Skip to content
Please enter a keyword to search

  • ISO 8033:2016

    Current The latest, up-to-date edition.

    Rubber and plastics hoses Determination of adhesion between components

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  13-12-2016

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 8033:2016 specifies methods for the determination of the adhesion between lining and reinforcement, between cover and reinforcement, between reinforcement layers, between cover and outer lamination (thin layer of material outside the cover for protection) and between lining and inner lamination (thin layer of material inside the lining to reduce permeation of fluid into the lining). It covers all bore sizes and the following types of hose construction:

    - woven textile fabric;

    - braided textile fabric;

    - knitted textile fabric;

    - circular-woven textile fabric;

    - textile spiral;

    - textile cord;

    - wire braid;

    - wire spiral;

    - hoses containing a supporting helix.

    Adequate adhesion between the various components of a hose is essential if it is to perform satisfactorily in service.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 8033. (12/2016)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems
    BS ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels
    ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
    BS ISO 6805:1994 Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification
    07/30162632 DC : 0 BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES
    BS ISO 3861 : 1995 AMD 9705 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    11/30238916 DC : 0 BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    ONORM EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
    BS ISO 19385:2017+A1:2019 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification
    07/30162629 DC : 0 BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS
    08/30165015 DC : DRAFT FEB 2008 BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION
    09/30194969 DC : 0 BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    BS ISO 28017:2009 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
    ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification
    03/311277 DC : DRAFT JAN 2004 ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS
    07/30150928 DC : 0 BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    15/30317657 DC : 0 BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
    ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification
    BS ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels
    BS EN ISO 18752:2016 Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
    DIN EN 16820 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    05/30129301 DC : DRAFT FEB 2005 ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    DIN EN ISO 3821:2016-10 (Draft) GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    PREN 13483 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    BS EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
    BS ISO 18752 : 2014 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    09/30195768 DC : 0 BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    ISO 3862:2017 Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification
    I.S. EN 15889:2011 FIRE-FIGHTING HOSES - TEST METHODS
    ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service Specification
    BS ISO 23297:2017 Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification
    ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification
    ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels
    ISO 11237-2:2006 Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications
    I.S. EN ISO 3821:2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    UNE-EN 16436-1:2014 Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
    ISO 4079-2:2005 Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications
    UNE-EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
    ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
    I.S. EN ISO 1403:2008 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    DIN EN 1947:2014-09 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    DIN EN 13483:2013-09 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    BS EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen. Specification
    BS EN 1765:2004 Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
    BS EN 559:2003 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
    BS EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam. Specification
    UNE-EN ISO 6224:2012 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    UNE-EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
    BS EN 857:2015 Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
    BS EN ISO 5774:2016 Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
    BS EN ISO 14557 : 2002 FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES
    BS EN 14540:2014 Fire-fighting hoses. Non-percolating layflat hoses for fixed systems
    I.S. EN 854:2015 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    DIN EN 1361:1997-08 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    I.S. EN ISO 14557:2003 FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES
    DIN EN 15889:2011-09 Fire-fighting hoses - Test methods
    DIN EN 853:2016-09 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    BS EN ISO 5359 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
    ISO 1436-1:2001 Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications
    ONORM EN ISO 1403 : 2010 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    03/311096 DC : DRAFT DEC 2003 ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS
    12/30256960 DC : 0 BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    PD ISO/TR 17784:2003 Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel
    BS ISO 3862:2009 Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification
    BS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems
    05/30129278 DC : DRAFT FEB 2005 ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
    BS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
    16/30335320 DC : 0 BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
    NF EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    EN ISO 14557:2002/A1:2007 FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES
    14/30266729 DC : 0 BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION
    BS ISO 2398 : 1995 AMD 9704 RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
    16/30335329 DC : 0 BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels
    DIN EN ISO 1403:2010-04 RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    03/311275 DC : DRAFT DEC 2003 ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS
    15/30293925 DC : 0 BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION
    DIN 14811:2008-01 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    BS 8451:2004 Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
    BS ISO 4079:2017 Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification
    DIN EN 15807:2011-05 Railway applications - Pneumatic half couplings
    ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines Specification
    ISO 8028:2017 Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification
    ISO 4079:2017 Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification
    BS ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels
    I.S. EN 16820:2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    I.S. EN 16436-1:2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)
    ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification
    DIN EN 1762:2016-09 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
    EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
    ISO 1403:2005 Rubber hoses, textile-reinforced, for general-purpose water applications Specification
    BIS IS 9573 : 2012 RUBBER HOSE FOR LIQUEFIED PETROLEUM GAS (LPG) - SPECIFICATION
    EN 16436-1:2014+A1:2015 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    18/30363978 DC : 0 BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
    ISO 4079-1:2001 Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications
    ISO 1823-2:1997 Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification
    I.S. EN 856:2015 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    DIN EN 13482:2013-12 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    DIN EN 14540:2014-09 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS
    UNE-EN 1765:2017 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
    ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam — Specification
    BS EN ISO 3861:2008 Rubber hoses for sand and grit blasting. Specification
    UNE-EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
    I.S. EN ISO 6224:2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011)
    I.S. EN 14540:2014 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS
    EN 15807:2011 Railway applications - Pneumatic half couplings
    I.S. EN 13483:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    DIN EN 14420-1:2013-09 Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing
    I.S. EN ISO 3861:2008 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    DIN EN 1361:2004-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    I.S. EN ISO 1401:2016 RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016)
    I.S. EN 1947:2014 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
    I.S. EN ISO 5774:2016 PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016)
    I.S. EN ISO 2398:2016 RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016)
    EN ISO 3861:2008 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
    I.S. EN 12115:2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    DIN EN ISO 2398:2010-04 RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016)
    DIN EN ISO 3821:2010-07 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    I.S. EN ISO 14113:2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    I.S. EN ISO 6134:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
    I.S. EN 694:2014 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    I.S. EN 1360:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    DIN EN ISO 14557:2008-01 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002 + AMD 1:2007); German version EN ISO 14557:2002 + A1:2007
    DIN EN 1947:2002-11 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    I.S. EN ISO 5771:2008 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    I.S. EN 13482:2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    I.S. EN 1765:2016 RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
    I.S. EN 853:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
    I.S. EN 857:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    I.S. EN 14420-1:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING
    ONORM EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    BS 4749:1991 Specification for textile reinforced rubber hydraulic hoses and hose assemblies
    BS 4586:1992 Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies
    BS 3832:1991 Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations
    UNI EN ISO 3861 : 2009 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    UNE-EN ISO 28017:2012 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011)
    BS EN 15807:2011 Railway applications. Pneumatic half couplings
    ONORM EN ISO 3861 : 2010 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    BS EN ISO 8029:2014 Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
    DIN EN 16820:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    UNI EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
    11/30244915 DC : 0 BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
    DIN EN 1360:2013-09 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    15/30317651 DC : 0 BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
    15/30301522 DC : 0 BS ISO 13775-2 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 2: PETROLEUM-BASED-FUEL APPLICATIONS
    03/311322 DC : DRAFT JAN 2004 ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS
    14/30293931 DC : 0 BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS
    UNE-EN 15889:2013 Fire-fighting hoses - Test methods
    03/310327 DC : DRAFT SEP 2003 BS 5120 - RUBBER HOSES FOR GAS WELDING, CUTTING AND ALLIED PROCESSES - HIGH KINK RESISTANT WELDING HOSE (TYPE H) - SPECIFICATION
    BS ISO 1436-2:2005 Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications
    16/30326500 DC : DRAFT JAN 2016 BS ISO 19385 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER JETTING OR WATER BLASTING APPLICATIONS
    16/30334966 DC : 0 BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
    BS ISO 17165-1:2007 Hydraulic fluid power. Hose assemblies Dimensions and requirements
    BS ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels
    BS ISO 6224 : 1995 AMD 9706 PLASTIC HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    UNI EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    07/30175122 DC : DRAFT DEC 2007 BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    14/30293928 DC : 0 BS ISO 13775-1 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 1: NON-FUEL APPLICATIONS
    09/30193685 DC : 0 BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
    UNE-EN ISO 4641:2017 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)
    05/30128222 DC : DRAFT JAN 2005 ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
    BS EN 15889:2011 Fire-fighting hoses. Test methods
    DIN EN ISO 8029:2014-12 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
    DIN EN 16436-1 E : 2016 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    BS ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles
    UNE-EN 15807:2011 Railway applications - Pneumatic half couplings
    BS ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
    I.S. EN ISO 28017:2018 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018)
    ISO 4639-1:1987 Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels
    ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel
    UNI EN ISO 8029 : 2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
    ISO 1823-1:1997 Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification
    EN ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)
    ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems Specification
    ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications
    I.S. EN ISO 4641:2016 RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016)
    DIN EN ISO 14113:2014-02 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    DIN EN ISO 3861:2010-04 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
    DIN EN 694:2014-10 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    DIN EN 12115:2011-04 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011
    BS EN 1763-1:2001 Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses
    BS EN 853:2015 Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
    ISO 1401:2016 Rubber hoses for agricultural spraying
    UNE-EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    BS EN 694:2014 Fire-fighting hoses. Semi-rigid hoses for fixed systems
    UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
    DIN EN 856:2016-09 RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    UNI EN ISO 14113 : 2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA)
    UNI EN ISO 5771 : 2009 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
    UNI EN ISO 1403 : 2009 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    UNI EN 13482 : 2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    UNI EN ISO 6224 : 2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    UNI EN 1947 : 2014 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    UNI EN 1360 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    UNI EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    UNI EN 14540 : 2014 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS
    UNI EN 694 : 2014 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    UNI EN 14420-1 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING
    I.S. EN 15807:2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
    DIN EN 16436-1:2016-04 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    BS ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems. Specification
    EN ISO 5359:2014/A1:2017 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014/AMD 1:2017)
    BS EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
    10/30234625 DC : 0 BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING
    10/30212877 DC : DRAFT JUNE 2010 BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION
    I.S. EN 1361:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    ISO 3821:2008 Gas welding equipment Rubber hoses for welding, cutting and allied processes
    07/30175157 DC : DRAFT DEC 2007 BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION
    ISO 19385:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications Specification
    11/30250273 DC : 0 BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    13/30227963 DC : 0 BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION
    UNE-EN ISO 18752:2017 Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014)
    BS ISO 4079-2:2005 Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications
    03/304727 DC : DRAFT OCT 2003 ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION
    UNI ISO 17165-1 : 2012 HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
    BS ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
    08/30183539 DC : DRAFT JUNE 2008 BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
    16/30335326 DC : 0 BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    BS ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service. Specification
    09/30200633 DC : 0 BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION
    BS EN ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge. Specification
    04/30110371 DC : 0 ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION
    ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels
    BS ISO 6605:2017 Hydraulic fluid power. Test methods for hoses and hose assemblies
    BS ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use Non-fuel applications
    UNI EN 15889 : 2011 FIRE-FIGHTING HOSES - TEST METHODS
    03/300797 DC : DRAFT JAN 2003 EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION
    UNE-EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
    I.S. EN ISO 18752:2016 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014)
    I.S. EN ISO 5359:2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
    ISO 17165-1:2007 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
    BS EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
    ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification
    BS ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
    I.S. EN ISO 8029:2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
    PREN 13482 : DRAFT 2012 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    ISO 3862-2:2005 Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications
    ISO 6805:1994 Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification
    ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels
    PREN 1762 : DRAFT 2018 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    ISO 1436:2017 Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification
    I.S. EN 1762:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
    ISO 23297:2017 Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification
    ISO 17324:2014 Rubber hoses for automotive turbochargers — Specification
    I.S. EN ISO 1825:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017)
    DIN EN ISO 5771:2009-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    BS EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air. Specification
    ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge Specification
    ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification
    BS EN 1361:2004 Rubber hoses and hose assemblies for aviation fuel handling. Specification
    ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air Specification
    ISO 3862-1:2001 Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications
    UNE-EN ISO 1401:2017 Rubber hoses for agricultural spraying (ISO 1401:2016)
    BS EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
    UNE-EN ISO 3821:2011 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
    BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
    UNE-EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
    BS EN ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
    UNE-EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
    BS EN 14420-1:2013 Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing
    ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    ISO 14557:2002 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
    UNE-EN 13482:2014 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    ISO 3861:2005 Rubber hoses for sand and grit blasting Specification
    BS EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
    ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification
    UNE-EN 694:2015 Fire-fighting hoses - Semi-rigid hoses for fixed systems
    BS EN 1947:2014 Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    UNE-EN 1947:2015 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    UNE-EN 14540:2015 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
    BS EN ISO 1403:2008 Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
    UNE-EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
    BS EN ISO 1401:2016 Rubber hoses for agricultural spraying
    UNE-EN ISO 2398:2017 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
    EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    EN ISO 18752:2016 Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014)
    EN ISO 3821:2010 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
    EN 14420-1:2013 Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing
    EN 1327:1996 Gas welding equipment - Thermoplastic hoses for welding and allied processes
    EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
    EN 14540:2014 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
    EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
    EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    EN 559 : 2003 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    EN ISO 1403:2008 Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005)
    EN 1361 : 2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
    EN 1947:2014 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    EN 1765:2016 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
    EN 15889:2011 Fire-fighting hoses - Test methods
    EN ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008)
    EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
    EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
    EN ISO 1401:2016 Rubber hoses for agricultural spraying (ISO 1401:2016)
    EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
    EN 694:2014 Fire-fighting hoses - Semi-rigid hoses for fixed systems
    EN 1763-1 : 2000 RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES
    EN 739:1998/A1:2002 LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
    EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
    EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
    EN ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)
    15/30315105 DC : 0 BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER
    PREN 14420-1 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING
    15/30317639 DC : 0 BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
    BS ISO 17324:2014 Rubber hoses for automotive turbochargers. Specification
    12/30261644 DC : 0 BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE
    ONORM EN 12115 : OCT 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    DIN EN ISO 4641:2016-07 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016)
    PREN 1360 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    13/30275849 DC : 0 BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    15/30317642 DC : 0 BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION
    ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification
    DIN EN ISO 28017:2015-12 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015)
    11/30250270 DC : 0 BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    UNE-EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
    15/30317636 DC : 0 BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING
    DIN EN 15889 E : 2011 FIRE-FIGHTING HOSES - TEST METHODS
    15/30317648 DC : 0 BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION
    15/30317663 DC : 0 BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION
    ISO 11237:2017 Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
    BS ISO 13363:2004 Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification
    BS ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications
    08/30178592 DC : DRAFT FEB 2008 BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
    16/30312462 DC : 0 BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES
    ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification
    BS ISO 11237-1:2005 Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications
    BS ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification
    BS ISO 11237-2:2006 Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications
    BS ISO 1403 : 1995 AMD 9703 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS
    BS ISO 1436:2017 Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification
    ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applications
    BS EN ISO 3821:2010 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
    CSA Z5359 : 2016 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
    I.S. EN ISO 8028:2018 RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017)
    ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification
    ISO 11237-1:2004 Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications
    BS EN 16436-1 : 2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    UNE-EN 16820:2018 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    DIN EN ISO 5359:2015-02 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
    ISO 1436-2:2005 Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications
    UNE-EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    ISO 18752:2014 Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification
    BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
    BS EN 854:2015 Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
    ISO 5774:2016 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
    BS EN ISO 14113:2013 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    ISO 8029:2014 Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification
    BS EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery. Specification
    UNI EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    DIN EN 857:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    DIN EN 1762:2004-07 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    DIN EN 854:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    DIN EN ISO 6224:2012-02 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
    AS/NZS 1335:2020 Gas welding equipment - Rubber hoses for welding, cutting and allied processes
    ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
    ISO 5893:2002 Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification
    ISO 6133:2015 Rubber and plastics Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective