PREN 12514-2 : DRAFT 2009
|
PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS |
EN ISO 15609-5:2011
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01) |
ISO 16135:2006
|
Industrial valves Ball valves of thermoplastics materials |
ISO 2719:2016
|
Determination of flash point Pensky-Martens closed cup method |
ISO 8015:2011
|
Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
ISO 3601-5:2015
|
Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV
|
Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
ISO 9606-4:1999
|
Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
ISO 2859-4:2002
|
Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels |
EN 682:2002/A1:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
EN ISO 15614-11:2002
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
EN 12639:2000/AC:2004
|
LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY |
EN 12864:2001/A3:2009
|
LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
ISO/IEC 17050-1:2004
|
Conformity assessment Supplier's declaration of conformity Part 1: General requirements |
ISO 2859-3:2005
|
Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
EN 13121-3:2016
|
GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
EN ISO 19879:2010
|
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
DIN 51506:2013-12
|
LUBRICANTS - VB LUBRICATING OILS WITH AND WITHOUT ADDITIVES AND VDL LUBRICATING OILS - CLASSIFICATION AND REQUIREMENTS |
EN 10079:2007
|
Definition of steel products |
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
DIN 4755:2004-11
|
Oil firing installations - Technical regulation for oil firing installation (TROe) - Testing |
EN 1503-4:2016
|
Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
EN 1708-1:2010
|
Welding - Basic welded joint details in steel - Part 1: Pressurized components |
EN 10270-3:2011
|
Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
ISO 15614-11:2002
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding |
EN 13906-1:2013
|
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs |
EN ISO 16135:2006
|
Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
ISO 9606-5:2000
|
Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
EN ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
ISO 3864-2:2016
|
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
EN 1503-3:2000/AC:2001
|
VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS |
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
EN 1503-2:2000
|
Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
DIN V 51603-6:2008-10
|
LIQUID FUELS - FUEL OILS - PART 6: FUEL OIL EL A, MINIMUM REQUIREMENTS |
2004/22/EC : 2004
|
DIRECTIVE 2004/22/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 31 MARCH 2004 ON MEASURING INSTRUMENTS |
EN 764-1:2015+A1:2016
|
Pressure equipment - Part 1: Vocabulary |
ISO 14731:2006
|
Welding coordination Tasks and responsibilities |
CEN/TR 15738:2008
|
Petroleum products - Heating fuels - Need, feasibility and required deliverables for a common European specification |
EN 1503-1:2000
|
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
EN 12954 : 2001
|
CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
PREN 12514-4 : DRAFT 2009
|
PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
EN 10151:2002
|
Stainless steel strip for springs - Technical delivery conditions |
EN ISO 15609-2:2001/A1:2003
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING |
EN ISO 9606-4:1999
|
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
EN 1:1998/A1:2007
|
FLUED OIL STOVES WITH VAPORIZING BURNERS |
EN 13341:2005+A1:2011
|
Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods |
ISO 15609-3:2004
|
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding |
ISO 2859-2:1985
|
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
EN 736-2:2016
|
Valves - Terminology - Part 2: Definition of components of valves |
EN 14125:2013
|
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
EN 14213:2003/AC:2003
|
HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
EN 303-2:2017
|
Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners |
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
EN 13906-2:2013
|
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs |
EN 472:1994
|
Pressure gauges - Vocabulary |
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
ISO 19879:2010
|
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
ISO 11114-2:2013
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
ISO 23551-1:2012
|
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
EN ISO 9606-2:2004
|
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN 62079:2001
|
Preparation of instructions - Structuring, content and presentation |
ISO 2859-10:2006
|
Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
ISO 15614-7:2016
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding |
EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
EN ISO 11114-2:2013
|
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
EN 12170:2002
|
Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator |
EN 230:2005
|
Automatic burner control systems for oil burners |
EN ISO 14731:2006
|
Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
EN 60335-2-102:2016
|
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 1333:2006
|
Flanges and their joints - Pipework components - Definition and selection of PN |
EN 10204:2004
|
Metallic products - Types of inspection documents |
IEC 62079:2001
|
Preparation of instructions - Structuring, content and presentation |
EN ISO 10497:2010
|
Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
EN 13636:2004
|
Cathodic protection of buried metallic tanks and related piping |
ISO 9001:2015
|
Quality management systems — Requirements |
EN ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
ISO 3864-1:2011
|
Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners — Specification |
DIN 51603-1:2016-08 (Draft)
|
LIQUID FUELS - FUEL OILS - PART 1: FUEL OILS EL, MINIMUM REQUIREMENTS |
ISO 15609-2:2001
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
EN 12285-1:2003
|
WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
EN 50156-1:2015
|
Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
EN ISO 9606-5:2000
|
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
ISO 15609-5:2011
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
EN 15034:2006/AC:2008
|
HEATING BOILERS - CONDENSING HEATING BOILERS FOR FUEL OIL |
ISO 10497:2010
|
Testing of valves — Fire type-testing requirements |
EN 764-2:2012
|
Pressure equipment - Part 2: Quantities, symbols and units |
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 13617-1:2012
|
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
EN ISO 15609-4:2009
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
EN ISO/IEC 17050-1:2010
|
Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols |
EN 837-1:1996/AC:1998
|
PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
EN ISO 15609-3:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004) |
EN 549:1994
|
Rubber materials for seals and diaphragms for gas appliances and gas equipment |
EN 14291:2004
|
Foam producing solutions for leak detection on gas installations |
PREN 12514-3 : DRAFT 2009
|
PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
EN 13842:2004
|
Oil fired forced convection air heaters - Stationary and transportable for space heating |
EN 837-3:1996
|
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
EN 12171:2002
|
Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator |
EN 15035:2006
|
Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
ISO 2859-5:2005
|
Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
ISO 15609-4:2009
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
EN 13160-1:2016
|
Leak detection systems - Part 1: General Principles |
OIML R 117-1 : 2007
|
DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
EN ISO 9606-3 : 1999
|
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
CLC/TR 50404:2003
|
Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
EN 14585-1:2006
|
Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
EN 60730-1:2016
|
Automatic electrical controls - Part 1: General requirements |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 9606-3:1999
|
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |