|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
ISO 19840:2012
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
|
ISO 8502-3:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
|
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
|
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
|
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
|
NACE SP 01 88 : 2006
|
DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
|
ASTM D 4541 : 2017 : REDLINE
|
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
|
ASTM D 4417 : 2014 : REDLINE
|
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
|
ASTM F 21 : 2014 : REDLINE
|
Standard Test Method for Hydrophobic Surface Films by the Atomizer Test |
|
OHSAS 18001:2007
|
Occupational health and safety management systems. Requirements |
|
ASTM D 4285 : 1983 : R2018
|
Standard Test Method for Indicating Oil or Water in Compressed Air |
|
ISO 8501-3:2006
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
|
SSPC-QP 1 : 2012
|
STANDARD PROCEDURE FOR EVALUATING THE QUALIFICATIONS OF IINDUSTRIAL/MARINE PAINTING CONTRACTORS (FIELD APPLICATION TO COMPLEX INDUSTRIAL AND MARINE STEEL STRUCTURES) |
|
NACE 6A192 : 2000
|
DEHUMIDIFICATION AND TEMPERATURE CONTROL DURING SURFACE PREPARATION, APPLICATION, AND CURING FOR COATINGS/LININGS OF STEEL TANKS, VESSELS, AND OTHER ENCLOSED SPACES |
|
ASTM D 4414 : 1995
|
Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
|
ASTM D 610 : 2008
|
Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
|
NACE TM 01 74 : 2002
|
LABORATORY METHODS FOR THE EVALUATION OF PROTECTIVE COATINGS AND LINING MATERIALS ON METALLIC SUBSTRATES IN IMMERSION SERVICE |
|
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion |
|
SSPC-GUIDE 15 : 2013
|
FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES |
|
ISO 9004:2009
|
Managing for the sustained success of an organization A quality management approach |
|
SSPC-AB 1 : 2015
|
MINERAL AND SLAG ABRASIVES |
|
ISO 29601:2011
|
Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film |
|
CFR 29(PT1910.1000 TO END) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
|
ISO 10474:2013
|
Steel and steel products — Inspection documents |
|
ISO 21809-3:2016
|
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
|
EN 10204:2004
|
Metallic products - Types of inspection documents |
|
ISO 80000-1:2009
|
Quantities and units — Part 1: General |
|
ASTM G 42 : 2011 : REDLINE
|
TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES |
|
ISO 9001:2015
|
Quality management systems — Requirements |
|
SSPC-AB 2 : 2015
|
CLEANLINESS OF RECYCLED FERROUS METALLIC ABRASIVES |
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
|
ISO 8502-6:2006
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
|
ISO 8502-9:1998
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
|
SSPC-SP 5 (WAB) : 2015
|
WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1) |
|
SSPC-TR 3 : 2000
|
DEHUMIDIFICATION AND TEMPERATURE CONTROL DURING SURFACE PREPARATION, APPLICATION, AND CURING FOR COATINGS/LININGS OF STEEL TANKS, VESSELS, AND OTHER ENCLOSED SPACES |
|
ISO 11127-6:2011
|
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement |
|
ASTM D 522 : 1993 : REV A
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
|
NACE RP 02 87 : 2002
|
FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE |
|
SSPC-GUIDE 12 : 2016
|
GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS |
|
ISO 7027:1999
|
Water quality Determination of turbidity |