EN 854:2015
|
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
CEN Guide 414:2017
|
Safety of machinery - Rules for the drafting and presentation of safety standards |
EN 1746:1998
|
Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
EN 856:2015
|
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
EN 61000-6-1:2007
|
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ISO 4871:1996
|
Acoustics — Declaration and verification of noise emission values of machinery and equipment |
EN ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 547-2:1996+A1:2008
|
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
EN 50565-2:2014
|
Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types |
ISO 11546-2:1995
|
Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes) |
EN 61000-6-3:2007/A1:2011/AC:2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
ISO 3949:2009
|
Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
ISO 5598:2008
|
Fluid power systems and components Vocabulary |
ISO 9614-1:1993
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
ISO 4413:2010
|
Hydraulic fluid power General rules and safety requirements for systems and their components |
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 61310-3:2008
|
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
EN ISO 13850:2015
|
Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
IEC 61000-6-1 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
EN 1005-2:2003+A1:2008
|
Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
IEC 61310-3:2007
|
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
ISO 9614-2:1996
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
EN ISO 7751:2016
|
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016) |
EN ISO 11820 : 1996
|
ACOUSTICS - MEASUREMENTS ON SILENCERS IN SITU |
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN |
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction |
EN 857:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
ISO/TR 14121-2:2012
|
Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
EN 10210-2:2006/AC:2007
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
ISO 10619-1:2011
|
Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature |
ISO 11820:1996
|
Acoustics — Measurements on silencers in situ |
EN ISO 11201:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 6945:1996/A1:2000
|
RUBBER HOSES - DETERMINATION OF ABRASION RESISTANCE OF THE OUTER COVER |
IEC 61000-6-3:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
EN ISO 11546-2:2009
|
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
EN 764 : 1994
|
PRESSURE EQUIPMENT - TERMINOLOGY AND SYMBOLS - PRESSURE, TEMPERATURE, VOLUME |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 659:2003+A1:2008/AC:2009
|
PROTECTIVE GLOVES FOR FIREFIGHTERS |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN ISO 3744:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN ISO 9614-2 : 1996
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING |
EN ISO 3949:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
ISO 9001:2015
|
Quality management systems — Requirements |
EN ISO 12100:2010
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
ISO 7751:2016
|
Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
EN 10083-2:2006
|
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design |
EN ISO 4871:2009
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies Hydrostatic testing |
EN 853:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 837-1:1996/AC:1998
|
PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
EN ISO 4413:2010
|
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO/TR 11688-2:1998
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
EN ISO 9614-1:2009
|
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
ISO 11201:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |