ISO/TR 834-3:2012
|
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
ISO 6182-7:2004
|
Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers |
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
ISO 7240-15:2014
|
Fire detection and alarm systems Part 15: Point-type fire detectors using smoke and heat sensors |
ISO 834-7:2000
|
Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns |
ISO 6182-4:1993
|
Fire protection Automatic sprinkler systems Part 4: Requirements and test methods for quick-opening devices |
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration |
ISO 10093:1998
|
Plastics Fire tests Standard ignition sources |
ISO 9705:1993
|
Fire tests Full-scale room test for surface products |
ISO/TS 13571:2002
|
Life-threatening components of fire Guidelines for the estimation of time available for escape using fire data |
ISO/TR 1896:1991
|
Products in fibre-reinforced cement Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection |
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
ISO 12468-1:2013
|
External exposure of roofs to fire Part 1: Test method |
ISO 5657:1997
|
Reaction to fire tests Ignitability of building products using a radiant heat source |
ISO/TR 7240-14:2003
|
Fire detection and alarm systems Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings |
ISO 7165:2017
|
Fire fighting — Portable fire extinguishers — Performance and construction |
ISO 12472:2003
|
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals |
ISO 6182-11:2003
|
Fire protection Automatic sprinkler systems Part 11: Requirements and test methods for pipe hangers |
ISO 834-8:2002
|
Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements |
ISO 5660-2:2002
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
ISO 834-4:2000
|
Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements |
ISO 6182-1:2014
|
Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers |
ISO 7240-4:2003
|
Fire detection and alarm systems Part 4: Power supply equipment |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
ISO 13943:2017
|
Fire safety — Vocabulary |
ISO 5658-4:2001
|
Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
ISO/TR 3814:1989
|
Tests for measuring "reaction-to-fire" of building materials — Their development and application |
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test |
ISO 7240-2:2003
|
Fire detection and alarm systems Part 2: Control and indicating equipment |
ISO 5923:2012
|
Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide |
ISO 12239:2010
|
Smoke alarms using scattered light, transmitted light or ionization |
ISO/TR 9705-2:2001
|
Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance |
ISO/TR 12470:1998
|
Fire-resistance tests Guidance on the application and extension of results |
ISO 6182-5:2012
|
Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves |
ISO/TR 10158:1991
|
Principles and rationale underlying calculation methods in relation to fire resistance of structural elements |
ISO 11925-3:1997
|
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
ISO/TR 5660-3:2003
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement |
ISO 6182-2:2012
|
Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms |
ISO 3009:2003
|
Fire-resistance tests Elements of building construction Glazed elements |
ISO 7240-5:2012
|
Fire detection and alarm systems Part 5: Point-type heat detectors |
ISO 834-9:2003
|
Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements |
ISO 834-5:2000
|
Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements |
ISO/TR 5658-1:1997
|
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
ISO 834-1:1999
|
Fire-resistance tests Elements of building construction Part 1: General requirements |
ISO 7240-1:2014
|
Fire detection and alarm systems — Part 1: General and definitions |
ISO 7240-7:2011
|
Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization |
ISO 834-6:2000
|
Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams |
ISO/TR 11925-1:1999
|
Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
ISO 6182-3:2012
|
Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves |