Skip to content
Please enter a keyword to search

  • MIL-DTL-83522 Revision E:2013

    Current The latest, up-to-date edition.

    Connectors, Fiber Optic, Single Ferrule, General Specification for

    Available format(s):  PDF

    Language(s): 

    Published date:  17-05-2013

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. REQUIREMENTS
    4. VERIFICATION
    5. PACKAGING
    6. NOTES

    Abstract - (Show below) - (Hide below)

    Describes the characteristics, performance and testing criteria for single ferrule fiber optic connectors.

    Scope - (Show below) - (Hide below)

    This specification defines the characteristics, performance and testing criteria for single ferrule fiber optic connectors. The connectors described herein cover families as listed in 1.2. The connectors are supplied under a MIL-STD-790 reliability assurance program. See 6.1 for restrictions on intended use and applications.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes MIL C 83522 (D). (05/2013)
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-STD-1678-6 Revision A:2016 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 6: PARTS AND SUPPORT EQUIPMENT COMMONALITY AND STANDARDIZATION REQUIREMENTS (PART 6 OF 6 PARTS)
    MIL-DTL-32529 Base Document:2015 POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD
    MIL-STD-2042-6 Revision C:2016 FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (TESTS) (PART 6 OF 7 PARTS)
    MIL-DTL-32483 Base Document:2013 Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard
    MIL-STD-1678-1 Revision D:2016 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS)
    MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
    MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
    MIL-DTL-83522-16 Revision C:2013 Connector, Fiber Optic, Single Terminus, Plug, Bayonet Coupling (ST Style), 2.5 Millimeters Diameter Ferrule, Epoxy
    MIL-DTL-83522-17 Revision C:2013 CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, ADAPTER, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETER DIAMETER FERRULE, BULKHEAD PANEL MOUNT
    MIL-STD-1678-2 Revision A:2013 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS)
    MIL-STD-2042-1 Revision C:2016 FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLES) (PART 1 OF 7 PARTS)
    MIL-STD-2042-5 Revision C:2016 FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS AND INTERCONNECTIONS) (PART 5 OF 7 PARTS)

    Standards Referencing This Book - (Show below) - (Hide below)

    TIA 455-14 : A1992(R2012) FIBER OPTIC SHOCK TEST (SPECIFIED PULSE)
    MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
    TIA/EIA 455-71 : A1999(R2014) PROCEDURE TO MEASURE TEMPERATURE-SHOCK EFFECTS ON FIBER OPTIC COMPONENTS
    TIA/EIA 455-11 : D2010(R2014) FOTP-11 - VIBRATION TEST PROCEDURE FOR FIBER OPTIC COMPONENTS AND CABLES
    TIA/EIA 455-1 : B1998(R2008) CABLE FLEXING FOR FIBER OPTIC INTERCONNECTING DEVICES
    ASTM D 1430 : 2017 : REDLINE Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
    NASA STD 6001 : 2011 FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
    TIA 455-12 : B2008(R2013) FLUID IMMERSION TEST FOR FIBER OPTIC COMPONENTS - FOTP-12
    MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
    TIA 455-36 : A1986(R2012) FOTP-36 - TWIST TEST FOR FIBER OPTIC CONNECTING DEVICES
    TIA 455-21 : A1988(R2012) FOTP-21 MATING DURABILITY FOR FIBER OPTIC INTERCONNECTING DEVICES
    ASTM D 6778 : 2014 : REDLINE Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
    ASTM E 595 : 2015 : REDLINE Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
    MIL-DTL-901 Revision E:2017 Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for
    ASTM B 121/B121M : 2016 : REDLINE Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
    MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
    MIL-STD-889 Revision C:2016 DISSIMILAR METALS
    TIA 455-189 : 1992(R2012) OZONE EXPOSURE TEST FOR FIBER OPTIC COMPONENTS
    A-A-59588 Revision B:2012 Rubber, Silicone
    TIA/EIA 455-4 : C2002(R2014) FIBER OPTIC COMPONENT TEMPERATURE LIFE TEST
    TIA/EIA 455-3 : B2009(R2014) PROCEDURE TO MEASURE TEMPERATURE CYCLING EFFECTS ON OPTICAL FIBER UNITS, OPTICAL CABLE, AND OTHER PASSIVE FIBER COMPONENTS
    TIA 455-107 : A1999 DETERMINATION OF COMPONENT REFLECTANCE OR LINK/SYSTEM RETURN LOSS USING A LOSS TEST SET
    TIA 455-64 : 1998(R2002) PROCEDURE FOR MEASURING RADIATION-INDUCED ATTENUATION IN OPTICAL FIBERS AND OPTICAL CABLES
    SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
    TIA 455-20 : B2004(R2013) OPTICAL FIBRES - PART 1-46: MEASUREMENT METHODS AND TEST PROCEDURES - MONITORING OF CHANGES IN OPTICAL TRANSMITTANCE
    MIL-STD-790 Revision G:2011 ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS
    MIL-STD-1678-1 Revision D:2016 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS)
    SAE AMS QQ A 225 : 2012 ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR
    MIL-DTL-55330 Revision C:2001 CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
    ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
    SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
    TIA/EIA 455-5 : C2002 HUMIDITY TEST PROCEDURE FOR FIBER OPTIC COMPONENTS
    TIA/EIA 455-34 : A1995(R2002) INTERCONNECTION DEVICE INSERTION LOSS TEST
    MIL-STD-202-110 Base Document:2015 METHOD 110, SAND AND DUST
    MIL-STD-1678-2 Revision A:2013 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS)
    MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
    TIA/EIA 455-32 : A1990(R2008) FOTP-32 - FIBER OPTIC CIRCUIT DISCONTINUITIES
    MIL-STD-1285 Revision D:2004 MARKING OF ELECTRICAL AND ELECTRONIC PARTS
    TIA 455-22 : B1993(R2012) AMBIENT LIGHT SUSCEPTIBILITY OF FIBER OPTIC COMPONENTS
    MIL-STD-1678-3 Revision C:2016 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS)
    TIA 455-6 : B1992(R2012) CABLE RETENTION TEST PROCEDURE FOR FIBER OPTIC CABLE INTERCONNECTING DEVICES
    TIA 455-56 : C2009(R2017) TEST METHOD FOR EVALUATING FUNGUS RESISTANCE OF OPTICAL FIBER AND CABLE
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective