Skip to content
Please enter a keyword to search

  • ISO/ASTM 51401:2013

    Current The latest, up-to-date edition.

    Practice for use of a dichromate dosimetry system

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  05-11-2013

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO/ASTM 51401:2013 covers the preparation, testing, and procedure for using the acidic aqueous silver dichromate dosimetry system to measure absorbed dose to water when exposed to ionizing radiation. The system consists of a dosimeter and appropriate analytical instrumentation. For simplicity, the system will be referred to as the dichromate system. The dichromate dosimeter is classified as a type I dosimeter on the basis of the effect of influence quantities. The dichromate system can be used as either a reference standard dosimetry system or a routine dosimetry system.

    ISO/ASTM 51401:2013 is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ISO/ASTM Practice 52628 for the dichromate dosimetry system. It is intended to be read in conjunction with ISO/ASTM Practice 52628.

    ISO/ASTM 51401:2013 describes the spectrophotometric analysis procedures for the dichromate system. It applies only to gamma radiation, X-radiation/bremsstrahlung, and high energy electrons.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 85
    Development Note Supersedes ASTM E 1401 (05/2002) Supersedes ISO 15561 (06/2002) Supersedes ISO/ASTM DIS 51401. (11/2013)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    14/30286829 DC : 0 BS ISO 12749-4 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 4: DOSIMETRY FOR RADIATION PROCESSING
    04/30118691 DC : DRAFT AUG 2004 BS ISO ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV
    CSA Z11137-3 : 2007 : R2012 : FR STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    DIN EN ISO 11137-3:2015-08 (Draft) STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    13/30264511 DC : 0 BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING
    04/30081279 DC : DRAFT MAY 2004 BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    BS ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Dosimetry for radiation processing
    15/30282559 DC : 0 BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
    CSA Z11137-3 : 2007 : R2012 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    BS EN 60544-1:2013 Electrical insulating materials. Determination of the effects of ionizing radiation Radiation interaction and dosimetry
    IEC 60544-1:2013 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry
    I.S. EN ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    04/30109485 DC : DRAFT AUG 2004 ISO 51431 - PRACTICE FOR DOSIMETRY IN ELECTRON BEAM AND X-RAY (BREMSSTRAHLUNG) IRRADIATION FACILITIES FOR FOOD PROCESSING
    CEI EN 60544-1 : 2014 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY
    04/30108659 DC : DRAFT FEB 2004 ISO 51204 - PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR FOOD PROCESSING
    CAN/CSA-ISO 11137-3:17 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06)
    ISO/ASTM 51204:2004 Practice for dosimetry in gamma irradiation facilities for food processing
    ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection Vocabulary Part 4: Dosimetry for radiation processing
    CSA Z11137-3 : 2007 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    04/30109483 DC : DRAFT AUG 2004 BS ISO ASTM 51608 - PRACTICE FOR DOSIMETRY IN AN X-RAY (BREMSSTRAHLUNG) FACILITY FOR RADIATION PROCESSING
    CSA Z11137-3 :2007 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    I.S. EN 60544-1:2013 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY (IEC 60544-1:2013 (EQV))
    ANSI/AAMI/ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
    ISO 11137-3:2017 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control
    EN ISO 11137-3:2017 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017)
    04/30108670 DC : DRAFT FEB 2004 ISO 51702 - PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR RADIATION PROCESSING
    12/30259937 DC : 0 BS EN 50544-1 - ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY
    CSA Z11137-3 : 2007 : R2016 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
    BS EN ISO 11137-3:2017 Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control
    EN 60544-1:2013 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
    ASTM E 275 : 2008 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
    ASTM E 170 : 2017 : REDLINE Standard Terminology Relating to Radiation Measurements and Dosimetry
    ASTM E 668 : 2013 : REDLINE Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
    ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
    ASTM E 666 : 2014 : REDLINE Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
    ASTM E 958 : 2013 : REDLINE Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective