|
MIL-STD-2003-2 Revision A:2009
|
ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (EQUIPMENT) |
|
ASME B18.2.1 : 2012
|
SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
|
MIL-DTL-16036 Revision M:2013
|
SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD |
|
MIL-STD-129 Revision R:2014
|
Military Marking for Shipment and Storage |
|
MIL-STD-1683 Revision B:1989
|
CONNECTORS AND JACKETED CABLE, ELECTRIC, SELECTION STANDARD FOR SHIPBOARD USE |
|
MIL-STD-130 Revision N:2007
|
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
|
MIL-DTL-24640 Revision C:2011
|
CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-917 Revision F:2014
|
ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
|
MIL-STD-810 Revision G:2008
|
ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
|
MIL-DTL-83522 Revision E:2013
|
Connectors, Fiber Optic, Single Ferrule, General Specification for |
|
DOD-STD-1399-301 Revision A:1986
|
INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 301A SHIP MOTION AND ATTITUDE (METRIC) |
|
MIL-PRF-19500 Revision P:2010
|
SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
|
MIL-PRF-87252 Revision D:2015
|
COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
|
MIL-W-21965 Revision D:1988
|
WATER COOLING OF SHIPBOARD ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
|
MIL-STD-1686 Revision C:1995
|
ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
|
MIL-PRF-24712 Revision B:2014
|
COATINGS, POWDER, THERMOSETTING |
|
MIL-HDBK-2164 Revision A:1996
|
ENVIRONMENTAL STRESS SCREENING PROCESS FOR ELECTRONIC EQUIPMENT |
|
IEEE 1413.1 : 2002
|
SELECTING AND USING RELIABILITY PREDICTIONS BASED ON IEEE 1413 |
|
IEEE 3007.3-2012
|
IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
|
IEEE 1413 : 2010
|
FRAMEWORK FOR RELIABILITY PREDICTION OF HARDWARE |
|
MIL-HDBK-454 Revision B:2007
|
GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
|
MIL-HDBK-338 Revision B:1998
|
ELECTRONIC RELIABILITY DESIGN HANDBOOK |
|
MIL-STD-740-2 Base Document:1986
|
STRUCTURE BORNE VIBRATORY ACCELERATION MEASUREMENTS ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
|
MIL-PRF-28876 Revision E:2004
|
Connectors, Fiber Optic, Circular, Plug and Receptacle Style, Multiple Removable Termini, General Specification for |
|
MIL-STD-1310 Revision H:2009
|
SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
|
SAE AS 85049 : 2016
|
CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
|
MIL-DTL-32483 Base Document:2013
|
Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard |
|
MIL-STD-2042 Revision C:2016
|
FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES |
|
MIL-HDBK-263 Revision B:1994
|
ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
MIL-DTL-16878 Revision H:2012
|
WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
|
MIL-STD-461 Revision G:2015
|
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
|
NFPA 70E : 2018
|
ELECTRICAL SAFETY IN THE WORKPLACE |
|
MIL-STD-1399-300 Revision B:2008
|
ELECTRIC POWER, ALTERNATING CURRENT |
|
MIL-STD-1627 Revision C:1994
|
BENDING OF PIPE OR TUBE FOR SHIP PIPING SYSTEMS |
|
MIL S 901 : D
|
SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
|
SAE J 527 : 2013
|
BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING |
|
DOD-STD-1399-70-1 Base Document:1979
|
INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 070 - PART 1: D.C. MAGNETIC FIELD ENVIRONMENT (METRIC) |
|
MIL-STD-108 Revision E:1966
|
DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT |
|
MIL-STD-1399-390 Base Document:1987
|
INTERFACE STANDARD FOR SHIPBOARD SYSTEMS - ELECTRIC POWER, DIRECT CURRENT, (OTHER THAN SHIP'S BATTERY) FOR SUBMARINES (METRIC) |
|
IEEE 1012-2012
|
IEEE Standard for System and Software Verification and Validation |
|
MIL-STD-1472 Revision G:2012
|
HUMAN ENGINEERING |
|
MIL-DTL-24643 Revision C:2009
|
Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
|
ASTM D 1868 : 2013 : REDLINE
|
Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
|
MIL-STD-1474 Revision E:2015
|
NOISE LIMITS |
|
ASME B18.2.2 : 2015
|
NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
|
MIL-HDBK-470 Revision A:1997
|
DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1 |
|
IEEE 1584-2002
|
IEEE Guide for Performing Arc Flash Hazard Calculations |
|
MIL-DTL-24765 Revision B:2016
|
POWER SUPPLY, UNINTERRUPTIBLE, STATIC (NAVAL SHIPBOARD) |
|
MIL-STD-202 Revision H:2015
|
ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
|
MIL-DTL-2036 Revision E:2014
|
ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD |
|
GEIA STD 0008 : 2011
|
DERATING OF ELECTRONIC COMPONENTS |
|
MIL-DTL-15024 Revision F:1997
|
Plates and Tags for Identification of Equipment, General Specification for |
|
MIL-DTL-24749 Revision B:2014
|
GROUNDING STRAPS AND BOSSES, ELECTROMAGNETIC |
|
MIL-STD-1399-680 Base Document:2008
|
HIGH VOLTAGE ELECTRIC POWER, ALTERNATING CURRENT |
|
MIL-STD-681 Revision F:2012
|
IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE |
|
MIL-STD-167-1 Revision A:2005
|
MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |