Skip to content
Please enter a keyword to search

  • VDI 3405 Blatt 2:2013-08

    Current The latest, up-to-date edition.

    Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing

    Available format(s):  Hardcopy, PDF

    Language(s):  German - English

    Published date:  01-08-2013

    Publisher:  Verlag des Vereins Deutscher Ingenieure

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Preliminary note
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Symbols and abbreviations
    5 Testing powdered materials
    6 Metallographic test methods
    7 Density
    8 Determining the mechanical
       characteristics
    9 Surface quality
    10 Form, dimensional and positional
       tolerances
    11 Non-destructive testing
    12 Post-production processes
    13 Heat treatment
    Annex
    Bibliography

    Abstract - (Show below) - (Hide below)

    The guideline provides recommendations for the testing of various properties of generatively manufactured metal components.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher Verlag des Vereins Deutscher Ingenieure
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    VDI 3405-2-1 : 2015 COR 2017 ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG
    VDI 3405 Blatt 3:2015-12 Additive manufacturing processes, rapid manufacturing - Design rules for part production using laser sintering and laser beam melting
    VDI 3405:2014-12 Additive manufacturing processes, rapid manufacturing - Basics, definitions, processes
    VDI 3405 Blatt 2.3:2017-07 (Draft) Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Characterisation of powder raw material
    VDI 3405 Blatt 1:2013-10 Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
    EN ISO 4287:1998/A1:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
    EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
    EN 10247:2017 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
    DIN EN ISO 6892-2:2011-05 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
    ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
    DIN 66111:1989-02 PARTICLE SIZE ANALYSIS; SEDIMENTATION ANALYSIS; PRINCIPLES
    EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
    EN 444:1994 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
    VDI 3404:2009-12 Additive fabrication - Rapid technologies (rapid prototyping) - Fundamentals, terms and definitions, quality parameters, supply agreements
    EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    DIN EN ISO 286-1:2010-11 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
    DIN EN ISO 6507-1:2016-08 (Draft) METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD
    EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
    EN ISO 286-1:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013)
    DIN EN 13320:2002-09 SURFACE ACTIVE AGENTS - GAS CHROMATOGRAPHIC TRACE DETERMINATION OF FREE ETHYLENE OXIDE IN ETHOXYLATES
    EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
    EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    DIN 66115:1983-02 PARTICLE SIZE ANALYSIS; SEDIMENTATION ANALYSIS IN THE GRAVITATIONAL FIELD; PIPETTE METHOD
    ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
    DIN EN 473:2008-09 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES
    EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
    ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
    EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
    EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)
    ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
    DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    ISO 12106:2017 Metallic materials — Fatigue testing — Axial-strain-controlled method
    DIN ISO 4497:1991-04 METALLIC POWDERS - DETERMINATION OF PARTICLE SIZE BY DRY SIEVING
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    ASTM B 213 : 2017 : REDLINE Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
    EN 10351:2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
    EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
    DIN EN ISO 6506-1:2015-02 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014)
    ISO 3953:2011 Metallic powders — Determination of tap density
    EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
    ISO 15579:2000 Metallic materials Tensile testing at low temperature
    DIN 50113:1982-03 TESTING OF METALLIC MATERIALS; ROTATING BENDING FATIGUE TEST
    DIN EN ISO 9934-1:2016-07 (Draft) NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 1: GENERAL PRINCIPLES (ISO 9934-1:2016)
    ISO 4497:1983 Metallic powders Determination of particle size by dry sieving
    EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
    ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
    DIN EN ISO 148-1:2015-09 (Draft) METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
    DIN EN 571-1:1997-03 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES
    ISO 3452-1:2013 Non-destructive testing Penetrant testing Part 1: General principles
    EN ISO 9934-1:2016 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
    DIN EN ISO 3369:2010-08 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
    DIN EN ISO 7438:2016-07 Metallic materials - Bend test (ISO 7438:2016)
    ISO 7438:2016 Metallic materials Bend test
    VDI/VDE 2616 Blatt 1:2012-08 Hardness testing of metallic materials
    EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011)
    DIN 50100:2015-11 (Draft) LOAD CONTROLLED FATIGUE TESTING - EXECUTION AND EVALUATION OF CYCLIC TESTS AT CONSTANT LOAD AMPLITUDES ON METALLIC SPECIMENS AND COMPONENTS
    DIN EN ISO 643:2015-06 (Draft) STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012)
    VDI 1000:2017-02 VDI Standardisation Work - Principles and procedures
    ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
    DIN EN 16016-2:2012-01 NON DESTRUCTIVE TESTING - RADIATION METHODS - COMPUTED TOMOGRAPHY - PART 2: PRINCIPLE, EQUIPMENT AND SAMPLES
    DIN EN 10204:2005-01 Metallic products - Types of inspection documents; German version EN 10204:2004
    ISO 3369:2006 Impermeable sintered metal materials and hardmetals Determination of density
    ISO 2768-2:1989 GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
    ISO 10076:1991 Metallic powders Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
    DIN EN 10351:2011-05 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
    DIN ISO 15579:2002-06 METALLIC MATERIALS - TENSILE TESTING AT LOW TEMPERATURE
    ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
    DIN EN ISO 18265:2014-02 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
    ISO 9934-1:2016 Non-destructive testing — Magnetic particle testing — Part 1: General principles
    DIN EN ISO 4490:2014-11 METALLIC POWDERS - DETERMINATION OF FLOW RATE BY MEANS OF A CALIBRATED FUNNEL (HALL FLOWMETER) (ISO 4490:2014)
    DIN EN 13068-3:2001-12 NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES FOR THE RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X- AND GAMMA RAYS
    EN 10204:2004 Metallic products - Types of inspection documents
    EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
    DIN EN 10247:2016-02 (Draft) MICROGRAPHIC EXAMINATION OF THE NON-METALLIC INCLUSION CONTENT OF STEELS USING STANDARD PICTURES
    ISO 643:2012 Steels Micrographic determination of the apparent grain size
    ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
    ISO 4490:2014 Metallic powders Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
    EN 16016-2:2011 Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples
    ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method
    EN 13320 : 2002 SURFACE ACTIVE AGENTS - GAS CHROMATOGRAPHIC TRACE DETERMINATION OF FREE ETHYLENE OXIDE IN ETHOXYLATES
    ISO 3923-1:2008 Metallic powders Determination of apparent density Part 1: Funnel method
    DIN 50602:1985-09 METALLOGRAPHIC TEST METHODS; MICROSCOPIC EXAMINATION OF SPECIAL STEELS USING STANDARD DIAGRAMS TO ASSESS THE CONTENT OF NON-METALLIC INCLUSIONS
    EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
    EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
    EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)
    EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
    DIN 50125:2009-07 TESTING OF METALLIC MATERIALS - TENSILE TEST PIECES
    EN ISO 18265:2013 Metallic materials - Conversion of hardness values (ISO 18265:2013)
    ISO 18265:2013 Metallic materials — Conversion of hardness values
    DIN EN 10052:1994-01 VOCABULARY OF HEAT TREATMENT TERMS FOR FERROUS PRODUCTS
    EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
    EN ISO 7438:2016 Metallic materials - Bend test (ISO 7438:2016)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective