|
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV
|
Information technology equipment - Safety - Part 1: General requirements |
|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
|
EN 60634:1995
|
Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires |
|
IEC 60811-3-1:1985
|
Common test methods for insulating and sheathing materials ofelectric cables - Part 3: Methods specific to PVC compounds -Section One: Pressure test at high temperature - Tests forresistance to cracking |
|
IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV
|
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
|
EN 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
|
IEC 60238:2016+AMD1:2017 CSV
|
Edison screw lampholders |
|
IEC 60061-3:2005 CSV
|
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
|
EN 62031:2008/A2:2015
|
LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014) |
|
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
|
IEC 60662:2011
|
High-pressure sodium vapour lamps - Performance specifications |
|
EN 60238 : 2004 AMD 2 2011
|
EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011) |
|
IEC 60682:1980
|
Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps |
|
EN 61347-2-9:2013
|
Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
|
EN 60065:2014/AC:2017-01
|
AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
|
IEC 60050-195:1998
|
International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
|
IEC 60634:1993
|
Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires |
|
EN 60085:2008
|
Electrical insulation - Thermal evaluation and designation |
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
|
EN 61558-1:2005/A1:2009
|
SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
|
IEC 61347-2-9:2012
|
Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
|
IEC TR 60083:2015
|
Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC |
|
IEC TR 62471-2:2009
|
Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety |
|
IEC 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
|
HD 60364-4-41:2017/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
|
EN 61199:2011/A2:2015
|
SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014) |
|
EN 60432-2:2000/A2:2012
|
INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
|
EN 60400:2017
|
Lampholders for tubular fluorescent lamps and starterholders |
|
IEC 60061-2:2005 CSV
|
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
|
IEC 60570:2003+AMD1:2017 CSV
|
Electrical supply track systems for luminaires |
|
IEC 60929:2011+AMD1:2015 CSV
|
AC and/or DC-supplied electronic control gear for tubularfluorescent lamps - Performance requirements |
|
IEC 60598-2-5:2015
|
Luminaires - Part 2-5: Particular requirements - Floodlights |
|
IEC 60400:2017
|
Lampholders for tubular fluorescent lamps and starterholders |
|
EN 61558-2-5:2010
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units |
|
IEC 61558-2-6:2009
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
|
IEC 60598-2-6:1994
|
Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
|
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
|
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
|
IEC 61199:2011+AMD1:2012+AMD2:2014 CSV
|
Single-capped fluorescent lamps - Safety specifications |
|
IEC 61167:2015
|
Metal halide lamps - Performance specification |
|
IEC 60925:1989+AMD1:1996+AMD2:2001 CSV
|
DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
|
IEC 61346-1:1996
|
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
|
EN 60357:2003/A11:2016
|
TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS |
|
IEC 60364-7-702:2010
|
Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
|
IEC 60921:2004+AMD1:2006 CSV
|
Ballasts for tubular fluorescent lamps - Performance requirements |
|
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
|
IEC 60598-2-3:2002+AMD1:2011 CSV
|
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting |
|
IEC 60901:1996+AMD1:1997+AMD2:2000 CSV
|
Single-capped fluorescent lamps - Performance specifications |
|
IEC 60364-7-701:2006
|
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower |
|
EN 60360:1998
|
Standard method of measurement of lamp cap temperature rise |
|
IEC 62035:2014+AMD1:2016 CSV
|
Discharge lamps (excluding fluorescent lamps) - Safety specifications |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements |
|
EN 60695-2-10:2013
|
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
|
EN 62035:2014
|
Discharge lamps (excluding fluorescent lamps) - Safety specifications |
|
IEC 60989:1991
|
Separating transformers, autotransformers, variable transformersand reactors. |
|
EN 61032:1998
|
Protection of persons and equipment by enclosures - Probes for verification |
|
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
IEC 80416-1:2008
|
Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration |
|
IEC 62471:2006
|
Photobiological safety of lamps and lamp systems |
|
HD 193 : 200S2
|
VOLTAGE BANDS FOR ELECTRICAL INSTALLATIONS OF BUILDINGS |
|
EN 60155:1995/A2:2007
|
GLOW-STARTERS FOR FLUORESCENT LAMPS |
|
IEC 61535:2009+AMD1:2012 CSV
|
Installation couplers intended for permanent connection in fixedinstallations |
|
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
|
EN 61058-1:2002/A2:2008
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
EN 61184:2017
|
Bayonet lampholders |
|
EN 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
|
EN 61558-2-6:2009
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
|
IEC 61558-2-5:2010
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units |
|
IEC 60695-10-2:2014
|
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
|
IEC TR 60972:1989
|
Classification and interpretation of new lighting products |
|
IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV
|
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
|
EN 60662:2012
|
High-pressure sodium vapour lamps - Performance specifications |
|
ISO 4046-4:2002
|
Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
|
EN 60432-3:2013
|
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
|
AS 3771-1998
|
Road lighting luminaires with integral control gear |
|
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
|
EN 80416-1:2009
|
Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration |
|
IEC 60155:1993
|
Glow-starters for fluorescent lamps |
|
EN 60432-1:2000/A2:2012
|
INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011) |
|
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
|
IEC 61032:1997
|
Protection of persons and equipment by enclosures - Probes for verification |
|
IEC 60923:2005+AMD1:2006 CSV
|
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
|
IEC 60432-3:2012
|
Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) |
|
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
|
IEC 60695-11-5:2016
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
|
IEC 60695-2-10:2013
|
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
|
EN 62471:2008
|
Photobiological safety of lamps and lamp systems |
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
IEC 62031:2008+AMD1:2012+AMD2:2014 CSV
|
LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS |
|
IEC 60598-2-4:2017
|
Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires |
|
IEC 61184:2017
|
Bayonet lampholders |
|
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current |
|
ISO 16893-1:2008
|
Wood-based panels Particleboard Part 1: Classifications |
|
IEC 60360:1998
|
Standard method of measurement of lamp cap temperature rise |
|
EN 60682:1993/A2:1997
|
METHOD OF MEASURING THE PINCH TEMPERATURE OF QUARTZ GLASS LAMPS |
|
IEC 61195:1999+AMD1:2012+AMD2:2014 CSV
|
Double-capped fluorescent lamps - Safety specifications |
|
EN 60990:2016
|
Methods of measurement of touch current and protective conductor current |
|
ISO 1891:2009
|
Fasteners — Terminology |