EN ISO 1479:2011
|
Hexagon head tapping screws (ISO 1479:2011) |
EN 14399-8:2007
|
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
EN ISO 6520-1:2007
|
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
EN ISO 15481 : 1999
|
CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15481:1999) |
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN ISO 3834-3:2005
|
Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
EN 1337-6:2004
|
Structural bearings - Part 6: Rocker bearings |
EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN 754-3:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
EN ISO 7049:2011
|
Cross-recessed pan head tapping screws (ISO 7049:2011) |
EN 754-7:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
EN ISO 3834-2:2005
|
Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
EN ISO 7091 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
EN 755-5:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
EN ISO 6789:2003
|
Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
EN 1301-1:2008
|
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
EN ISO 7094:2000/AC:2002
|
PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
EN 14399-3:2015
|
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
EN ISO 7093-2 : 2000
|
PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
EN ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN 573-2:1994
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
EN 1337-4:2004/AC:2007
|
STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
EN 1011-4:2000/A1:2003
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN 1321:1996
|
Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
EN ISO 4288 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
EN 485-3:2003
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
EN ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
EN 755-9:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
ISO 8322-2:1989
|
Building construction Measuring instruments Procedures for determining accuracy in use Part 2: Measuring tapes |
EN ISO 3834-4:2005
|
Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005) |
EN ISO 1481:2011
|
Slotted pan head tapping screws (ISO 1481:2011) |
EN 485-4:1993
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
EN 755-3:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
EN 1714:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
EN ISO 7090 : 2000
|
PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000) |
EN 1999-1-1:2007/A2:2013
|
EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
ISO 17123-7:2005
|
Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 7: Optical plumbing instruments |
ISO 10509:2012
|
Hexagon flange head tapping screws |
EN 1011-1:2009
|
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
EN 1999-1-4:2007/A1:2011
|
EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
EN 755-8:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
ISO 7976-2:1989
|
Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points |
EN ISO 2009:2011
|
Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
EN ISO 4063:2010
|
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN 755-4:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
EN ISO 7093-1 : 2000
|
PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000) |
EN ISO 4016:2011
|
Hexagon head bolts - Product grade C (ISO 4016:2011) |
EN ISO 4014:2011
|
Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
EN 20898-2 : 1993
|
MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
EN 586-3:2001
|
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
EN 755-7:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN ISO 9018:2015
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015) |
EN 1999-1-5:2007/AC:2009
|
EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
EN 473:2008
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles |
ISO 17123-3:2001
|
Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 3: Theodolites |
EN 1337-8:2007
|
Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
EN 12020-2:2016/AC:2017
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM |
EN 1301-3:2008
|
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
EN 754-6:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN ISO 4034:2012/AC:2013
|
HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013) |
EN 755-6:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 1337-11:1997
|
Structural bearings - Part 11: Transport, storage and installation |
EN ISO 4018:2011
|
Hexagon head screws - Product grade C (ISO 4018:2011) |
EN ISO 13920:1996
|
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
EN 1706:2010
|
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
ISO 4463-1:1989
|
Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria |
EN ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
EN 754-1:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
EN ISO 9606-2:2004
|
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General |
EN 14399-6:2015
|
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers |
EN 515:2017
|
Aluminium and aluminium alloys - Wrought products - Temper designations |
EN 754-5:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
EN ISO 7046-2:2011
|
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
EN ISO 18273:2015
|
WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015) |
EN 1337-3:2005
|
Structural bearings - Part 3: Elastomeric bearings |
EN ISO 14731:2006
|
Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 586-1:1997
|
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
EN ISO 4017:2014
|
Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
EN ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN ISO 10642:2004/A1:2012
|
HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004/AMD 1:2012) |
EN 754-8:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 14399-4:2015
|
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 1090-2:2008+A1:2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO 7976-1:1989
|
Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments |
EN 12206-1:2004
|
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
EN 14399-7:2007
|
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
EN ISO 4032:2012
|
Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
EN 1999-1-2:2007/AC:2009
|
EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
EN 14399-5:2015
|
High-strength structural bolting assemblies for preloading - Part 5: Plain washers |
EN ISO 15480 : 1999
|
HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
EN 1559-4:2015
|
Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
ISO 17123-4:2012
|
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors) |
EN 28839 : 1991
|
MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS (ISO 8839:1986) |
EN ISO 9013:2017
|
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
EN 571-1:1997
|
Non destructive testing - Penetrant testing - Part 1: General principles |
ISO 17123-1:2014
|
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory |
EN 1418:1997
|
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
EN ISO 7089 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A |
EN 970:1997
|
Non-destructive examination of fusion welds - Visual examination |
EN 1337-5:2005
|
Structural bearings - Part 5: Pot bearings |
EN 754-4:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
EN ISO 17659:2004
|
Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002) |
EN 573-1:2004
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
EN ISO 9000:2015
|
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
EN 1999-1-3:2007/A1:2011
|
EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
EN 15088:2005
|
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
EN 12020-1:2008
|
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
EN 1435:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
ISO 8062:1994
|
Castings System of dimensional tolerances and machining allowances |
EN ISO 4762:2004
|
Hexagon socket head cap screws (ISO 4762:2004) |
EN 14399-2:2015
|
High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading |
EN 1320:1996
|
Destructive tests on welds in metallic materials - Fracture test |
EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |