|
ISO 834-10:2014
|
Fire resistance tests Elements of building construction Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
|
BS ISO 30021:2013
|
Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites |
|
UNE-CEN ISO/TS 27469:2012 EX
|
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers (ISO/TS 27469:2010) |
|
ISO 834-9:2003
|
Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements |
|
12/30258984 DC : 0
|
BS ISO 834-10 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 10: SPECIFIC REQUIREMENTS TO DETERMINE THE CONTRIBUTION OF APPLIED FIRE PROTECTION MATERIALS TO STRUCTURAL ELEMENTS |
|
BS EN 60439-2:2000
|
Low voltage switchgear and controlgear assemblies Particular requirements for busbar trunking systems (busways) |
|
PD ISO/TR 10295-3:2012
|
Fire tests for building elements and components. Fire testing of service installations Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials |
|
09/30194263 DC : 0
|
BS EN 61439-6 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
17/30363845 DC : 0
|
BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
|
BS EN ISO 2919:2014
|
Radiological protection. Sealed radioactive sources. General requirements and classification |
|
ISO 30021:2013
|
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites |
|
ISO 6944-1:2008
|
Fire containment — Elements of building construction — Part 1: Ventilation ducts |
|
BS ISO/TR 12470:1998
|
Fire resistance tests. Guidance on the application and extension of results |
|
97/544177 DC : DRAFT JAN 1998
|
ISO/DIS 14832-2 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 2: REQUIREMENTS FOR HORIZONTAL SEPARATING LOADBEARING ELEMENTS |
|
DD CEN ISO/TS 27469:2011
|
Petroleum, petrochemical and natural gas industries. Method of test for fire dampers |
|
10/30216811 DC : 0
|
BS ISO 2919 - RADIATION PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
97/544178 DC : DRAFT JAN 1998
|
ISO/DIS 14832-3 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 3: REQUIREMENTS FOR BEAMS |
|
BS DD9999(2005) : 2005
|
CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS |
|
06/30151123 DC : DRAFT JUN 2006
|
BS ISO 22899-1 - DETERMINATION OF THE RESISTANCE TO JET FIRES OF PASSIVE FIRE PROTECTION MATERIALS - GENERAL REQUIREMENTS |
|
ISO/TS 24679:2011
|
Fire safety engineering Performance of structures in fire |
|
ISO/TS 19880-1:2016
|
Gaseous hydrogen Fuelling stations Part 1: General requirements |
|
DIN EN 15254-4:2013-10
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
BS EN ISO 19901-3:2014
|
Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure |
|
ISO/TR 13387-6:1999
|
Fire safety engineering Part 6: Structural response and fire spread beyond the enclosure of origin |
|
ISO 16923:2016
|
Natural gas fuelling stations — CNG stations for fuelling vehicles |
|
CEI UNI EN 45545-3 : 2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 21927-1:2008
|
Smoke and heat control systems — Part 1: Specification for smoke barriers |
|
ISO/IEC 18010:2002
|
Information technology Pathways and spaces for customer premises cabling |
|
17/30356734 DC : 0
|
BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
|
NF EN 61439-6 : 2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
ASTM E 2748 : 2012 : REV A : R2017
|
Standard Guide for Fire-Resistance Experiments |
|
BS EN 12101-3:2015
|
Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
|
EN 12101-3:2015
|
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
|
CEN ISO/TS 27469:2011
|
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers (ISO/TS 27469:2010) |
|
EN 60439-2:2000/A1:2005
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
BS 9999:2008
|
Code of practice for fire safety in the design, management and use of buildings |
|
EN 45545-3:2013
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
|
I.S. EN 14470-1:2004
|
FIRE SAFETY STORAGE CABINETS - PART 1: SAFETY STORAGE CABINETS FOR FLAMMABLE LIQUIDS |
|
BS 6203:2003
|
Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications |
|
ISO 21927-2:2006
|
Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators |
|
I.S. EN ISO 14692-2:2017
|
PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 2: QUALIFICATION AND MANUFACTURE (ISO 14692-2:2017) |
|
BS ISO 12472:2003
|
Fire resistance of timber door assemblies. Method of determining the efficacy of intumescent seals |
|
ISO 834-7:2000
|
Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns |
|
ASTM E 2748 : 2012
|
Standard Guide for Fire-Resistance Experiments |
|
17/30352210 DC : 0
|
BS ISO 21925-1 - FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: MECHANICAL DAMPERS |
|
DD ISO/TS 27469 : 2010
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METHOD OF TEST FOR FIRE DAMPERS |
|
14/30300516 DC : 0
|
BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
|
03/104200 DC : DRAFT MAR 2003
|
BS XXXX - DETERMINATION OF THE RESISTANCE TO JET-FIRES OF PASSIVE FIRE PROTECTION MATERIALS |
|
PREN 45545-3 : DRAFT 2010
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
97/544176 DC : DRAFT JAN 1998
|
ISO/DIS 14832-1 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 1: REQUIREMENTS FOR VERTICAL SEPARATING LOAD-BEARING ELEMENTS |
|
17/30335987 DC : 0
|
BS ISO 20902-1 - FIRE TEST PROCEDURES FOR DIVISIONAL ELEMENTS THAT ARE TYPICALLY USED IN OIL, GAS AND PETROCHEMICAL INDUSTRIES - PART 1: GENERAL REQUIREMENTS |
|
07/30147204 DC : 0
|
BS 476-10 - FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS |
|
UNE-EN 61439-6:2013
|
Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) |
|
BS ISO 10840:2008
|
Plastics. Guidance for the use of standard fire tests |
|
ISO 21927-3:2006
|
Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators |
|
UNE-EN 45545-3:2013
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
|
BS ISO 3009:2003
|
Fire resistance tests. Elements of building construction. Glazed elements |
|
BS ISO 10294-2:1999
|
Fire-resistance tests. Fire dampers for air distribution systems Classification, criteria and field of application of test results |
|
FM 4100 : 1988
|
FIRE DOOR ASSEMBLIES |
|
EN IEC 62688:2018
|
Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification |
|
ISO 3009:2003
|
Fire-resistance tests Elements of building construction Glazed elements |
|
NF EN 60439-2 : 2000 AMD 1 2006
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
ISO 834-11:2014
|
Fire resistance tests Elements of building construction Part 11: Specific requirements for the assessment of fire protection to structural steel elements |
|
ISO 21927-8:2017
|
Smoke and heat control systems — Part 8: Smoke control dampers |
|
EN 14236:2007
|
Ultrasonic domestic gas meters |
|
NFPA 301 : 2018
|
SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
|
DIN EN 1359:2007-06
|
GAS METERS - DIAPHRAGM GAS METERS |
|
DIN EN 12101-3:2015-12
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
|
DIN EN 14236:2008-06
|
ULTRASONIC DOMESTIC GAS METERS |
|
UNE-EN 12101-3:2016
|
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
|
DIN EN 1775:2007-10
|
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
|
I.S. EN 12101-3:2015
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
|
I.S. EN 1359:2017
|
GAS METERS - DIAPHRAGM GAS METERS |
|
I.S. EN 1775:2007
|
GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
|
NBR 15708-3 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPE - PART 3: GRATING |
|
PD 7974-3:2011
|
Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin |
|
BS 5588-9:1999
|
Fire precautions in the design, construction and use of buildings Code of practice for ventilation and air conditioning ductwork |
|
12/30250116 DC : 0
|
BS ISO 834-11 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 11: SPECIFIC REQUIREMENTS FOR THE ASSESSMENT OF FIRE PROTECTION TO STRUCTURAL STEEL ELEMENTS |
|
14/30291693 DC : 0
|
BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS |
|
01/540031 DC : DRAFT JAN 2001
|
ISO/DIS 834-8 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDINGS CONSTRUCTION - PART 8: SPECIFIC REQUIREMENTS FOR NON-LOAD BEARING VERTICAL SEPARATING ELEMENTS |
|
10/30216690 DC : 0
|
BS EN 45545-3 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
14/30304116 DC : 0
|
BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS |
|
BS ISO 2919 : 2012
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
17/30359807 DC : DRAFT SEP 2017
|
BS ISO 24679-1 - FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE - PART 1: GENERAL |
|
BS ISO 21927-1:2008
|
Smoke and heat control systems Specification for smoke barriers |
|
BS ISO 10295-1:2007
|
Fire tests for building elements and components. Fire testing of service installations Penetration seals |
|
I.S. EN ISO 19901-3:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE (ISO 19901-3:2014) |
|
BS ISO 834-10:2014
|
Fire resistance tests. Elements of building construction Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
|
BS EN 45545-3:2013
|
Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers |
|
14/30291624 DC : 0
|
BS ISO 21927-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
|
05/30137099 DC : 0
|
ISO 5925-1 - FIRE TESTS - SMOKE CONTROL DOOR AND SHUTTER ASSEMBLIES - PART 1: AMBIENT AND MEDIUM TEMPERATURE LEAKAGE TEST PROCEDURE |
|
UNE-EN ISO 2919:2015
|
Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
|
I.S. EN 14236:2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
PD 7974-3:2003
|
Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin (Sub-system 3) |
|
UNI CEI EN 45545-3 : 2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
UNI EN ISO 2919 : 2015
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
PREN 1359 : DRAFT 2014
|
GAS METERS - DIAPHRAGM GAS METERS |
|
XP ISO/TS 29761 : 2016 XP
|
FIRE SAFETY ENGINEERING - SELECTION OF DESIGN OCCUPANT BEHAVIOURAL SCENARIOS |
|
ISO/TR 10840:1993
|
Plastics Burning behaviour Guidance for development and use of fire tests |
|
ISO/TR 834-2:2009
|
Fire-resistance tests Elements of building construction Part 2: Guidance on measuring uniformity of furnace exposure on test samples |
|
ISO 14692-2:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture |
|
I.S. EN 60439-2:2000
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
DIN EN 14470-1:2004-07
|
Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
|
18/30359998 DC : 0
|
BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
|
CSA ISO 19901-3 : 2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
|
ASHRAE HDBK REFRIGERATION : 2014
|
ASHRAE HANDBOOK - REFRIGERATION |
|
UNI EN 1775 : 2007
|
GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
|
ISO 834-8:2002
|
Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements |
|
12/30255590 DC : 0
|
BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES |
|
UNI CEI CEN/TS 45545-3 : 2009
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
PREN 14236 : DRAFT 2017
|
ULTRASONIC DOMESTIC GAS METERS |
|
ISO/TR 834-3:2012
|
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
|
UNI CEN ISO/TS 27469 : 2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METHOD OF TEST FOR FIRE DAMPERS |
|
BS ISO 21927-7:2017
|
Smoke and heat control systems Smoke ducts sections |
|
UNI ISO 2919 : 2012
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
BS ISO 21927-8:2017
|
Smoke and heat control systems Smoke control dampers |
|
ISO 10295-1:2007
|
Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals |
|
05/30141855 DC : DRAFT NOV 2005
|
ISO 6944-1 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - PART 1: VENTILATION DUCTS |
|
ISO 834-12:2012
|
Fire resistance tests Elements of building construction Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces |
|
BS ISO 834-11:2014
|
Fire resistance tests. Elements of building construction Specific requirements for the assessment of fire protection to structural steel elements |
|
ISO 9051:2001
|
Glass in building — Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building |
|
BS ISO/TR 13387-6:1999
|
Fire safety engineering Structural response and fire spread beyond the enclosure of origin |
|
CSA ISO/IEC 18010 :2004
|
INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
|
BS ISO 21927-2 : 2006
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
|
ISO 14886:2014
|
Ships and marine technology Large yachts Structural fire protection for FRP yachts |
|
I.S. EN ISO 2919:2014
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION (ISO 2919:2012) |
|
ISO/TR 5925-2:2006
|
Fire tests Smoke-control door and shutter assemblies Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy |
|
I.S. EN 61439-6:2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) (IEC 61439-6:2012 (EQV)) |
|
XP CEN/TS 45545-3 : 2009 XP
|
RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 6944-2:2009
|
Fire containment Elements of building construction Part 2: Kitchen extract ducts |
|
BS ISO 10294-1 : 1996
|
FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: TEST METHOD |
|
I.S. EN IEC 62688:2018
|
CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION |
|
ISO 10840:2008
|
Plastics Guidance for the use of standard fire tests |
|
ISO 12472:2003
|
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals |
|
S.R. CEN/TS 45545-3:2009
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 3008:2007
|
Fire-resistance tests Door and shutter assemblies |
|
DD ENV 14236:2002
|
Ultrasonic domestic gas meters |
|
DIN EN 14236 E : 2008
|
ULTRASONIC DOMESTIC GAS METERS |
|
ISO/TR 24679-4:2017
|
Fire safety engineering — Performance of structures in fire — Part 4: Example of a fifteen-storey steel-framed office building |
|
ONORM EN 14236 : 2008
|
ULTRASONIC DOMESTIC GAS METERS |
|
NF EN 14236 : 2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
ASTM E 2748 : 2012 : REV A
|
Standard Guide for Fire-Resistance Experiments |
|
ISO 5925-1:2007
|
Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests |
|
EN ISO 14692-2:2017
|
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) |
|
EN 12480:2018
|
Gas meters - Rotary displacement gas meters |
|
I.S. EN 12480:2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
IEC 61439-6:2012
|
Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) |
|
BS EN 14236:2007
|
Ultrasonic domestic gas meters |
|
IEC 60439-2:2000+AMD1:2005 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) |
|
11/30211394 DC : DRAFT MAR 2011
|
BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
|
ISO 19901-3:2014
|
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
|
ISO/TS 27469:2010
|
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers |
|
ISO 2919:2012
|
Radiological protection — Sealed radioactive sources — General requirements and classification |
|
ASTM E 2924 : 2014
|
Standard Practice for Intumescent Coatings |
|
09/30150663 DC : 0
|
BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
|
16/30242287 DC : 0
|
BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION |
|
EN 1775:2007
|
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
|
EN ISO 16923:2018
|
Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) |
|
EN ISO 2919:2014
|
Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
|
EN 14470-1:2004
|
Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
|
EN ISO 19901-3:2014
|
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014) |
|
EN 1359:2017
|
Gas meters - Diaphragm gas meters |
|
ISO 3008-2:2017
|
Fire-resistance tests — Part 2: Lift landing door assemblies |
|
ISO/TR 12470-1:2017
|
Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 1: Loadbearing elements and vertical and horizontal separating elements |
|
BS ISO 10295-2:2009
|
Fire tests for building elements and components. Fire testing of service installations Linear joint (gap) seals |
|
07/30172821 DC : 0
|
BS ISO 10295-2 - FIRE TESTS FOR BUILDING ELEMENTS AND COMPONENTS - FIRE TESTING OF SERVICE INSTALLATIONS - PART 2: LINEAR JOINT (GAP) SEALS |
|
DD ISO/TS 24679:2011
|
Fire safety engineering. Performance of structures in fire |
|
16/30331280 DC (published 2016-04)
|
BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies |
|
XP ISO/TS 24679 : 2011 XP
|
FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE |
|
97/544179 DC : DRAFT JAN 1998
|
ISO/DIS 14832-4 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 4: REQUIREMENTS FOR COLUMNS |
|
MIL-PRF-81904 Revision C:2011
|
COATING COMPOUND, THERMAL-INSULATION |
|
DIN EN 45545-3:2013-08
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
|
BS ISO 21927-3 : 2006
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
|
DIN EN 15254-4 E : 2013
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
08/30154274 DC : DRAFT MAR 2008
|
BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES |
|
BS EN 61439-6:2012
|
Low-voltage switchgear and controlgear assemblies Busbar trunking systems (busways) |
|
PD ISO/TR 24679-4:2017
|
Fire safety engineering. Performance of structures in fire Example of a fifteen-storey steel-framed office building |
|
08/30167713 DC : DRAFT JUNE 2008
|
BS ISO 6944-2 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - KITCHEN EXTRACT DUCTS |
|
08/30192184 DC : 0
|
ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY |
|
18/30370902 DC
|
BS ISO 3008-1. Fire resistance tests. Door and shutter assemblies Part 1. General requirements |
|
CEI EN 61439-6 : 2013
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
BS ISO 16923 : 2016
|
NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
|
10/30232464 DC : 0
|
BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
BS ISO 14886:2014
|
Ships and marine technology. Large yachts. Structural fire protection for FRP yachts |
|
BS EN ISO 16923:2018
|
Natural gas fuelling stations. CNG stations for fuelling vehicles |
|
DD CEN/TS 45545-3:2009
|
Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers |
|
PD 7974-1:2003
|
Application of fire safety engineering principles to the design of buildings Initiation and development of fire within the enclosure of origin (Sub-system 1) |
|
03/115061 DC : 0
|
ISO 3008 - FIRE RESISTANCE TESTS - TEST METHOD FOR FIRE RESISTANCE OF DOORS AND SHUTTERS |
|
S.R. CEN ISO/TS 27469:2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METHOD OF TEST FOR FIRE DAMPERS (ISO/TS 27469:2010) |
|
CSA ISO/IEC 18010 : 2004 : INC : AMD 1 : 2006 : R2012
|
INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
|
EN 15254-4:2008+A1:2011
|
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions |
|
ISO 834-5:2000
|
Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements |
|
I.S. EN ISO 16923:2018
|
NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016) |
|
I.S. EN 45545-3:2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 834-4:2000
|
Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements |
|
ISO/TR 10295-3:2012
|
Fire tests for building elements and components Fire testing of service installations Part 3: Single component penetration seals Guidance on the construction and use of test configurations and simulated services to characterise sealing materials |
|
ISO 21927-7:2017
|
Smoke and heat control systems — Part 7: Smoke ducts sections |
|
UNI EN 15254-4 : 2011
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
ISO 3008-3:2016
|
Fire resistance tests Part 3: Door and shutter assemblies horizontally oriented |
|
ISO/TR 22898:2006
|
Review of outputs for fire containment tests for buildings in the context of fire safety engineering |
|
UNE-EN 15254-4:2009
|
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions |
|
BS EN 15254-4 : 2008
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
I.S. EN 15254-4:2008
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
ISO 15928-4:2017
|
Houses — Description of performance — Part 4: Fire safety |
|
BS EN 1775:2007
|
Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
|
BS ISO 22734-1:2008
|
Hydrogen generators using water electrolysis process Industrial and commercial applications |
|
BS EN 14470-1:2004
|
Fire safety storage cabinets Safety storage cabinets for flammable liquids |
|
ISO 22734-1:2008
|
Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
|
BS EN 1359:2017
|
Gas meters. Diaphragm gas meters |
|
UNE-ISO 22734-1:2012
|
Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
|
EN 61439-6 : 2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) (IEC 61439-6:2012) |
|
CEN/TS 45545-3:2009
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |