|
ISO 5167-3:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles |
|
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
|
ISO 748:2007
|
Hydrometry Measurement of liquid flow in open channels using current-meters or floats |
|
ISO 6416:2017
|
Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method |
|
ISO 4373:2008
|
Hydrometry Water level measuring devices |
|
ISO 2975-3:1976
|
Measurement of water flow in closed conduits — Tracer methods — Part 3: Constant rate injection method using radioactive tracers |
|
ISO/TR 17766:2005
|
Centrifugal pumps handling viscous liquids — Performance corrections |
|
ISO 3354:2008
|
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions |
|
IEC 60051-7:1984
|
Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7: Special requirements for multi-function instruments |
|
ISO 2975-7:1977
|
Measurement of water flow in closed conduits — Tracer methods — Part 7: Transit time method using radioactive tracers |
|
ISO 2975-1:1974
|
Measurement of water flow in closed conduits — Tracer methods — Part 1: General |
|
ISO 3740:2000
|
Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
|
ISO 5167-4:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes |
|
IEC 60193:1999
|
Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
|
ISO 2975-6:1977
|
Measurement of water flow in closed conduits — Tracer methods — Part 6: Transit time method using non-radioactive tracers |
|
IEC 60041:1991
|
Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
|
IEC 60051-2:1984
|
Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters |
|
ISO/IEC Guide 99:2007
|
International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
|
ISO 5167-2:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
|
ISO 3746:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
|
IEC 60034-2-1:2014
|
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
|
ISO 8316:1987
|
Measurement of liquid flow in closed conduits Method by collection of the liquid in a volumetric tank |
|
IEC 60051-5:1985
|
Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes |
|
ISO 6817:1992
|
Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters |
|
ISO 10816-1:1995
|
Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
|
ISO 5167-1:2003
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
|
ISO 9213:2004
|
Measurement of total discharge in open channels Electromagnetic method using a full-channel-width coil |
|
ISO 3846:2008
|
Hydrometry Open channel flow measurement using rectangular broad-crested weirs |
|
ISO 80000-1:2009
|
Quantities and units — Part 1: General |
|
ISO 2537:2007
|
Hydrometry — Rotating-element current-meters |
|
ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
|
IEC 60034-2-2:2010
|
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 |
|
ISO 7194:2008
|
Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
|
IEEE 112-2004
|
IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
|
ISO 5198:1987
|
Centrifugal, mixed flow and axial pumps Code for hydraulic performance tests Precision grade |
|
ISO 3745:2012
|
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
|
ISO 2186:2007
|
Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
|
ISO 3966:2008
|
Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
|
ISO 11201:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
|
ISO 9104:1991
|
Measurement of fluid flow in closed conduits Methods of evaluating the performance of electromagnetic flow-meters for liquids |
|
ISO 1438:2017
|
Hydrometry — Open channel flow measurement using thin-plate weirs |
|
ISO 2975-2:1975
|
Measurement of water flow in closed conduits — Tracer methods — Part 2: Constant rate injection method using non-radioactive tracers |