ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 2553:2013
|
Welding and allied processes Symbolic representation on drawings Welded joints |
PREN 304 : DRAFT 2016
|
HEATING BOILERS - TEST CODE FOR HEATING BOILERS FOR ATOMIZING OIL BURNERS |
IEC 60730-2-9:2015 RLV
|
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
EN 303-6:2000
|
Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW |
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 61000-6-3:2007/A1:2011/AC:2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
EN 60730-2-9:2010
|
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
ISO 7005-3:1988
|
Metallic flanges Part 3: Copper alloy and composite flanges |
EN 14597:2012
|
Temperature control devices and temperature limiters for heat generating systems |
EN ISO 4063:2010
|
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
EN 15456:2008
|
Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements |
ISO 7-2:2000
|
Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
IEC 61000-6-3:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
ISO 857:1990
|
Welding, brazing and soldering processes — Vocabulary |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
EN 303-4:1999
|
Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking |
EN 10021:2006
|
General technical delivery conditions for steel products |
EN 61000-6-2:2005/corrigendum:2005
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
PREN 303-2 : DRAFT 2016
|
HEATING BOILERS - PART 2: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - SPECIAL REQUIREMENTS FOR BOILERS WITH ATOMIZING OIL BURNERS |
EN ISO 9606-2:2004
|
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN 15034:2006/AC:2008
|
HEATING BOILERS - CONDENSING HEATING BOILERS FOR FUEL OIL |
ISO 185:2005
|
Grey cast irons Classification |
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
EN 10003-1 : 1994
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD |
EN 226:1987/AC1:1987
|
Atomizing oil burners - Connecting dimensions between burners and heat generators |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO 4063:2009
|
Welding and allied processes — Nomenclature of processes and reference numbers |
EN ISO 9606-1:2017
|
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
EN 15035:2006
|
Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
IEC 61000-6-2 : 3.0:2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 60730-1:2016
|
Automatic electrical controls - Part 1: General requirements |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |