5832-2 : 1999
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
04/30114377 DC : DRAFT JUN 2004
|
ISO 14788 - CONTINUOUS HOT-DIP ZINC-5 % ALUMINIUM ALLOY COATED STEEL SHEET |
BS ISO 13521:2015
|
Austenitic manganese steel castings |
09/30196132 DC : 0
|
BS ISO 11513 - GAS CYLINDERS - REFILLABLE WELDED STEEL CYLINDERS CONTAINING ABSORBENT MATERIAL FOR SUB-ATMOSPHERIC GAS PACKAGING - DESIGN, CONSTRUCTION AND TESTING |
DIN EN ISO 9809-3:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
02/712761 DC : DRAFT OCT 2002
|
ISO 15509-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS |
17/30352970 DC : 0
|
BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
DIN EN 10349:2010-02
|
Steel castings - Austenitic manganese steel castings |
17/30352966 DC : 0
|
BS EN ISO 15630-2 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC AND LATTICE GIRDER |
BS ISO 18172-1:2007
|
Gas cylinders. Refillable welded stainless steel cylinders Test pressure 6 MPa and below |
CSA ISO 5832-2 : 0
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
ISO 15208:2012
|
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality |
I.S. EN ISO 5832-2:2012
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:2018) |
B339-14
|
Cylinders, spheres, and tubes for the transportation of dangerous goods |
I.S. EN ISO 15630-2:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
ISO 9329-4:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
ISO 14788:2017
|
Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
DIN EN ISO 5832-2:2012-08
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:1999) |
UNE-EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
I.S. EN ISO 7866:2012
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012) |
PREN 13480-8 : DRAFT 2012
|
METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
PREN 15566 : DRAFT 2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
UNI EN ISO 7866 : 2012
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
ISO 9330-1:1990
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties |
ISO 9329-3:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties |
ISO 18172-2:2007
|
Gas cylinders Refillable welded stainless steel cylinders Part 2: Test pressure greater than 6 MPa |
ISO 9809-4:2014
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire |
ISO 6930-1:2001
|
High yield strength steel plates and wide flats for cold forming Part 1: Delivery conditions for thermomechanically-rolled steels |
EN ISO 15630-2:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010) |
ISO 5000:2011
|
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
ISO 9329-1:1989
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
ISO 5002:2013
|
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
ISO 9330-3:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
ISO 3183-3:1999
|
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
ISO 20703:2006
|
Gas cylinders Refillable welded aluminium-alloy cylinders Design, construction and testing |
DIN EN 1386:2008-05
|
Aluminium and aluminium alloys - Tread plate - Specifications |
DIN EN 12797:2000-12
|
Brazing - Destructive tests of brazed joints; English version of DIN EN 12797 |
DIN EN 14276-1:2011-05
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
UNE-EN 508-3:2010
|
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
EN 14276-1:2020
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
UNI EN 14276-1 : 2011
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
ONORM EN 14276-1 : 2011
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 502:2013
|
Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
UNI EN 13599 : 2014
|
COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
UNI EN 1654 : 1999
|
COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
UNI EN 1652 : 1999
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
EN 14870-1:2011
|
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
UNI EN 1301-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 10149-1 : 2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 13148 : 2010
|
COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
UNI EN 13604 : 2013
|
COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
UNE-EN 10349:2011
|
Steel castings - Austenitic manganese steel castings |
DIN EN 10149-1:2013-12
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 10349 : 2009
|
STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
NF EN ISO 9809-3 : 2011
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
NF EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS EN ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Reinforcing bars, wire rod and wire |
10/30207374 DC : 0
|
BS ISO 4999 - CONTINUOUS HOT-DIP TERNE (LEAD ALLOY) COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
PREN 485-2 : DRAFT 99
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
07/30162939 DC : 0
|
BS EN ISO 15630-1 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
BS ISO 18172-2:2007
|
Gas cylinders. Refillable welded stainless steel cylinders Test pressure greater than 6 MPa |
ISO 9330-5:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
09/30196316 DC : 0
|
BS ISO 6361-1 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS, STRIPS AND PLATES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
11/30234411 DC : 0
|
BS ISO 15208 - CONTINUOUS HOT-DIP ZINC-COATED TWIN-ROLL CAST STEEL SHEET OF COMMERCIAL QUALITY |
10/30207743 DC : 0
|
BS ISO 3575 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
99/710776 DC : DRAFT JULY 1999
|
PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
BS ISO 15211:2012
|
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel |
BS ISO 20703:2006
|
Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing |
UNE-EN ISO 5832-3:2017
|
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016) |
17/30334109 DC : 0
|
BS ISO 14788 - STEEL SHEET, ZINC-5% ALUMINIUM ALLOY-COATED BY THE CONTINUOUS HOT-DIP PROCESS, OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
BS ISO 3183-3:1999
|
Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
13/30241415 DC : 0
|
BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
BS ISO 9809-4:2014
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
BS ISO 3575:2011
|
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities |
04/301144 DC : DRAFT JAN 2004
|
ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
BS EN ISO 5832-3:2016
|
Implants for surgery. Metallic materials Wrought titanium 6-aluminium 4-vanadium alloy |
13/30242622 DC : 0
|
BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
BS 7252-10:1994
|
Metallic materials for surgical implants Specification for wrought titanium 5-aluminium 2.5-iron alloy |
13/30280527 DC : 0
|
BS ISO 4999 - CONTINUOUS HOT-DIP TERNE (LEAD ALLOY) COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
UNI EN ISO 15630-2 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
DIN EN ISO 9809-1:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
DIN EN 15512 E : 2010
|
STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
API 5L CHINESE : 2012
|
SPECIFICATION FOR LINE PIPE |
ISO 5832-10:1996
|
Implants for surgery — Metallic materials — Part 10: Wrought titanium 5-aluminium 2,5-iron alloy |
ISO 3575:2016
|
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
UNI EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
ISO 18172-1:2007
|
Gas cylinders Refillable welded stainless steel cylinders Part 1: Test pressure 6 MPa and below |
ISO 4999:2014
|
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
BS ISO 11513:2011
|
Gas cylinders. Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection |
ISO 4706:2008
|
Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below |
DIN EN ISO 15630-3:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
EN ISO 3183:2012/A1:2018
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
EN ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010) |
PREN 502 : DRAFT 2012
|
ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
ONORM EN 13601 : 2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
ASTM A 1058 : 2014 : REDLINE
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
EN ISO 5832-2:2018
|
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018) |
ONORM EN 13605 : 2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
ISO 4739:1985
|
Wrought copper and copper alloy products Selection and preparation of specimens and test pieces for mechanical testing |
ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
ISO 20826:2006
|
Automotive LPG components Containers |
ISO 11513:2011
|
Gas cylinders Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) Design, construction, testing, use and periodic inspection |
ISO 6361-2:2014
|
Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties |
EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
ISO 6362-1:2012
|
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery |
ISO 6930-2:2004
|
High yield strength steel plates and wide flats for cold forming Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels |
ONORM EN ISO 3183 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
ONORM EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
DIN EN 485-1:2016-10
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 10151:2003-02
|
STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
DIN EN 502:2013-06
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
BS EN 13605:2013
|
Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
BS EN 12805:2002
|
Automotive LPG components. Containers |
BS EN 502:2013
|
Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet |
BS EN 485-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNE-EN 13601:2014
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
UNE-EN 13148:2012
|
Copper and copper alloys - Hot-dip tinned strip |
ONORM EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS EN 508-3:2008
|
Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet Stainless steel |
ISO 9809-2:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
ISO 7866:2012
|
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
ISO 9809-3:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
ISO 9809-1:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
BS EN 988:1997
|
Zinc and zinc alloys. Specification for rolled flat products for building |
EN 14276-1:2006+A1:2011
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
UNE-EN 13600:2014
|
Copper and copper alloys - Seamless copper tubes for electrical purposes |
BS EN 14276-1 : 2006
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
BS EN 13599:2014
|
Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
BS EN 13601:2013
|
Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
BS EN 1652:1998
|
Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
UNE-EN 10149-1:2014
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
BS EN 13604:2013
|
Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
UNE-EN 502:2013
|
Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
BS EN 14870-1:2011
|
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
ISO 8491:1998
|
Metallic materials Tube (in full section) Bend test |
UNE-EN ISO 7866:2013
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
BS EN 1654:1998
|
Copper and copper alloys. Strip for springs and connectors |
UNE-EN 485-1:2017
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
BS EN 1386:2007
|
Aluminium and aluminium alloys. Tread plate. Specifications |
BS EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
DIN EN ISO 8491:2004-10
|
Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998) |
EN 13599:2014
|
Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
EN 1758:1997
|
Copper and copper alloys - Strip for lead frames |
EN 13604:2013
|
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
EN 1653:1997/A1:2000
|
COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
EN 988:1996
|
Zinc and zinc alloys - Specifications for rolled flat products for building |
EN ISO 9809-1:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
EN ISO 9809-3:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
EN 1652:1997/AC:2003
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
EN ISO 9809-2:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
EN 1386:2007
|
Aluminium and aluminium alloys - Tread plate - Specifications |
EN 14870-2:2004
|
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
EN 1654:1997/AC:2003
|
COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
EN 14286:2008
|
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
ISO 6305-2:2007
|
Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates |
13/30252124 DC : 0
|
BS ISO 13521 - AUSTENITIC MANGANESE STEEL CASTINGS |
I.S. EN ISO 9809-1:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
17/30341500 DC : 0
|
BS EN ISO 5832-2 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
17/30358601 DC : 0
|
BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
03/116565 DC : DRAFT OCT 2003
|
ISO 20703 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY - DESIGN, CONSTRUCTION AND TESTING |
13/30264471 DC : 0
|
BS ISO 21172-1 - GAS CYLINDERS - WELDED STEEL PRESSURE DRUMS UP TO 3000 LITRES CAPACITY FOR THE TRANSPORT OF GASES - DESIGN AND CONSTRUCTION - PART 1: CAPACITIES UP TO 1000 LITRES |
BIS IS/ISO 5832-2 : 1999
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
07/30162947 DC : 0
|
BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
DIN ISO 12844 E : 2006
|
RAW OPTICAL GLASS - GRINDABILITY WITH DIAMOND PELLETS - TEST METHOD AND CLASSIFICATION |
ONORM EN ISO 7866 : 2014
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014) |
DIN EN 15512:2010-09
|
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
DIN EN ISO 9809-2:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
04/30117557 DC : DRAFT OCT 2004
|
ISO 9364 - CONTINUOUS HOT-DIP ALUMINUM/ZINC-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
EN 13605:2013
|
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
BS ISO 4706:2008
|
Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below |
07/30164617 DC : 0
|
BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
06/30081895 DC : DRAFT MAY 2006
|
ISO 4706 - GAS CYLINDERS - REFILLABLE WELDED STEEL CYLINDERS - PART 1: TEST PRESSURE 60 BAR AND BELOW |
97/703009 DC : 0
|
PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
BS EN 15512:2009
|
Steel static storage systems. Adjustable pallet racking systems. Principles for structural design |
17/30351224 DC : 0
|
BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
EN 13601:2013
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
BS ISO 4998:2014
|
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
UNI EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
DIN EN ISO 3183:2013-03
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
PREN 14276-1 : DRAFT 2017
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
UNI EN ISO 3183 : 2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
ISO 8458-1:2002
|
Steel wire for mechanical springs Part 1: General requirements |
ISO 15211:2012
|
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel |
BS EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel |
17/30359541 DC : 0
|
BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
BS EN ISO 15630-2:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Welded fabric |
DIN EN ISO 15630-1 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
PREN 10149-1 : DRAFT 2011
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
DIN EN ISO 15630-3 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
ISO 3183-2:1996
|
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
ISO 6931-2:2005
|
Stainless steels for springs Part 2: Narrow strip |
ISO 15630-2:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric |
I.S. EN ISO 15630-1:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
ONORM EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
DIN EN 13601:2013-09
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
DIN EN 14286 E : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
DIN EN 13600:2013-09
|
Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
BS EN 14870-2:2004
|
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings |
BS EN 1653:1998
|
Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
BS EN 10151:2002
|
Stainless steel strip for springs. Technical delivery conditions |
EN ISO 5832-3:2016
|
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016) |
EN 13148 : 2010
|
COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
BS 7252-2:1994
|
Metallic materials for surgical implants Specification for unalloyed titanium |
EN 1301-1:2008
|
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
EN 10349:2009
|
Steel castings - Austenitic manganese steel castings |
EN 10151:2002
|
Stainless steel strip for springs - Technical delivery conditions |
DIN EN 14286:2008-11
|
ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
UNE-EN 14276-1:2007
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |