EN 1859:2009+A1:2013
|
Chimneys - Metal chimneys - Test methods |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
ISO 6976:2016
|
Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
ISO 274:1975
|
Copper tubes of circular section — Dimensions |
EN 10226-2:2005
|
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
EN 12067-2:2004
|
Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 60730-2-9:2010
|
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
EN 13216-1:2004
|
Chimneys - Test methods for system chimneys - Part 1: General test methods |
ISO 7005-3:1988
|
Metallic flanges Part 3: Copper alloy and composite flanges |
EN ISO 1182:2010
|
Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 14597:2012
|
Temperature control devices and temperature limiters for heat generating systems |
EN 416-1:2009
|
Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
EN 13410:2001/AC:2002
|
GAS-FIRED OVERHEAD RADIANT HEATERS - VENTILATION REQUIREMENTS FOR NON-DOMESTIC PREMISES |
EN ISO 3166-1:2014
|
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
EN 161:2011+A3:2013
|
Automatic shut-off valves for gas burners and gas appliances |
EN 15266:2007
|
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test |
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 14459:2015
|
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
EN 437:2003+A1:2009
|
Test gases - Test pressures - Appliance categories |
EN 125:2010+A1:2015
|
Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
EN 60751:2008
|
INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 126:2012
|
Multifunctional controls for gas burning appliances |
EN 60584-1:2013
|
Thermocouples - Part 1: EMF specifications and tolerances |
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
CEN/TR 1749:2014
|
European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
EN 60335-2-102:2016
|
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 14471:2013+A1:2015
|
CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
EN 60730-2-1 : 97 AMD 11 2005
|
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES |
EN 12828:2012+A1:2014
|
Heating systems in buildings - Design for water-based heating systems |
IEC 60751:2008
|
Industrial platinum resistance thermometers and platinum temperature sensors |
IEC 60730-2-5:2013+AMD1:2017 CSV
|
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
ISO 3166-1:2013
|
Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 15502-2-1:2012+A1:2016
|
Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 60730-2-5:2015
|
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
EN 298:2012
|
Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN ISO 6976:2016
|
Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
EN 1856-1:2009
|
Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
EN 1106:2010
|
Manually operated taps for gas burning appliances |
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
IEC 60584-1:2013
|
Thermocouples - Part 1: EMF specifications and tolerances |
EN 88-1:2011+A1:2016
|
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 14800:2007
|
Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
EN 60730-1:2016
|
Automatic electrical controls - Part 1: General requirements |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |
EN 257:2010
|
Mechanical thermostats for gas-burning appliances |