DIN EN ISO 22007-6 E : 2015
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
ISO 10878:2013
|
Non-destructive testing Infrared thermography Vocabulary |
17/30330389 DC : 0
|
BS EN ISO 80000-9 - QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
ISO 80000-7:2008
|
Quantities and units Part 7: Light |
BS ISO 80000-9 : 2009
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
UNI CEI ISO 80000-12 : 2010
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
PREN 764-1 : DRAFT 2013
|
PRESSURE EQUIPMENT - PART 1: VOCABULARY |
DIN EN ISO 80000-11 E : 2013
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
UNE-EN ISO 80000-11:2013
|
Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
DIN EN ISO 80000-12 E : 2013
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
DIN EN ISO 80000-9:2013-08
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
ISO 19634:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols |
I.S. EN 14037-5:2016
|
FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 5: OPEN OR CLOSED HEATED CEILING SURFACES - TEST METHOD FOR THERMAL OUTPUT |
CEI UNI 70099 : 2010
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
I.S. EN ISO 22007-3:2012
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008) |
BIS IS/ISO 80000-10 : 2009
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
UNI CEI ISO 80000-7 : 2009
|
QUANTITIES AND UNITS - PART 7: LIGHT |
DIN EN ISO 12213-3:2010-01
|
Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
BS EN ISO 12213-3:2009
|
Natural gas. Calculation of compression factor Calculation using physical properties |
UNE-EN 764-2:2012
|
Pressure equipment - Part 2: Quantities, symbols and units |
EN 80000-14:2009
|
Quantities and units - Part 14: Telebiometrics related to human physiology |
CEI UNI EN 80000-14 : 2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
NF ISO 80000-10 : 2010
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
DIN EN ISO 80000-10:2016-09 (Draft)
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
BS EN ISO 80000-11:2013
|
Quantities and units Characteristic numbers |
UNI CEI EN 80000-14 : 2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
16/30337558 DC : 0
|
BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT AND RADIATION |
15/30281217 DC : 0
|
BS ISO 18251-1 - NON-DESTRUCTIVE TESTING - INFRARED THERMOGRAPHY - SYSTEM AND EQUIPMENT - PART 1: DESCRIPTION OF CHARACTERISTICS |
CEI UNI ISO 80000-7 : 2009
|
QUANTITIES AND UNITS - PART 7: LIGHT |
16/30321526 DC : 0
|
BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES |
OIML V 2-200 : 2012
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
NF EN 80000-14 : 2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
13/30274227 DC : 0
|
BS EN 764-1 - PRESSURE EQUIPMENT - PART 1: VOCABULARY |
BS ISO 22007-6 : 2014
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
UNI EN 4500-001 : 2014
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
09/30189435 DC : 0
|
BS ISO 10878 - NON-DESTRUCTIVE TESTING - INFRARED THERMOGRAPHY - VOCABULARY |
07/30126405 DC : DRAFT DEC 2007
|
ISO 80000-12 - QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNI CEI ISO 80000-9 : 2010
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
BS EN ISO 80000-10:2013
|
Quantities and units Atomic and nuclear physics |
EN 764-2:2012
|
Pressure equipment - Part 2: Quantities, symbols and units |
I.S. EN ISO 11357-1:2016
|
PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES (ISO 11357-1:2016) |
I.S. EN ISO 12213-2:2009
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
I.S. EN ISO 12213-3:2009
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
I.S. EN 764-2:2012
|
PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
DIN EN 764-2:2012-04
|
Pressure equipment - Part 2: Quantities, symbols and units |
DIN EN ISO 22007-6:2015-05
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
NF ISO 80000-12 : 2009
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNI CEI EN ISO 80000-12 : 2013
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
17/30334065 DC : 0
|
BS EN ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
BS EN ISO 22007-6:2015
|
Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique |
DIN EN ISO 80000-12:2015-11 (Draft)
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
UNI CEI EN ISO 80000-11 : 2013
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
BS EN 4500-001:2012
|
Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
BS ISO 80000-12 : 2009
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNE-ISO/IEC GUIA 99:2012 IN
|
International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
BIS IS/ISO 80000-11 : 2008
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
UNE-EN 14037-5:2017
|
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output |
ISO/IEC Guide 99:2007
|
International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
UNE-EN ISO 22007-6:2015
|
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
BIS IS/ISO 80000-9 : 2009
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
BS EN ISO 80000-9 : 2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
UNI CEI ISO 80000-10 : 2010
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
BS EN ISO 80000-12:2013
|
Quantities and units Solid state physics |
EN ISO 80000-11:2013
|
Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
EN 14037-5:2016
|
Free hanging heating and cooling surfaces for water with a temperature below 120C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output |
EN ISO 12213-3:2009
|
Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
UNI EN ISO 12213-3 : 2010
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
UNI EN ISO 12213-2 : 2010
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
UNI EN 764-2 : 2012
|
PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
BS ISO 19634:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols |
DIN EN ISO 22007-3:2012-04
|
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
UNI CEI ISO 80000-11 : 2009
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
DIN EN ISO 80000-11:2013-08
|
Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
UNE-EN ISO 80000-9:2014
|
Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
16/30348139 DC : 0
|
BS EN ISO 80000-4 - QUANTITIES AND UNITS - PART 4: MECHANICS |
13/30259881 DC : 0
|
BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
BS ISO 18251-1:2017
|
Non-destructive testing. Infrared thermography Characteristics of system and equipment |
06/30126364 DC : 0
|
IEC 80000-14 - QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
12/30218281 DC : 0
|
BS ISO 80003-3 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 3: CHEMISTRY |
BS ISO 10878:2013
|
Non-destructive testing. Infrared thermography. Vocabulary |
ISO 18251-1:2017
|
Non-destructive testing Infrared thermography Part 1: Characteristics of system and equipment |
BS ISO 20765-2 : 2015
|
NATURAL GAS - CALCULATION OF THERMODYNAMIC PROPERTIES - PART 2: SINGLE-PHASE PROPERTIES (GAS, LIQUID, AND DENSE FLUID) FOR EXTENDED RANGES OF APPLICATION |
BS EN 80000-14:2009
|
Quantities and units Telebiometrics related to human physiology |
IEEE/ASTM SI 10-2016
|
American National Standard for Metric Practice |
BS ISO 80000-11 : 2008
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
I.S. EN ISO 80000-12:2013
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
UNI CEI 70099 : 2008
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
BIS IS/ISO 80000-12 : 2009
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNI CEI EN ISO 80000-10 : 2013
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
UNE-EN ISO 80000-12:2014
|
Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
I.S. EN ISO 80000-10:2013
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
I.S. EN ISO 22007-6:2015
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
ISO 11357-1:2016
|
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
ISO 12213-3:2006
|
Natural gas Calculation of compression factor Part 3: Calculation using physical properties |
ISO 12213-2:2006
|
Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
IEC 80000-14:2008
|
Quantities and units - Part 14: Telebiometrics related to human physiology |
ISO 22007-6:2014
|
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique |
ISO 22007-3:2008
|
Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method |
ISO 80000-12:2009
|
Quantities and units Part 12: Solid state physics |
ISO 80000-10:2009
|
Quantities and units Part 10: Atomic and nuclear physics |
UNE-EN ISO 12213-2:2010
|
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
BS EN 764-2:2012
|
Pressure equipment Quantities, symbols and units |
BS EN ISO 11357-1:2016
|
Plastics. Differential scanning calorimetry (DSC) General principles |
UNE-EN ISO 12213-3:2010
|
Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
ISO 80000-11:2008
|
Quantities and units Part 11: Characteristic numbers |
UNE-EN ISO 11357-1:2017
|
Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
EN ISO 80000-10:2013
|
Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
EN ISO 80000-12:2013
|
Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
EN ISO 22007-3:2012
|
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
EN ISO 22007-6:2015
|
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
EN ISO 80000-9:2013
|
Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
EN 4500-001:2012
|
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
EN ISO 12213-2:2009
|
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
EN ISO 11357-1:2016
|
Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
DIN EN ISO 80000-9 E : 2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
UNE-EN 80000-14:2011
|
Quantities and units - Part 14: Telebiometrics related to human physiology |
BS EN ISO 22007-3:2012
|
Plastics. Determination of thermal conductivity and thermal diffusivity Temperature wave analysis method |
16/30343594 DC : 0
|
BS EN ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
UNI EN ISO 22007-3 : 2012
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
BIS IS/ISO 80000-7 : 2008
|
QUANTITIES AND UNITS - PART 7: LIGHT |
15/30283700 DC : 0
|
BS EN ISO 80000-12 - QUANTITIES AND UNITS - PART 12: CONDENSED MATTER PHYSICS |
I.S. EN ISO 80000-11:2013
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
12/30272264 DC : 0
|
BS ISO 20765-2 - NATURAL GAS - CALCULATION OF THERMODYNAMIC PROPERTIES - PART 2: SINGLE-PHASE PROPERTIES (GAS, LIQUID, AND DENSE FLUID) FOR EXTENDED RANGES OF APPLICATION |
08/30182090 DC : DRAFT MAY 2008
|
BS EN ISO 11357-1 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES |
BS ISO 80000-10 : 2009
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
08/30126399 DC : DRAFT MAY 2008
|
BS ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
04/30058025 DC : DRAFT MAR 2004
|
ISO 80000-4 - QUANTITIES AND UNITS - PART 4: MECHANICS |
BS EN 14037-5:2016
|
Free hanging heating and cooling surfaces for water with a temperature below 120°C Open or closed heated ceiling surfaces. Test method for thermal output |
I.S. EN ISO 7345:1996
|
THERMAL PERFORMANCE OF BUILDINGS AND BUILDING COMPONENTS - PHYSICAL QUANTITIES AND DEFINITIONS (ISO 7345:2018) |
12/30240396 DC : 0
|
BS ISO 80003-2 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 2: PHYSICS |
BIS IS/IEC 80000-14 : 2008
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
NF EN ISO 22007-3 : 2012
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
08/30126370 DC : DRAFT APR 2008
|
BS ISO 80000-1 - QUANTITIES AND UNITS - PART 1: GENERAL |
UNI CEI EN ISO 80000-9 : 2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
DIN EN ISO 80000-10 E : 2013
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
PREN 4500-001 : 200P2
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
UNE-EN ISO 80000-10:2013
|
Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
I.S. EN ISO 80000-9:2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
I.S. EN 4500-001:2012
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
EN ISO 7345:2018
|
THERMAL PERFORMANCE OF BUILDINGS AND BUILDING COMPONENTS - PHYSICAL QUANTITIES AND DEFINITIONS (ISO 7345:2018) |
I.S. EN 80000-14:2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
BS ISO 80000-7:2008
|
Quantities and units Light |
ISO 20765-2:2015
|
Natural gas Calculation of thermodynamic properties Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application |
DIN EN ISO 12213-2:2010-01
|
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
BS EN ISO 12213-2:2009
|
Natural gas. Calculation of compression factor Calculation using molar-composition analysis |
DIN EN ISO 80000-10:2013-08
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
DIN SPEC 4002-102:2011-05
|
PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET |