BS ISO 21748:2017
|
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
02/101929 DC : DRAFT FEB 2002
|
PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
BS EN 15309:2007
|
Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence |
BS ISO 16042:2007
|
Iron ores. Guidelines for the use of certified reference materials (CRMs) |
OIML D 18 : 2008
|
THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES |
13/30272291 DC : 0
|
BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
BS ISO 14606:2015
|
Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials |
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
11/30214536 DC : 0
|
BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
BIS IS 15393-6 : 2003(R2009)
|
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
03/300854 DC : DRAFT JAN 2003
|
ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
ISO Guide 32:1997
|
Calibration in analytical chemistry and use of certified reference materials |
BS ISO 5725-4:1994
|
Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of the trueness of a standard measurement method |
08/30182372 DC : DRAFT JULY 2008
|
BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
DIN ISO 22309:2015-11
|
MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE (ISO 22309:2011) |
EN ISO 17511:2003
|
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
03/300855 DC : DRAFT JAN 2003
|
ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS 6068-2.91(2004) : 2004
|
WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
BS ISO 18227:2014
|
Soil quality. Determination of elemental composition by X-ray fluorescence |
BS ISO 22036:2008
|
Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES) |
ISO/TS 21748:2004
|
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
PREN ISO 13736 : DRAFT 2011
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
ISO 21748:2017
|
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
CEI UNI EN ISO/IEC 17025 : 2008
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
S.R. CEN/TR 10350:2013
|
ANALYSIS OF STEELS AND IRONS - INTERNAL LABORATORY PROCEDURE FOR CHECKING THE ACCURACY OF AN ANALYTICAL METHOD BY USING CERTIFIED REFERENCE MATERIALS |
I.S. EN ISO 15194:2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
ASTM C 1128 : 2018 : REDLINE
|
Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
DIN EN ISO 17294-1:2007-02
|
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004); German version EN ISO 17294-1:2006 |
DIN EN ISO 10993-12 E : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
BS EN 12697-38:2004
|
Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
BS EN ISO 10993-12:2012
|
Biological evaluation of medical devices Sample preparation and reference materials |
UNE-EN ISO 13736:2013
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
ISO 17511:2003
|
In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
BS EN ISO 14111:1999
|
Natural gas. Guidelines to traceability in analysis |
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
DIN EN ISO 148-3:2017-04
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
EN ISO 148-3:2016
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
UNI EN ISO 10993-12 : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
ASTM E 1724 : 1995
|
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
BS ISO 22309:2011
|
Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above |
UNI EN 15842 : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
BS EN ISO 15193:2009
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
DIN EN 15309 E : 2007
|
CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
BS 2000-524(2004) : 2004
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS ISO 23380:2013
|
Selection of methods for the determination of trace elements in coal |
DIN ISO 22309 E : 2015
|
MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE (ISO 22309:2011) |
DIN ISO 5725-2:2002-12
|
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
DIN EN 15842:2010-06
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
BS 2000-170(1998) : 1998
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
07/30157023 DC : 0
|
BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
I.S. EN ISO 17511:2003
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN BIOLOGICAL SAMPLES - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
I.S. EN ISO 2592:2017
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
BS EN ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories |
CSA ISO 10012-2 : 0
|
QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
I.S. EN ISO 148-3:2016
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
BS 2000-34(2016) : 2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
EN ISO 2592:2017
|
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
UNI EN ISO 13736 : 2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
I.S. EN ISO 15193:2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
DIN EN 12697-38:2004-10
|
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
DIN EN ISO 10993-12:2012-10
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
I.S. EN ISO 13736:2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
I.S. EN ISO 10993-8:2000
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
I.S. EN ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
I.S. EN ISO 2719:2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
I.S. EN ISO 3679:2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
UNI ISO/TR 18532 : 2010
|
Guide to the application of statistical methods for quality and standardization in the industrial sector |
PD 6532-5:2000
|
Reference materials. Guide to the contents of certificates of reference materials General requirements for the competence of reference material producers |
I.S. CWA 15261-2:2005
|
MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING |
BS EN ISO 2592:2017
|
Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
EN ISO 13736:2013
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
I.S. EN ISO 3680:2004
|
DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
03/305268 DC : DRAFT APR 2003
|
WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) FOR THE DETERMINATION OF ELEMENTS - PART 1: GENERAL GUIDELINES AND BASIC PRINCIPLES |
BS ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
ASTM E 1724 : 1995 : R2001
|
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
DIN EN 15842 E : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
ISO 22309:2011
|
Microbeam analysis — Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above |
03/317065 DC : DRAFT NOV 2003
|
ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
BS ISO 5725-3:1994
|
Accuracy (trueness and precision) of measurement methods and results Intermediate measures of the precision of a standard measurement method |
BS EN 15842:2010
|
Foodstuffs. Detection of food allergens. General considerations and validation of methods |
BS 3156-11.0.3(1997) : 1997 AMD 10655
|
ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
BS ISO 5725-1:1994
|
Accuracy (trueness and precision) of measurement methods and results General principles and definitions |
BS 2000-523(2015) : 2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
15/30301302 DC : 0
|
BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
ISO 20391-1:2018
|
Biotechnology — Cell counting — Part 1: General guidance on cell counting methods |
BIS IS/ISO/IEC 17025 : 2005 AMD 1
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
04/30122733 DC : DRAFT SEP 2004
|
BS ISO 22309 - MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY DISPERSIVE SPECTROMETRY (EDS) |
06/30145838 DC : DRAFT APR 2006
|
ISO 23380 - GUIDANCE ON THE DETERMINATION OF TRACE ELEMENTS IN COAL |
EN 14726:2005
|
Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
ISO Guide 80:2014
|
Guidance for the in-house preparation of quality control materials (QCMs) |
ASTM D 7911 : 2014
|
Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
ISO 22036:2008
|
Soil quality — Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP - AES) |
ISO Guide 34:2009
|
General requirements for the competence of reference material producers |
DIN EN ISO 3679:2015-06
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
ISO 1523:2002
|
Determination of flash point — Closed cup equilibrium method |
BS EN 14726:2005
|
Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
BS EN ISO 3680:2004
|
Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
BS EN ISO 17294-1:2006
|
Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) General guidelines |
BS EN 12287:1999
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials |
UNI EN ISO 15193 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
ISO Guide 35:2017
|
Reference materials Guidance for characterization and assessment of homogeneity and stability |
UNE-EN ISO 148-3:2017
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
DIN EN ISO 148-3:2015-09 (Draft)
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
BS EN ISO 15194:2009
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
PD ISO/TR 16476:2016
|
Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials |
06/30138176 DC : 0
|
EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
12/30271500 DC : 0
|
BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
PD ISO Guide 34:2009
|
General requirements for the competence of reference material producers |
DIN EN ISO 15194:2009-10
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
DIN ISO 22036:2009-06
|
Soil quality - Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP-AES) (ISO 22036:2008) |
BS EN ISO 148-3:2016
|
Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
CEN/TR 10350:2013
|
Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials |
ISO/TR 16476:2016
|
Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials |
DD ISO/TS 21748:2004
|
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
I.S. EN 15842:2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
BS ISO 17294-1 : 2004 AMD 16802
|
WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
16/30325304 DC : 0
|
BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
04/30103951 DC : DRAFT JUN 2004
|
|
BS ISO 5725-6:1994
|
Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values |
BS 2000-34(2002) : 2002 AMD 15248
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
PREN 45001 : DRAFT 1997
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
09/30191982 DC : 0
|
BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
DIN EN ISO 15193:2009-10
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
03/109441 DC : DRAFT JUNE 2003
|
EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
13/30285144 DC : 0
|
BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
I.S. EN 14726:2005
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
CSA ISO/TR 10017 : 2003 : R2013
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
PD ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
BS 2000-170(2013) : 2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
BS 2000-36(2002) : 2002
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
PD CEN/TR 10350:2013
|
Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials |
S.R. ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories |
ISO 14595:2014
|
Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs) |
ISO 5725-6:1994
|
Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
I.S. EN 15309:2007
|
CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
DIN EN ISO 17511:2003-11
|
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
ISO 16042:2007
|
Iron ores Guidelines for the use of certified reference materials (CRMs) |
ISO/TR 18532:2009
|
Guidance on the application of statistical methods to quality and to industrial standardization |
DIN EN ISO 13736:2013-08
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
BS EN ISO 13736:2008
|
Determination of flash point. Abel closed-cup method |
ISO 14111:1997
|
Natural gas — Guidelines to traceability in analysis |
BS EN ISO 2719:2002
|
Determination of flash point. Pensky-Martens closed cup method |
BS EN ISO 3679:2015
|
Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
UNE-EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
BS EN ISO 17511:2003
|
In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
UNE-EN ISO 10993-12:2013
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
ISO 10993-12:2012
|
Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
ISO 17294-1:2004
|
Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
ISO 15193:2009
|
In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
UNE-EN ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
ISO 3680:2004
|
Determination of flash/no flash Rapid equilibrium closed cup method |
ISO 13736:2013
|
Determination of flash point Abel closed-cup method |
UNE-EN ISO 2719:2017
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method |
EN ISO 15193:2009
|
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
EN ISO 14111:1999
|
Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
EN 15309:2007
|
Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
EN ISO 10993-8 : 2000
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
EN 15842:2010
|
Foodstuffs - Detection of food allergens - General considerations and validation of methods |
EN ISO 15194:2009
|
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
EN ISO 3680:2004
|
Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
EN ISO 1523:2002
|
Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
EN ISO 17294-1:2006
|
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
04/30105010 DC : DRAFT JUL 2004
|
ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
DIN EN 15309:2007-08
|
Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
ISO 18227:2014
|
Soil quality — Determination of elemental composition by X-ray fluorescence |
PD ISO/TS 20460:2015
|
Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
BS ISO 14595:2014
|
Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs) |
BS 2000-523(2004) : 2004
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
ISO 14606:2015
|
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials |
ISO 23380:2013
|
Selection of methods for the determination of trace elements in coal |
PD ISO GUIDE 35:2017
|
Reference materials. Guidance for characterization and assessment of homogeneity and stability |
CSA ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
EN ISO 10993-12:2012
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
97/402277 DC : DRAFT APR 1997
|
PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
00/565675 DC : DRAFT DEC 2000
|
BS EN ISO 17511 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
UNI EN ISO 15194 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
ISO/TS 20460:2015
|
Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
ANSI/AAMI/ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
DIN EN 14726 E : 2005
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
ISO 15194:2009
|
In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
BS EN ISO 1523:2002
|
Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
ISO 148-3:2016
|
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
BS EN 12286:1999
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures |
DIN EN 14726:2005-12
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
DIN EN ISO 3680:2004-07
|
DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
EN 12697-38:2004
|
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |