EN 294:1992/AC:1993
|
SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
CEN Guide 414:2017
|
Safety of machinery - Rules for the drafting and presentation of safety standards |
ISO 2408:2017
|
Steel wire ropes — Requirements |
ISO 4308-1:2003
|
Cranes and lifting appliances Selection of wire ropes Part 1: General |
EN 418 : 1992
|
SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
EN 982:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
EN 1088:1995+A2:2008
|
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
CLC/TS 61496-2:2006
|
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
IEC 61310-2:2007
|
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
EN 61310-2:2008
|
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
EN 811 : 1996
|
SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
EN 349:1993+A1:2008
|
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 61310-3:2008
|
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
IEC 60947-5-3:2013
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
IEC 61310-3:2007
|
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
IEC 60947-5-1 : 4.0
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
ISO 4308-2:1988
|
Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization |
EN 1760-1:1997+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
ISO 606:2015
|
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
EN 61496-1:2013/AC:2015
|
SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
IEC 61496-1:2012
|
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
EN 983:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
EN 954-1 : 1996
|
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO 3864-3:2012
|
Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
IEC 61310-1:2007
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO 4301-1:2016
|
Cranes — Classification — Part 1: General |
1998/37/EC : 1998
|
DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
EN 60947-5-3:2013
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
EN 61310-1:2008
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
IEC 61496-2:2013
|
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |