Skip to content
Please enter a keyword to search

  • MIL-DTL-55302 Revision G:2009

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES

    Available format(s):  PDF

    Superseded date:  17-05-2021

    Language(s): 

    Published date: 

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. REQUIREMENTS
    4. VERIFICATION
    5. PACKAGING
    6. NOTES

    Abstract - (Show below) - (Hide below)

    Specifies connectors (plugs and receptacles) for printed circuit subassembly and their accessories, for use with single-sided printed wiring, double-sided printed wiring, and multilayer printed wiring conforming to IPC-2221 and MIL-PRF-31032, respectively.

    General Product Information - (Show below) - (Hide below)

    Committee FSC 5935
    Development Note Supersedes MIL C 55302 (E) (04/2003)
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Superseded
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-DTL-3933 Revision L:2014 Attenuators, Fixed, Space Level, Non-Space Level General Specification for
    MIL-DTL-55302-94 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE, CRIMP TYPE HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
    MIL-DTL-55302-190 Revision B:2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
    MIL-DTL-55302-163 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
    MIL-DTL-55302-110 Revision H:2006 Connectors, Printed Circuit Subassembly and Accessories: Plug, Right Angle, 30 Thru 140 Contact Positions, For Printed Wiring Boards (.100 Sq. Grid)
    MIL-DTL-55302-54 Revision C:2003 Connectors, Printed Circuit Subassembly and Accessories: Plug, Straight-Thru, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-5 Revision F:2008 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-111 Revision B:2006 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-Thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-93 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE CRIMP TYPE, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
    MIL-DTL-55302-90 Revision F:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, RIGHT ANGLE, HERMAPHRODITIC CONTACT (.100 INCH SPACING)
    MIL-DTL-55302-113 Revision F:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 30 THRU 110 CONTACT POSITIONS, CRIMP REMOVABLE CONTACTS (.100 SQ. GRID)
    MIL-DTL-55302-120 Revision B:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 128 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING)
    MIL-DTL-55302-75 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET RECEPTACLE, ELECTRICAL, POLARIZED (.100 SPACING), REMOVABLE CRIMP CONTACTS
    MIL-DTL-55302-161 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 160 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric
    MIL-DTL-55302-61 Revision G:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, AND 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-63 Revision H:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-82 Revision C:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 41, 66, 114 CONTACT POSITIONS: FOR PRINTED WIRING BOARDS (.100 X .050 OFFSET GRID)
    MIL-DTL-55302-62 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-99 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT THROUGH, HERMAPHRODITIC CONTACT, WRAPPOST REMOVABLE, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-2 Revision F:2008 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Printed Wiring Boards (.150 Spacing)
    MIL-DTL-55302-125 Revision D:2005 Connectors, Printed Circuit Subassembly and Accessories: Plug, 80 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
    MIL-DTL-55302-53 Revision C:2003 Connectors, Printed Circuit Subassembly and Accessories: Plug, Right-Angle, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-148 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE WITH PIN CONTACTS, 2 FEMALE KEYING GUIDES, 3.917 INCHES LENGTH, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-67 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories: Pin, Right Angle Plug, Electrical, Polarized for Printed Wiring Boards (.090 Spacing)
    MIL-DTL-39030 Revision F:2014 DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
    MIL-DTL-55302-144 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE WITH PIN CONTACTS, 2 FEMALE KEYING GUIDES, 1.516 INCHES LENGTH, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-155 Revision B:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, HOOD FOR PRINTED WIRING BOARDS
    MIL-STD-1353 Revision C:2014 ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF
    MIL-DTL-55302-179 Revision C:2007 Connectors, Printed Circuit Subassembly and Accessories: 4 Row, Pin Assemblies, 100 through 684 Contact Positions, for Printed Wiring Boards(.100 Spacing)
    MIL-DTL-55302-92 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
    MIL-DTL-15370 Revision K:2015 COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
    IEEE DRAFT 1505 : 0 RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY
    MIL-DTL-55302-20 Revision E:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contact, Straight-Thru, for Printed Wiring Boards (.150 Spacing)
    MIL-DTL-55302-159 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
    MIL-DTL-55302-8 Revision F:2006 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-1 Revision E:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.150 SPACING)
    MIL-DTL-55302-174 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: 2 Row, Receptacle Assemblies, Right Angle, 20 through 150 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-55 Revision G:2004 Connectors, Printed Circuit Subassembly and Accessories: Plug, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-178 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: 3 Row, Pin Assemblies, Right Angle, 75 through 405 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-181 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: 4 Row, Pin Assemblies, Right Angle, 100 through 684 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-175 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: 2 Row, Pin Assemblies, Right Angle, 20 through 150 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-17 Revision B:2004 Connectors, Printed Circuit Subassembly and Accessories: Socket, Straight-Thru, for Printed Wiring Boards (.200 Spacing)
    MIL-DTL-55302-31 Revision L:2007 Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
    MIL-DTL-28837 Revision D:2015 MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
    MIL-DTL-55302-167 Revision B:2005 Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Male Brush, Straight-Through, Polarized, with Wrappost Termination (.100 Spacing)
    MIL-DTL-55302-151 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG WITH SOCKET CONTACTS, 2.717 INCHES LENGTH, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-38 Revision C:2007 Connectors, Printed Circuit Subassembly and Accessories: Plug, Electrical, Polarized Shell, Male, .100 Inch Contact Spacing Pin Terminal
    MIL-DTL-55302-134 Revision B:2005 Connectors, Printed Circuit Subassembly and Accessories: Receptacle Socket Contacts, Straight thru 32 or 64 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-71 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, SOCKET RECEPTACLE, ELECTRICAL, POLARIZED COMPOSITE CONTACT (.100 SPACING)
    MIL-DTL-55302-132 Revision C:2015 CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET CONTACTS, STRAIGHT THRU, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-27 Revision K:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, 30 THRU 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)
    MIL-DTL-55302-57 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-25 Revision F:2003 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, 120, 150, 160, AND 180 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.075 SPACING)
    MIL-DTL-55302-21 Revision F:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACT, RIGHT-ANGLE, 92 COMPOSITE CONTACT, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-6 Revision J:2005 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-141 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG WITH PIN CONTACTS, 3 KEYING PINS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    IEC 63004:2015 Standard for receiver fixture interface
    MIL-DTL-55302-7 Revision E:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-169 Revision B:2005 Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Female Brush, Straight-Through, Polarized, (.100 Spacing)
    MIL-DTL-55302-122 Revision B:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 184 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING)
    MIL-DTL-55302-164 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG AND/OR RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
    BS IEC 63003:2015 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505TM
    MIL-DTL-55302-118 Revision E:2004 Connectors, Printed Circuit Subassembly and Accessories: Plug, Decade Increment 20 through 110 and 128 Contact Positions, for Printed Wiring Boards (.050 Spacing)
    MIL-DTL-55302-89 Revision E:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, HERMAPHRODITIC CONTACTS (.100 SPACING)
    MIL-DTL-55302-18 Revision B:2004 Connectors, Printed Circuit Subassembly and Accessories: Pin, Straight-Thru, for Printed Wiring Boards (.200 Spacing)
    MIL-DTL-55302-177 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: 3 Row, Receptacle Assemblies, Right Angle, 75 through 405 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-180 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: 4 Row, Receptacle Assemblies, Right Angle, 100 through 684 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-52 Revision D:2003 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Straight-Thru, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-182 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: Guide Pins, Jackscrews and Mounting Ears
    MIL-DTL-55302-162 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
    MIL-DTL-55302-70 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE PLUG, ELECTRICAL, POLARIZED FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-142 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE WITH SOCKET CONTACTS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-24 Revision G:2003 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, DECADE INCREMENT 10 THRU 110, CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.075 SPACING)
    MIL-DTL-55302-96 Revision F:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, WRAPPOST (REMOVABLE) HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
    MIL-DTL-55302-160 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
    MIL-DTL-55302-123 Revision B:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contact, 184 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
    MIL-DTL-55302-153 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG WITH SOCKET CONTACTS, 3.917 INCHES LENGTH, 2 KEYING PINS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-4 Revision F:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-143 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE WITH SOCKET CONTACTS, 3 KEYING GUIDES, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-56 Revision H:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-192 Revision A:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 122 AND 152 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
    MIL-DTL-55302-128 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Double Row, 4 through 130 Contact Positions, for Printed Wiring Boards (.062 Inches, .093 Inches, .125 Inches) (.100 Spacing)
    MIL-DTL-55302-66 Revision G:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-69 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories: Pin Plug, Electrical, Polarized (.090 Spacing) Removable Crimp Contacts
    MIL-DTL-55302-170 Revision B:2005 Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Female Brush, Right Angle, Polarized, For Multilayered Printed Wiring Board (.100 Spacing)
    MIL-DTL-55302-133 Revision C:2005 Connectors, Plug, Electrical, Printed Circuit Subassembly and Accessories: Right Angle, Pin Contacts, 32 or 64 Contact Position for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-102 Revision E:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACT, CRIMP REMOVABLE, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-127 Revision C:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Single Row, 2 through 65 Contact Positions, for Printed Wiring Boards (.062\" , .093\" , .125\" ) (.100 Spacing)
    MIL-DTL-55302-121 Revision B:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contact, 128 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
    MIL-DTL-55302-26 Revision G:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 30 THRU 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)
    MIL-DTL-55302-32 Revision G:2004 Connectors, Printed Circuit Subassembly and Accessories: Contacts, Solder Eyelet and Wrappost Removable Types
    IEC 63003:2015 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505™
    NASA KSC E 165 : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
    NASA MSFC STD 3012 : 2012 ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE
    MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
    MIL-DTL-55302-156 Revision E:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, DECADE INCREMENTS 10 THROUGH 120, 150, 160 AND 180 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.075 SPACING)
    MIL-DTL-55302-42 Revision C:2007 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, ELECTRICAL, POLARIZED SHELL, FEMALE, .100 INCH CONTACT SPACING, REMOVABLE CRIMP CONTACTS
    MIL-DTL-55302-72 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET ENVIRONMENTAL RESISTANT, RECEPTACLE, ELECTRICAL, POLARIZED (.150 SPACING), REMOVABLE CRIMP CONTACTS
    MIL-DTL-55302-131 Revision D:2007 CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RIGHT ANGLE, PIN CONTACTS, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-124 Revision A:2006 Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
    MIL-DTL-55302-138 Revision C:2004 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin, 160 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-145 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE WITH PIN CONTACTS, 2 FEMALE KEYING GUIDES, 2.114 INCHES LENGTH, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-157 Revision B:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT THRU CONTACTS, 64 OR 96 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-168 Revision C:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, MALE BRUSH, RIGHT ANGLE, POLARIZED, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-68 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories: Socket, Receptacle, Electrical, Polarized (.090 Spacing) Removable Crimp Contacts
    MIL-DTL-55302-73 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE, ENVIRONMENTAL RESISTANT, PLUG, ELECTRICAL, POLARIZED FOR PRINTED WIRING BOARDS (.150 SPACING)
    MIL-DTL-55302-154 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, MOUNTING HARDWARE FOR PRINTED WIRING BOARDS
    MIL-DTL-55302-76 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, SOCKET STRAIGHT-THRU, POLARIZED FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-158 Revision C:2005 Connectors, Printed Circuit Subassembly and Accessories; Receptacle Socket Contacts, 64 or 96 Contact Positions, for Printed Wiring Boards (.100 Inch Spacing)
    MIL-DTL-55302-172 Revision A:2013 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: HARDWARE, COUPLING AND LOCKING
    MIL-DTL-55302-16 Revision C:2004 Connectors, Printed Circuit Subassembly and Accessories: Pin, Right-Angle, for Printed Wiring Boards (.200 Spacing)
    MIL-DTL-55302-119 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, DECADE INCREMENT 20 THROUGH 110 AND 128 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 SPACING)
    MIL-DTL-55302-97 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: CONTACTS, HERMAPHRODITIC, CRIMP REMOVABLE FOR WIRE (STRANDED)
    MIL-DTL-55302-173 Revision C:2007 Connectors, Printed Circuit Subassembly and Accessories: 2 Row, Pin Assemblies, 20 through 150 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-77 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-74 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE, PLUG, ELECTRICAL, POLARIZED FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-117 Revision E:2004 Connectors, Printed Circuit Subassembly and Accessories: Plug, Right Angle, Decade Increment 20 through 110 and 128 Contact Position, for Printed Wiring Boards (.050 Spacing)
    MIL-HDBK-1646 Base Document:2016 Selectionof Electrical Contacts, Connectors and Associated Servicing Tools
    MIL-DTL-55302-19 Revision E:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS RIGHT-ANGLE, 41 COMPOSITE CONTACT, FOR PRINTED WIRING BOARDS (.150 SPACING)
    MIL-DTL-55302-60 Revision J:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS (.100 SPACING)
    MIL-DTL-55302-147 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE WITH PIN CONTACTS, 2 FEMALE KEYING GUIDES, 3.315 INCHES LENGTH, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-65 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-191 Revision C:2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
    MIL-DTL-55302-140 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG WITH PIN CONTACTS, 2 KEYING PINS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-23 Revision H:2003 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, DECADE INCREMENT 10 THRU 120, 150, 160 AND 180 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.075 SPACING)
    MIL-DTL-55302-95 Revision E:2004 Connectors, Printed Circuit Subassembly and Accessories: Plug, Composite Wrappost, Hermaphroditic Contacts (.100 Inch Spacing)
    MIL-DTL-55302-64 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    BS IEC 63004:2015 Standard for receiver fixture interface
    MIL-DTL-55302-152 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG WITH SOCKET CONTACTS, 3.315 INCHES LENGTH, 2 KEYING PINS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-193 Revision B:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 122 AND 152 POSITION, PRINTED WIRING BOARD (.075 SPACING)
    MIL-DTL-55302-59 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-176 Revision C:2007 Connectors, Printed Circuit Subassembly and Accessories: 3 Row, Pin Assemblies, 75 through 405 Contact Positions, for Printed Wiring Boards (.100 Spacing)
    MIL-DTL-55302-126 Revision D:2005 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, 80 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
    MIL-DTL-55302-83 Revision C:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 41, 66, 114 CONTACT POSITIONS: FOR PRINTED WIRING BOARDS (.100 X .050 OFFSET GRID)
    MIL-DTL-55302-146 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND RECEPTACLE WITH PIN CONTACTS, 2 FEMALE KEYING GUIDES, 2.717 INCHES LENGTH, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-84 Revision C:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: CONTACTS - CRIMP, DIP SOLDER TAIL, SOLDER TURRET, AND WIREWRAP
    MIL-DTL-55302-58 Revision J:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-98 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories: Contact, Wrappost Removable Type
    MIL-DTL-55302-171 Revision B:2005 Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Contact Brush
    MIL-DTL-55302-166 Revision B:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, MALE BRUSH, STRAIGHT-THROUGH, POLARIZED, FOR MULTILAYERED PRINTING WIRING BOARDS (.100 SPACING)
    MIL-DTL-55302-149 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG WITH SOCKET CONTACTS, 1.516 INCHES LENGTH, 2 KEYING PINS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-78 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories: Key, Polarizing, Connectors, Electrical Printed Wiring Boards
    MIL-DTL-28875 Revision C:2012 Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for
    MIL-DTL-55302-150 Revision C:2005 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG WITH SOCKET CONTACTS, 2.114 INCHES LENGTH, 2 KEYING PINS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)
    MIL-DTL-55302-91 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
    MIL-DTL-55302-22 Revision F:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM B 134/B134M : 2015 : REDLINE Standard Specification for Brass Wire
    MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
    ASTM B 301/B301M : 2013 : REDLINE Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
    ANSI/NCSL Z540 3 : 2006(R2013) REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
    MIL-STD-202-210 Base Document:2015 METHOD 210, RESISTANCE TO SOLDERING HEAT
    ASTM D 4067 : 2016 : REDLINE Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
    SAE AMS QQ N 290 : 2015 NICKEL PLATING (ELECTRODEPOSITED)
    SAE AMS 2418 : 2017 PLATING, COPPER
    ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
    ASTM B 121/B121M : 2016 : REDLINE Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
    MIL-STD-889 Revision C:2016 DISSIMILAR METALS
    MIL-DTL-14072 Revision F:2013 FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
    MIL-PRF-31032 Revision C:2016 Printed Circuit Board/Printed Wiring Board, General Specification for
    ASTM B 441 : 2016 : REDLINE Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
    ASTM D 5138 : 2016 : REDLINE Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
    IPC 2221B:2012 GENERIC STANDARD ON PRINTED BOARD DESIGN
    ASTM D 5927 : 2017 : REDLINE Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
    SAE AMS 5514 : 2012 STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED
    ASTM B 103/B103M : 2015 : REDLINE Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
    ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
    ASTM B 194 : 2015 : REDLINE Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
    SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
    MIL-STD-202-208 Base Document:2015 METHOD 208, SOLDERABILITY
    MIL-M-24519 Revision E:1992 MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC
    MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
    SAE AMS P 81728 : 2015 PLATING, TIN-LEAD (ELECTRODEPOSITED)
    MIL-STD-1285 Revision D:2004 MARKING OF ELECTRICAL AND ELECTRONIC PARTS
    ASTM A 342/A342M : 2014 : REDLINE Standard Test Methods for Permeability of Weakly Magnetic Materials
    FED-STD-H28 Revision A:1994 Screw-Thread Standards for Federal Services
    EIA 557 : 2006 STATISTICAL PROCESS CONTROL SYSTEMS
    NEMA HP 3 : 2012 INSULATED HIGH TEMPERATURE HOOK-UP WIRE; TYPES ET (250 VOLTS), E (600 VOLTS), AND EE (1000 VOLTS)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective