Skip to content
Please enter a keyword to search

  • ISO 8178-5:2015

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  30-06-2021

    Language(s):  French, English

    Published date:  16-11-2015

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 8178-5:2015 specifies fuels whose use is recommended for performing the exhaust emission test cycles given in ISO 8178-4.

    It is applicable to reciprocating internal combustion engines for mobile, transportable and stationary installations excluding engines for vehicles primarily designed for road use. This part of ISO 8178 may be applied to engines used, e.g. earth-moving machines and generating sets, and for other applications.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 8178-5. (11/2015)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    04/30113177 DC : DRAFT JUNE 2004 ISO 8178-11 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 11: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS FROM ENGINES USED IN NONROAD MOBILE MACHINERY UNDER TRANSIENT TEST CONDITIONS
    DIN EN ISO 18854:2015-08 SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015)
    ISO 8178-10:2002 Reciprocating internal combustion engines Exhaust emission measurement Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
    BS ISO 8178-10:2002 Reciprocating internal combustion engines. Exhaust emission measurement Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    ISO 16183:2002 Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
    BS EN 1679-1 : 1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
    BIS IS/ISO 8178-4 : 2007(R2017) RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS
    BS ISO 15550:2002 Internal combustion engines. Determination and method for the measurement of engine power. General requirements
    BS ISO 3046-1:2002 Reciprocating internal combustion engines. Performance Declarations of power, fuel and lubricating oil consumptions, and test methods. Additional requirements for engines for general use
    BS ISO/TR 14396 : 2002 RECIPROCATING INTERNAL COMBUSTION ENGINES - DETERMINATION AND METHOD FOR THE MEASUREMENT OF ENGINE POWER - ADDITIONAL REQUIREMENTS FOR EXHAUST EMISSION TEST IN ACCORDANCE WITH ISO 8178
    BS ISO 8178-11:2006 Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
    BS ISO 8178-2:2008 Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions
    I.S. EN ISO 18854:2015 SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015)
    BS ISO 8178-9:2012 Reciprocating internal combustion engines. Exhaust emission measurement Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    I.S. EN 1679-1:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
    11/30217476 DC : 0 BS ISO 8178-9 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 9: TEST CYCLES AND TEST PROCEDURES FOR TEST BED MEASUREMENT OF EXHAUST GAS SMOKE EMISSIONS FROM COMPRESSION IGNITION ENGINES OPERATING UNDER TRANSIENT CONDITIONS
    BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions
    17/30352956 DC : 0 BS ISO 8178-6 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST
    07/30113186 DC : 0 BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS
    UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
    02/706744 DC : DRAFT MAY 2002 ISO/DIS 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS
    ISO 14396:2002 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission tests in accordance with ISO 8178
    ISO 15550:2016 Internal combustion engines Determination and method for the measurement of engine power General requirements
    ISO 3046-1:2002 Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use
    ISO 8178-9:2012 Reciprocating internal combustion engines Exhaust emission measurement Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    DIN EN 1679-1:2011-09 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
    ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
    UNI EN 1679-1 : 2011 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
    DIN EN ISO 18854 E : 2015 SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015)
    BS ISO 8178-6:2000 Reciprocating internal combustion engines. Exhaust emission measurement Report of measuring results and test
    16/30334068 DC : 0 BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS
    10/30182320 DC : 0 BS EN 1679-1:1998/A1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
    BS ISO 8178-4:2017 Reciprocating internal combustion engines. Exhaust emission measurement Steady-state and transient test cycles for different engine applications
    ISO 8178-4:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications
    NF ISO 8178-6 : 2010 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST
    BS EN ISO 8178-2:1997 Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site
    BS EN ISO 8178-6 : 2001 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TESTS
    ISO 18854:2015 Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions
    BS EN ISO 8178-1:1996 Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement of gaseous and particulate exhaust emissions
    EN ISO 8178-6 : 2000 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST
    EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
    EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
    BS EN ISO 18854:2015 Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
    SAE J 335 : 2012 MULTIPOSITION SMALL ENGINE EXHAUST SYSTEM FIRE IGNITION SUPPRESSION
    16/30334062 DC : 0 BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS
    13/30284324 DC : 0 BS EN ISO 18854 - SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS
    ISO 8178-1:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions
    ISO 8178-11:2006 Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
    ISO 8178-2:2008 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
    BS EN ISO 8178-4:1996 Reciprocating internal combustion engines. Exhaust emission measurement Test cycles for different engine applications
    UNE-EN 1679-1:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES. SAFETY. PART 1: COMPRESSION IGNITION ENGINES.

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3016:1994 Petroleum products Determination of pour point
    ISO 2719:2016 Determination of flash point — Pensky-Martens closed cup method
    ISO 3993:1984 Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method
    EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
    ISO 5164:2014 Petroleum products Determination of knock characteristics of motor fuels Research method
    ISO 8691:1994 Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing
    EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
    EN 1601:2017 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
    EN 12177:1998/AC:2000 LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF BENZENE CONTENT BY GAS CHROMATOGRAPHY
    ISO 10307-1:2009 Petroleum products Total sediment in residual fuel oils Part 1: Determination by hot filtration
    ISO 12937:2000 Petroleum products — Determination of water — Coulometric Karl Fischer titration method
    EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
    IP 364 : 1984 CALCULATED CETANE INDEX OF DIESEL FUELS
    ISO 22854:2016 Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel Multidimensional gas chromatography method
    ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
    ASTM D 189 : 2006 : EDT 1 Standard Test Method for Conradson Carbon Residue of Petroleum Products
    ASTM D 3244 : 2016-06 PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS
    ISO 4264:2007 Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation
    ISO 1998-6:2000 Petroleum industry — Terminology — Part 6: Measurement
    ISO 5165:1998 Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method
    ISO 3837:1993 Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method
    EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
    ISO 8178-1:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions
    ISO 7536:1994 Petroleum products — Determination of oxidation stability of gasoline — Induction period method
    ISO 3007:1999 Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
    EN 24260:1994 Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987)
    ISO 8754:2003 Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry
    ISO 3735:1999 Crude petroleum and fuel oils Determination of sediment Extraction method
    ISO 4260:1987 Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method
    EN 238:1996/A1:2003 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY
    ISO 6251:1996 Liquefied petroleum gases — Corrosiveness to copper — Copper strip test
    ISO 10478:1994 Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods
    ISO 7941:1988 Commercial propane and butane Analysis by gas chromatography
    ISO 2160:1998 Petroleum products Corrosiveness to copper Copper strip test
    ISO 12156-1:2016 Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method
    ISO 8216-1:2017 Petroleum products Fuels (class F) classification Part 1: Categories of marine fuels
    ISO 6615:1993 Petroleum products Determination of carbon residue Conradson method
    ASTM D 86 : 2017-06 TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
    ISO 8217:2017 Petroleum products Fuels (class F) Specifications of marine fuels
    ASTM D 3343 : 2016 : REDLINE Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
    ISO 1998-99:2000 Petroleum industry — Terminology — Part 99: General and index
    EN 589:2008+A1:2012 Automotive fuels - LPG - Requirements and test methods
    ISO 5163:2014 Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method
    ISO 1998-2:1998 Petroleum industry Terminology Part 2: Properties and tests
    ASTM D 4530 : 2015 : REDLINE Standard Test Method for Determination of Carbon Residue (Micro Method)
    ISO 10370:2014 Petroleum products — Determination of carbon residue — Micro method
    ISO 1998-1:1998 Petroleum industry Terminology Part 1: Raw materials and products
    ASTM D 5580 : 2015 : REDLINE Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
    ISO 12205:1995 Petroleum products — Determination of the oxidation stability of middle-distillate fuels
    ISO 1998-7:1998 Petroleum industry Terminology Part 7: Miscellaneous terms
    ISO 3733:1999 Petroleum products and bituminous materials — Determination of water — Distillation method
    ISO 10307-2:2009 Petroleum products Total sediment in residual fuel oils Part 2: Determination using standard procedures for ageing
    ISO 6245:2001 Petroleum products — Determination of ash
    ISO 6246:2017 Petroleum products — Gum content of fuels — Jet evaporation method
    ISO 6296:2000 Petroleum products Determination of water Potentiometric Karl Fischer titration method
    ISO 4259:2006 Petroleum products Determination and application of precision data in relation to methods of test
    ISO 14597:1997 Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry
    ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
    ISO 3830:1993 Petroleum products Determination of lead content of gasoline Iodine monochloride method
    ISO 8973:1997 Liquefied petroleum gases — Calculation method for density and vapour pressure
    ASTM D 3237 : 2017 : REDLINE Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
    ISO 4256:1996 Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method
    ISO 1998-4:1998 Petroleum industry Terminology Part 4: Refining
    ASTM D 5186 : 2015 : REDLINE TEST METHOD FOR DETERMINATION OF THE AROMATIC CONTENT AND POLYNUCLEAR AROMATIC CONTENT OF DIESEL FUELS AND AVIATION TURBINE FUELS BY SUPERCRITICAL FLUID CHROMATOGRAPHY
    ISO 8178-4:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications
    CFR 40(PTS1000-END) : JUL 2016 PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY AND DEPARTMENT OF JUSTICE COUNCIL ON ENVIRONMENTAL QUALITY
    ISO 3405:2011 Petroleum products Determination of distillation characteristics at atmospheric pressure
    ISO 6326-5:1989 Natural gas Determination of sulfur compounds Part 5: Lingener combustion method
    ISO 13757:1996 Liquefied petroleum gases — Determination of oily residues — High-temperature method
    ISO 14596:2007 Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry
    ISO 8819:1993 Liquefied petroleum gases Detection of hydrogen sulfide Lead acetate method
    ISO 8178-11:2006 Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
    ISO 1998-3:1998 Petroleum industry Terminology Part 3: Exploration and production
    ISO 3105:1994 Glass capillary kinematic viscometers — Specifications and operating instructions
    ASTM D 2622 : 2016 : REDLINE Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ISO 4262:1993 Petroleum products Determination of carbon residue Ramsbottom method
    ASTM D 1838 : 2016 : REDLINE Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
    ASTM D 3341 : 2016 : REDLINE Standard Test Method for Lead in Gasoline—Iodine Monochloride Method
    ASTM D 2274 : 2014 : REDLINE Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
    ASTM D 1945 : 2014 : REDLINE Standard Test Method for Analysis of Natural Gas by Gas Chromatography
    ISO 3015:1992 Petroleum products — Determination of cloud point
    ASTM D 5191 : 2015-10 TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD)
    CFR 40(PT86.86.600-END) : JUL 2015 PROTECTION OF ENVIRONMENT
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective