Skip to content
Please enter a keyword to search

  • ISO 9705:1993

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    Fire tests Full-scale room test for surface products

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  27-09-2018

    Language(s):  English, French

    Published date:  17-06-1993

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies a test method that simulates a fire that under well ventilated conditions starts in a corner of a small room with a single open doorway. The method is intended to evaluate the contribution to fire growth provided by a surface product using a specified ignition source. It is especially suitable for products that for some reason cannot be tested in a small laboratory scale, e.g. thermoplastic materials, the effect of an insulating substrate, joints, surfaces with great irregularity.

    General Product Information - (Show below) - (Hide below)

    Development Note Also numbered as BS 476-33(1993). (07/2005)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    14/30300270 DC : 0 BS ISO 16733-1 - FIRE SAFETY ENGINEERING - SELECTION OF DESIGN FIRE SCENARIOS AND DESIGN FIRES - PART 1: SELECTION OF DESIGN FIRE SCENARIOS
    BS ISO 24678-6:2016 Fire safety engineering. Requirements governing algebraic formulae Flashover related phenomena
    05/30090262 DC : DRAFT MAY 2005 ISO 5658-2 - REACTION TO FIRE TESTS - PART 2: SPREAD OF FLAME
    ISO 16405:2015 Room corner and open calorimeter Guidance on sampling and measurement of effluent gas production using FTIR technique
    CEI UNI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
    BS ISO/TR 14696:1999 Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)
    05/30136503 DC : 0 PREN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    06/30151267 DC : 0 BS ISO CD 10840 - PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS
    BS ISO 11925-3:1997 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Multi-source test
    PREN 14309 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    16/30336421 DC : 0 BS EN 81-58 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
    MIL-PRF-32489 Base Document:2014 PILLOW, FLAME RESISTANT, SHIPBOARD
    12/30255984 DC : 0 BS ISO 16405 - MEASUREMENT OF TOXIC GAS PRODUCTION USING FTIR TECHNIQUE FOR ROOM CORNER TEST AND OPEN CALORIMETRY
    DD ISO/TS 14934-4:2007 Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests
    ISO 24473:2008 Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
    DIN EN 16069:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
    ISO 10840:2008 Plastics Guidance for the use of standard fire tests
    ISO 16733-1:2015 Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios
    ISO 13785-2:2002 Reaction-to-fire tests for façades — Part 2: Large-scale test
    BS EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
    I.S. EN 13501-1:2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
    UNI EN ISO 25762 : 2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
    ASTM E 1537 : 2016 : REDLINE Standard Test Method for Fire Testing of Upholstered Furniture
    ISO/TR 5660-3:2003 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement
    NFPA 555 : 2017 METHODS FOR EVALUATING POTENTIAL FOR ROOM FLASHOVER
    NFPA 76 : 2016 FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES
    03/318326 DC : DRAFT NOV 2003
    UNE-EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
    EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
    BS 6203:2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
    06/30116005 DC : DRAFT MAY 2006 ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS
    04/19990095 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
    BS ISO TR 9705-2:2001 Reaction to fire tests. Full scale room tests for surface products Technical background and guidance
    DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
    12/30260441 DC : 0 BS ISO 14886 - SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - STRUCTURAL FIRE PROTECTION FOR FRP YACHTS
    07/30147204 DC : 0 BS 476-10 - FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS
    ISO 13784-2:2002 Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
    ISO 13785-1:2002 Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
    BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
    BS ISO 16733-1:2015 Fire safety engineering. Selection of design fire scenarios and design fires Selection of design fire scenarios
    06/30117323 DC : 0 ISO 20632 - ROOM TEST FOR PIPE INSULATION
    ISO/TR 13387-4:1999 Fire safety engineering — Part 4: Initiation and development of fire and generation of fire effluents
    00/121556 DC : DRAFT APR 2000 BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
    BS ISO TR 11925-1:1999 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Guidance on ignitability
    UNE-EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
    DIN EN 14309 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    DIN EN 45545-2:2016-02 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
    UNE-EN 14309:2017 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
    AFAP-1 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS
    DIN EN 14309:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    I.S. EN 45545-2:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
    ISO 5658-2:2006 Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
    UNE-EN 50399:2012 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
    ASTM E 2102 : 2017 : REDLINE Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
    NFPA 301 : 2018 SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS
    PD IEC/TR 62222:2012 Fire performance of communication cables installed in buildings
    BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
    EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
    I.S. EN ISO 15791-1:2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014)
    BS 476-10:2009 Fire tests on building materials and structures Guide to the principles, selection, role and application of fire testing and their outputs
    BS ISO/TR 14697:1997 Fire tests. Guidance on the choice of substrates for building products
    UNI CEI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
    BS ISO TR 5658-1:1997 Reaction to fire tests. Spread of flame Guidance on flame spread
    ASTM E 2280 : 2017 : REDLINE Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
    ISO/TS 16733:2006 Fire safety engineering Selection of design fire scenarios and design fires
    BS ISO/TR 11696-2:1999 Uses of reaction to fire test results Fire hazard assessment of construction products
    03/115041 DC : DRAFT SEP 2003 ISO/DIS 17431 - FIRE TEST - REDUCED-SCALE MODEL BOX TEST
    BS ISO/TR 11696-1:1999 Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products
    I.S. EN 50399:2011 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
    BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests
    I.S. EN 14309:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    I.S. EN 60695-8-2:2017 FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
    BS 7904:1998 Guide to smoke measurement units. Their basis and use in smoke opacity test methods
    BS ISO 16405:2015 Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique
    ISO/TR 11925-1:1999 Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
    BS ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
    ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
    ISO 20632:2008 Reaction-to-fire tests — Small room test for pipe insulation products or systems
    BS EN 14309:2015 Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
    BS ISO 5658-2 : 2006 REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION
    BS EN 50399:2011 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
    ISO/TS 14934-4:2007 Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
    UNI EN 13501-1 : 2009 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
    FM 4880 : 2017 EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS
    ASTM E 1623 : 2016 : REDLINE Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
    ASTM E 1822 : 2017 : REDLINE Standard Test Method for Fire Testing of Stacked Chairs
    PREN 81-58 : DRAFT 2016 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
    ASTM F 1870 : 2016 : REDLINE Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
    ISO/TR 10840:1993 Plastics Burning behaviour Guidance for development and use of fire tests
    ISO 14934-4:2014 Fire tests Calibration and use of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
    ISO/TS 5660-3:2012 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
    ISO 12949:2011 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
    BS EN 13501-1 : 2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
    IEC TR 60695-8-2:2008 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
    ASTM E 603 : 2017 : REDLINE Standard Guide for Room Fire Experiments
    EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
    EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
    UNI EN ISO 15791-1 : 2014 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
    ISO/TR 14696:1999 Reaction to fire tests Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
    15/30315084 DC : DRAFT MAY 2015 BS EN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    12/30255590 DC : 0 BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES
    BS EN 16069 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
    BS ISO 25762 : 2009 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
    BS ISO 5658-4:2001 Reaction to fire tests. Spread of flame Intermediate-scale test of vertical spread of flame with vertically oriented specimen
    BS ISO/TR 13387-4:1999 Fire safety engineering Initiation and development of fire and generation of fire effluents
    ASTM E 2067 : 2015 : REDLINE Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
    BS DD246(1999) : 1999 RECOMMENDATIONS FOR THE USE OF THE CONE CALORIMETER
    FM 4924 : 2013 PIPE AND DUCT INSULATION
    08/30192184 DC : 0 ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY
    10/30207740 DC : 0 BS ISO 12949 - STANDARD TEST METHOD FOR MEASURING THE HEAT RELEASE RATE OF LOW FLAMMABILITY MATTRESSES AND MATTRESS SET
    ISO/TR 17252:2008 Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering
    ASTM E 2257 : 2017 : REDLINE Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
    ISO/TS 17431:2006 Fire tests— Reduced-scale model box test
    08/30169534 DC : DRAFT APR 2008 BS EN 13163 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    PD ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace
    I.S. EN 16069:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
    03/308231 DC : 0 EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS
    DIN EN 13501-1:2010-01 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
    PD ISO/TR 16576:2017 Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria
    NFPA 289 : 2013 STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES
    BS ISO 15791-1 : 2002 AMD 15256 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
    DD ISO/TS 5658-1:2006 Reaction to fire tests. Spread of flame Guidance on flame spread
    ASTM E 1590 : 2017 : REDLINE Standard Test Method for Fire Testing of Mattresses
    ISO 14886:2014 Ships and marine technology Large yachts Structural fire protection for FRP yachts
    I.S. EN ISO 25762:2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
    ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
    ISO 13784-1:2014 Reaction to fire test for sandwich panel building systems — Part 1: Small room test
    ISO 14696:2009 Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
    ISO/TR 11696-2:1999 Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
    BS EN ISO 10093:1999 Plastics. Fire tests. Standard ignition sources
    BS EN 60695-8-2:2017 Fire hazard testing Heat release. Summary and relevance of test methods
    09/30193524 DC : 0 BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY
    UNE-EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
    ISO 10093:1998 Plastics Fire tests Standard ignition sources
    IEC TR 62222:2012 Fire performance of communication cables installed in buildings
    UNE-EN 16069:2013 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
    ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
    ISO 25762:2009 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
    EN ISO 10093:1998 PLASTICS - FIRE TESTS - STANDARD IGNITION SOURCES
    EN 16069:2012+A1:2015 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
    EN 14309:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
    EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
    ISO 3008-2:2017 Fire-resistance tests — Part 2: Lift landing door assemblies
    BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
    13/30292037 DC : 0 BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS
    16/30331280 DC (published 2016-04) BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies
    06/30133753 DC : DRAFT MAY 2006 ISO 24473 - FIRE TESTS - OPEN CALORIMETRY - MEASUREMENT OF THE RATE OF PRODUCTION OF HEAT AND COMBUSTION PRODUCTS FOR FIRES OF UP TO 20MW
    12/30211334 DC : 0 BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO/DIS 15791-1:2012)
    PD ISO/TS 5660-3:2012 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement
    UNE-ISO 16733-1:2017 Fire safety engineering.Selection of design fire scenarios and design fires.Part 1: Selection of design fire scenarios
    MIL-DTL-24688 Revision A:2011 INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM
    BS ISO 14886:2014 Ships and marine technology. Large yachts. Structural fire protection for FRP yachts
    BS ISO 14697:2007 Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
    PD 7974-1:2003 Application of fire safety engineering principles to the design of buildings Initiation and development of fire within the enclosure of origin (Sub-system 1)
    IEC 60695-1-12:2015 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
    UNE-EN 45545-2:2013 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
    ISO 24678-6:2016 Fire safety engineering — Requirements governing algebraic formulae — Part 6: Flashover related phenomena
    ISO/TR 16576:2017 Fire safety engineering Examples of fire safety objectives, functional requirements and safety criteria
    ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace
    ISO/TS 5658-1:2006 Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
    ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
    ISO 29904:2013 Fire chemistry — Generation and measurement of aerosols
    DIN EN ISO 15791-1:2014-05 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
    13/30277762 DC : 0 BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
    PD IEC/TR 60695-8-2:2008 Fire hazard testing Heat release. Summary and relevance of test methods
    EN 50399 : 2011 AMD 1 2016 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective