14/30303313 DC : 0

Unknown

NA Status of Standard is Unknown

PD 5304 - GUIDANCE ON SAFE USE OF MACHINERY

Available format(s): Hardcopy, PDF

Language(s): English

Published date:

Publisher: British Standards Institution

Table of Contents - (Show below) - (Hide below)

Foreword
Section 1 - General
Section 2 - Strategy for selecting protective measures
Section 3 - Risk assessment
Section 4 - Identification of hazards
Section 5 - Aspects of machine design to eliminate or
            reduce risks
Section 6 - Selection of safeguards
Section 7 - Guard design and construction
Section 8 - Protective devices
Section 9 - Interlocking
Section 10 - Safety-related control systems associated with
             protective devices
Section 11 - Installation considerations
Section 12 - Maintenance and safe working practices
Annexes
Annex A (normative) - Ergonomic data
Annex B (informative) - Common types of failures associated
        with safety-related interlocking control systems
Annex C (informative) - Essentials of a permit-to-work form
Bibliography

Abstract - (Show below) - (Hide below)

PD 5304.

General Product Information - (Show below) - (Hide below)

Comment Closes On
Committee	MCE/3
Document Type	Draft
ISBN
Pages
Published
Publisher	British Standards Institution
Status	NA

Standards Referencing This Book - (Show below) - (Hide below)

BS EN ISO 8662-13:1997	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - DIE GRINDERS
ISO 3449:2005	Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
BS EN ISO 3744:2010	Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
BS EN 1870-4:2012	Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
BS EN 1028-1 : 2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
ISO 13855:2010	Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
BS EN 12012-1 : 2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
BS EN 60204-31:2013	Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems
BS EN 860 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN 12643:2014	Earth-moving machinery. Rubber-tyred machines. Steering requirements
BS EN 12198-1 : 2000	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES
BS EN ISO 11546-1:1996	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
BS EN 12254:2010	Screens for laser working places. Safety requirements and testing
ISO 11202:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
BS EN 12629-3 : 2002	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 3: SLIDE AND TURNTABLE MACHINES
BS EN 457:1992	SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
BS EN 704 : 1999	AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
BS EN 12312-4:2014 (published 2014-04)	Aircraft ground support equipment. Specific requirements Passenger boarding bridges
BS EN 12321 : 2003	UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS
BS EN 60947-5-3:2013	Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
BS EN 60204-32:2008	Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
BS EN 811:1997	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
BS EN 12629-2 : 2002	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
BS EN 1679-1 : 1998	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS EN 1870-8:2012	Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN ISO 9902-7 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY
BS EN 12750:2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
BS EN 50260-1:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 1: GENERAL REQUIREMENTS
BS EN 294:1992	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
BS EN 536:2015	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
BS EN 1526 : 1998	SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS
BS EN ISO 14119:2013	Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
ISO 11200:2014	Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 12100-2 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
BS EN 13448 : 2002	AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
BS EN ISO 13849-1:2015	Safety of machinery. Safety-related parts of control systems General principles for design
BS EN 1175-2 : 1998	SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
BS EN 1299 : 1997	MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
ISO 3164:2013	Earth-moving machinery Laboratory evaluations of protective structures Specifications for deflection-limiting volume
IEC 60745-2-11:2003+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
BS EN ISO 11680-2:2011	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE (ISO 11680-2:2011)
BS EN ISO 3164:2013	EARTH-MOVING MACHINERY - LABORATORY EVALUATIONS OF PROTECTIVE STRUCTURES - SPECIFICATIONS FOR DEFLECTION-LIMITING VOLUME
BS EN 1005-1 : 2001	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
BS EN ISO 14122-3:2016	Safety of machinery. Permanent means of access to machinery Stairs, stepladders and guard-rails
BS EN 1889-1:2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
IEC 61029-2-1:1993	Safety of transportable motor-operated electric tools - Part 2: Particular requirements for circular saws
BS EN 981 : 1997	SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
ISO 4871:1996	Acoustics Declaration and verification of noise emission values of machinery and equipment
BS EN 1837 : 1999	SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
BS EN 1114-2 : 1998	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
BS EN 1677-2 : 2000	COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
BS EN 12525 : 2000	AGRICULTURAL MACHINERY - FRONT LOADERS - SAFETY
BS EN 972 : 1998	TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
BS EN 13021 : 2003	WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
BS EN 909 : 1999	AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
BS EN ISO 7235:2009	Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
BS EN 1870-5 : 2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 1870-3:2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
ISO 14119:2013	Safety of machinery Interlocking devices associated with guards Principles for design and selection
BS EN ISO 10472-5:2008	Safety requirements for industrial laundry machinery Flatwork ironers, feeders and folders
IEC 60335-2-91:2008	Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
ISO 12001:1996	Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
BS EN 13208 : 2003	FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1374 : 2000	AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY
ISO 11554:2017	Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
ISO 14122-3:2016	Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails
BS EN 894-3 : 2000	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
BS EN 12639:2000	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
BS EN 1093-6 : 1999	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET
BS EN 792-5 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
BS EN 13378 : 2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
BS EN ISO 3741:2009	Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
BS EN ISO 10472-4:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS
BS EN 12041:2014	FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13218 : 2002	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
ISO 14122-1:2016	Safety of machinery Permanent means of access to machinery Part 1: Choice of fixed means and general requirements of access
BS EN 12385-2 : 2002	STEEL WIRE ROPES - SAFETY - PART 2: DEFINITIONS, DESIGNATION AND CLASSIFICATION
BS EN 13736 : 2003	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
ISO 9902-2:2001	Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
BS EN 422:2009	PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
ISO 11546-2:1995	Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
BS EN 12653 : 2000	FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
BS EN ISO 12543-2:2011	Glass in building. Laminated glass and laminated safety glass Laminated safety glass
BS EN 1553:2000	AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED MOUNTED, SEMI MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS
BS EN 12547:2014	CENTRIFUGES - COMMON SAFETY REQUIREMENTS
BS EN 474-6 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS
BS EN 50260-2-1:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS
BS EN 1870-9:2012	Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
BS EN ISO 13850:2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
BS EN ISO 11681-2 : 2011	MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011)
BS EN ISO 11202:2010	Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
IEC 60204-31:2013	Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
BS EN 930 : 1997	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
BS EN 12162 : 2001	LIQUID PUMPS - SAFETY REQUIREMENTS - PROCEDURE FOR HYDROSTATIC TESTING
BS EN 12622 : 2009	SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
BS EN 706 : 1997	AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
BS EN 415-4:1998	SAFETY OF PACKAGING MACHINES - PART 4: PALLETIZERS AND DEPALLETIZERS
BS EN 12301 : 2000	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 1114-3 : 2001	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
BS EN 60745-2-11:2010 (published 2010-08)	Generic smart grid requirements Resources connected to the grid domains
IEC 61310-2:2007	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
BS EN 60947-5-5:1998	Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
BS EN 50144-2-18:2000	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-18: PARTICULAR REQUIREMENTS FOR LAMINATE TRIMMERS
BS EN 12267 : 2003	FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 9902-1:2001	Textile machinery — Noise test code — Part 1: Common requirements
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 3743-2:1994	Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
ISO 11252:2013	Lasers and laser-related equipment — Laser device — Minimum requirements for documentation
BS EN 1674:2015	FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 61029-2-9 : 2012	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS
BS EN 1677-5 : 2001	COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
BS EN ISO 12543-3:2011	Glass in building. Laminated glass and laminated safety glass Laminated glass
IEC 60947-4-1:2009+AMD1:2012 CSV	Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
BS EN ISO 9902-1 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
BS EN 60204-1 : 2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ISO 8662-9:1996	Hand-held portable power tools Measurement of vibrations at the handle Part 9: Rammers
BS EN 418:1992	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
BS EN 13732:2013	Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene
BS EN 12882:2015	Conveyor belts for general purpose use. Electrical and flammability safety requirements
BS EN 1093-3 : 2006	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
BS EN ISO 14122-1:2016	Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access
BS EN 1953:2013	Atomising and spraying equipment for coating materials. Safety requirements
BS EN 1525:1998	SAFETY OF INDUSTRIAL TRUCKS - DRIVERLESS TRUCKS AND THEIR SYSTEMS
ISO 7096:2000	Earth-moving machinery Laboratory evaluation of operator seat vibration
ISO 14120:2015	Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
BS EN 474-11 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS
BS EN 609-2 : 2000	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS
BS EN 1889-2 : 2003	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
ISO 9902-7:2001	Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
BS EN ISO 3743-2:1997	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
BS EN 415-1:2014	Safety of packaging machines Terminology and classification of packaging machines and associated equipment
BS EN ISO 11203:2009	Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN 954-1:1997	SAFETY OF MACHINERY - SAFETY RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 3411:2007	Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO 6683:2005	Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests
BS EN 61029-2-4:2011	Safety of transportable motor-operated electric tools Particular requirements for bench grinders
BS EN 563:1994	SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
BS EN 61029-2-1:2012	Safety of transportable motor-operated electric tools Particular requirements for circular saw benches
BS EN 50144-2-7:2001	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-7: PARTICULAR REQUIREMENTS FOR SPRAY GUNS
ISO 8662-12:1997	Hand-held portable power tools Measurement of vibrations at the handle Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action
BS EN ISO 8230:1998	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
IEC 60745-2-20:2003+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
ISO 7250:1996	Basic human body measurements for technological design
ISO 10326-1:2016	Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements
BS EN 792-9 : 2001	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
BS EN 60745-1 : 2009	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 1846-3:2013	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
BS EN 1678 : 1998	FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 710 : 1998	SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
ISO 9614-1:1993	Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points
BS EN 474-2 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS
BS EN 62061 : 2005	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
BS EN 12957 : 2001	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
BS EN 1492-2 : 2000	TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE
BS EN 746-3 : 1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
ISO 8662-10:1998	Hand-held portable power tools Measurement of vibrations at the handle Part 10: Nibblers and shears
BS EN 627:1996	SPECIFICATION FOR DATA LOGGING AND MONITORING OF LIFTS, ESCALATORS AND PASSENGER CONVEYORS
ISO 10218-2:2011	Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration
BS EN 13379 : 2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
ISO 8230:1997	Safety requirements for dry-cleaning machines using perchloroethylene
ISO 4413:2010	Hydraulic fluid power General rules and safety requirements for systems and their components
BS EN 547-2 : 1997	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
BS EN 614-2 : 2000	SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
BS EN 792-13 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
BS EN ISO 7250:1998	BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
BS EN 1034-3:2011	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders
BS EN ISO 9902-6 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
BS EN 1915-1:2013	Aircraft ground support equipment. General requirements Basic safety requirements
BS EN 1093-1:2008	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
BS EN 50260-2-4:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS
BS EN 500-2 : 2006	MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES
BS EN 12312-12:2017	Aircraft ground support equipment. Specific requirements Potable water service equipment
IEC 60745-2-6:2003+AMD1:2006+AMD2:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
BS EN 12012-2 : 2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
BS EN 619 : 2002
BS EN ISO 4413:2010	Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
BS EN 1033:1996	HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL
BS EN 12854 : 2003	FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13113 : 2002	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
BS EN 746-2:2010	Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
BS EN ISO 10472-2:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS
BS EN 13390 : 2002	FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 792-4 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
BS EN 620 : 2002
BS EN 60335-2-91:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
IEC 60745-2-9:2003+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
BS EN 859 : 2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
BS EN 12312-13:2017	Aircraft ground support equipment. Specific requirements Lavatory service equipment
BS EN 12965 : 2003	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
BS EN 908 : 1999	AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
BS EN ISO 12543-4:2011	Glass in building. Laminated glass and laminated safety glass Test methods for durability
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 14738:2002	Safety of machinery Anthropometric requirements for the design of workstations at machinery
ISO 3747:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
BS EN ISO 8662-7:1997	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE- WRENCHES, SCREWDRIVERS AND NUT RUNNERS WITH IMPACT, IMPULSE OR RATCHET ACTION
BS EN 13118 : 2000	AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
BS EN 13289 : 2001	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 500-1 : 2006	MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN ISO 11111:1996	Safety requirements for textile machinery
BS EN 983 : 1996	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
BS EN 792-12 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
BS EN 746-8:2000	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
BS EN 1808:2015	SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
BS EN 1218-1 : 1999	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
BS EN ISO 11102-1:2009 (published 2009-11)	Reciprocating internal combustion engines. Handle starting equipment Safety requirements and tests
IEC 60947-5-3:2013	Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
BS EN 50338:2006	SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED BATTERY POWERED ELECTRICAL LAWN MOWERS
BS EN 13524 : 2003	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
ISO 12543-3:2011	Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass
IEC 61310-3:2007	Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
BS EN 996 : 1996	PILING EQUIPMENT - SAFETY REQUIREMENTS
BS EN 815 : 1997	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
IEC 60204-11:2000	Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
ISO 11957:1996	Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 12978 : 2003	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
BS EN 13059 : 2002	SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
BS EN 60745-2-8:2009	Subsea equipment Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (U_max = 3,6 kV) to 30 kV (U_max = 36 kV)
BS EN 818-2 : 1997	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
BS EN 28662-2:1995	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 2: CHIPPING HAMMERS AND RIVETING HAMMERS
ISO 11102-1:1997	Reciprocating internal combustion engines Handle starting equipment Part 1: Safety requirements and tests
BS EN 1804-1 : 2001	MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
BS EN 12312-2:2014	Aircraft ground support equipment. Specific requirements Catering vehicles
BS EN 13411-5 : 2003	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
BS EN 1915-2 : 2001	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 2: STABILITY AND STRENGTH REQUIREMENTS, CALCULATIONS AND TEST METHODS
BS EN 12418 : 2000	MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
BS EN 13023 : 2003	NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3
BS EN ISO 11688-1:2009	Acoustics. Recommended practice for the design of low-noise machinery and equipment Planning
BS EN ISO 15744:2002	HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
BS EN 474-3 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS
BS EN 13015 : 2001	MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS
IEC 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
BS EN 1677-1 : 2000	COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
ISO 8662-6:1994	Hand-held portable power tools Measurement of vibrations at the handle Part 6: Impact drills
BS EN 574 : 1997	SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
BS EN ISO 3747:2010	Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
ISO 8662-4:1994	Hand-held portable power tools Measurement of vibrations at the handle Part 4: Grinders
BS EN 50144-2-16:2003	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-16: PARTICULAR REQUIREMENTS FOR TACKERS
IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV	Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
BS EN 1265 : 1999	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
BS EN 1807 : 1999	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
BS EN 1539:2015	DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BS EN 13627:2000	EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
BS EN 61496-1:2013	Safety of machinery. Electro-sensitive protective equipment General requirements and tests
BS EN 12505 : 2000	FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12853 : 2001	FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 50144-2-5:2000	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS AND CIRCULAR KNIVES
BS EN 50205:2002	RELAYS WITH FORCIBLY GUIDED (MECHANICALLY LINKED) CONTACTS
IEC 60745-2-17:2010	Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
BS EN 12016:2013	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
BS EN 1755:2015	Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
BS EN ISO 4871:2009	Acoustics. Declaration and verification of noise emission values of machinery and equipment
BS EN ISO 2860:2008	EARTH-MOVING MACHINERY - MINIMUM ACCESS DIMENSIONS
BS EN ISO 10472-6:2008	Safety requirements for industrial laundry machinery Ironing and fusing presses
ISO 10472-2:1997	Safety requirements for industrial laundry machinery Part 2: Washing machines and washer-extractors
BS EN ISO 6683:2008	Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests
BS EN 292-1:1991	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
BS EN ISO 11204:2010	Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
BS EN 12053 : 2001	SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS
BS EN ISO 7096:2008	Earth-moving machinery. Laboratory evaluation of operator seat vibration
BS EN 1005-3 : 2002	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION
IEC 60335-2-72:2016	Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
BS EN 12385-1 : 2002	STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 50144-2-4:2000	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS FOR SANDERS
BS EN ISO 12001:2009	Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
BS EN 1760-1 : 1998	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
BS EN 848-3:2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
BS EN 848-1 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
BS EN 61029-1 : 2009	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
BS EN 12312-1:2013	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 1: PASSENGER STAIRS
ISO 7731:2003	Ergonomics Danger signals for public and work areas Auditory danger signals
ISO 10472-6:1997	Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses
BS EN 60335-2-72:2012	Household and similar electrical appliances. Safety Particular requirements for floor treatment machines with or without traction drive, for commercial use
BS EN 60745-2-14 : 2009	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR PLANERS
IEC 61029-1:1990	Safety of transportable motor-operated electric tools - Part 1: General requirements
BS EN 12478:2001	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
ISO 12543-2:2011	Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass
BS EN 60745-2-17:2010	Hand-held motor-operated electric tools. Safety Particular requirements for routers and trimmers
BS EN ISO 9902-3 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY
BS EN 50144-2-6:2001	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS FOR HAMMERS
BS EN 13140 : 2000	AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
BS EN 50144-2-3:2002	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-3: PARTICULAR REQUIREMENTS FOR GRINDERS, DISK TYPE SANDERS AND POLISHERS
ISO 11111:1995	Safety requirements for textile machinery
BS EN 60745-2-2:2010	Hand-held motor-operated electric tools. Safety Particular requirements for screwdrivers and impact wrenches
ISO 13856-2:2013	Safety of machinery Pressure-sensitive protective devices Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
BS EN 349 : 1993	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
BS EN 60745-2-6:2010	Hand-held motor-operated electric tools. Safety Particular requirements for hammers
BS EN 12629-1 : 2001	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 115:1995	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS
BS 5499-5:2002	GRAPHIC SYMBOLS AND SIGNS - SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS - PART 5: SIGNS WITH SPECIFIC SAFETY MEANINGS
BS EN ISO 14159:2008	Safety of machinery. Hygiene requirements for the design of machinery
BS EN 614-1 : 2006	SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
BS EN 28662-5:1995	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PAVEMENT BREAKERS AND HAMMERS FOR CONSTRUCTION WORK
BS EN 201:2009	Plastics and rubber machines. Injection moulding machines. Safety requirements
BS EN 1853 : 1999	AGRICULTURAL MACHINERY - TRAILERS - SAFETY
BS EN 792-6 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
ISO 10472-4:1997	Safety requirements for industrial laundry machinery Part 4: Air dryers
BS EN 12852 : 2001	FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 61310-2:2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
BS EN 28662-3:1995	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - ROCK DRILLS AND ROTARY HAMMERS
BS EN 61800-5-1:2007	Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy
BS EN 50144-2-17:2000	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS
ISO 10472-1:1997	Safety requirements for industrial laundry machinery Part 1: Common requirements
BS EN 13112 : 2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
BS EN ISO 14738:2008	Safety of machinery. Anthropometric requirements for the design of workstations at machinery Anthropometric requirements for the design of workstations at machinery
BS EN ISO 13855:2010	Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body
BS EN ISO 8662-6:1995	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - IMPACT DRILLS
BS EN ISO 10472-3:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES
ISO 14982:1998	Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria
BS EN 453:2014	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 60745-2-20:2009	Hand-held motor-operated electric tools. Safety Particular requirements for band saws
ISO 10472-5:1997	Safety requirements for industrial laundry machinery Part 5: Flatwork ironers, feeders and folders
ISO 3471:2008	Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
BS EN ISO 12543-5:2011	Glass in building. Laminated glass and laminated safety glass Dimensions and edge finishing
BS EN 1845:2007	Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 12158-2 : 2000	BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
ISO 13853:1998	Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs
BS EN 809 : 1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
BS EN ISO 11806:2008	AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY
BS EN ISO 10472-1:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
BS EN 626-2 : 1996	SAFETY OF MACHINERY - REDUCTION OF RISK TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 2: METHODOLOGY LEADING TO VERIFICATION PROCEDURES
BS EN 818-7 : 2002	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
BS EN 547-3 : 1997	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 3: ANTHROPOMETRIC DATA
BS EN 707 : 1999	AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
BS EN 792-7 : 2001	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN 13019 : 2001	MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
BS EN ISO 11546-2:2009	Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes)
BS EN 861 : 2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS EN 1870-7:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
BS EN 1677-6 : 2001	COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
BS 6753:1986	SPECIFICATION FOR SHOTBOLTS (SOLENOID OPERATED) FOR GUARDING MACHINERY
BS EN 12385-4 : 2002	STEEL WIRE ROPES - SAFETY - PART 4: STRANDED ROPES FOR GENERAL LIFTING APPLICATIONS
BS EN 50144-2-2:2000	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-2: PARTICULAR REQUIREMENTS FOR SCREWDRIVERS AND IMPACT WRENCHES
ISO 14159:2002	Safety of machinery — Hygiene requirements for the design of machinery
ISO 8662-13:1997	Hand-held portable power tools Measurement of vibrations at the handle Part 13: Die grinders
ISO 3746:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 2860:1992	Earth-moving machinery — Minimum access dimensions
BS EN 12110:2014	Tunnelling machines. Air locks. Safety requirements
ISO 8662-5:1992	Hand-held portable power tools — Measurement of vibrations at the handle — Part 5: Pavement breakers and hammers for construction work
BS EN 12077-2 : 1999	CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES
BS EN 1870-6 : 2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
BS EN ISO 6682:2008	Earth-moving machinery. Zones of comfort and reach for controls
BS EN 60745-2-5:2010	Hand-held motor-operated electric tools. Safety Particular requirements for circular saws
BS EN 1417:2014	Plastics and rubber machines. Two-roll mills. Safety requirements
BS EN 50260-2-14:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 2-14: PARTICULAR REQUIREMENTS FOR ROUTERS AND LAMINATE TRIMMERS
BS EN 608:1995	AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE CHAIN SAWS - SAFETY
BS EN ISO 8662-12:1997	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENTS OF VIBRATIONS AT THE HANDLE - SAWS AND FILES WITH RECIPROCATING ACTION AND SAWS WITH ROTATING OR OSCILLATING ACTION
BS EN ISO 5674:2009	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
BS EN 50144-2-1:2000	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS FOR DRILLS
BS EN 50144-2-14:2001	SAFETY OF HAND HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS - SPECIFICATION FOR PLANERS
BS IEC 61496-2:1997	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS)
BS EN 13035-4 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
BS EN 746-1 : 1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
BS EN 12644-1 : 2001	CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS
BS EN 13862 : 2001	FLOOR CUTTING-OFF MACHINES - SAFETY
ISO 8662-14:1996	Hand-held portable power tools Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers
BS EN 12348 : 2000	CORE DRILLING MACHINES ON A STAND - SAFETY
BS EN ISO 11200:2014	Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN 1010-3 : 2002	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60745-2-5:2010	Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
BS EN 745 : 1999	AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
BS EN 12111:2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
BS EN ISO 11145:2016	Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
BS EN 818-5 : 1999	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
BS EN 1175-1 : 1998	SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
BS EN 50260-2-10:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 2-10: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS
IEC 61496-3:2008	Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
BS EN ISO 8662-4:1995	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - GRINDING MACHINES
BS EN 12545 : 2000	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
BS EN 12999 : 2011	CRANES - LOADER CRANES
BS EN 818-4 : 1997	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
BS EN ISO 13857:2008	Safety of machinery. Safety distances to prevent hazard zones being reached by upper and lower limbs
BS EN 61800-5-2:2017	Adjustable speed electrical power drive systems Safety requirements. Functional
BS EN 13889 : 2003	FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
BS EN 60745-2-9:2009	Hand-held motor-operated electric tools. Safety Particular requirements for tappers
BS EN 1037 : 1996	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
BS EN 30326-1 : 1994	MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS
IEC 60335-2-77:2002	Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers
BS EN ISO 11680-1:2011	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11680-1:2011)
BS EN 500-3 : 2006	MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILIZING MACHINES AND RECYCLING MACHINES
BS EN 1028-2 : 2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
BS EN 60335-2-64:2000	Specification for safety of household and similar electrical appliances Particular requirements for commercial electric kitchen machines - Commercial electric kitchen machines
BS EN 818-3 : 1999	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
BS EN 1093-9 : 1999	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
BS EN 1152:1995	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE SHAFTS - WEAR AND STRENGTH TESTS
BS EN 1550 : 1997	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
BS EN 13128 : 2001	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
BS EN 709 : 1997	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
BS EN 1547 : 2001	INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
BS EN ISO 3457:2008	Earth-moving machinery. Guards. Definitions and requirements
IEC 60947-4-2:2011	Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
BS EN ISO 8662-8:1997	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENTS OF VIBRATION AT THE HANDLE - POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS
BS EN 31253:1996	LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MECHANICAL INTERFACES
BS EN 13788:2002	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
BS EN 1248 : 2001	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
BS EN ISO 3746:2009	Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
BS EN 1494 : 2001	MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
BS EN 13114 : 2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
BS EN 12549 : 1999	ACOUSTICS - NOISE TEST CODE FOR FASTENER DRIVING TOOLS - ENGINEERING METHOD
ISO 5674:2004	Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria
BS EN 60947-5-1 : 2004	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
ISO 9902-4:2001	Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery
ISO 12543-1:2011	Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts
BS EN 982 : 1996	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
ISO 9614-3:2002	Acoustics Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning
ISO 3457:2003	Earth-moving machinery Guards Definitions and requirements
BS 7228-6:1992	INDUSTRIAL ROBOTS - RECOMMENDATIONS FOR SAFETY
BS EN 617 : 2001
BS EN 61029-2-8:2010	Safety of transportable motor-operated electric tools Particular requirements for single spindle vertical moulders
BS EN 61310-1:2008	Safety of machinery. Indication, marking and actuation Requirements for visual, acoustic and tactile signals
BS EN ISO 11957:2009	Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
BS EN 60529:1992+A2:2013	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
BS EN 13985 : 2003	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
BS EN 1012-2 : 1997	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
BS EN 60947-4-2:2012	Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters
BS EN 792-2 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
BS EN ISO 13856-2:2013	Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
BS EN 13411-1 : 2002	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS
BS EN ISO 14982:2009	AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
IEC 61496-1:2012	Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
ISO 11203:1995	Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN 13531 : 2001	EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
BS EN 50260-2-2:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 2-2: PARTICULAR REQUIREMENTS FOR SCREWDRIVERS AND IMPACT WRENCHES
IEC 60745-1:2006	Hand-held motor-operated electric tools - Safety - Part 1: General requirements
BS EN 474-9 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
BS EN 836 : 1997	GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
BS EN 1612-1 : 1997	PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
BS EN 13411-2 : 2001	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS
BS EN 12198-3 : 2002	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
BS EN 1673 : 2000	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 415-3 : 2000	SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
BS EN 1093-7 : 1999	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET
BS EN 931 : 1998	FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
BS EN ISO 8662-9:1997	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - RAMMERS
BS EN 50260-2-6:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PARTICULAR REQUIREMENTS FOR HAMMERS
BS EN 50144-2-13 : 2002	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS FOR CHAIN SAWS
BS EN 31252:1996	LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION
BS EN 609-1:2017	Agricultural and forestry machinery. Safety of log splitters Wedge splitters
BS EN 1398:2009	DOCK LEVELLERS - SAFETY REQUIREMENTS
DD CLC/TS 62046:2008	SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
BS EN 12013 : 2000	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BS EN 12198-2 : 2002	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
BS EN ISO 12543-1:2011	Glass in building. Laminated glass and laminated safety glass Definitions and description of component parts
ISO 12543-4:2011	Glass in building Laminated glass and laminated safety glass Part 4: Test methods for durability
IEC 60745-2-8:2003+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
ISO 12117:1997	Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements
ISO 13854:2017	Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
BS EN 1218-3 : 2001	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
ISO 13856-1:2013	Safety of machinery Pressure-sensitive protective devices Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
BS EN 12012-3 : 2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
BS EN 1672-2 : 2005	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
BS EN 13951:2012	Liquid pumps. Safety requirements. Agrifoodstuffs equipment; Design rules to ensure hygiene in use
BS EN 50144-2-15:2001	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS
BS EN 500-4:2011	Mobile road construction machinery. Safety Specific requirements for compaction machines
BS EN 12601:2010	Reciprocating internal combustion engine driven generating sets. Safety
BS EN 1870-1 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
BS EN 1050:1997	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
BS EN 474-4 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS
BS EN 50144-1:1999	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
BS EN 618 : 2002
BS EN ISO 9902-2 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY
BS EN ISO 14120:2015	SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
BS EN 940 : 2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS EN 13035-3 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
ISO 4414:2010	Pneumatic fluid power General rules and safety requirements for systems and their components
BS EN 12355 : 2003	FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 632:1996	AGRICULTURAL MACHINERY - COMBINE HARVESTERS AND FORAGE HARVESTERS - SAFETY
IEC 61029-2-4:1993	Safety of transportable motor-operated electric tools - Part 2: Particular requirements for bench grinders
BS EN 60947-4-1 : 2010	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
BS EN 792-10 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
ISO 13850:2015	Safety of machinery Emergency stop function Principles for design
BS EN 1454:1997	PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
BS EN ISO 8662-14:1997	HAND-HELD PORTABLE TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - STONE-WORKING TOOLS AND NEEDLE SCALERS
BS EN 1093-11 : 2001	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX
BS EN 474-5 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS
BS EN 13490 : 2002
BS EN ISO 11102-2:2009	RECIPROCATING INTERNAL COMBUSTION ENGINES - HANDLE STARTING EQUIPMENT - PART 2: METHOD OF TESTING THE ANGLE OF DISENGAGEMENT
ISO 12543-6:2011	Glass in building Laminated glass and laminated safety glass Part 6: Appearance
BS EN 61496-3:2001	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT PART - 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR)
ISO 11546-1:1995	Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
BS EN 60204-11 : 2001	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
BS EN 693 : 2001	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
IEC 61310-1:2007	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
BS EN 894-1 : 1997	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
BS EN 1677-3 : 2001	COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8
BS EN 1677-4 : 2000	COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
BS EN 474-10 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
BS EN 12312-3:2017	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 3: CONVEYOR BELT VEHICLES
BS EN 1459 : 1999	SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS
BS EN ISO 5136:2009	Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method
BS EN 13510:2000	EARTH-MOVING MACHINERY ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
ISO 11680-1:2011	Machinery for forestry Safety requirements and testing for pole-mounted powered pruners Part 1: Machines fitted with an integral combustion engine
BS EN 1114-1:2011	Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders
BS EN 690:2013	Agricultural machinery. Manure spreaders. Safety
BS EN 818-6 : 2000	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
ISO 3741:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
BS EN 12629-8 : 2002	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 8: MACHINES AND EQUIPMENT FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CALCIUM-SILICATE (AND CONCRETE)
ISO 9902-5:2001	Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery
BS EN ISO 9902-4 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
BS EN 1552:2003	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
BS EN 692 : 2005	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 1093-8 : 1999	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD
BS EN 746-4:2000	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 4: PARTICULAR SAFETY REQUIREMENTS FOR HOT DIP GALVANIZING THERMOPROCESSING EQUIPMENT
ISO 7235:2003	Acoustics Laboratory measurement procedures for ducted silencers and air-terminal units Insertion loss, flow noise and total pressure loss
ISO 11806:1997	Agricultural and forestry machinery Portable hand-held combustion engine driven brush cutters and grass trimmers Safety
BS EN 474-7 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
BS EN 1501-1 : 2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
IEC 60745-2-4:2002+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
BS EN ISO 9614-3:2009	Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV	Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
BS EN 1834-2:2000	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF ENGINES FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2 - GROUP I ENGINES FOR USE IN UNDERGROUND WORKINGS SUSCEPTIBLE TO FIREDAMP AND/OR COMBUSTIBLE DUST
ISO 8662-8:1997	Hand-held portable power tools Measurement of vibrations at the handle Part 8: Polishers and rotary, orbital and random orbital sanders
BS EN 528:2008	Rail dependent storage and retrieval equipment. Safety requirements
BS EN ISO 13856-1:2013	Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 11681-2:2011	Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service
BS EN 818-1 : 1996	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
IEC 61029-2-8:1995	Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders
BS EN 1757-2:2001	SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS
BS EN 741 : 2000	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
BS EN 1612-2 : 2000	PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
BS EN ISO 4414:2010	Pneumatic fluid power. General rules and safety requirements for systems and their components
BS EN 13155 : 2003	CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
ISO 11680-2:2011	Machinery for forestry Safety requirements and testing for pole-mounted powered pruners Part 2: Machines for use with back-pack power source
BS EN 13241-1 : 2003	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
BS EN 1551:2000	SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED TRUCKS OVER 10 000 KG CAPACITY
ISO 10472-3:1997	Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines
ISO 14122-2:2016	Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways
BS EN 1012-1:2010	Compressors and vacuum pumps. Safety requirements Air compressors
BS EN ISO 14122-2:2016	Safety of machinery. Permanent means of access to machinery Working platforms and walkways
BS EN 1974 : 1998	FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1127-1:2011	Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
BS EN 12043:2014	FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 2867:2011 (published 2011-09)	Earth-moving machinery. Access systems
BS EN 708:1997	AGRICULTURAL MACHINERY - SOIL WORKING MACHINES WITH POWERED TOOLS - SAFETY
ISO 11145:2016	Optics and photonics Lasers and laser-related equipment Vocabulary and symbols
BS EN 999 : 1999	SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
BS EN 50260-2-7 : 2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PARTICULAR REQUIREMENTS FOR SPRAY GUNS
BS EN 1846-2 : 2009	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
BS EN 13042-5 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
BS EN ISO 8662-10:1998	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - NIBBLERS AND SHEARS
IEC 61029-2-9:1995	Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitre saws
BS EN 626-1 : 1995	SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS
BS EN 28662-1:1993	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - GENERAL
BS EN 12158-1 : 2000	BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
BS EN 50144-2-10:2001	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-10: PARTICULAR REQUIREMENTS FOR JIG SAWS
BS EN 1005-2 : 2003	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
IEC 60745-2-2:2003+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
BS EN ISO 11201:2010	Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
BS EN 1757-1:2001	SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS
BS EN 792-11 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
BS EN 292-2:1991	SAFETY OF MACHINERY - BASIC CONCEPTS - GENERAL PRINCIPALS FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
BS EN 12629-4 : 2001	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES
BS EN 12733 : 2001	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
BS EN 792-1 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
BS EN 869 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
ISO 15744:2002	Hand-held non-electric power tools Noise measurement code Engineering method (grade 2)
BS EN 12415:2001	SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
BS EN 289:2014	Plastics and rubber machines. Compression moulding machines and transfer moulding machines. Safety requirements
BS EN 12409 : 2008	PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
ISO 9902-6:2001	Textile machinery Noise test code Part 6: Fabric manufacturing machinery
ISO 5136:2003	Acoustics Determination of sound power radiated into a duct by fans and other air-moving devices In-duct method
ISO 2867:2011	Earth-moving machinery Access systems
BS EN ISO 3411:2007	EARTH-MOVING MACHINERY - PHYSICAL DIMENSIONS OF OPERATORS AND MINIMUM OPERATOR SPACE ENVELOPE
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
BS EN 792-3 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
ISO 3450:2011	Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems
BS EN 1870-2:1999	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
ISO 9902-3:2001	Textile machinery — Noise test code — Part 3: Nonwoven machinery
BS EN 953 : 1998	SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
ISO 12543-5:2011	Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing
IEC 60745-2-1:2003+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
BS EN 1726-1:1999	SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INC LUDING 20000 N - PART 1: GENERAL REQUIREMENTS
ISO 11204:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
BS EN 474-8 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS
BS EN 1032 : 2003	MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
BS EN 61310-3:2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
BS EN 1804-2 : 2001	MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
BS EN 907:1997	AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - SAFETY
ISO 11691:1995	Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method
BS EN 280 : 2013	MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
BS EN 12644-2 : 2000	CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING
BS EN 786 : 1996	GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
BS EN 60745-2-4 : 2009	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS AND POLISHERS OTHER THAN DISK TYPE
BS EN ISO 9902-5 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY
IEC 60745-2-14:2003+AMD1:2006+AMD2:2010 CSV	Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
BS EN 13478 : 2002	SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
IEC 61800-5-2:2016	Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
BS EN 12840:2001	SAFETY OF MACHINE TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
BS EN 13411-4:2011	Terminations for steel wire ropes. Safety Metal and resin socketing
BS EN 1493:2010	Vehicle lifts
BS EN 848-2 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
BS EN 842 : 1996	SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
BS EN 1756-1 : 2001	TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
BS EN 547-1 : 1997	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
BS EN 60745-2-1:2010 (published 2010-06)	Hand-held motor-operated electric tools. Safety Particular requirements for drills and impact drills
BS EN ISO 3450:2011 (published 2011-11)	Earth-moving machinery. Wheeled or high-speed rubber-tracked machines. Performance requirements and test procedures for brake systems
BS EN ISO 10218-2:2011 (published 2011-07)	Robots and robotic devices. Safety requirements for industrial robots Robot systems and integration
BS EN 81-3 : 2003	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS
BS EN 12717 : 2001	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
BS EN 50260-2-5:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS AND CIRCULAR KNIVES
ISO 8662-7:1997	Hand-held portable power tools Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
BS EN ISO 11691:1997	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
BS EN 12626:1997	SAFETY OF MACHINERY - LASER PROCESSING MACHINES - SAFETY REQUIREMENTS
ISO 11102-2:1997	Reciprocating internal combustion engines Handle starting equipment Part 2: Method of testing the angle of disengagement
BS EN 1726-2:2000	Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
BS EN ISO 3743-1:2009	Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Comparison method for hard-walled test rooms
BS EN 746-5:2000	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 5: PARTICULAR SAFETY REQUIREMENTS FOR SALT BATH THERMOPROCESSING EQUIPMENT
ISO 3743-1:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
BS EN 1495 : 1998	LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
BS EN 894-2 : 1997	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV	Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function
BS EN 12268:2014	FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 792-8 : 2001	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
BS EN 1492-1 : 2000	TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
BS EN 60335-1 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
BS EN 474-1 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 454:2014	FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1175-3 : 1998	SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
BS EN ISO 11554:2017 (published 2017-10)	Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS 5760-5:1991	RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - GUIDE TO FAILURE MODES, EFFECTS AND CRITICALITY ANALYSIS (FMEA AND FMECA)
BS EN 791 : 1996	DRILL RIGS - SAFETY
BS EN 1093-4 : 1996	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD
BS EN 12417 : 2001	MACHINE TOOLS - SAFETY - MACHINING CENTRES
BS EN 1570 : 1999	SAFETY REQUIREMENTS FOR LIFTING TABLES
BS EN 60335-2.77 : 2010	SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
BS EN 1088 : 1995	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
BS EN ISO 12543-6:2011	Glass in building. Laminated glass and laminated safety glass Appearance
BS EN ISO 9614-1:2009	Acoustics. Determination of sound power levels of noise sources using sound intensity Measurement at discrete points
BS EN 774:1996	GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
BS EN 415-2:2000	Safety of packaging machines Pre-formed rigid container packaging machines

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

PD 5304.

General Product Information - (Show below) - (Hide below)

Comment Closes On
Committee	MCE/3
Document Type	Draft
ISBN
Pages
Published
Publisher	British Standards Institution
Status	NA

Standards Referencing This Book - (Show below) - (Hide below)

BS EN ISO 8662-13:1997	HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - DIE GRINDERS
ISO 3449:2005	Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
BS EN ISO 3744:2010	Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
BS EN 1870-4:2012	Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
BS EN 1028-1 : 2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
ISO 13855:2010	Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
BS EN 12012-1 : 2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
BS EN 60204-31:2013	Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems
BS EN 860 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN 12643:2014	Earth-moving machinery. Rubber-tyred machines. Steering requirements
BS EN 12198-1 : 2000	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES
BS EN ISO 11546-1:1996	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
BS EN 12254:2010	Screens for laser working places. Safety requirements and testing
ISO 11202:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
BS EN 12629-3 : 2002	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 3: SLIDE AND TURNTABLE MACHINES
BS EN 457:1992	SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
BS EN 704 : 1999	AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
BS EN 12312-4:2014 (published 2014-04)	Aircraft ground support equipment. Specific requirements Passenger boarding bridges
BS EN 12321 : 2003	UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS
BS EN 60947-5-3:2013	Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
BS EN 60204-32:2008	Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
BS EN 811:1997	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
BS EN 12629-2 : 2002	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
BS EN 1679-1 : 1998	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS EN 1870-8:2012	Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN ISO 9902-7 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY
BS EN 12750:2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
BS EN 50260-1:2002	SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 1: GENERAL REQUIREMENTS
BS EN 294:1992	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
BS EN 536:2015	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
BS EN 1526 : 1998	SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS
BS EN ISO 14119:2013	Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
ISO 11200:2014	Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 12100-2 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
BS EN 13448 : 2002	AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
BS EN ISO 13849-1:2015	Safety of machinery. Safety-related parts of control systems General principles for design
BS EN 1175-2 : 1998	SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
BS EN 1299 : 1997	MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
ISO 3164:2013	Earth-moving machinery Laboratory evaluations of protective structures Specifications for deflection-limiting volume
IEC 60745-2-11:2003+AMD1:2008 CSV	Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
BS EN ISO 11680-2:2011	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE (ISO 11680-2:2011)
BS EN ISO 3164:2013	EARTH-MOVING MACHINERY - LABORATORY EVALUATIONS OF PROTECTIVE STRUCTURES - SPECIFICATIONS FOR DEFLECTION-LIMITING VOLUME
BS EN 1005-1 : 2001	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
BS EN ISO 14122-3:2016	Safety of machinery. Permanent means of access to machinery Stairs, stepladders and guard-rails
BS EN 1889-1:2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
IEC 61029-2-1:1993	Safety of transportable motor-operated electric tools - Part 2: Particular requirements for circular saws